Blame view
drivers/hwmon/w83l786ng.c
21.7 KB
85f03bccd
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 |
/* w83l786ng.c - Linux kernel driver for hardware monitoring Copyright (c) 2007 Kevin Lo <kevlo@kevlo.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation - version 2. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ /* Supports following chips: Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA w83l786ng 3 2 2 2 0x7b 0x5ca3 yes no */ #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> /* Addresses to scan */ |
25e9c86d5
|
38 |
static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END }; |
85f03bccd
|
39 40 |
/* Insmod parameters */ |
85f03bccd
|
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 |
static int reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); #define W83L786NG_REG_IN_MIN(nr) (0x2C + (nr) * 2) #define W83L786NG_REG_IN_MAX(nr) (0x2B + (nr) * 2) #define W83L786NG_REG_IN(nr) ((nr) + 0x20) #define W83L786NG_REG_FAN(nr) ((nr) + 0x28) #define W83L786NG_REG_FAN_MIN(nr) ((nr) + 0x3B) #define W83L786NG_REG_CONFIG 0x40 #define W83L786NG_REG_ALARM1 0x41 #define W83L786NG_REG_ALARM2 0x42 #define W83L786NG_REG_GPIO_EN 0x47 #define W83L786NG_REG_MAN_ID2 0x4C #define W83L786NG_REG_MAN_ID1 0x4D #define W83L786NG_REG_CHIP_ID 0x4E #define W83L786NG_REG_DIODE 0x53 #define W83L786NG_REG_FAN_DIV 0x54 #define W83L786NG_REG_FAN_CFG 0x80 #define W83L786NG_REG_TOLERANCE 0x8D static const u8 W83L786NG_REG_TEMP[2][3] = { { 0x25, /* TEMP 0 in DataSheet */ 0x35, /* TEMP 0 Over in DataSheet */ 0x36 }, /* TEMP 0 Hyst in DataSheet */ { 0x26, /* TEMP 1 in DataSheet */ 0x37, /* TEMP 1 Over in DataSheet */ 0x38 } /* TEMP 1 Hyst in DataSheet */ }; static const u8 W83L786NG_PWM_MODE_SHIFT[] = {6, 7}; static const u8 W83L786NG_PWM_ENABLE_SHIFT[] = {2, 4}; /* FAN Duty Cycle, be used to control */ static const u8 W83L786NG_REG_PWM[] = {0x81, 0x87}; static inline u8 FAN_TO_REG(long rpm, int div) { if (rpm == 0) return 255; rpm = SENSORS_LIMIT(rpm, 1, 1000000); return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } #define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ ((val) == 255 ? 0 : \ 1350000 / ((val) * (div)))) /* for temp */ #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ : (val)) / 1000, 0, 0xff)) #define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) /* The analog voltage inputs have 8mV LSB. Since the sysfs output is in mV as would be measured on the chip input pin, need to just multiply/divide by 8 to translate from/to register values. */ #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 4) / 8), 0, 255)) #define IN_FROM_REG(val) ((val) * 8) #define DIV_FROM_REG(val) (1 << (val)) static inline u8 DIV_TO_REG(long val) { int i; val = SENSORS_LIMIT(val, 1, 128) >> 1; for (i = 0; i < 7; i++) { if (val == 0) break; val >>= 1; } return ((u8) i); } struct w83l786ng_data { |
85f03bccd
|
123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 |
struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned long last_nonvolatile; /* In jiffies, last time we update the nonvolatile registers */ u8 in[3]; u8 in_max[3]; u8 in_min[3]; u8 fan[2]; u8 fan_div[2]; u8 fan_min[2]; u8 temp_type[2]; u8 temp[2][3]; u8 pwm[2]; u8 pwm_mode[2]; /* 0->DC variable voltage 1->PWM variable duty cycle */ u8 pwm_enable[2]; /* 1->manual 2->thermal cruise (also called SmartFan I) */ u8 tolerance[2]; }; |
33468e763
|
146 147 |
static int w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id); |
310ec7921
|
148 |
static int w83l786ng_detect(struct i2c_client *client, |
33468e763
|
149 150 |
struct i2c_board_info *info); static int w83l786ng_remove(struct i2c_client *client); |
85f03bccd
|
151 152 |
static void w83l786ng_init_client(struct i2c_client *client); static struct w83l786ng_data *w83l786ng_update_device(struct device *dev); |
33468e763
|
153 |
static const struct i2c_device_id w83l786ng_id[] = { |
1f86df49d
|
154 |
{ "w83l786ng", 0 }, |
33468e763
|
155 156 157 |
{ } }; MODULE_DEVICE_TABLE(i2c, w83l786ng_id); |
85f03bccd
|
158 |
static struct i2c_driver w83l786ng_driver = { |
33468e763
|
159 |
.class = I2C_CLASS_HWMON, |
85f03bccd
|
160 161 162 |
.driver = { .name = "w83l786ng", }, |
33468e763
|
163 164 165 166 |
.probe = w83l786ng_probe, .remove = w83l786ng_remove, .id_table = w83l786ng_id, .detect = w83l786ng_detect, |
c3813d6af
|
167 |
.address_list = normal_i2c, |
85f03bccd
|
168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 |
}; static u8 w83l786ng_read_value(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } static int w83l786ng_write_value(struct i2c_client *client, u8 reg, u8 value) { return i2c_smbus_write_byte_data(client, reg, value); } /* following are the sysfs callback functions */ #define show_in_reg(reg) \ static ssize_t \ show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ int nr = to_sensor_dev_attr(attr)->index; \ struct w83l786ng_data *data = w83l786ng_update_device(dev); \ return sprintf(buf,"%d ", IN_FROM_REG(data->reg[nr])); \ } show_in_reg(in) show_in_reg(in_min) show_in_reg(in_max) #define store_in_reg(REG, reg) \ static ssize_t \ store_in_##reg (struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ int nr = to_sensor_dev_attr(attr)->index; \ struct i2c_client *client = to_i2c_client(dev); \ struct w83l786ng_data *data = i2c_get_clientdata(client); \ unsigned long val = simple_strtoul(buf, NULL, 10); \ mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ w83l786ng_write_value(client, W83L786NG_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ } store_in_reg(MIN, min) store_in_reg(MAX, max) static struct sensor_device_attribute sda_in_input[] = { SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), }; static struct sensor_device_attribute sda_in_min[] = { SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0), SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1), SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2), }; static struct sensor_device_attribute sda_in_max[] = { SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0), SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1), SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2), }; #define show_fan_reg(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ int nr = to_sensor_dev_attr(attr)->index; \ struct w83l786ng_data *data = w83l786ng_update_device(dev); \ return sprintf(buf,"%d ", \ FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); \ } show_fan_reg(fan); show_fan_reg(fan_min); static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); u32 val; val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); w83l786ng_write_value(client, W83L786NG_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct w83l786ng_data *data = w83l786ng_update_device(dev); return sprintf(buf, "%u ", DIV_FROM_REG(data->fan_div[nr])); } /* Note: we save and restore the fan minimum here, because its value is determined in part by the fan divisor. This follows the principle of least surprise; the user doesn't expect the fan minimum to change just because the divisor changed. */ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); unsigned long min; u8 tmp_fan_div; u8 fan_div_reg; u8 keep_mask = 0; u8 new_shift = 0; /* Save fan_min */ mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); data->fan_div[nr] = DIV_TO_REG(simple_strtoul(buf, NULL, 10)); switch (nr) { case 0: keep_mask = 0xf8; new_shift = 0; break; case 1: keep_mask = 0x8f; new_shift = 4; break; } fan_div_reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_DIV) & keep_mask; tmp_fan_div = (data->fan_div[nr] << new_shift) & ~keep_mask; w83l786ng_write_value(client, W83L786NG_REG_FAN_DIV, fan_div_reg | tmp_fan_div); /* Restore fan_min */ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); w83l786ng_write_value(client, W83L786NG_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute sda_fan_input[] = { SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0), SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1), }; static struct sensor_device_attribute sda_fan_min[] = { SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 0), SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 1), }; static struct sensor_device_attribute sda_fan_div[] = { SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 0), SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 1), }; /* read/write the temperature, includes measured value and limits */ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); int nr = sensor_attr->nr; int index = sensor_attr->index; struct w83l786ng_data *data = w83l786ng_update_device(dev); return sprintf(buf, "%d ", TEMP_FROM_REG(data->temp[nr][index])); } static ssize_t store_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute_2 *sensor_attr = to_sensor_dev_attr_2(attr); int nr = sensor_attr->nr; int index = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); s32 val; val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp[nr][index] = TEMP_TO_REG(val); w83l786ng_write_value(client, W83L786NG_REG_TEMP[nr][index], data->temp[nr][index]); mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute_2 sda_temp_input[] = { SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0), SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0), }; static struct sensor_device_attribute_2 sda_temp_max[] = { SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, store_temp, 0, 1), SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, store_temp, 1, 1), }; static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp, store_temp, 0, 2), SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp, store_temp, 1, 2), }; #define show_pwm_reg(reg) \ static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct w83l786ng_data *data = w83l786ng_update_device(dev); \ int nr = to_sensor_dev_attr(attr)->index; \ return sprintf(buf, "%d ", data->reg[nr]); \ } show_pwm_reg(pwm_mode) show_pwm_reg(pwm_enable) show_pwm_reg(pwm) static ssize_t store_pwm_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); u32 val = simple_strtoul(buf, NULL, 10); u8 reg; if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); data->pwm_mode[nr] = val; reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); reg &= ~(1 << W83L786NG_PWM_MODE_SHIFT[nr]); if (!val) reg |= 1 << W83L786NG_PWM_MODE_SHIFT[nr]; w83l786ng_write_value(client, W83L786NG_REG_FAN_CFG, reg); mutex_unlock(&data->update_lock); return count; } static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255); mutex_lock(&data->update_lock); data->pwm[nr] = val; w83l786ng_write_value(client, W83L786NG_REG_PWM[nr], val); mutex_unlock(&data->update_lock); return count; } static ssize_t store_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); u32 val = simple_strtoul(buf, NULL, 10); u8 reg; if (!val || (val > 2)) /* only modes 1 and 2 are supported */ return -EINVAL; mutex_lock(&data->update_lock); reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); data->pwm_enable[nr] = val; reg &= ~(0x02 << W83L786NG_PWM_ENABLE_SHIFT[nr]); reg |= (val - 1) << W83L786NG_PWM_ENABLE_SHIFT[nr]; w83l786ng_write_value(client, W83L786NG_REG_FAN_CFG, reg); mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute sda_pwm[] = { SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0), SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), }; static struct sensor_device_attribute sda_pwm_mode[] = { SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 0), SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 1), }; static struct sensor_device_attribute sda_pwm_enable[] = { SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 0), SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 1), }; /* For Smart Fan I/Thermal Cruise and Smart Fan II */ static ssize_t show_tolerance(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct w83l786ng_data *data = w83l786ng_update_device(dev); return sprintf(buf, "%ld ", (long)data->tolerance[nr]); } static ssize_t store_tolerance(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); u32 val; u8 tol_tmp, tol_mask; val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); tol_mask = w83l786ng_read_value(client, W83L786NG_REG_TOLERANCE) & ((nr == 1) ? 0x0f : 0xf0); tol_tmp = SENSORS_LIMIT(val, 0, 15); tol_tmp &= 0x0f; data->tolerance[nr] = tol_tmp; if (nr == 1) { tol_tmp <<= 4; } w83l786ng_write_value(client, W83L786NG_REG_TOLERANCE, tol_mask | tol_tmp); mutex_unlock(&data->update_lock); return count; } static struct sensor_device_attribute sda_tolerance[] = { SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, show_tolerance, store_tolerance, 0), SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, show_tolerance, store_tolerance, 1), }; #define IN_UNIT_ATTRS(X) \ &sda_in_input[X].dev_attr.attr, \ &sda_in_min[X].dev_attr.attr, \ &sda_in_max[X].dev_attr.attr #define FAN_UNIT_ATTRS(X) \ &sda_fan_input[X].dev_attr.attr, \ &sda_fan_min[X].dev_attr.attr, \ &sda_fan_div[X].dev_attr.attr #define TEMP_UNIT_ATTRS(X) \ &sda_temp_input[X].dev_attr.attr, \ &sda_temp_max[X].dev_attr.attr, \ &sda_temp_max_hyst[X].dev_attr.attr #define PWM_UNIT_ATTRS(X) \ &sda_pwm[X].dev_attr.attr, \ &sda_pwm_mode[X].dev_attr.attr, \ &sda_pwm_enable[X].dev_attr.attr #define TOLERANCE_UNIT_ATTRS(X) \ &sda_tolerance[X].dev_attr.attr static struct attribute *w83l786ng_attributes[] = { IN_UNIT_ATTRS(0), IN_UNIT_ATTRS(1), IN_UNIT_ATTRS(2), FAN_UNIT_ATTRS(0), FAN_UNIT_ATTRS(1), TEMP_UNIT_ATTRS(0), TEMP_UNIT_ATTRS(1), PWM_UNIT_ATTRS(0), PWM_UNIT_ATTRS(1), TOLERANCE_UNIT_ATTRS(0), TOLERANCE_UNIT_ATTRS(1), NULL }; static const struct attribute_group w83l786ng_group = { .attrs = w83l786ng_attributes, }; static int |
310ec7921
|
591 |
w83l786ng_detect(struct i2c_client *client, struct i2c_board_info *info) |
85f03bccd
|
592 |
{ |
33468e763
|
593 |
struct i2c_adapter *adapter = client->adapter; |
52df6440a
|
594 595 |
u16 man_id; u8 chip_id; |
85f03bccd
|
596 597 |
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
33468e763
|
598 |
return -ENODEV; |
85f03bccd
|
599 |
} |
52df6440a
|
600 601 602 603 604 605 |
/* Detection */ if ((w83l786ng_read_value(client, W83L786NG_REG_CONFIG) & 0x80)) { dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x ", client->addr); return -ENODEV; |
85f03bccd
|
606 |
} |
52df6440a
|
607 608 609 610 611 612 613 614 615 616 617 618 |
/* Identification */ man_id = (w83l786ng_read_value(client, W83L786NG_REG_MAN_ID1) << 8) + w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2); chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID); if (man_id != 0x5CA3 || /* Winbond */ chip_id != 0x80) { /* W83L786NG */ dev_dbg(&adapter->dev, "Unsupported chip (man_id=0x%04X, chip_id=0x%02X) ", man_id, chip_id); return -ENODEV; |
85f03bccd
|
619 |
} |
33468e763
|
620 |
strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE); |
85f03bccd
|
621 |
|
33468e763
|
622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 |
return 0; } static int w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct w83l786ng_data *data; int i, err = 0; u8 reg_tmp; data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL); if (!data) { err = -ENOMEM; goto exit; } i2c_set_clientdata(client, data); mutex_init(&data->update_lock); |
85f03bccd
|
641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 |
/* Initialize the chip */ w83l786ng_init_client(client); /* A few vars need to be filled upon startup */ for (i = 0; i < 2; i++) { data->fan_min[i] = w83l786ng_read_value(client, W83L786NG_REG_FAN_MIN(i)); } /* Update the fan divisor */ reg_tmp = w83l786ng_read_value(client, W83L786NG_REG_FAN_DIV); data->fan_div[0] = reg_tmp & 0x07; data->fan_div[1] = (reg_tmp >> 4) & 0x07; /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &w83l786ng_group))) goto exit_remove; data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove; } return 0; /* Unregister sysfs hooks */ exit_remove: sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); |
85f03bccd
|
672 673 674 675 676 677 |
kfree(data); exit: return err; } static int |
33468e763
|
678 |
w83l786ng_remove(struct i2c_client *client) |
85f03bccd
|
679 680 |
{ struct w83l786ng_data *data = i2c_get_clientdata(client); |
85f03bccd
|
681 682 683 |
hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); |
85f03bccd
|
684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 |
kfree(data); return 0; } static void w83l786ng_init_client(struct i2c_client *client) { u8 tmp; if (reset) w83l786ng_write_value(client, W83L786NG_REG_CONFIG, 0x80); /* Start monitoring */ tmp = w83l786ng_read_value(client, W83L786NG_REG_CONFIG); if (!(tmp & 0x01)) w83l786ng_write_value(client, W83L786NG_REG_CONFIG, tmp | 0x01); } static struct w83l786ng_data *w83l786ng_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct w83l786ng_data *data = i2c_get_clientdata(client); int i, j; u8 reg_tmp, pwmcfg; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { dev_dbg(&client->dev, "Updating w83l786ng data. "); /* Update the voltages measured value and limits */ for (i = 0; i < 3; i++) { data->in[i] = w83l786ng_read_value(client, W83L786NG_REG_IN(i)); data->in_min[i] = w83l786ng_read_value(client, W83L786NG_REG_IN_MIN(i)); data->in_max[i] = w83l786ng_read_value(client, W83L786NG_REG_IN_MAX(i)); } /* Update the fan counts and limits */ for (i = 0; i < 2; i++) { data->fan[i] = w83l786ng_read_value(client, W83L786NG_REG_FAN(i)); data->fan_min[i] = w83l786ng_read_value(client, W83L786NG_REG_FAN_MIN(i)); } /* Update the fan divisor */ reg_tmp = w83l786ng_read_value(client, W83L786NG_REG_FAN_DIV); data->fan_div[0] = reg_tmp & 0x07; data->fan_div[1] = (reg_tmp >> 4) & 0x07; pwmcfg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG); for (i = 0; i < 2; i++) { data->pwm_mode[i] = ((pwmcfg >> W83L786NG_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; data->pwm_enable[i] = ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 2) + 1; data->pwm[i] = w83l786ng_read_value(client, W83L786NG_REG_PWM[i]); } /* Update the temperature sensors */ for (i = 0; i < 2; i++) { for (j = 0; j < 3; j++) { data->temp[i][j] = w83l786ng_read_value(client, W83L786NG_REG_TEMP[i][j]); } } /* Update Smart Fan I/II tolerance */ reg_tmp = w83l786ng_read_value(client, W83L786NG_REG_TOLERANCE); data->tolerance[0] = reg_tmp & 0x0f; data->tolerance[1] = (reg_tmp >> 4) & 0x0f; data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } static int __init sensors_w83l786ng_init(void) { return i2c_add_driver(&w83l786ng_driver); } static void __exit sensors_w83l786ng_exit(void) { i2c_del_driver(&w83l786ng_driver); } MODULE_AUTHOR("Kevin Lo"); MODULE_DESCRIPTION("w83l786ng driver"); MODULE_LICENSE("GPL"); module_init(sensors_w83l786ng_init); module_exit(sensors_w83l786ng_exit); |