Blame view
drivers/gpio/gpio-max732x.c
16.6 KB
bbcd6d543 gpio: max732x driver |
1 |
/* |
c103de240 gpio: reorganize ... |
2 |
* MAX732x I2C Port Expander with 8/16 I/O |
bbcd6d543 gpio: max732x driver |
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 |
* * Copyright (C) 2007 Marvell International Ltd. * Copyright (C) 2008 Jack Ren <jack.ren@marvell.com> * Copyright (C) 2008 Eric Miao <eric.miao@marvell.com> * * Derived from drivers/gpio/pca953x.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. */ #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/gpio.h> |
a80a0bbee gpio: add interru... |
20 21 |
#include <linux/interrupt.h> #include <linux/irq.h> |
bbcd6d543 gpio: max732x driver |
22 23 24 25 26 27 28 29 30 31 32 33 34 |
#include <linux/i2c.h> #include <linux/i2c/max732x.h> /* * Each port of MAX732x (including MAX7319) falls into one of the * following three types: * * - Push Pull Output * - Input * - Open Drain I/O * * designated by 'O', 'I' and 'P' individually according to MAXIM's |
a80a0bbee gpio: add interru... |
35 36 |
* datasheets. 'I' and 'P' ports are interrupt capables, some with * a dedicated interrupt mask. |
bbcd6d543 gpio: max732x driver |
37 38 39 40 41 42 43 44 45 46 47 48 |
* * There are two groups of I/O ports, each group usually includes * up to 8 I/O ports, and is accessed by a specific I2C address: * * - Group A : by I2C address 0b'110xxxx * - Group B : by I2C address 0b'101xxxx * * where 'xxxx' is decided by the connections of pin AD2/AD0. The * address used also affects the initial state of output signals. * * Within each group of ports, there are five known combinations of * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for |
a80a0bbee gpio: add interru... |
49 50 |
* the detailed organization of these ports. Only Goup A is interrupt * capable. |
bbcd6d543 gpio: max732x driver |
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 |
* * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16', * and GPIOs from GROUP_A are numbered before those from GROUP_B * (if there are two groups). * * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so * they are not supported by this driver. */ #define PORT_NONE 0x0 /* '/' No Port */ #define PORT_OUTPUT 0x1 /* 'O' Push-Pull, Output Only */ #define PORT_INPUT 0x2 /* 'I' Input Only */ #define PORT_OPENDRAIN 0x3 /* 'P' Open-Drain, I/O */ #define IO_4I4O 0x5AA5 /* O7 O6 I5 I4 I3 I2 O1 O0 */ #define IO_4P4O 0x5FF5 /* O7 O6 P5 P4 P3 P2 O1 O0 */ #define IO_8I 0xAAAA /* I7 I6 I5 I4 I3 I2 I1 I0 */ #define IO_8P 0xFFFF /* P7 P6 P5 P4 P3 P2 P1 P0 */ #define IO_8O 0x5555 /* O7 O6 O5 O4 O3 O2 O1 O0 */ #define GROUP_A(x) ((x) & 0xffff) /* I2C Addr: 0b'110xxxx */ #define GROUP_B(x) ((x) << 16) /* I2C Addr: 0b'101xxxx */ |
a80a0bbee gpio: add interru... |
73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 |
#define INT_NONE 0x0 /* No interrupt capability */ #define INT_NO_MASK 0x1 /* Has interrupts, no mask */ #define INT_INDEP_MASK 0x2 /* Has interrupts, independent mask */ #define INT_MERGED_MASK 0x3 /* Has interrupts, merged mask */ #define INT_CAPS(x) (((uint64_t)(x)) << 32) enum { MAX7319, MAX7320, MAX7321, MAX7322, MAX7323, MAX7324, MAX7325, MAX7326, MAX7327, }; static uint64_t max732x_features[] = { [MAX7319] = GROUP_A(IO_8I) | INT_CAPS(INT_MERGED_MASK), [MAX7320] = GROUP_B(IO_8O), [MAX7321] = GROUP_A(IO_8P) | INT_CAPS(INT_NO_MASK), [MAX7322] = GROUP_A(IO_4I4O) | INT_CAPS(INT_MERGED_MASK), [MAX7323] = GROUP_A(IO_4P4O) | INT_CAPS(INT_INDEP_MASK), [MAX7324] = GROUP_A(IO_8I) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK), [MAX7325] = GROUP_A(IO_8P) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK), [MAX7326] = GROUP_A(IO_4I4O) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK), [MAX7327] = GROUP_A(IO_4P4O) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK), }; |
bbcd6d543 gpio: max732x driver |
103 |
static const struct i2c_device_id max732x_id[] = { |
a80a0bbee gpio: add interru... |
104 105 106 107 108 109 110 111 112 |
{ "max7319", MAX7319 }, { "max7320", MAX7320 }, { "max7321", MAX7321 }, { "max7322", MAX7322 }, { "max7323", MAX7323 }, { "max7324", MAX7324 }, { "max7325", MAX7325 }, { "max7326", MAX7326 }, { "max7327", MAX7327 }, |
bbcd6d543 gpio: max732x driver |
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 |
{ }, }; MODULE_DEVICE_TABLE(i2c, max732x_id); struct max732x_chip { struct gpio_chip gpio_chip; struct i2c_client *client; /* "main" client */ struct i2c_client *client_dummy; struct i2c_client *client_group_a; struct i2c_client *client_group_b; unsigned int mask_group_a; unsigned int dir_input; unsigned int dir_output; struct mutex lock; uint8_t reg_out[2]; |
a80a0bbee gpio: add interru... |
131 132 133 134 135 136 137 138 139 140 |
#ifdef CONFIG_GPIO_MAX732X_IRQ struct mutex irq_lock; int irq_base; uint8_t irq_mask; uint8_t irq_mask_cur; uint8_t irq_trig_raise; uint8_t irq_trig_fall; uint8_t irq_features; #endif |
bbcd6d543 gpio: max732x driver |
141 |
}; |
a80a0bbee gpio: add interru... |
142 |
static int max732x_writeb(struct max732x_chip *chip, int group_a, uint8_t val) |
bbcd6d543 gpio: max732x driver |
143 144 145 146 147 148 149 150 151 152 153 154 155 156 |
{ struct i2c_client *client; int ret; client = group_a ? chip->client_group_a : chip->client_group_b; ret = i2c_smbus_write_byte(client, val); if (ret < 0) { dev_err(&client->dev, "failed writing "); return ret; } return 0; } |
a80a0bbee gpio: add interru... |
157 |
static int max732x_readb(struct max732x_chip *chip, int group_a, uint8_t *val) |
bbcd6d543 gpio: max732x driver |
158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 |
{ struct i2c_client *client; int ret; client = group_a ? chip->client_group_a : chip->client_group_b; ret = i2c_smbus_read_byte(client); if (ret < 0) { dev_err(&client->dev, "failed reading "); return ret; } *val = (uint8_t)ret; return 0; } static inline int is_group_a(struct max732x_chip *chip, unsigned off) { return (1u << off) & chip->mask_group_a; } static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off) { struct max732x_chip *chip; uint8_t reg_val; int ret; chip = container_of(gc, struct max732x_chip, gpio_chip); |
a80a0bbee gpio: add interru... |
186 |
ret = max732x_readb(chip, is_group_a(chip, off), ®_val); |
bbcd6d543 gpio: max732x driver |
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 |
if (ret < 0) return 0; return reg_val & (1u << (off & 0x7)); } static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) { struct max732x_chip *chip; uint8_t reg_out, mask = 1u << (off & 0x7); int ret; chip = container_of(gc, struct max732x_chip, gpio_chip); mutex_lock(&chip->lock); reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0]; reg_out = (val) ? reg_out | mask : reg_out & ~mask; |
a80a0bbee gpio: add interru... |
205 |
ret = max732x_writeb(chip, is_group_a(chip, off), reg_out); |
bbcd6d543 gpio: max732x driver |
206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 |
if (ret < 0) goto out; /* update the shadow register then */ if (off > 7) chip->reg_out[1] = reg_out; else chip->reg_out[0] = reg_out; out: mutex_unlock(&chip->lock); } static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off) { struct max732x_chip *chip; unsigned int mask = 1u << off; chip = container_of(gc, struct max732x_chip, gpio_chip); if ((mask & chip->dir_input) == 0) { dev_dbg(&chip->client->dev, "%s port %d is output only ", chip->client->name, off); return -EACCES; } |
a13c1868a gpio: max732x: fi... |
231 232 233 234 235 236 |
/* * Open-drain pins must be set to high impedance (which is * equivalent to output-high) to be turned into an input. */ if ((mask & chip->dir_output)) max732x_gpio_set_value(gc, off, 1); |
bbcd6d543 gpio: max732x driver |
237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 |
return 0; } static int max732x_gpio_direction_output(struct gpio_chip *gc, unsigned off, int val) { struct max732x_chip *chip; unsigned int mask = 1u << off; chip = container_of(gc, struct max732x_chip, gpio_chip); if ((mask & chip->dir_output) == 0) { dev_dbg(&chip->client->dev, "%s port %d is input only ", chip->client->name, off); return -EACCES; } max732x_gpio_set_value(gc, off, val); return 0; } |
a80a0bbee gpio: add interru... |
258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 |
#ifdef CONFIG_GPIO_MAX732X_IRQ static int max732x_writew(struct max732x_chip *chip, uint16_t val) { int ret; val = cpu_to_le16(val); ret = i2c_master_send(chip->client_group_a, (char *)&val, 2); if (ret < 0) { dev_err(&chip->client_group_a->dev, "failed writing "); return ret; } return 0; } static int max732x_readw(struct max732x_chip *chip, uint16_t *val) { int ret; ret = i2c_master_recv(chip->client_group_a, (char *)val, 2); if (ret < 0) { dev_err(&chip->client_group_a->dev, "failed reading "); return ret; } *val = le16_to_cpu(*val); return 0; } static void max732x_irq_update_mask(struct max732x_chip *chip) { uint16_t msg; if (chip->irq_mask == chip->irq_mask_cur) return; chip->irq_mask = chip->irq_mask_cur; if (chip->irq_features == INT_NO_MASK) return; mutex_lock(&chip->lock); switch (chip->irq_features) { case INT_INDEP_MASK: msg = (chip->irq_mask << 8) | chip->reg_out[0]; max732x_writew(chip, msg); break; case INT_MERGED_MASK: msg = chip->irq_mask | chip->reg_out[0]; max732x_writeb(chip, 1, (uint8_t)msg); break; } mutex_unlock(&chip->lock); } static int max732x_gpio_to_irq(struct gpio_chip *gc, unsigned off) { struct max732x_chip *chip; chip = container_of(gc, struct max732x_chip, gpio_chip); return chip->irq_base + off; } |
fbc4667ab gpio: max732x: ir... |
326 |
static void max732x_irq_mask(struct irq_data *d) |
a80a0bbee gpio: add interru... |
327 |
{ |
fbc4667ab gpio: max732x: ir... |
328 |
struct max732x_chip *chip = irq_data_get_irq_chip_data(d); |
a80a0bbee gpio: add interru... |
329 |
|
fbc4667ab gpio: max732x: ir... |
330 |
chip->irq_mask_cur &= ~(1 << (d->irq - chip->irq_base)); |
a80a0bbee gpio: add interru... |
331 |
} |
fbc4667ab gpio: max732x: ir... |
332 |
static void max732x_irq_unmask(struct irq_data *d) |
a80a0bbee gpio: add interru... |
333 |
{ |
fbc4667ab gpio: max732x: ir... |
334 |
struct max732x_chip *chip = irq_data_get_irq_chip_data(d); |
a80a0bbee gpio: add interru... |
335 |
|
fbc4667ab gpio: max732x: ir... |
336 |
chip->irq_mask_cur |= 1 << (d->irq - chip->irq_base); |
a80a0bbee gpio: add interru... |
337 |
} |
fbc4667ab gpio: max732x: ir... |
338 |
static void max732x_irq_bus_lock(struct irq_data *d) |
a80a0bbee gpio: add interru... |
339 |
{ |
fbc4667ab gpio: max732x: ir... |
340 |
struct max732x_chip *chip = irq_data_get_irq_chip_data(d); |
a80a0bbee gpio: add interru... |
341 342 343 344 |
mutex_lock(&chip->irq_lock); chip->irq_mask_cur = chip->irq_mask; } |
fbc4667ab gpio: max732x: ir... |
345 |
static void max732x_irq_bus_sync_unlock(struct irq_data *d) |
a80a0bbee gpio: add interru... |
346 |
{ |
fbc4667ab gpio: max732x: ir... |
347 |
struct max732x_chip *chip = irq_data_get_irq_chip_data(d); |
a80a0bbee gpio: add interru... |
348 349 350 351 |
max732x_irq_update_mask(chip); mutex_unlock(&chip->irq_lock); } |
fbc4667ab gpio: max732x: ir... |
352 |
static int max732x_irq_set_type(struct irq_data *d, unsigned int type) |
a80a0bbee gpio: add interru... |
353 |
{ |
fbc4667ab gpio: max732x: ir... |
354 355 |
struct max732x_chip *chip = irq_data_get_irq_chip_data(d); uint16_t off = d->irq - chip->irq_base; |
a80a0bbee gpio: add interru... |
356 357 358 359 360 361 362 363 364 365 366 367 |
uint16_t mask = 1 << off; if (!(mask & chip->dir_input)) { dev_dbg(&chip->client->dev, "%s port %d is output only ", chip->client->name, off); return -EACCES; } if (!(type & IRQ_TYPE_EDGE_BOTH)) { dev_err(&chip->client->dev, "irq %d: unsupported type %d ", |
fbc4667ab gpio: max732x: ir... |
368 |
d->irq, type); |
a80a0bbee gpio: add interru... |
369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 |
return -EINVAL; } if (type & IRQ_TYPE_EDGE_FALLING) chip->irq_trig_fall |= mask; else chip->irq_trig_fall &= ~mask; if (type & IRQ_TYPE_EDGE_RISING) chip->irq_trig_raise |= mask; else chip->irq_trig_raise &= ~mask; return max732x_gpio_direction_input(&chip->gpio_chip, off); } static struct irq_chip max732x_irq_chip = { .name = "max732x", |
fbc4667ab gpio: max732x: ir... |
387 388 389 390 391 |
.irq_mask = max732x_irq_mask, .irq_unmask = max732x_irq_unmask, .irq_bus_lock = max732x_irq_bus_lock, .irq_bus_sync_unlock = max732x_irq_bus_sync_unlock, .irq_set_type = max732x_irq_set_type, |
a80a0bbee gpio: add interru... |
392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 |
}; static uint8_t max732x_irq_pending(struct max732x_chip *chip) { uint8_t cur_stat; uint8_t old_stat; uint8_t trigger; uint8_t pending; uint16_t status; int ret; ret = max732x_readw(chip, &status); if (ret) return 0; trigger = status >> 8; trigger &= chip->irq_mask; if (!trigger) return 0; cur_stat = status & 0xFF; cur_stat &= chip->irq_mask; old_stat = cur_stat ^ trigger; pending = (old_stat & chip->irq_trig_fall) | (cur_stat & chip->irq_trig_raise); pending &= trigger; return pending; } static irqreturn_t max732x_irq_handler(int irq, void *devid) { struct max732x_chip *chip = devid; uint8_t pending; uint8_t level; pending = max732x_irq_pending(chip); if (!pending) return IRQ_HANDLED; do { level = __ffs(pending); handle_nested_irq(level + chip->irq_base); pending &= ~(1 << level); } while (pending); return IRQ_HANDLED; } static int max732x_irq_setup(struct max732x_chip *chip, const struct i2c_device_id *id) { struct i2c_client *client = chip->client; |
e56aee189 gpio: use dev_get... |
450 |
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev); |
a80a0bbee gpio: add interru... |
451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 |
int has_irq = max732x_features[id->driver_data] >> 32; int ret; if (pdata->irq_base && has_irq != INT_NONE) { int lvl; chip->irq_base = pdata->irq_base; chip->irq_features = has_irq; mutex_init(&chip->irq_lock); for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) { int irq = lvl + chip->irq_base; if (!(chip->dir_input & (1 << lvl))) continue; |
b51804bcf gpio: Cleanup gen... |
466 467 |
irq_set_chip_data(irq, chip); irq_set_chip_and_handler(irq, &max732x_irq_chip, |
a80a0bbee gpio: add interru... |
468 |
handle_edge_irq); |
b51804bcf gpio: Cleanup gen... |
469 |
irq_set_nested_thread(irq, 1); |
a80a0bbee gpio: add interru... |
470 471 472 |
#ifdef CONFIG_ARM set_irq_flags(irq, IRQF_VALID); #else |
b51804bcf gpio: Cleanup gen... |
473 |
irq_set_noprobe(irq); |
a80a0bbee gpio: add interru... |
474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 |
#endif } ret = request_threaded_irq(client->irq, NULL, max732x_irq_handler, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, dev_name(&client->dev), chip); if (ret) { dev_err(&client->dev, "failed to request irq %d ", client->irq); goto out_failed; } chip->gpio_chip.to_irq = max732x_gpio_to_irq; } return 0; out_failed: chip->irq_base = 0; return ret; } static void max732x_irq_teardown(struct max732x_chip *chip) { if (chip->irq_base) free_irq(chip->client->irq, chip); } #else /* CONFIG_GPIO_MAX732X_IRQ */ static int max732x_irq_setup(struct max732x_chip *chip, const struct i2c_device_id *id) { struct i2c_client *client = chip->client; |
e56aee189 gpio: use dev_get... |
509 |
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev); |
a80a0bbee gpio: add interru... |
510 511 512 513 514 515 516 517 518 519 520 521 522 |
int has_irq = max732x_features[id->driver_data] >> 32; if (pdata->irq_base && has_irq != INT_NONE) dev_warn(&client->dev, "interrupt support not compiled in "); return 0; } static void max732x_irq_teardown(struct max732x_chip *chip) { } #endif |
3836309d9 gpio: remove use ... |
523 |
static int max732x_setup_gpio(struct max732x_chip *chip, |
bbcd6d543 gpio: max732x driver |
524 525 526 527 |
const struct i2c_device_id *id, unsigned gpio_start) { struct gpio_chip *gc = &chip->gpio_chip; |
a80a0bbee gpio: add interru... |
528 |
uint32_t id_data = (uint32_t)max732x_features[id->driver_data]; |
bbcd6d543 gpio: max732x driver |
529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 |
int i, port = 0; for (i = 0; i < 16; i++, id_data >>= 2) { unsigned int mask = 1 << port; switch (id_data & 0x3) { case PORT_OUTPUT: chip->dir_output |= mask; break; case PORT_INPUT: chip->dir_input |= mask; break; case PORT_OPENDRAIN: chip->dir_output |= mask; chip->dir_input |= mask; break; default: continue; } if (i < 8) chip->mask_group_a |= mask; port++; } if (chip->dir_input) gc->direction_input = max732x_gpio_direction_input; if (chip->dir_output) { gc->direction_output = max732x_gpio_direction_output; gc->set = max732x_gpio_set_value; } gc->get = max732x_gpio_get_value; |
9fb1f39eb gpio/pinctrl: mak... |
561 |
gc->can_sleep = true; |
bbcd6d543 gpio: max732x driver |
562 563 564 565 566 567 568 569 |
gc->base = gpio_start; gc->ngpio = port; gc->label = chip->client->name; gc->owner = THIS_MODULE; return port; } |
3836309d9 gpio: remove use ... |
570 |
static int max732x_probe(struct i2c_client *client, |
bbcd6d543 gpio: max732x driver |
571 572 573 574 575 576 577 |
const struct i2c_device_id *id) { struct max732x_platform_data *pdata; struct max732x_chip *chip; struct i2c_client *c; uint16_t addr_a, addr_b; int ret, nr_port; |
e56aee189 gpio: use dev_get... |
578 |
pdata = dev_get_platdata(&client->dev); |
a342d215c gpio: fix probe()... |
579 580 581 582 583 |
if (pdata == NULL) { dev_dbg(&client->dev, "no platform data "); return -EINVAL; } |
bbcd6d543 gpio: max732x driver |
584 |
|
b09638a4d gpio: max732x: us... |
585 586 |
chip = devm_kzalloc(&client->dev, sizeof(struct max732x_chip), GFP_KERNEL); |
bbcd6d543 gpio: max732x driver |
587 588 589 590 591 592 593 594 595 596 597 598 |
if (chip == NULL) return -ENOMEM; chip->client = client; nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base); addr_a = (client->addr & 0x0f) | 0x60; addr_b = (client->addr & 0x0f) | 0x50; switch (client->addr & 0x70) { case 0x60: chip->client_group_a = client; |
5535cb681 max732x: correct ... |
599 |
if (nr_port > 8) { |
bbcd6d543 gpio: max732x driver |
600 601 602 603 604 605 |
c = i2c_new_dummy(client->adapter, addr_b); chip->client_group_b = chip->client_dummy = c; } break; case 0x50: chip->client_group_b = client; |
5535cb681 max732x: correct ... |
606 |
if (nr_port > 8) { |
bbcd6d543 gpio: max732x driver |
607 608 609 610 611 612 613 614 615 616 |
c = i2c_new_dummy(client->adapter, addr_a); chip->client_group_a = chip->client_dummy = c; } break; default: dev_err(&client->dev, "invalid I2C address specified %02x ", client->addr); ret = -EINVAL; goto out_failed; |
f561b4230 gpio: max732x: Fi... |
617 618 619 620 621 622 623 624 |
} if (nr_port > 8 && !chip->client_dummy) { dev_err(&client->dev, "Failed to allocate second group I2C device "); ret = -ENODEV; goto out_failed; |
bbcd6d543 gpio: max732x driver |
625 626 627 |
} mutex_init(&chip->lock); |
a80a0bbee gpio: add interru... |
628 |
max732x_readb(chip, is_group_a(chip, 0), &chip->reg_out[0]); |
5535cb681 max732x: correct ... |
629 |
if (nr_port > 8) |
a80a0bbee gpio: add interru... |
630 631 632 633 634 |
max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]); ret = max732x_irq_setup(chip, id); if (ret) goto out_failed; |
bbcd6d543 gpio: max732x driver |
635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 |
ret = gpiochip_add(&chip->gpio_chip); if (ret) goto out_failed; if (pdata->setup) { ret = pdata->setup(client, chip->gpio_chip.base, chip->gpio_chip.ngpio, pdata->context); if (ret < 0) dev_warn(&client->dev, "setup failed, %d ", ret); } i2c_set_clientdata(client, chip); return 0; out_failed: |
c75793d8a gpio: max732x: Fi... |
652 653 |
if (chip->client_dummy) i2c_unregister_device(chip->client_dummy); |
a80a0bbee gpio: add interru... |
654 |
max732x_irq_teardown(chip); |
bbcd6d543 gpio: max732x driver |
655 656 |
return ret; } |
206210ce6 gpio: remove use ... |
657 |
static int max732x_remove(struct i2c_client *client) |
bbcd6d543 gpio: max732x driver |
658 |
{ |
e56aee189 gpio: use dev_get... |
659 |
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev); |
bbcd6d543 gpio: max732x driver |
660 661 662 663 664 665 666 667 668 669 670 671 672 |
struct max732x_chip *chip = i2c_get_clientdata(client); int ret; if (pdata->teardown) { ret = pdata->teardown(client, chip->gpio_chip.base, chip->gpio_chip.ngpio, pdata->context); if (ret < 0) { dev_err(&client->dev, "%s failed, %d ", "teardown", ret); return ret; } } |
9f5132ae8 gpio: remove all ... |
673 |
gpiochip_remove(&chip->gpio_chip); |
bbcd6d543 gpio: max732x driver |
674 |
|
a80a0bbee gpio: add interru... |
675 |
max732x_irq_teardown(chip); |
bbcd6d543 gpio: max732x driver |
676 677 678 |
/* unregister any dummy i2c_client */ if (chip->client_dummy) i2c_unregister_device(chip->client_dummy); |
bbcd6d543 gpio: max732x driver |
679 680 681 682 683 684 685 686 687 |
return 0; } static struct i2c_driver max732x_driver = { .driver = { .name = "max732x", .owner = THIS_MODULE, }, .probe = max732x_probe, |
8283c4ff5 gpio: remove use ... |
688 |
.remove = max732x_remove, |
bbcd6d543 gpio: max732x driver |
689 690 691 692 693 694 695 |
.id_table = max732x_id, }; static int __init max732x_init(void) { return i2c_add_driver(&max732x_driver); } |
2f8d11971 gpio: i2c expande... |
696 697 698 699 |
/* register after i2c postcore initcall and before * subsys initcalls that may rely on these GPIOs */ subsys_initcall(max732x_init); |
bbcd6d543 gpio: max732x driver |
700 701 702 703 704 705 706 707 708 709 |
static void __exit max732x_exit(void) { i2c_del_driver(&max732x_driver); } module_exit(max732x_exit); MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); MODULE_DESCRIPTION("GPIO expander driver for MAX732X"); MODULE_LICENSE("GPL"); |