/*
   * RapidIO interconnect services
   * (RapidIO Interconnect Specification, http://www.rapidio.org)
   *
   * Copyright 2005 MontaVista Software, Inc.
   * Matt Porter <mporter@kernel.crashing.org>
   *
   * This program is free software; you can redistribute  it and/or modify it
   * under  the terms of  the GNU General  Public License as published by the
   * Free Software Foundation;  either version 2 of the  License, or (at your
   * option) any later version.
   */
  
  #ifndef LINUX_RIO_H
  #define LINUX_RIO_H

  #include <linux/types.h>

  #include <linux/ioport.h>
  #include <linux/list.h>
  #include <linux/errno.h>
  #include <linux/device.h>
  #include <linux/rio_regs.h>

  #include <linux/mod_devicetable.h>

  #ifdef CONFIG_RAPIDIO_DMA_ENGINE
  #include <linux/dmaengine.h>
  #endif

  #define RIO_NO_HOPCOUNT		-1

  #define RIO_INVALID_DESTID	0xffff

  #define RIO_MAX_MPORTS		8

  #define RIO_MAX_MPORT_RESOURCES	16
  #define RIO_MAX_DEV_RESOURCES	16

  #define RIO_MAX_MPORT_NAME	40

  
  #define RIO_GLOBAL_TABLE	0xff	/* Indicates access of a switch's
  					   global routing table if it
  					   has multiple (or per port)
  					   tables */
  
  #define RIO_INVALID_ROUTE	0xff	/* Indicates that a route table
  					   entry is invalid (no route
  					   exists for the device ID) */

  #define RIO_MAX_ROUTE_ENTRIES(size)	(size ? (1 << 16) : (1 << 8))
  #define RIO_ANY_DESTID(size)		(size ? 0xffff : 0xff)

  
  #define RIO_MAX_MBOX		4
  #define RIO_MAX_MSG_SIZE	0x1000
  
  /*
   * Error values that may be returned by RIO functions.
   */
  #define RIO_SUCCESSFUL			0x00
  #define RIO_BAD_SIZE			0x81
  
  /*
   * For RIO devices, the region numbers are assigned this way:
   *
   *	0	RapidIO outbound doorbells
   *      1-15	RapidIO memory regions
   *
   * For RIO master ports, the region number are assigned this way:
   *
   *	0	RapidIO inbound doorbells
   *	1	RapidIO inbound mailboxes

   *	2	RapidIO outbound mailboxes

   */
  #define RIO_DOORBELL_RESOURCE	0
  #define RIO_INB_MBOX_RESOURCE	1
  #define RIO_OUTB_MBOX_RESOURCE	2

  #define RIO_PW_MSG_SIZE		64

  /*
   * A component tag value (stored in the component tag CSR) is used as device's
   * unique identifier assigned during enumeration. Besides being used for
   * identifying switches (which do not have device ID register), it also is used
   * by error management notification and therefore has to be assigned
   * to endpoints as well.
   */
  #define RIO_CTAG_RESRVD	0xfffe0000 /* Reserved */
  #define RIO_CTAG_UDEVID	0x0001ffff /* Unique device identifier */

  extern struct bus_type rio_bus_type;

  extern struct class rio_mport_class;

  
  struct rio_mport;

  struct rio_dev;

  union rio_pw_msg;

  
  /**

   * struct rio_switch - RIO switch info
   * @node: Node in global list of switches

   * @route_table: Copy of switch routing table
   * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0

   * @ops: pointer to switch-specific operations
   * @lock: lock to serialize operations updates
   * @nextdev: Array of per-port pointers to the next attached device
   */
  struct rio_switch {
  	struct list_head node;

  	u8 *route_table;
  	u32 port_ok;
  	struct rio_switch_ops *ops;
  	spinlock_t lock;
  	struct rio_dev *nextdev[0];
  };
  
  /**
   * struct rio_switch_ops - Per-switch operations
   * @owner: The module owner of this structure

   * @add_entry: Callback for switch-specific route add function
   * @get_entry: Callback for switch-specific route get function
   * @clr_table: Callback for switch-specific clear route table function
   * @set_domain: Callback for switch-specific domain setting function
   * @get_domain: Callback for switch-specific domain get function
   * @em_init: Callback for switch-specific error management init function
   * @em_handle: Callback for switch-specific error management handler function

   *
   * Defines the operations that are necessary to initialize/control
   * a particular RIO switch device.

   */

  struct rio_switch_ops {
  	struct module *owner;

  	int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
  			  u16 table, u16 route_destid, u8 route_port);
  	int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
  			  u16 table, u16 route_destid, u8 *route_port);
  	int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
  			  u16 table);
  	int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
  			   u8 sw_domain);
  	int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
  			   u8 *sw_domain);
  	int (*em_init) (struct rio_dev *dev);
  	int (*em_handle) (struct rio_dev *dev, u8 swport);

  };
  
  /**

   * struct rio_dev - RIO device info
   * @global_list: Node in list of all RIO devices
   * @net_list: Node in list of RIO devices in a network
   * @net: Network this device is a part of

   * @do_enum: Enumeration flag

   * @did: Device ID
   * @vid: Vendor ID
   * @device_rev: Device revision
   * @asm_did: Assembly device ID
   * @asm_vid: Assembly vendor ID
   * @asm_rev: Assembly revision
   * @efptr: Extended feature pointer
   * @pef: Processing element features
   * @swpinfo: Switch port info
   * @src_ops: Source operation capabilities
   * @dst_ops: Destination operation capabilities

   * @comp_tag: RIO component tag
   * @phys_efptr: RIO device extended features pointer
   * @em_efptr: RIO Error Management features pointer

   * @dma_mask: Mask of bits of RIO address this device implements

   * @driver: Driver claiming this device
   * @dev: Device model device
   * @riores: RIO resources this device owns

   * @pwcback: port-write callback function for this device

   * @destid: Network destination ID (or associated destid for switch)
   * @hopcount: Hopcount to this device

   * @prev: Previous RIO device connected to the current one

   * @rswitch: struct rio_switch (if valid for this device)

   */
  struct rio_dev {
  	struct list_head global_list;	/* node in list of all RIO devices */
  	struct list_head net_list;	/* node in per net list */
  	struct rio_net *net;	/* RIO net this device resides in */

  	bool do_enum;

  	u16 did;
  	u16 vid;
  	u32 device_rev;
  	u16 asm_did;
  	u16 asm_vid;
  	u16 asm_rev;
  	u16 efptr;
  	u32 pef;

  	u32 swpinfo;

  	u32 src_ops;
  	u32 dst_ops;

  	u32 comp_tag;
  	u32 phys_efptr;
  	u32 em_efptr;

  	u64 dma_mask;

  	struct rio_driver *driver;	/* RIO driver claiming this device */
  	struct device dev;	/* LDM device structure */
  	struct resource riores[RIO_MAX_DEV_RESOURCES];

  	int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step);

  	u16 destid;

  	u8 hopcount;

  	struct rio_dev *prev;

  	struct rio_switch rswitch[0];	/* RIO switch info */

  };
  
  #define rio_dev_g(n) list_entry(n, struct rio_dev, global_list)
  #define rio_dev_f(n) list_entry(n, struct rio_dev, net_list)
  #define	to_rio_dev(n) container_of(n, struct rio_dev, dev)

  #define sw_to_rio_dev(n) container_of(n, struct rio_dev, rswitch[0])

  #define	to_rio_mport(n) container_of(n, struct rio_mport, dev)

  
  /**
   * struct rio_msg - RIO message event
   * @res: Mailbox resource
   * @mcback: Message event callback
   */
  struct rio_msg {
  	struct resource *res;

  	void (*mcback) (struct rio_mport * mport, void *dev_id, int mbox, int slot);

  };
  
  /**
   * struct rio_dbell - RIO doorbell event
   * @node: Node in list of doorbell events
   * @res: Doorbell resource
   * @dinb: Doorbell event callback

   * @dev_id: Device specific pointer to pass on event

   */
  struct rio_dbell {
  	struct list_head node;
  	struct resource *res;

  	void (*dinb) (struct rio_mport *mport, void *dev_id, u16 src, u16 dst, u16 info);
  	void *dev_id;

  };

  enum rio_phy_type {
  	RIO_PHY_PARALLEL,
  	RIO_PHY_SERIAL,
  };

  /**
   * struct rio_mport - RIO master port info
   * @dbells: List of doorbell events
   * @node: Node in global list of master ports
   * @nnode: Node in network list of master ports
   * @iores: I/O mem resource that this master port interface owns
   * @riores: RIO resources that this master port interfaces owns
   * @inb_msg: RIO inbound message event descriptors
   * @outb_msg: RIO outbound message event descriptors
   * @host_deviceid: Host device ID associated with this master port
   * @ops: configuration space functions
   * @id: Port ID, unique among all ports
   * @index: Port index, unique among all port interfaces of the same type

   * @sys_size: RapidIO common transport system size
   * @phy_type: RapidIO phy type

   * @phys_efptr: RIO port extended features pointer

   * @name: Port name string

   * @dev: device structure associated with an mport

   * @priv: Master port private data

   * @dma: DMA device associated with mport

   * @nscan: RapidIO network enumeration/discovery operations

   */
  struct rio_mport {
  	struct list_head dbells;	/* list of doorbell events */
  	struct list_head node;	/* node in global list of ports */
  	struct list_head nnode;	/* node in net list of ports */
  	struct resource iores;
  	struct resource riores[RIO_MAX_MPORT_RESOURCES];
  	struct rio_msg inb_msg[RIO_MAX_MBOX];
  	struct rio_msg outb_msg[RIO_MAX_MBOX];
  	int host_deviceid;	/* Host device ID */

  	struct rio_ops *ops;	/* low-level architecture-dependent routines */

  	unsigned char id;	/* port ID, unique among all ports */
  	unsigned char index;	/* port index, unique among all port
  				   interfaces of the same type */

  	unsigned int sys_size;	/* RapidIO common transport system size.
  				 * 0 - Small size. 256 devices.
  				 * 1 - Large size, 65536 devices.
  				 */

  	enum rio_phy_type phy_type;	/* RapidIO phy type */

  	u32 phys_efptr;

  	unsigned char name[RIO_MAX_MPORT_NAME];

  	struct device dev;

  	void *priv;		/* Master port private data */

  #ifdef CONFIG_RAPIDIO_DMA_ENGINE
  	struct dma_device	dma;
  #endif

  	struct rio_scan *nscan;

  };

  /*
   * Enumeration/discovery control flags
   */
  #define RIO_SCAN_ENUM_NO_WAIT	0x00000001 /* Do not wait for enum completed */

  struct rio_id_table {
  	u16 start;	/* logical minimal id */

  	u32 max;	/* max number of IDs in table */
  	spinlock_t lock;
  	unsigned long *table;
  };

  /**
   * struct rio_net - RIO network info
   * @node: Node in global list of RIO networks
   * @devices: List of devices in this network

   * @switches: List of switches in this netowrk

   * @mports: List of master ports accessing this network
   * @hport: Default port for accessing this network
   * @id: RIO network ID

   * @destid_table: destID allocation table

   */
  struct rio_net {
  	struct list_head node;	/* node in list of networks */
  	struct list_head devices;	/* list of devices in this net */

  	struct list_head switches;	/* list of switches in this net */

  	struct list_head mports;	/* list of ports accessing net */
  	struct rio_mport *hport;	/* primary port for accessing net */
  	unsigned char id;	/* RIO network ID */

  	struct rio_id_table destid_table;  /* destID allocation table */

  };

  /* Low-level architecture-dependent routines */
  
  /**
   * struct rio_ops - Low-level RIO configuration space operations
   * @lcread: Callback to perform local (master port) read of config space.
   * @lcwrite: Callback to perform local (master port) write of config space.
   * @cread: Callback to perform network read of config space.
   * @cwrite: Callback to perform network write of config space.
   * @dsend: Callback to send a doorbell message.

   * @pwenable: Callback to enable/disable port-write message handling.

   * @open_outb_mbox: Callback to initialize outbound mailbox.
   * @close_outb_mbox: Callback to shut down outbound mailbox.
   * @open_inb_mbox: Callback to initialize inbound mailbox.
   * @close_inb_mbox: Callback to	shut down inbound mailbox.
   * @add_outb_message: Callback to add a message to an outbound mailbox queue.
   * @add_inb_buffer: Callback to	add a buffer to an inbound mailbox queue.
   * @get_inb_message: Callback to get a message from an inbound mailbox queue.

   * @map_inb: Callback to map RapidIO address region into local memory space.
   * @unmap_inb: Callback to unmap RapidIO address region mapped with map_inb().

   */
  struct rio_ops {

  	int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
  			u32 *data);
  	int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len,
  			u32 data);
  	int (*cread) (struct rio_mport *mport, int index, u16 destid,
  			u8 hopcount, u32 offset, int len, u32 *data);
  	int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
  			u8 hopcount, u32 offset, int len, u32 data);
  	int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);

  	int (*pwenable) (struct rio_mport *mport, int enable);

  	int (*open_outb_mbox)(struct rio_mport *mport, void *dev_id,
  			      int mbox, int entries);
  	void (*close_outb_mbox)(struct rio_mport *mport, int mbox);
  	int  (*open_inb_mbox)(struct rio_mport *mport, void *dev_id,
  			     int mbox, int entries);
  	void (*close_inb_mbox)(struct rio_mport *mport, int mbox);
  	int  (*add_outb_message)(struct rio_mport *mport, struct rio_dev *rdev,
  				 int mbox, void *buffer, size_t len);
  	int (*add_inb_buffer)(struct rio_mport *mport, int mbox, void *buf);
  	void *(*get_inb_message)(struct rio_mport *mport, int mbox);

  	int (*map_inb)(struct rio_mport *mport, dma_addr_t lstart,
  			u64 rstart, u32 size, u32 flags);
  	void (*unmap_inb)(struct rio_mport *mport, dma_addr_t lstart);

  };
  
  #define RIO_RESOURCE_MEM	0x00000100
  #define RIO_RESOURCE_DOORBELL	0x00000200
  #define RIO_RESOURCE_MAILBOX	0x00000400
  
  #define RIO_RESOURCE_CACHEABLE	0x00010000
  #define RIO_RESOURCE_PCI	0x00020000
  
  #define RIO_RESOURCE_BUSY	0x80000000
  
  /**
   * struct rio_driver - RIO driver info
   * @node: Node in list of drivers
   * @name: RIO driver name
   * @id_table: RIO device ids to be associated with this driver
   * @probe: RIO device inserted
   * @remove: RIO device removed
   * @suspend: RIO device suspended
   * @resume: RIO device awakened
   * @enable_wake: RIO device enable wake event
   * @driver: LDM driver struct
   *
   * Provides info on a RIO device driver for insertion/removal and
   * power management purposes.
   */
  struct rio_driver {
  	struct list_head node;
  	char *name;
  	const struct rio_device_id *id_table;
  	int (*probe) (struct rio_dev * dev, const struct rio_device_id * id);
  	void (*remove) (struct rio_dev * dev);
  	int (*suspend) (struct rio_dev * dev, u32 state);
  	int (*resume) (struct rio_dev * dev);
  	int (*enable_wake) (struct rio_dev * dev, u32 state, int enable);
  	struct device_driver driver;
  };
  
  #define	to_rio_driver(drv) container_of(drv,struct rio_driver, driver)

  union rio_pw_msg {
  	struct {
  		u32 comptag;	/* Component Tag CSR */
  		u32 errdetect;	/* Port N Error Detect CSR */
  		u32 is_port;	/* Implementation specific + PortID */
  		u32 ltlerrdet;	/* LTL Error Detect CSR */
  		u32 padding[12];
  	} em;
  	u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
  };

  #ifdef CONFIG_RAPIDIO_DMA_ENGINE

  /*

   * enum rio_write_type - RIO write transaction types used in DMA transfers
   *
   * Note: RapidIO specification defines write (NWRITE) and
   * write-with-response (NWRITE_R) data transfer operations.
   * Existing DMA controllers that service RapidIO may use one of these operations
   * for entire data transfer or their combination with only the last data packet
   * requires response.
   */
  enum rio_write_type {
  	RDW_DEFAULT,		/* default method used by DMA driver */
  	RDW_ALL_NWRITE,		/* all packets use NWRITE */
  	RDW_ALL_NWRITE_R,	/* all packets use NWRITE_R */
  	RDW_LAST_NWRITE_R,	/* last packet uses NWRITE_R, others - NWRITE */
  };
  
  struct rio_dma_ext {
  	u16 destid;
  	u64 rio_addr;	/* low 64-bits of 66-bit RapidIO address */
  	u8  rio_addr_u;  /* upper 2-bits of 66-bit RapidIO address */
  	enum rio_write_type wr_type; /* preferred RIO write operation type */
  };
  
  struct rio_dma_data {
  	/* Local data (as scatterlist) */
  	struct scatterlist	*sg;	/* I/O scatter list */
  	unsigned int		sg_len;	/* size of scatter list */
  	/* Remote device address (flat buffer) */
  	u64 rio_addr;	/* low 64-bits of 66-bit RapidIO address */
  	u8  rio_addr_u;  /* upper 2-bits of 66-bit RapidIO address */
  	enum rio_write_type wr_type; /* preferred RIO write operation type */
  };
  
  static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
  {
  	return container_of(ddev, struct rio_mport, dma);
  }
  #endif /* CONFIG_RAPIDIO_DMA_ENGINE */

  /**
   * struct rio_scan - RIO enumeration and discovery operations

   * @owner: The module owner of this structure

   * @enumerate: Callback to perform RapidIO fabric enumeration.
   * @discover: Callback to perform RapidIO fabric discovery.
   */
  struct rio_scan {

  	struct module *owner;

  	int (*enumerate)(struct rio_mport *mport, u32 flags);
  	int (*discover)(struct rio_mport *mport, u32 flags);

  };

  /**
   * struct rio_scan_node - list node to register RapidIO enumeration and
   * discovery methods with RapidIO core.
   * @mport_id: ID of an mport (net) serviced by this enumerator
   * @node: node in global list of registered enumerators
   * @ops: RIO enumeration and discovery operations
   */
  struct rio_scan_node {
  	int mport_id;
  	struct list_head node;
  	struct rio_scan *ops;
  };

  /* Architecture and hardware-specific functions */

  extern int rio_register_mport(struct rio_mport *);

  extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);

  extern void rio_close_inb_mbox(struct rio_mport *, int);

  extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int);

  extern void rio_close_outb_mbox(struct rio_mport *, int);

  #endif				/* LINUX_RIO_H */