16 Aug, 2012
1 commit
-
Rename all USB drivers with their own directory under
drivers/media/video into drivers/media/usb and update the
building system.Signed-off-by: Mauro Carvalho Chehab
15 Aug, 2012
1 commit
-
Fix a one-character typo at the makefile.
drivers/built-in.o: In function `flexcop_pci_remove':
flexcop-pci.c:(.text+0x20d1a28): undefined reference to `flexcop_dma_free'
flexcop-pci.c:(.text+0x20d1a3e): undefined reference to `flexcop_dma_free'
drivers/built-in.o: In function `flexcop_pci_stream_control':
flexcop-pci.c:(.text+0x20d2396): undefined reference to `flexcop_dma_config'
flexcop-pci.c:(.text+0x20d23b3): undefined reference to `flexcop_dma_config'
flexcop-pci.c:(.text+0x20d23cf): undefined reference to `flexcop_dma_config_timer'
flexcop-pci.c:(.text+0x20d23f5): undefined reference to `flexcop_dma_xfer_control'
flexcop-pci.c:(.text+0x20d244c): undefined reference to `flexcop_dma_control_timer_irq'
flexcop-pci.c:(.text+0x20d24b0): undefined reference to `flexcop_dma_control_timer_irq'
flexcop-pci.c:(.text+0x20d2507): undefined reference to `flexcop_dma_xfer_control'
drivers/built-in.o: In function `flexcop_pci_probe':
flexcop-pci.c:(.text+0x20d28d2): undefined reference to `flexcop_dma_allocate'
flexcop-pci.c:(.text+0x20d2907): undefined reference to `flexcop_dma_allocate'
flexcop-pci.c:(.text+0x20d2923): undefined reference to `flexcop_dma_free'Reported-by: Fengguang Wu
Signed-off-by: Mauro Carvalho Chehab
14 Aug, 2012
38 commits
-
This patch fixes section mismatch warnings for
davinci video drivers.[mchehab@redhat.com: applied it as a fixup over the previous (and wrong) changeset c6afbf2]
Signed-off-by: Lad, Prabhakar
Signed-off-by: Manjunath Hadli
Acked-by: Laurent Pinchart
Signed-off-by: Mauro Carvalho Chehab -
None of those drivers use private ioctl's, as they all got converted
to the standard V4L2 ones.Signed-off-by: Mauro Carvalho Chehab
-
The frontends/tuners are used inside the common part of the driver.
Signed-off-by: Mauro Carvalho Chehab
-
siano is, in fact, 2 drivers: one for MMC and one for USB, plus
a common bus-independent code. Break it accordingly.Signed-off-by: Mauro Carvalho Chehab
-
In order to better organize the directory tree, move the
saa7146 common driver to its own directory.Signed-off-by: Mauro Carvalho Chehab
-
Move the tuners one level up, as the "common" directory will be used
by drivers that are shared between more than one driver.Signed-off-by: Mauro Carvalho Chehab
-
b2c2 is, in fact, 2 drivers: one for PCI and one for USB, plus
a common bus-independent code. Break it accordingly.Signed-off-by: Mauro Carvalho Chehab
-
The remaining dvb drivers are pci, so rename them to match the
bus.Signed-off-by: Mauro Carvalho Chehab
-
As media/dvb will be removed, move it to a proper place.
Signed-off-by: Mauro Carvalho Chehab
-
Move firewire to one level up, as the dvb subdirectory will be
removed.Signed-off-by: Mauro Carvalho Chehab
-
Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.Signed-off-by: Mauro Carvalho Chehab
-
just like the V4L2 core, move the DVB core to drivers/media, as the
intention is to get rid of both "video" and "dvb" directories.Signed-off-by: Mauro Carvalho Chehab
-
Currently, the v4l2 core is mixed together with other non-core drivers.
Move them into a separate directory.Signed-off-by: Mauro Carvalho Chehab
-
drivers/media/rc/Kconfig:291:warning: multi-line strings not supported
Signed-off-by: Mauro Carvalho Chehab
-
Functional changes
PID filter is default to off and controlled from dvb-usb-v2
Driver now supports suspend and resume changes in dvb-usb-v2
USB bus repeater functions have been removed.
Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
Support for i.MX25 in mx2_camera.c has been broken
for a year. Furthermore, i.MX25 video capture HW
doesn't have much in common with i.MX27. A separate
driver would be desirable.Signed-off-by: Javier Martin
Signed-off-by: Mauro Carvalho Chehab -
i.MX25 support is known to have been broken for almost a year.
Signed-off-by: Javier Martin
Signed-off-by: Mauro Carvalho Chehab -
devm_kzalloc() eliminates the need to free explicitly thereby
making the code a bit simpler.Signed-off-by: Sachin Kamat
Acked-by: Sylwester Nawrocki
Signed-off-by: Mauro Carvalho Chehab -
The correct place to put i2c_gate_ctrl is before calling tda18271_attach,
because the driver tda18271 will use it to enable or disable the i2c-bus
from the demodulator to the tuner.And thus eliminate the error message: "Unknown device (255) detected
@ 1-00c0, device not supported" in the driver tda18271.In the device kworld_sbtvd (hybrid analog and digital TV) the control
of the i2c-bus to tuner is done in the analog demodulator and not in
the digital demodulator.Signed-off-by: Manoel Pinheiro
Signed-off-by: Mauro Carvalho Chehab -
The lirc TX functionality expects the process which writes (TX) data to
the lirc dev to sleep until the actual data has been transmitted by the
hardware.Since the same timeout calculation is duplicated in more than one driver
(and would have to be duplicated in even more drivers as they gain TX
support), it makes sense to move this timeout calculation to the lirc
layer instead.At the same time, centralize some of the sanity checks.
Signed-off-by: David Härdeman
Cc: Jarod Wilson
Signed-off-by: Mauro Carvalho Chehab -
On Mon, 2012-08-13 at 19:58 +0300, Dan Carpenter wrote:
> Hello Mauro Carvalho Chehab,
>
> The patch db6651a9ebb3: "[media] lmedm04: fix build" from Aug 12,
> 2012, leads to the following warning:
> drivers/media/dvb/dvb-usb-v2/lmedm04.c:769 lme2510_download_firmware()
> error: usb_control_msg() 'data' too small (128 vs 265)
>
> 737 data = kzalloc(128, GFP_KERNEL);
> ^^^
> data is 128 bytes.Control isn't used, so remove it.
Reported-by: Dan Carpenter
Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
When the TEI bit is raised, we should not trust any of the contents of
the packet in question, including but not limited to its PID number.Considering that we don't trust the PID number of this packet, we should
not proceed to check the packet counter (if dvb_demux_tscheck is set).We should expect to see at least one discontinuity after a bad packet is
received, so any time a TEI is detected, a following TS packet counter
mismatch is to be expected.There is no real reason to ever allow bad packets to pass through the
kernel demux, other than for purposes of attempting error correction via
software or statistical information.However, since we have always passed these bad packets though the demux,
we should not change this default behavior.Without altering module options, this patch merely prevents the
TS packet counter check on packets containing a raised TEI.If module option dvb_demux_feed_err_pkts is set to 0, the kernel demux
will drop these error packets entirely, preventing any possibility of
corruption caused by userspace programs that are expecting valid data.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
This patch fixes the following sparse warnings
by removing use of duplicate const.drivers/media/video/cx88/cx88.h:152:40:
warning: duplicate const
drivers/media/video/cx88/cx88-core.c:256:33:
warning: duplicate const
drivers/media/video/cx88/cx88-alsa.c:769:41:
warning: duplicate constAs commented by Jonathan Nieder:
These double "const" were introduced in v2.6.37-rc1~64^2~464 (V4L/DVB:
drivers/media: Make static data tables and strings const, 2010-08-25).The address of an array is already immutable by definition, so for
what it's worth, with or without a clarified commit message,[mchehab@redhat.com: Tested with "gcc -s" (version 4.7.0):
the produced asm is indeed equal before and after this patch]
Signed-off-by: Emil Goode
Acked-by: Jonathan Nieder
Signed-off-by: Mauro Carvalho Chehab -
No functional changes. It just improves the description of the frontend
status, using Documentation/kernel-doc-nano-HOWTO.txt for the status
enumeration, and a table inside the DocBook.Signed-off-by: Mauro Carvalho Chehab
-
The IR diode on the RX51 is connected to the GPT9. This data is needed
for the IR driver to function.Signed-off-by: Timo Kokkonen
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab -
This is the driver for the IR transmitter diode found on the Nokia
N900 (also known as RX51) device. The driver is mostly the same as
found in the original 2.6.28 based kernel that comes with the device.The following modifications have been made compared to the original
driver version:- Adopt to the changes that has happen in the kernel during the past
five years, such as the change in the include paths- The OMAP DM-timers require much more care nowadays. The timers need
to be enabled and disabled or otherwise many actions fail. Timers
must not be freed without first stopping them or otherwise the timer
cannot be requested again.The code has been tested with sending IR codes with N900 device
running Debian userland. The device receiving the codes was Anysee
DVB-C USB receiver.Signed-off-by: Timo Kokkonen
Cc: Tony Lindgren
Cc: linux-omap@vger.kernel.org
Cc: Sakari Ailus
Signed-off-by: Mauro Carvalho Chehab -
Cc: Andy Shevchenko
Signed-off-by: Antti Palosaari
Signed-off-by: Mauro Carvalho Chehab -
[crope@iki.fi: fix trivial merge conflict]
Signed-off-by: Andy Shevchenko
Signed-off-by: Antti Palosaari
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Cc: Anssi Hannula
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Cc: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Acked-by: Antti Palosaari
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Andy Shevchenko
Signed-off-by: Mauro Carvalho Chehab -
This callback were meant to allow overriding a FE callback, before its
call, but it is not really needed, as the callback can be intercepted
after tuner attachment.Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5
application will produce different effects than a DVBv3 one.So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab
Acked-by: Antti Palosaari
Reviewed-by: Antti Palosaari -
Signed-off-by: Andy Shevchenko
Cc: Mauro Carvalho Chehab
Cc: linux-media@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab -
The various devm_ functions allocate memory that is released when a driver
detaches. This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.Signed-off-by: Julia Lawall
Signed-off-by: Mauro Carvalho Chehab
