16 Aug, 2013
1 commit
-
There are two improvements for this commit:
- Add comparing pll lock condition after while loop. It can
fix potential fake timeout problem caused by the code is just
scheduled out before compare the timeout, and the time of
scheduling out are more than one jiffies.- Move timeout assignment more close to compare the timeout.
It can reduce the possibility the code is scheduled out, and
the timeout can be more precise.Signed-off-by: Peter Chen
Acked-by: Sascha Hauer
Signed-off-by: Shawn Guo
17 Jun, 2013
1 commit
-
MLB PLL should be handled internally in MLB driver,
so remove it from pllv3.Signed-off-by: Jiada Wang
CC: Dirk Behme
Signed-off-by: Shawn Guo
22 Nov, 2012
2 commits
-
Now that the additional enable bits in the enet PLL are handled
as gates, the gate_mask is identical for all plls. Remove the
gate_mask from the code and use the BM_PLL_ENABLE bit for
enabling/disabling the PLL.Signed-off-by: Sascha Hauer
Acked-by: Shawn Guo -
In current code the ethernet PLL is not handled correctly. The PLL runs at 500MHz
and has different outputs. Only the enet reference clock is implemented. This
patch changes the PLL so that it outputs 500MHz and adds the additional outputs
as dividers. This now matches the datasheet which says:> This PLL synthesizes a low jitter clock from 24 MHz reference clock.
> The PLL outputs a 500 MHz clock. The reference clocks generated by this PLL are:
> • Ref_PCIe = 125 MHz
> • Ref_SATA = 100 MHz
> • Ref_ethernet, which is configurable based on the PLL_ENET[1:0] register field.Signed-off-by: Sascha Hauer
Acked-by: Shawn Guo
02 May, 2012
1 commit
-
This PLL is found on i.MX6 SoCs
Signed-off-by: Shawn Guo
