Doug / smarc-fsl-linux-kernel

16 Apr, 2012

1 commit

03 Apr, 2012

1 commit

  • ed359a3b7   Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net ... Browse Code »

    Pull networking fixes from David Miller:

    1) Provide device string properly for USB i2400m wimax devices, also
    don't OOPS when providing firmware string. From Phil Sutter.

    2) Add support for sh_eth SH7734 chips, from Nobuhiro Iwamatsu.

    3) Add another device ID to USB zaurus driver, from Guan Xin.

    4) Loop index start in pool vector iterator is wrong causing MAC to not
    get configured in bnx2x driver, fix from Dmitry Kravkov.

    5) EQL driver assumes HZ=100, fix from Eric Dumazet.

    6) Now that skb_add_rx_frag() can specify the truesize increment
    separately, do so in f_phonet and cdc_phonet, also from Eric
    Dumazet.

    7) virtio_net accidently uses net_ratelimit() not only on the kernel
    warning but also the statistic bump, fix from Rick Jones.

    8) ip_route_input_mc() uses fixed init_net namespace, oops, use
    dev_net(dev) instead. Fix from Benjamin LaHaise.

    9) dev_forward_skb() needs to clear the incoming interface index of the
    SKB so that it looks like a new incoming packet, also from Benjamin
    LaHaise.

    10) iwlwifi mistakenly initializes a channel entry as 2GHZ instead of
    5GHZ, fix from Stanislav Yakovlev.

    11) Missing kmalloc() return value checks in orinoco, from Santosh
    Nayak.

    12) ath9k doesn't check for HT capabilities in the right way, it is
    checking ht_supported instead of the ATH9K_HW_CAP_HT flag. Fix from
    Sujith Manoharan.

    13) Fix x86 BPF JIT emission of 16-bit immediate field of AND
    instructions, from Feiran Zhuang.

    14) Avoid infinite loop in GARP code when registering sysfs entries.
    From David Ward.

    15) rose protocol uses memcpy instead of memcmp in a device address
    comparison, oops. Fix from Daniel Borkmann.

    16) Fix build of lpc_eth due to dev_hw_addr_rancom() interface being
    renamed to eth_hw_addr_random(). From Roland Stigge.

    17) Make ipv6 RTM_GETROUTE interpret RTA_IIF attribute the same way
    that ipv4 does. Fix from Shmulik Ladkani.

    18) via-rhine has an inverted bit test, causing suspend/resume
    regressions. Fix from Andreas Mohr.

    19) RIONET assumes 4K page size, fix from Akinobu Mita.

    20) Initialization of imask register in sky2 is buggy, because bits are
    "or'd" into an uninitialized local variable. Fix from Lino
    Sanfilippo.

    21) Fix FCOE checksum offload handling, from Yi Zou.

    22) Fix VLAN processing regression in e1000, from Jiri Pirko.

    * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
    sky2: dont overwrite settings for PHY Quick link
    tg3: Fix 5717 serdes powerdown problem
    net: usb: cdc_eem: fix mtu
    net: sh_eth: fix endian check for architecture independent
    usb/rtl8150 : Remove duplicated definitions
    rionet: fix page allocation order of rionet_active
    via-rhine: fix wait-bit inversion.
    ipv6: Fix RTM_GETROUTE's interpretation of RTA_IIF to be consistent with ipv4
    net: lpc_eth: Fix rename of dev_hw_addr_random
    net/netfilter/nfnetlink_acct.c: use linux/atomic.h
    rose_dev: fix memcpy-bug in rose_set_mac_address
    Fix non TBI PHY access; a bad merge undid bug fix in a previous commit.
    net/garp: avoid infinite loop if attribute already exists
    x86 bpf_jit: fix a bug in emitting the 16-bit immediate operand of AND
    bonding: emit event when bonding changes MAC
    mac80211: fix oper channel timestamp updation
    ath9k: Use HW HT capabilites properly
    MAINTAINERS: adding maintainer for ipw2x00
    net: orinoco: add error handling for failed kmalloc().
    net/wireless: ipw2x00: fix a typo in wiphy struct initilization
    ...

    Linus Torvalds
     

02 Apr, 2012

1 commit

  • 81213b5e8   rose_dev: fix memcpy-bug in rose_set_mac_address ... Browse Code »

    If both addresses equal, nothing needs to be done. If the device is down,
    then we simply copy the new address to dev->dev_addr. If the device is up,
    then we add another loopback device with the new address, and if that does
    not fail, we remove the loopback device with the old address. And only
    then, we update the dev->dev_addr.

    Signed-off-by: Daniel Borkmann
    Signed-off-by: David S. Miller

    danborkmann@iogearbox.net
     

29 Mar, 2012

1 commit

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

01 Sep, 2009

1 commit

06 Jul, 2009

1 commit

13 Jun, 2009

1 commit

22 Jan, 2009

2 commits

05 Dec, 2007

1 commit

11 Oct, 2007

1 commit

15 Feb, 2007

1 commit

  • cd354f1ae   [PATCH] remove many unneeded #includes of sched.h ... Browse Code »

    After Al Viro (finally) succeeded in removing the sched.h #include in module.h
    recently, it makes sense again to remove other superfluous sched.h includes.
    There are quite a lot of files which include it but don't actually need
    anything defined in there. Presumably these includes were once needed for
    macros that used to live in sched.h, but moved to other header files in the
    course of cleaning it up.

    To ease the pain, this time I did not fiddle with any header files and only
    removed #includes from .c-files, which tend to cause less trouble.

    Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
    arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
    allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
    configs in arch/arm/configs on arm. I also checked that no new warnings were
    introduced by the patch (actually, some warnings are removed that were emitted
    by unnecessarily included header files).

    Signed-off-by: Tim Schmielau
    Acked-by: Russell King
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Tim Schmielau
     

18 Dec, 2006

1 commit

04 Jul, 2006

1 commit

01 Jul, 2006

1 commit

04 May, 2006

1 commit

13 Sep, 2005

1 commit

  • d2ce4bc34   [ROSE]: ROSE has no ARP ... Browse Code »

    ARP over ROSE does not exist so it's obviously not implemented on any
    ROSE stack, so the ROSE interfaces really should default to IFF_NOARP.

    Signed-off-by: Ralf Baechle DL5RB
    Signed-off-by: David S. Miller

    Ralf Baechle
     

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds