30 Apr, 2011
33 commits
-
The usb_create_sysfs_intf_files() function always returned zero even
if it failed to create sysfs fails. Since this is a desired behaviour
there is no need to return return code at all. This commit changes
function's return type (form int) to void.Signed-off-by: Michal Nazarewicz
Cc: Sergey Senozhatsky
Signed-off-by: Greg Kroah-Hartman -
This patch (as1452b) adds a new test case to the usbtest driver. Test
24 exercises the unlink-from-queue pathways in the host. It queues a
user-specified number of bulk-OUT URBs of user-specified size, unlinks
the fourth- and second-from-last URBs in the queue, and then waits to
see if all the URBs complete in the expected way (except of course
that the unlinked URBs might complete normally, if they weren't
unlinked soon enough).This new test has confirmed the existence of a bug in the ehci-hcd
driver, to be fixed by a separate patch.Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
Tegra USB1 port needs to issue Port Reset twice internally, otherwise it
fails to enumerate devices attached to itSigned-off-by: Jim Lin
Signed-off-by: Olof Johansson
[ squash two patches into one and minor style cleanups ]
Signed-off-by: Mike Rapoport
Signed-off-by: Greg Kroah-Hartman -
This patch uses the resource_size help function instead of
manually calculating the resource size. It can reduce the chance
of introducing off-by-one errors.Signed-off-by: Jingoo Han
Signed-off-by: Greg Kroah-Hartman -
The __devinit and __devexit macros were added to probe and remove
functions. The macros move the probe and remove functions to the
devinit and devexit sections.Signed-off-by: Jingoo Han
Signed-off-by: Greg Kroah-Hartman -
This commit fixes an embarrassing bug in the "storage_common:
use kstrto*()" patch which caused fsg_store_ro() to return
zero instead of the length of the consumed buffer.Signed-off-by: Michal Nazarewicz
Signed-off-by: Greg Kroah-Hartman -
the_controller is allocated in dummy_hcd_probe() and is NULL if the
allocation failed. The probe function of the udc driver is dereferencing
this pointer and fault.
Alan Stern suggested to abort the dummy_hcd driver probing so the module
is not loaded. The is abort-on-error has been also added to the udc
driver.Signed-off-by: Sebastian Andrzej Siewior
Acked-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
If USB type detections fails, we run into default and return 0.
Signed-off-by: Sebastian Andrzej Siewior
Acked-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
Current renesas_usbhs was designed to save power when USB is not connected.
And it assumed platform uses callback to notify connection/disconnection
by external interrupt.But some SuperH / platform board doesn't have such feature.
This patch adds autonomy mode which detect USB connection/disconnection
by internal interrupt.
But power will be always ON when autonomy mode is selected.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
This delay is used to overjump debounce.
And, this patch also move usbhsc_drvcllbck_notify_hotplug to global,
because it will be called from other files.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
usbhs_status_get_each_irq/usbhs_irq_callback_update might be called
with mod == NULLSigned-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
usbhs_pdev_to_priv function will be used in other files.
Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
The callback function which is called from platform must be removed
if module removed.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
There are some USB Host which doesn't notice disconnection at once.
And it might try some request after reconnection with old settings.
Current renesas_usbhs will crash in such case.
This patch prevent this issue.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
Current renesas_usbhs driver was using spin_trylock to avoid
dead lock / nest lock.
But acording to CONFIG_DEBUG_SPINLOCK, it is BUG under UP environment.
This patch add usbhsg_trylock to avoid this issue.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
Because pipe buffer allocation is very picky and difficult,
current renesas_usbhs driver is not caring pipe re-allocation.In this situation, driver will create new pipe without caring old pipe
if "usbhsg_ep_enable" is called after "usbhsg_ep_disable" on current driver.
This mean the limited pipe and buffer will be used as waste.
But it is possible to re-use same buffer to same pipe.By this patch, driver will initialize pipe when it detected new connection or
new gadget, and doesn't try re-allocation for same pipe in above case.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
Pipe buffer should be cleaned before using it,
but should NOT be cleaned in pipe "prepare" function.
Because the pipe might be working in such timing.
This patch fixup this issue.Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
g_printer reqiured "set interface" request from host. Not all hosts send
this request. This patch enable the interface when it get "set
configuration" request from host.Signed-off-by: Jonas Andersson
Signed-off-by: Greg Kroah-Hartman -
Stripping the direction bit off will produce an
invalid descriptor.Signed-off-by: Sven Schnelle
Signed-off-by: Greg Kroah-Hartman -
The current code doesn't set it, so linux complains about
it when connected, and ignores the device:[104611.068082] usb 1-5: new high speed USB device using ehci_hcd and address 127
[104611.088368] usb 1-5: Invalid ep0 maxpacket: 0Signed-off-by: Sven Schnelle
Signed-off-by: Greg Kroah-Hartman -
Current code returns 0 even if it can't handle the request.
This leads to timeouts when an unhandled request is sent:Bus 001 Device 003: ID 0525:c0de Netchip Technology, Inc.
Device Descriptor:
[..]
can't get device qualifier: Connection timed out
[..]change the code to return EOPNOTSUPP in such cases.
Signed-off-by: Sven Schnelle
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Kuninori Morimoto
Signed-off-by: Greg Kroah-Hartman -
This patch fixup cast warning on 64 bit compiler
Signed-off-by: Kuninori Morimoto
Reported-by: Greg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman -
This patch (as1459) updates the documentation for the pre_reset method
in struct usb_driver. When a driver is notified of an impending
reset, it must cancel all outstanding I/O and not start any new I/O
until it has been notified that the reset is complete.As far as I know, most existing drivers that implement pre_reset do
this now. The major exceptions appear to be the SpeedTouch and
CDC-WDM drivers.Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
Network interface is handled by upcoming gt_b3730 module.
Removed "GT-B3710" from comment, it is another modem with another USB ID.
Signed-off-by: Marius B. Kotsbak
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
This patch
- ensures no IO takes place during resets
- reports resets to user spaceSigned-off-by: Oliver Neukum
Signed-off-by: Greg Kroah-Hartman -
This patch fixes a problem where data received from the gps is sometimes
transferred incompletely to the serial port. If used in native mode now
all data received via the bulk queue will be forwarded to the serial
port.Signed-off-by: Hermann Kneissel
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
Commit 1c6529e92b "USB: gadget: g_multi: fixed vendor and
product ID" replaced g_multi's vendor and product ID with
proper ID's from Linux Foundation. This commit now updates
INF files in the Documentation/usb directory which were
omitted in the original commit.Signed-off-by: Michal Nazarewicz
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
Adding support for the TavIR STK500 (id 0403:FA33)
Atmel AVR programmer device based on FTDI FT232RL.Signed-off-by: Benedek László
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
Tested on my phone, the ttyUSB device is created and is fully
functional.Signed-off-by: Elizabeth Jennifer Myers
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
This patch adds 4 device IDs for CP2102 based devices manufactured by
AC-Services. See http://www.ac-services.eu for further info.Signed-off-by: Craig Shelley
Cc: stable
Signed-off-by: Greg Kroah-Hartman
19 Apr, 2011
7 commits
-
This is needed to help resolve some xhci issues and other minor
differences.Signed-off-by: Greg Kroah-Hartman
-
* 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
msm: timer: fix missing return value
msm: Remove extraneous ffa device check -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xen-kbdfront - fix mouse getting stuck after save/restore
Input: estimate number of events per packet
Input: evdev - indicate buffer overrun with SYN_DROPPED
Input: document event types and codes and their intended use
Input: add KEY_IMAGES specifically for AL Image Browser
Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe()
Input: h3600_ts - fix error handling at connect
Input: twl4030_keypad - avoid potential NULL-pointer dereference -
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: add blk_run_queue_async
block: blk_delay_queue() should use kblockd workqueue
md: fix up raid1/raid10 unplugging.
md: incorporate new plugging into raid5.
md: provide generic support for handling unplug callbacks.
md - remove old plugging code.
md/dm - remove remains of plug_fn callback.
md: use new plugging interface for RAID IO.
block: drop queue lock before calling __blk_run_queue() for kblockd punt
Revert "block: add callback function for unplug notification"
block: Enhance new plugging support to support general callbacks -
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/powermac: Build fix with SMP and CPU hotplug
powerpc/perf_event: Skip updating kernel counters if register value shrinks
powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabled
powerpc: Fix oops if scan_dispatch_log is called too early
powerpc/pseries: Use a kmem cache for DTL buffers
powerpc/kexec: Fix regression causing compile failure on UP
powerpc/85xx: disable Suspend support if SMP enabled
powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZE
powerpc/book3e: Fix CPU feature handling on 64-bit e5500
powerpc: Check device status before adding serial device
powerpc/85xx: Don't add disabled PCIe devices -
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits)
Btrfs: fix free space cache leak
Btrfs: avoid taking the chunk_mutex in do_chunk_alloc
Btrfs end_bio_extent_readpage should look for locked bits
Btrfs: don't force chunk allocation in find_free_extent
Btrfs: Check validity before setting an acl
Btrfs: Fix incorrect inode nlink in btrfs_link()
Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir()
Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr()
Btrfs: make uncache_state unconditional
btrfs: using cached extent_state in set/unlock combinations
Btrfs: avoid taking the trans_mutex in btrfs_end_transaction
Btrfs: fix subvolume mount by name problem when default mount subvolume is set
fix user annotation in ioctl.c
Btrfs: check for duplicate iov_base's when doing dio reads
btrfs: properly handle overlapping areas in memmove_extent_buffer
Btrfs: fix memory leaks in btrfs_new_inode()
Btrfs: check for duplicate iov_base's when doing dio reads
Btrfs: reuse the extent_map we found when calling btrfs_get_extent
Btrfs: do not use async submit for small DIO io's
Btrfs: don't split dio bios if we don't have to
...
