19 Jan, 2011
4 commits
-
There's nothing worth hiding under the ifdef in the platform DMA
definitions, and we certainly don't want board code adding this in to
their platform data definitions, so we always expose the slave rx/tx
and device pointer members instead.Signed-off-by: Paul Mundt
-
All of the muxed IRQs presently populate the IRQ array verbosely, this
simply provides a trivial helper to do it for them.Signed-off-by: Paul Mundt
-
All users of the platform port data specify a mapbase where the driver
later derives the membase from. Now that UPF flags are taken in to
account for generic ioremapping we can kill off the port-specific membase
clobbering and simply use the generic paths.This derives from a time when sh64 was not capable of using the generic
ioremap implementation and had employed early bolted DTLB mappings for
port access, which is no longer an issue.Signed-off-by: Paul Mundt
-
Now that the clock string isn't used by the driver anymore, kill it off
from the platform structure.Signed-off-by: Paul Mundt
13 Jan, 2011
1 commit
-
…nux-2.6 into common/serial-rework
Conflicts:
arch/sh/kernel/cpu/sh2/setup-sh7619.c
arch/sh/kernel/cpu/sh2a/setup-mxg.c
arch/sh/kernel/cpu/sh2a/setup-sh7201.c
arch/sh/kernel/cpu/sh2a/setup-sh7203.c
arch/sh/kernel/cpu/sh2a/setup-sh7206.c
arch/sh/kernel/cpu/sh3/setup-sh7705.c
arch/sh/kernel/cpu/sh3/setup-sh770x.c
arch/sh/kernel/cpu/sh3/setup-sh7710.c
arch/sh/kernel/cpu/sh3/setup-sh7720.c
arch/sh/kernel/cpu/sh4/setup-sh4-202.c
arch/sh/kernel/cpu/sh4/setup-sh7750.c
arch/sh/kernel/cpu/sh4/setup-sh7760.c
arch/sh/kernel/cpu/sh4a/setup-sh7343.c
arch/sh/kernel/cpu/sh4a/setup-sh7366.c
arch/sh/kernel/cpu/sh4a/setup-sh7722.c
arch/sh/kernel/cpu/sh4a/setup-sh7723.c
arch/sh/kernel/cpu/sh4a/setup-sh7724.c
arch/sh/kernel/cpu/sh4a/setup-sh7763.c
arch/sh/kernel/cpu/sh4a/setup-sh7770.c
arch/sh/kernel/cpu/sh4a/setup-sh7780.c
arch/sh/kernel/cpu/sh4a/setup-sh7785.c
arch/sh/kernel/cpu/sh4a/setup-sh7786.c
arch/sh/kernel/cpu/sh4a/setup-shx3.c
arch/sh/kernel/cpu/sh5/setup-sh5.c
drivers/serial/sh-sci.c
drivers/serial/sh-sci.h
include/linux/serial_sci.h
25 May, 2010
1 commit
-
asm/dmaengine.h no longer exists, update for the shared linux/sh_dma.h
header.Signed-off-by: Paul Mundt
23 Mar, 2010
1 commit
-
This patch replaces the sh_dmae_slave_chan_id enum
with an unsigned int. The purpose of this chainge is
to make it possible to separate the slave id enums
from the dmaengine header.The slave id enums varies with processor model, so in
the future it makes sense to put these in the processor
specific headers together with the pinmux enums.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
10 Mar, 2010
1 commit
-
This patch fixes a build failure for various arm based defconfigs
[1][2][3] and maybe other architectures/configs.The build failure was introduced by the sh specific patch [4]
"serial: sh-sci: Add DMA support"
by Guennadi LiakhovetskiPatch against linux-next of 20100309
References:
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/2248992/
[2] http://kisskb.ellerman.id.au/kisskb/buildresult/2248996/
[3] http://kisskb.ellerman.id.au/kisskb/buildresult/2248998/
[4] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=73a19e4c0301908ce6346715fd08a74308451f5aSigned-off-by: Peter Huewe
Signed-off-by: Paul Mundt
02 Mar, 2010
1 commit
-
Support using DMA for sending and receiving data over SCI(F) interfaces of
various SH SoCs.Signed-off-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt
24 Jun, 2009
2 commits
-
This permits each port to select its own SCBRR calculation algorithm,
rather than having it all ifdef'ed in the header. There are presently
only 5 different variations that all parts fall under.Signed-off-by: Paul Mundt
-
This moves all of the SCSCR_INIT definitions in to the platform data,
for future consolidation.Signed-off-by: Paul Mundt
08 May, 2009
2 commits
-
Use enable/disable hooks for clock framework integration.
Make sure we control the clock for the serial console as well.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Remove unused early_sci_setup() function from sh-sci.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
26 Feb, 2008
1 commit
-
This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.Signed-off-by: Paul Mundt