20 Oct, 2010
1 commit
-
Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.Updated with fixes for OMAP from Jason Wang
and Tony Lindgren , and fix for versatile express from
Lorenzo Pieralisi .Signed-off-by: Jeremy Kerr
Signed-off-by: Lorenzo Pieralisi
Signed-off-by: Jason Wang
Signed-off-by: Tony Lindgren
Tested-by: Kevin Hilman
09 Mar, 2010
1 commit
-
Conflicts:
arch/arm/mach-mx2/devices.c
arch/arm/mach-mx2/devices.h
sound/soc/pxa/pxa-ssp.c
26 Feb, 2010
1 commit
24 Feb, 2010
1 commit
-
Move the include/mach files out of plat-s3c and into the relevant
machine files. This does mean copying the files, but there is nowhere
else to put them.Signed-off-by: Ben Dooks
16 Feb, 2010
1 commit
-
Makes it consistent with VMALLOC_START
Tested-by: H Hartley Sweeten
Signed-off-by: Andreas Fenkart
Signed-off-by: Russell King
13 Feb, 2010
1 commit
-
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
arch/arm/*/include/*/debug-macro.SSigned-off-by: Tony Lindgren
Signed-off-by: Russell King
14 Dec, 2009
1 commit
-
Anders Grafström reports that footbridge fails to build after 1c4a4f4.
Fix this by adding the necessary definitions for __pfn_to_bus and
__bus_to_pfn.Reported-by: Anders Grafström
Signed-off-by: Russell King
01 Dec, 2009
2 commits
-
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are not consecutive. However, referencing [1] it
is the correct thing to replace these with A-B or A-C as apropriate.[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
section 4iii 'Year of publication'Signed-off-by: Ben Dooks
Signed-off-by: Simtec Linux Team
Signed-off-by: Ben Dooks -
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are consecutive. Tidy these up to be A-B or A-C
as appropriate and to comply better with copyright standards [1][1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
section 4iii 'Year of publication'Signed-off-by: Ben Dooks
Signed-off-by: Simtec Linux Team
Signed-off-by: Ben Dooks
31 Jul, 2009
1 commit
-
Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c,
now that the nand driver also support the s3c64xx devices.Signed-off-by: Peter Korsgaard
Signed-off-by: Ben Dooks
08 Mar, 2009
1 commit
-
Move the IRQ_EINT sleep control to be available to all
s3c impelmentations. Since s3c_irqext_wake is not large,
place it in arch/arm/plat-s3c/pm.c as adding it to a new
file would be a waste of compile time.Signed-off-by: Ben Dooks
19 Dec, 2008
1 commit
-
The commit 39263db7986bf15c753f6847699107bdf5a2e318 added
a default implementation which is shared if
needed between all the s3c implementations. Remove the
s3c24a0 version which is the same as this.Signed-off-by: Ben Dooks
16 Dec, 2008
7 commits
-
Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.cSigned-off-by: Ben Dooks
-
Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.Signed-off-by: Ben Dooks
-
Split the timer pending code out to a seperate per-machine
header so that when compiling for mach-s3c2410 or mach-s3c24a0
we can use the right timer code without having to #ifdef the
timer driver.Signed-off-by: Ben Dooks
-
Initial architecture support for the S3C24A0 ARCH_S3C24A0.
We don't yet add an kconfig entry in the main arch/arm/Kconfig
file as the series is not complete, so that is left until enough
support is in to be useful.Signed-off-by: Ben Dooks
-
Split the map.h definitions into common S3C24XX code by
adding arch/arm/plat-s3c24xx/include/plat/map.h and
altering the machine specific header for the S3C24A0.As we add a new we move the original one
in arch/arm/plat-s3c include directory to be called
map-base.h to distinguish the two files.Signed-off-by: Ben Dooks
-
Add the necessary debug macros for the S3C24A0 to enable
kernel debugging, and fix a bug with selecting the wrong
default debug implementation from the base include.Signed-off-by: Ben Dooks
-
Add initial arch/arm/mach-s3c24a0/include/mach header
files for supporting Samsung S3C24A0 SoC.Signed-off-by: Sandeep Patil
Signed-off-by: Ben Dooks
