31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
26 Mar, 2011
3 commits
-
Signed-off-by: Hans de Goede
Acked-by: Guenter Roeck
Signed-off-by: Jean Delvare -
Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.Signed-off-by: Jean Delvare
Acked-by: Hans de Goede
Acked-by: Guenter Roeck -
The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.Signed-off-by: Jean Delvare
Acked-by: Hans de Goede
Acked-by: Guenter Roeck
23 Mar, 2011
1 commit
-
This driver exposes the sysfs nodes of the TWL4030 MADC module.
All the voltage channel values are expressed in terms of mV. Channel 13
and channel 14 are reserved. There are channels which represent
temperature and current the output is represented by celcius
and mA respectively.Signed-off-by: Keerthy
Acked-by: Guenter Roeck
Signed-off-by: Samuel Ortiz
22 Mar, 2011
7 commits
-
Configuration for ads1015 gain and datarate is possible via
devicetree or platform data.This is a followup patch to previous ads1015 patches on Jean Delvares
tree.Signed-off-by: Dirk Eibach
Signed-off-by: Jean Delvare -
Signed-off-by: Dirk Eibach
Signed-off-by: Jean Delvare -
SMSC SCH5627 Super I/O chips include complete hardware monitoring
capabilities. They can monitor up to 5 voltages, 4 fans and 8
temperatures.The hardware monitoring part of the SMSC SCH5627 is accessed by talking
through an embedded microcontroller. An application note describing the
protocol for communicating with the microcontroller is available upon
request. Please mail me if you want a copy.Signed-off-by: Hans de Goede
Signed-off-by: Jean Delvare -
Add support for detection of the National Semiconductor LM75A using the ID
register value.Signed-off-by: Len Sorensen
Signed-off-by: Jean Delvare -
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck
Acked-by: Eric Piel
Acked-by: Jonathan Cameron
Tested-by: Eric Piel
Tested-by: Takashi Iwai -
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck
Acked-by: Eric Piel
Acked-by: Jonathan Cameron
Tested-by: Eric Piel
Tested-by: Takashi Iwai -
Apparently users are interested in this information, so let's provide
it.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck
15 Mar, 2011
11 commits
-
Note that these 2 are register compatible and report the same superio id,
but they are 2 distinct chips / models!Signed-off-by: Hans de Goede
Tested-by: Thomas Faber
Tested-by: Alexey Sychev
Tested-by: Dieter Bloms
Signed-off-by: Guenter Roeck -
Note that this patch also makes 2 changes to the code paths for the f71889fg
to keep the code unified between the 2 (for simplicities sake). Both of these
are harmless for then f71889fg:1) The first change is to always set the FAN_PROG_SEL bit to 0. This influences
accesses to some banked fan / pwm registers. On the f71889fg no registers
which we use are banked. On the f71889ed however some more fan registers
have been banked including one which we use, by making the FAN_PROG_SEL bit
0, address 0x96 will point to the right register.
2) The second change is to see a FANx_TEMP_SEL value of 0 as pointing to
a PECI / AMDSI value, and thus disable our pwm related sysfs attr.
This is correct for the f71889ed and on the f71889fg 0 is a reserved
value, so we should never see it and if we do, disabling the pwm related
sysfs attr is a sane thing to do.Signed-off-by: Hans de Goede
Tested-by: Thomas Greve
Tested-by: Sander Eikelenboom
Signed-off-by: Guenter Roeck -
This patch adds support for NCT6775F and NCT6776F to the w83627ehf driver.
Signed-off-by: Guenter Roeck
Tested-by: Ian Dobson (NCT6776F)
Tested-by: Zachary Marzec (ASUS P8P67 PRO/NCT6776F)
Acked-by: Ian Dobson -
Signed-off-by: Guenter Roeck
Acked-by: Ian Dobson -
Add support for 4th temperature sensor on W83677HG-B.
Display temperature labels on W83677HG-B to report temperature sources.Signed-off-by: Guenter Roeck
Acked-by: Ian Dobson -
Some fan control chips support a configuration register to set the number of
tachometer pulses per fan revolution. Add an ABI attribute to support this
configuration register.Signed-off-by: Guenter Roeck
Acked-by: Jean Delvare -
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear
Technology.Signed-off-by: Per Dalen
Signed-off-by: Guenter Roeck -
Signed-off-by: Guenter Roeck
Acked-by: Jonathan Cameron -
EMC6D103S is similar to EMC6D103, only it does not support registers 62[5:7],
6D[0:7], and 6E[0:7]. Register respective sysfs attributes and update affected
registers for all other chips only.Signed-off-by: Guenter Roeck
Acked-by: Jean Delvare -
This patch adds support for hardware monitoring of Lineage Compact Power Line
Power Entry Modules.Reviewed-by: Tom Grennan
Signed-off-by: Guenter Roeck -
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller
Signed-off-by: Roland Stigge
Signed-off-by: Guenter Roeck
18 Feb, 2011
1 commit
-
Add the PCI ID to support the internal temperature sensor of the
AMD "Llano" and "Brazos" processor families.Signed-off-by: Clemens Ladisch
Cc: stable@kernel.org # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck
17 Feb, 2011
2 commits
-
On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers. In that case, all writes
through the corresponding sysfs files would be silently ignored.To prevent this, detect the locks and make the affected sysfs files
read-only.Signed-off-by: Clemens Ladisch
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck -
The documentation lists standard numbers and chip names in excruciating
detail, but that's all it does. To help mere mortals in deciding
whether to enable this driver, mention what this sensor is for and in
which systems it might be found.Also add a link to the actual JC 42.4 specification.
Signed-off-by: Clemens Ladisch
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck
19 Jan, 2011
1 commit
-
This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.Signed-off-by: Guenter Roeck
Acked-by: Jean Delvare
13 Jan, 2011
5 commits
-
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.Signed-off-by: Juerg Haefliger
Signed-off-by: Jean Delvare -
I had to look it up for one user, so we might as well store it in the
driver documentation.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck -
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck -
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck -
Trivial patch updating my email contact details due to change of
employer, and because I no longer have access to the previously used
domain.Unfortunately I also no longer have access to any ads7828 hardware, but
am happy to support/maintain the driver if others are able to test
changes.Signed-off-by: Steve Hardy
Signed-off-by: Jean Delvare
10 Jan, 2011
1 commit
-
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat
Signed-off-by: Roland Stigge
Signed-off-by: Guenter Roeck
09 Jan, 2011
3 commits
-
Signed-off-by: Urs Fleisch
Acked-by: Jonathan Cameron
Signed-off-by: Guenter Roeck -
The humidity attribute is already supported by the sht15 driver, and another
driver supporting it is about to be added. Make it official.Signed-off-by: Guenter Roeck
Acked-by: Jonathan Cameron
Acked-by: Jean Delvare -
Add attributes supported by various PMBus devices to hwmon sysfs ABI.
Signed-off-by: Guenter Roeck
19 Nov, 2010
1 commit
-
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.Signed-off-by: Hans J. Koch
Signed-off-by: Randy Dunlap
Signed-off-by: Linus Torvalds
29 Oct, 2010
3 commits
-
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.Signed-off-by: Jean Delvare
-
The ADT7468 supports a high-frequency PWM output mode where all PWM
outputs are driven by a 22.5 kHz clock. Add support for this mode, and
document it, as it may surprise the user that setting one PWM output
frequency also affects the other PWM outputs.Signed-off-by: Jean Delvare
Cc: Darrick J. Wong
Acked-by: Guenter Roeck -
Signed-off-by: Jean Delvare
Cc: Darrick J. Wong
Acked-by: Guenter Roeck