08 Nov, 2005
6 commits
-
From: Georg Chini
Signed-off-by: David S. Miller
-
From: Georg Chini
Introduce some sbus_dma routines similar to the
ebus_dma stuff to make the code look nearly the same
for both cases.Thanks to Christopher for testing.
Signed-off-by: David S. Miller
-
"extern inline" doesn't make much sense.
Signed-off-by: Adrian Bunk
Signed-off-by: Ralf Baechle
07 Nov, 2005
3 commits
-
This patch remoes an unneeded EXPORT_SYMBOL.
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Modules: ICE1712 driver
Fix the return value of ADC mux put callback in aureon.c.
Signed-off-by: Takashi Iwai
-
Signed-off-by: Jaroslav Kysela
04 Nov, 2005
31 commits
-
Modules: USB generic driver
Signed-off-by: Jaroslav Kysela
-
Modules: HDA Codec driver,HDA generic driver
- Make bound controls global to all patches
- Clean up analog patches (for the upcoming extension to AD1988)Signed-off-by: Takashi Iwai
-
Modules: HDA generic driver
Show the power state of each widget in proc file.
Signed-off-by: Takashi Iwai
-
Modules: ICE1712 driver
Added the SPDIF support to Shuttle SN25P.
Signed-off-by: Takashi Iwai
-
Modules: USB generic driver
If we submit all our URBs when a playback stream is started, the first
hwptr_done update for each URB happens at the same time. This results
in an underrun when there isn't enough PCM data available at this
point for all URBs.To avoid this, we begin submitting our URBs earlier (when the stream
is prepared), with empy packets. When the stream is started, the
prepare_playback_urb() call for each URB will be run only when the
respective URB has completed previously, so the first hwptr_done
updates will be done nicely staggered.Signed-off-by: Clemens Ladisch
Signed-off-by: Takashi Iwai -
Modules: AC97 Codec
Fixed the confliction of DRA and surround slots 7/8.
Signed-off-by: Takashi Iwai
-
Modules: Intel8x0 driver
- Request irq handler after proper initialization
- Don't override always buggy_irq option for NvidiaSigned-off-by: Takashi Iwai
-
Modules: MIPS AU1x00 driver
AMD Au1x00 ALSA driver fails compilation with the alternate spinlock
implementation because it doesn't do locking/unlocking correctly in some
places (passes spinlock by value).Signed-off-by: Konstantin Baydarov
Signed-off-by: Sergei Shtylyov
Signed-off-by: Takashi Iwai -
Modules: Intel8x0 driver
Add AC97_TUNE_HP_ONLY quirk for Dell Inspiron 8600.
Signed-off-by: Karoly Lorentey
Signed-off-by: Takashi Iwai -
Modules: AZT3328 driver
this is now an even much more reworked patch (#3) for my azt3328.c ALSA driver.
IOW I spent another 4 evenings to get the sequencer timer to work properly
(my head is still hurting) and do lots of other cleanups.Note that despite the extensive sequencer timer additions, the driver object
is still only 2kB bigger than the previous version, due to those many
optimizations...Changes in version #3:
- fully working ALSA sequencer timer support for the card's 1024000Hz
DirectX timer (downscaling adjustable via seqtimer_scaling module param)
- an insane amount of code optimizations
- many, many cleanupsChanges in version #2:
- FOUND the 1us DirectX timer area (yay!), made the code respect it
properly
- renamed some 'weird' mixer control names according to ControlNames.txt
- cleanup unneeded debug messages, reformatting
- improved I/O register documentation
- constified many more structsChanges in version #1:
- improves/fixes some fatal playback/recording interaction
- improves IRQ handler performance (and actually fixes some weird code)
- coalesces some I/O accesses
- slightly improves I/O interface documentation
- improves/fixes logging
- defines out some less important debug code
- constifies some dataSigned-off-by: Andreas Mohr
Signed-off-by: Takashi Iwai -
Modules: EMU10K1/EMU10K2 driver,Common EMU synth
This patch fixes problems with voices cutting off or not
sounding at all.Signed-off-by: Tim
Signed-off-by: Takashi Iwai -
Modules: ALSA Core
Fix a typo (bogus check) in the last patch to fix Oops with suspend/resume.
Signed-off-by: Takashi Iwai
-
Modules: HWDEP Midlevel,PCM Midlevel,RawMidi Midlevel,ALSA Core
Replace usage of CONFIG_SND_MAJOR with snd_major, where appropriate.
Signed-off-by: Clemens Ladisch
-
Modules: USB generic driver
Remove a superfluous include of the sound/minors.h header.
Signed-off-by: Clemens Ladisch
-
Modules: ALSA Core,ALSA Minor Numbers
Remove the unused and undefined symbols SNDRV_DEVICE_TYPE_{MIXER,
PCM_PLOOP,PCM_CLOOP}, and introduce a new symbol SNDRV_MINOR_GLOBAL
for non-card-specific devices like the sequencer or the timer.Signed-off-by: Clemens Ladisch
-
Modules: AD1889 driver,RME9652 driver
This is the sound/ part of the big kfree cleanup patch.
Remove pointless checks for NULL prior to calling kfree() in sound/.
Signed-off-by: Jesper Juhl
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai -
Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size. Also use
human-time conversion functions instead of hard-coded division to avoid
rounding issues.Signed-off-by: Nishanth Aravamudan
Signed-off-by: Andrew Morton
Signed-off-by: Takashi Iwai -
Modules: Intel8x0 driver
1.In intel8x0_measure_ac97_clock routine, when stop DMA, there is not stop
DMA corectly, but start another PCM In2 DMA engine.
2.In do_ali_reset routine, there is only need to enable PCM IN and PCM OUT.Signed-off-by: Jaroslav Kysela
-
Modules: CA0106 driver
Signed-off-by: James Courtier-Dutton
-
Modules: CA0106 driver
Just tidying up the code. Making more functions static.
Signed-off-by: James Courtier-Dutton
-
Modules: ALSA
-
Modules: PCI drivers,CA0106 driver
Author: Tilman Kranz
Signed-off-by: James Courtier-Dutton
-
Modules: RME HDSP driver
- Add missing KERN_* suffix to printk.
- Clean up parentheses.
- clean up the firmware check code.Signed-off-by: Takashi Iwai
-
Add missing KERN_* suffix to printk.
Signed-off-by: Takashi Iwai
-
Modules: Documentation,ALI5451 driver,NM256 driver
Removed multi-card supports for ali5451 and nm256 drivers.
They are supposed to be a single device.Signed-off-by: Takashi Iwai
-
Fix the type of enable module option to bool.
Signed-off-by: Takashi Iwai
-
Modules: NM256 driver
The current snd-nm256 driver can cause Dell Latitude CSx laptops to
lock-up during module (un)load. I have isolated this to the writes to
the control port register at offset 0x6cc which were not already
protected by the existing reset_workaround.I tried grouping these writes with the existing reset_workaround
clause, but that caused the driver to have (un)load problems on the
Dell Latitude LS laptops. So, I have implemented a reset_workaround_2
clause (please feel free to suggest a better name!) to cover this
situation and added a quirk entry for the CSx laptops.Signed-off-by: John W. Linville
Signed-off-by: Takashi Iwai -
Modules: YMFPCI driver
We better pretend that the ymfpci timer runs at 48 kHz because the
interrupt frequency cannot be higher, and clients that would try to
use 96 kHz would run at half their desired speed.Signed-off-by: Clemens Ladisch
-
Modules: ALSA sequencer
When no default timer frequency has been set, initialize_timer() just
uses the maximum frequency supported by the timer, which is ridiculously
high on 96 kHz timers.This patch introduces a default frequency of 1000 Hz for this case, and
makes sure that a frequency set by the user isn't too high.Signed-off-by: Clemens Ladisch
-
Modules: Maestro3 driver
This patch fixes the maestro3 driver to call the snd_m3_assp_init
function to write the DSP firmware into the ASSP chip before sending the
RUN_ASSP command, thereby solving the hang after a cold boot.Signed-off-by: Charles R. Anderson
Signed-off-by: Takashi Iwai -
Modules: Intel8x0 driver
- Set buggy_irq parameter before registration of irq handler.
- Clean up module parameter handling.Signed-off-by: Takashi Iwai
