05 Jan, 2013
7 commits
-
Signed-off-by: Stanislav Kinsbursky
Cc: "Eric W. Biederman"
Cc: James Morris
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Remove the redundant and confusing fill_copy(). Also add copy_msg()
check for error. In this case exit from the function have to be done
instead of break, because further code interprets any error as EAGAIN.Also define copy_msg() for the case when CONFIG_CHECKPOINT_RESTORE is
disabled.Signed-off-by: Stanislav Kinsbursky
Cc: "Eric W. Biederman"
Cc: James Morris
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This code works if CONFIG_CHECKPOINT_RESTORE is disabled.
[akpm@linux-foundation.org: remove __maybe_unused]
Signed-off-by: Stanislav Kinsbursky
Cc: "Eric W. Biederman"
Cc: James Morris
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Passing and checking of msgflg to free_copy() is redundant. This patch
sets copy to NULL on declaration instead and checks for non-NULL in
free_copy().Note: in case of copy allocation failure, error is returned immediately.
So no need to check for IS_ERR() in free_copy().Signed-off-by: Stanislav Kinsbursky
Cc: "Eric W. Biederman"
Cc: James Morris
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch is required for checkpoint/restore in userspace.
c/r requires some way to get all pending IPC messages without deleting
them from the queue (checkpoint can fail and in this case tasks will be
resumed, so queue have to be valid).To achive this, new operation flag MSG_COPY for sys_msgrcv() system call
was introduced. If this flag was specified, then mtype is interpreted as
number of the message to copy.If MSG_COPY is set, then kernel will allocate dummy message with passed
size, and then use new copy_msg() helper function to copy desired message
(instead of unlinking it from the queue).Notes:
1) Return -ENOSYS if MSG_COPY is specified, but
CONFIG_CHECKPOINT_RESTORE is not set.Signed-off-by: Stanislav Kinsbursky
Cc: Serge Hallyn
Cc: "Eric W. Biederman"
Cc: Pavel Emelyanov
Cc: Al Viro
Cc: KOSAKI Motohiro
Cc: Michael Kerrisk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Move all message related manipulation into one function msg_fill().
Actually, two functions because of the compat one.[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stanislav Kinsbursky
Cc: Serge Hallyn
Cc: "Eric W. Biederman"
Cc: Pavel Emelyanov
Cc: Al Viro
Cc: KOSAKI Motohiro
Cc: Michael Kerrisk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a cleanup patch. The assignment is redundant.
Signed-off-by: Stanislav Kinsbursky
Cc: Serge Hallyn
Cc: "Eric W. Biederman"
Cc: Pavel Emelyanov
Cc: Al Viro
Cc: KOSAKI Motohiro
Cc: Michael Kerrisk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
07 Sep, 2012
1 commit
-
- Store the ipc owner and creator with a kuid
- Store the ipc group and the crators group with a kgid.
- Add error handling to ipc_update_perms, allowing it to
fail if the uids and gids can not be converted to kuids
or kgids.
- Modify the proc files to display the ipc creator and
owner in the user namespace of the opener of the proc file.Signed-off-by: Eric W. Biederman
31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
24 Mar, 2011
1 commit
-
CAP_IPC_OWNER and CAP_IPC_LOCK can be checked against current_user_ns(),
because the resource comes from current's own ipc namespace.setuid/setgid are to uids in own namespace, so again checks can be against
current_user_ns().Changelog:
Jan 11: Use task_ns_capable() in place of sched_capable().
Jan 11: Use nsown_capable() as suggested by Bastian Blank.
Jan 11: Clarify (hopefully) some logic in futex and sched.c
Feb 15: use ns_capable for ipc, not nsown_capable
Feb 23: let copy_ipcs handle setting ipc_ns->user_ns
Feb 23: pass ns down rather than taking it from current[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge E. Hallyn
Acked-by: "Eric W. Biederman"
Acked-by: Daniel Lezcano
Acked-by: David Howells
Cc: James Morris
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 May, 2010
1 commit
-
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan
Acked-by: WANG Cong
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
30 Mar, 2010
1 commit
-
…it slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
16 Dec, 2009
1 commit
-
We have apparently had a memory leak since
7ca7e564e049d8b350ec9d958ff25eaa24226352 "ipc: store ipcs into IDRs" in
2007. The idr of which 3 exist for each ipc namespace is never freed.This patch simply frees them when the ipcns is freed. I don't believe any
idr_remove() are done from rcu (and could therefore be delayed until after
this idr_destroy()), so the patch should be safe. Some quick testing
showed no harm, and the memory leak fixed.Caught by kmemleak.
Signed-off-by: Serge E. Hallyn
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
04 Dec, 2009
1 commit
-
Commit a0d092f introduced the following warning:
ipc/msg.c: In function ?msgctl_down?:
ipc/msg.c:415: warning: ?msqid64? may be used uninitialized in this functionThe gcc warning in this case is actually bogus, as msqid64 is touched only
iff cmd == IPC_SET, and in such case, copy_msqid_from_user() initializes
it properly.Signed-off-by: Felipe Contreras
Signed-off-by: Jiri Kosina
14 Jan, 2009
1 commit
-
Signed-off-by: Heiko Carstens
07 Jun, 2008
1 commit
-
When posting:
[PATCH 1/8] Scaling msgmni to the amount of lowmem
(see http://lkml.org/lkml/2008/2/11/171), I have added a KERN_INFO message
that is output each time msgmni is recomputed.In http://lkml.org/lkml/2008/4/29/575 Tony Luck complained that this
message references an ipc namespace address that is useless.I first thought of using an audit_log instead of a printk, as suggested by
Serge Hallyn. But unfortunately, we do not have any other information
than the namespace address to provide here too. So I chose to move the
message and output it only at boot time, removing the reference to the
namespace.Signed-off-by: Nadia Derbey
Cc: Pierre Peiffer
Cc: Manfred Spraul
Acked-by: Tony Luck
Cc: "Serge E. Hallyn"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
29 Apr, 2008
9 commits
-
Add definitions of USHORT_MAX and others into kernel. ipc uses it and slub
implementation might also use it.[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Zhang Yanmin
Reviewed-by: Christoph Lameter
Cc: Nadia Derbey
Cc: "Pierre Peiffer"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
semctl_down(), msgctl_down() and shmctl_down() are used to handle the same set
of commands for each kind of IPC. They all start to do the same job (they
retrieve the ipc and do some permission checks) before handling the commands
on their own.This patch proposes to consolidate this by moving these same pieces of code
into one common function called ipcctl_pre_down().It simplifies a little these xxxctl_down() functions and increases a little
the maintainability.Signed-off-by: Pierre Peiffer
Acked-by: Serge Hallyn
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The IPC_SET command performs the same permission setting for all IPCs. This
patch introduces a common ipc_update_perm() function to update these
permissions and makes use of it for all IPCs.Signed-off-by: Pierre Peiffer
Acked-by: Serge Hallyn
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
All IPCs make use of an intermetiate *_setbuf structure to handle the IPC_SET
command. This is not really needed and, moreover, it complicates a little bit
the code.This patch gets rid of the use of it and uses directly the semid64_ds/
msgid64_ds/shmid64_ds structure.In addition of removing one struture declaration, it also simplifies and
improves a little bit the common 64-bits path.Signed-off-by: Pierre Peiffer
Acked-by: Serge Hallyn
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Currently, sys_msgctl is not easy to read.
This patch tries to improve that by introducing the msgctl_down function to
handle all commands requiring the rwmutex to be taken in write mode (ie
IPC_SET and IPC_RMID for now). It is the equivalent function of semctl_down
for message queues.This greatly changes the readability of sys_msgctl and also harmonizes the way
these commands are handled among all IPCs.Signed-off-by: Pierre Peiffer
Acked-by: Serge Hallyn
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Introduce the registration of a callback routine that recomputes msg_ctlmni
upon memory add / remove.A single notifier block is registered in the hotplug memory chain for all the
ipc namespaces.Since the ipc namespaces are not linked together, they have their own
notification chain: one notifier_block is defined per ipc namespace.Each time an ipc namespace is created (removed) it registers (unregisters) its
notifier block in (from) the ipcns chain. The callback routine registered in
the memory chain invokes the ipcns notifier chain with the IPCNS_LOWMEM event.
Each callback routine registered in the ipcns namespace, in turn, recomputes
msgmni for the owning namespace.Signed-off-by: Nadia Derbey
Cc: Yasunori Goto
Cc: Matt Helsley
Cc: Mingming Cao
Cc: Pierre Peiffer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Since all the namespaces see the same amount of memory (the total one) this
patch introduces a new variable that counts the ipc namespaces and divides
msg_ctlmni by this counter.Signed-off-by: Nadia Derbey
Cc: Yasunori Goto
Cc: Matt Helsley
Cc: Mingming Cao
Cc: Pierre Peiffer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
On large systems we'd like to allow a larger number of message queues. In
some cases up to 32K. However simply setting MSGMNI to a larger value may
cause problems for smaller systems.The first patch of this series introduces a default maximum number of message
queue ids that scales with the amount of lowmem.Since msgmni is per namespace and there is no amount of memory dedicated to
each namespace so far, the second patch of this series scales msgmni to the
number of ipc namespaces too.Since msgmni depends on the amount of memory, it becomes necessary to
recompute it upon memory add/remove. In the 4th patch, memory hotplug
management is added: a notifier block is registered into the memory hotplug
notifier chain for the ipc subsystem. Since the ipc namespaces are not linked
together, they have their own notification chain: one notifier_block is
defined per ipc namespace. Each time an ipc namespace is created (removed) it
registers (unregisters) its notifier block in (from) the ipcns chain. The
callback routine registered in the memory chain invokes the ipcns notifier
chain with the IPCNS_MEMCHANGE event. Each callback routine registered in the
ipcns namespace, in turn, recomputes msgmni for the owning namespace.The 5th patch makes it possible to keep the memory hotplug notifier chain's
lock for a lesser amount of time: instead of directly notifying the ipcns
notifier chain upon memory add/remove, a work item is added to the global
workqueue. When activated, this work item is the one who notifies the ipcns
notifier chain.Since msgmni depends on the number of ipc namespaces, it becomes necessary to
recompute it upon ipc namespace creation / removal. The 6th patch uses the
ipc namespace notifier chain for that purpose: that chain is notified each
time an ipc namespace is created or removed. This makes it possible to
recompute msgmni for all the namespaces each time one of them is created or
removed.When msgmni is explicitely set from userspace, we should avoid recomputing it
upon memory add/remove or ipcns creation/removal. This is what the 7th patch
does: it simply unregisters the ipcns callback routine as soon as msgmni has
been changed from procfs or sysctl().Even if msgmni is set by hand, it should be possible to make it back
automatically recomputed upon memory add/remove or ipcns creation/removal.
This what is achieved in patch 8: if set to a negative value, msgmni is added
back to the ipcns notifier chain, making it automatically recomputed again.This patch:
Compute msg_ctlmni to make it scale with the amount of lowmem. msg_ctlmni is
now set to make the message queues occupy 1/32 of the available lowmem.Some cleaning has also been done for the MSGPOOL constant: the msgctl man page
says it's not used, but it also defines it as a size in bytes (the code
expresses it in Kbytes).Signed-off-by: Nadia Derbey
Cc: Yasunori Goto
Cc: Matt Helsley
Cc: Mingming Cao
Cc: Pierre Peiffer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
By continuing to consolidate a little the IPC code, each id can be built
directly in ipc_addid() instead of having it built from each callers of
ipc_addid()And I also remove shm_addid() in order to have, as much as possible, the
same code for shm/sem/msg.[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pierre Peiffer
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Feb, 2008
3 commits
-
sem_exit_ns(), msg_exit_ns() and shm_exit_ns() are all called when an
ipc_namespace is released to free all ipcs of each type. But in fact, they
do the same thing: they loop around all ipcs to free them individually by
calling a specific routine.This patch proposes to consolidate this by introducing a common function,
free_ipcs(), that do the job. The specific routine to call on each
individual ipcs is passed as parameter. For this, these ipc-specific
'free' routines are reworked to take a generic 'struct ipc_perm' as
parameter.Signed-off-by: Pierre Peiffer
Cc: Cedric Le Goater
Cc: Pavel Emelyanov
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Each ipc_namespace contains a table of 3 pointers to struct ipc_ids (3 for
msg, sem and shm, structure used to store all ipcs) These 'struct ipc_ids'
are dynamically allocated for each icp_namespace as the ipc_namespace
itself (for the init namespace, they are initialized with pointers to
static variables instead)It is so for historical reason: in fact, before the use of idr to store the
ipcs, the ipcs were stored in tables of variable length, depending of the
maximum number of ipc allowed. Now, these 'struct ipc_ids' have a fixed
size. As they are allocated in any cases for each new ipc_namespace, there
is no gain of memory in having them allocated separately of the struct
ipc_namespace.This patch proposes to make this table static in the struct ipc_namespace.
Thus, we can allocate all in once and get rid of all the code needed to
allocate and free these ipc_ids separately.Signed-off-by: Pierre Peiffer
Acked-by: Cedric Le Goater
Cc: Pavel Emelyanov
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Currently the IPC namespace management code is spread over the ipc/*.c files.
I moved this code into ipc/namespace.c file which is compiled out when needed.The linux/ipc_namespace.h file is used to store the prototypes of the
functions in namespace.c and the stubs for NAMESPACES=n case. This is done
so, because the stub for copy_ipc_namespace requires the knowledge of the
CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in
included into many many .c files via the sys.h->sem.h sequence so adding the
sched.h into it will make all these .c depend on sched.h which is not that
good. On the other hand the knowledge about the namespaces stuff is required
in 4 .c files only.Besides, this patch compiles out some auxiliary functions from ipc/sem.c,
msg.c and shm.c files. It turned out that moving these functions into
namespaces.c is not that easy because they use many other calls and macros
from the original file. Moving them would make this patch complicated. On
the other hand all these functions can be consolidated, so I will send a
separate patch doing this a bit later.Signed-off-by: Pavel Emelyanov
Acked-by: Serge Hallyn
Cc: Cedric Le Goater
Cc: "Eric W. Biederman"
Cc: Herbert Poetzl
Cc: Kirill Korotaev
Cc: Sukadev Bhattiprolu
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
07 Feb, 2008
1 commit
-
In the new implementation of the [sem|shm|msg]_lock[_check]() routines, we
use the return value of ipc_lock() in container_of() without any check.
But ipc_lock may return a errcode. The use of this errcode in
container_of() may alter this errcode, and we don't want this.And in xxx_exit_ns, the pointer return by idr_find is of type 'struct
kern_ipc_per'...Today, the code will work as is because the member used in these
container_of() is the first member of its container (offset == 0), the
errcode isn't changed then. But in the general case, we can't count on
this assumption and this may lead later to a real bug if we don't correct
this.Again, the proposed solution is simple and correct. But, as pointed by
Nadia, with this solution, the same check will be done several times (in
all sub-callers...), what is not very funny/optimal...Signed-off-by: Pierre Peiffer
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
20 Oct, 2007
10 commits
-
With the use of idr to store the ipc, the case where the idr cache is
empty, when idr_get_new is called (this may happen even if we call
idr_pre_get() before), is not well handled: it lets
semget()/shmget()/msgget() return ENOSPC when this cache is empty, what 1.
does not reflect the facts and 2. does not conform to the man(s).This patch fixes this by retrying the whole process of allocation in this case.
Signed-off-by: Pierre Peiffer
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Virtualization of sysv msg queues is incomplete: msg_hdrs and msg_bytes
variables visible from userspace are global. Let's make them
per-namespace.Signed-off-by: Alexey Kuznetsov
Signed-off-by: Kirill Korotaev
Cc: Pierre Peiffer
Cc: Nadia Derbey
Cc: Serge Hallyn
Acked-by: "Eric W. Biederman"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Remvoe the unneeded parameters from ipc_checkid() and ipc_buildid()
interfaces.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a patch that fixes the way idr_find() used to be called in ipc_lock():
in all the paths that don't imply an update of the ipcs idr, it was called
without the idr tree being locked.The changes are:
. in ipc_ids, the mutex has been changed into a reader/writer semaphore.
. ipc_lock() now takes the mutex as a reader during the idr_find().
. a new routine ipc_lock_down() has been defined: it doesn't take the
mutex, assuming that it is being held by the caller. This is the routine
that is now called in all the update paths.Signed-off-by: Nadia Derbey
Acked-by: Jarek Poplawski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch fixes the wrong / obsolete comments in the ipc code. Also adds
a missing lock around ipc_get_maxid() in shm_get_stat().Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch converts casts of struct kern_ipc_perm to
. struct msg_queue
. struct sem_array
. struct shmid_kernel
into the equivalent container_of() macro. It improves code maintenance
because the code need not change if kern_ipc_perm is no longer at the
beginning of the containing struct.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch introduces a new ipc_lock_check() routine interface:
. each time ipc_checkid() is called, this is done after calling ipc_lock().
ipc_checkid() is now called from inside ipc_lock_check().[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix RCU locking]
Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch introduces a change into the sys_msgget(), sys_semget() and
sys_shmget() routines: they now share a common code, which is better for
maintainability.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch introduces ipcs storage into IDRs. The main changes are:
. This ipc_ids structure is changed: the entries array is changed into a
root idr structure.
. The grow_ary() routine is removed: it is not needed anymore when adding
an ipc structure, since we are now using the IDR facility.
. The ipc_rmid() routine interface is changed:
. there is no need for this routine to return the pointer passed in as
argument: it is now declared as a void
. since the id is now part of the kern_ipc_perm structure, no need to
have it as an argument to the routineSigned-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.The idea is:
- all in-kernel data structures must store either struct pid itself
or the pid's global nr, obtained with pid_nr() call;
- when seeking the task from kernel code with the stored id one
should use find_task_by_pid() call that works with global pids;
- when showing pid's numerical value to the user the virtual one
should be used, but however when one shows task's pid outside this
task's namespace the global one is to be used;
- when getting the pid from userspace one need to consider this as
the virtual one and use appropriate task/pid-searching functions.[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov
Signed-off-by: Alexey Dobriyan
Cc: Sukadev Bhattiprolu
Cc: Oleg Nesterov
Cc: Paul Menage
Cc: "Eric W. Biederman"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
18 Jul, 2007
1 commit
-
Mark variables with uninitialized_var() if such a warning appears,
and analysis proves that the var is initialized properly on all paths
it is used.Signed-off-by: Jeff Garzik
