20 Dec, 2012
2 commits
-
IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor
can be programmed to display the temperature reported on the PECI interface.If configured for Intel PECI, the driver reported the wrong sensor type for
the respective thermal sensor. Fix the code to correctly report it as
"Intel PECI (6)".Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare -
Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare
14 Dec, 2012
2 commits
-
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
... -
Pull ARM SoC driver specific changes from Olof Johansson:
"A collection of mostly SoC-specific driver updates:
- a handful of pincontrol and setup changes
- new drivers for hwmon and reset controller for vexpress
- timing support updates for OMAP (gpmc and other interfaces)
- plus a collection of smaller cleanups"* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: ux500: fix pin warning
ARM: OMAP2+: tusb6010: generic timing calculation
ARM: OMAP2+: smc91x: generic timing calculation
ARM: OMAP2+: onenand: generic timing calculation
ARM: OMAP2+: gpmc: generic timing calculation
ARM: OMAP2+: gpmc: handle additional timings
ARM: OMAP2+: nand: remove redundant rounding
gpio: samsung: use pr_* instead of printk
ARM: ux500: fixup magnetometer pins
ARM: ux500: add STM pin configuration
ARM: ux500: 8500: add pinctrl support for uart1 and uart2
ARM: ux500: cosmetic fixups for uart0
gpio: samsung: Fix input mode setting function for GPIO int
ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
ARM: ux500: 8500: define SDI sleep states
ARM: vexpress: Reset driver
ARM: ux500: 8500: update SKE keypad pinctrl table
hwmon: Versatile Express hwmon driver
ARM: ux500: delete duplicate macro
ARM: ux500: 8500: add IDLE pin configuration for SPI
...
06 Dec, 2012
4 commits
-
This is the HWMON patch for DA9055 PMIC and has got dependency on the
DA9055 MFD core.This patch monitors the DA9055 PMIC's ADC channels vddout, junction temperature
and auxiliary channels.This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: David Dajun Chen
Signed-off-by: Ashish Jangam
[Guenter Roeck: Dropped __devinit, __devexit, __devexit_p]
Signed-off-by: Guenter Roeck -
as per processor data sheets.
Signed-off-by: Guenter Roeck
Acked-by: Jean Delvare -
The ADS7830 device is almost the same as the ADS7828,
except that it does 8-bit sampling, instead of 12-bit.
This patch extends the ads7828 driver to support this chip.Signed-off-by: Guillaume Roguez
Signed-off-by: Vivien Didelot
Signed-off-by: Guenter Roeck -
As there is no reliable way to identify the chip, it is preferable to
remove the detect callback, to avoid misdetection.Module parameters are not worth it here, so let's get rid of them and
add an ads7828_platform_data structure instead.Clean the code by removing unused macros, fixing coding style issues,
avoiding function prototypes and using convenient macros such as
module_i2c_driver().Signed-off-by: Vivien Didelot
Signed-off-by: Guenter Roeck
19 Nov, 2012
1 commit
-
Signed-off-by: Masanari Iida
Signed-off-by: Jiri Kosina
16 Nov, 2012
1 commit
-
Needed for the omap timer changes.
Signed-off-by: Arnd Bergmann
30 Oct, 2012
1 commit
-
Signed-off-by: Andreas Herrmann
Signed-off-by: Guenter Roeck
26 Oct, 2012
1 commit
-
Versatile Express changes from Pawel Moll :
* 'vexpress-drivers' of git://git.linaro.org/people/pawelmoll/linux:
ARM: vexpress: Reset driver
hwmon: Versatile Express hwmon driverSigned-off-by: Arnd Bergmann
17 Oct, 2012
1 commit
-
hwmon framework driver for Versatile Express sensors, providing
information about board level voltage (only when regulator driver
is not configured), currents, temperature and power/energy usage.
Labels for the values can be defined as DT properties.Signed-off-by: Pawel Moll
Acked-by: Guenter Roeck
15 Oct, 2012
2 commits
-
TjMax for the CE4100 series of Atom CPUs was previously reported to be
110 degrees C.cpuinfo logs on the web show existing CPU types CE4110, CE4150, and CE4170,
reported as "model name : Intel(R) Atom(TM) CPU CE41{1|5|7}0 @ 1.{2|6}0GHz"
with model 28 (0x1c) and stepping 10 (0x0a). Add the three known variants
to the tjmax table.Signed-off-by: Guenter Roeck
cc: stable@vger.kernel.org
Acked-by: Jean Delvare -
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.CC: Jean Delvare
CC: Guenter Roeck
CC: Rob Landley
Signed-off-by: Kees Cook
Signed-off-by: Guenter Roeck
13 Oct, 2012
1 commit
-
Pull ACPI & Thermal updates from Len Brown:
"The generic Linux thermal layer is gaining some new capabilities
(generic cooling via cpufreq) and some new customers (ARM).Also, an ACPI EC bug fix plus a regression fix."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits)
tools/power/acpi/acpidump: remove duplicated include from acpidump.c
ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug
cpuidle / ACPI: fix potential NULL pointer dereference
ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop
ACPI: EC: Make the GPE storm threshold a module parameter
thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal()
Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem.
thermal: exynos: Use devm_* functions
ARM: exynos: add thermal sensor driver platform data support
thermal: exynos: register the tmu sensor with the kernel thermal layer
thermal: exynos5: add exynos5250 thermal sensor driver support
hwmon: exynos4: move thermal sensor driver to driver/thermal directory
thermal: add generic cpufreq cooling implementation
Fix a build error.
thermal: Fix potential NULL pointer accesses
thermal: add Renesas R-Car thermal sensor support
thermal: fix potential out-of-bounds memory access
Thermal: Introduce locking for cdev.thermal_instances list.
Thermal: Unify the code for both active and passive cooling
Thermal: Introduce simple arbitrator for setting device cooling state
...
10 Oct, 2012
2 commits
-
Signed-off-by: Peter Meerwald
Signed-off-by: Jean Delvare -
My name was change after migration.
Signed-off-by: Oleksij Rempel
Signed-off-by: Jean Delvare
09 Oct, 2012
1 commit
-
Conflicts:
drivers/staging/omap-thermal/omap-thermal-common.
OMAP supplied dummy TC1 and TC2,
at the same time that the thermal tree removed them
from thermal_zone_device_register()drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
propogate the upstream MAX_IDR_LEVEL re-name
to prevent a build failurePreviously-fixed-by: Stephen Rothwell
Signed-off-by: Len Brown
24 Sep, 2012
7 commits
-
This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c. The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.Signed-off-by: Amit Daniel Kachhap
Acked-by: Guenter Roeck
Cc: SangWook Ju
Cc: Durgadoss
Cc: Len Brown
Cc: Jean Delvare
Cc: Kyungmin Park
Cc: Kukjin Kim
Signed-off-by: Andrew Morton
Signed-off-by: Amit Daniel Kachhap
Signed-off-by: Zhang Rui -
This Patch adds support for mcp3221 chip to the
mcp3021 driver.Signed-off-by: Sven Schuchmann
Signed-off-by: Guenter Roeck -
INA220 is register compatible to INA219, and INA230 is register compatible to
INA226, so all we need to do is to add name aliases for those two chips.Cc: Lothar Felten
Signed-off-by: Guenter Roeck
Reviewed-by: Jean Delvare -
Add support for LM74 and LM71 to LM70 driver.
Signed-off-by: Christophe Leroy
Signed-off-by: Guenter Roeck -
Removing the 3wire limitation on LM70 as the component also allows
operation on 4wire SPI busSigned-off-by: Christophe Leroy
Signed-off-by: Guenter Roeck -
The MAX197 is an A/D converter, made by Maxim. This driver currently
supports the MAX197, and MAX199. They are both 8-Channel, Multi-Range,
5V, 12-Bit DAS with 8+4 Bus Interface and Fault Protection.The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to
10V, while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199.Signed-off-by: Vivien Didelot
Signed-off-by: Guenter Roeck -
This patch brings basic support for the Analog Devices ADT7410 temperature
sensor. The following functionality has been implemented:* get current temperature
* get/set minimum, maximum and critical temperature
* get/set hysteresis
* get alarm events for minimum, maximum and critical temperatureAll implemented sysfs attributes have been sucessfully tested at temperatures
of 15°C to 40°C.Signed-off-by: Hartmut Knaack
Signed-off-by: Guenter Roeck
22 Jul, 2012
3 commits
-
This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor.
The driver is based on the existing Sensiron sht21 driver with the necessary changes
to the probe, update_measurements and conversion functions necessary to use the
Honeywell sensors.There's no difference between the 6130 & 6131 other than the 6131 having an external
condensation filter attached.Signed-off-by: Iain Paton
Signed-off-by: Guenter Roeck -
devres functions are the preferred means to allocate resources in hwmon drivers.
Document it.Signed-off-by: Guenter Roeck
Acked-by: Jean Delvare -
The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits
resolution and 10 channels.This patch monitors the DA9052 PMIC's ADC channels mostly for battery
parameters like battery temperature, junction temperature, battery
current etc.This patch is functionally tested on Samsung SMDKV6410
Signed-off-by: David Dajun Chen
Signed-off-by: Ashish Jangam
[Guenter Roeck: __init --> __devinit for probe function]
Signed-off-by: Guenter Roeck
18 Jun, 2012
3 commits
-
Tjmax values from Intel datasheets.
Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare -
Document the Atom series D2000 and N2000 (Cedar Trail) as being supported.
List and set TjMax for those series.Cc: Fenghua Yu
Cc: "R, Durgadoss"
Signed-off-by: Guenter Roeck
Signed-off-by: Jean Delvare -
Document the new Atom series (Tunnel Creek and Medfield) as being
supported, and list TjMax for the Atom E600 series.Also enable the Atom tjmax heuristic for these Atom CPU models.
Signed-off-by: Jean Delvare
Reviewed-by: Guenter Roeck
Cc: Alexander Stein
Cc: Fenghua Yu
Cc: "R, Durgadoss"
24 May, 2012
1 commit
-
Pull hwmon updates from Guenter Roeck:
"New driver for INA219 and INA226, added support for IT8782F and
IT8783E/F to it87 driver, plus cleanups in a couple of drivers."* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (it87) Make temp3 attribute conditional for IT8782F
hwmon: (it87) Convert to use devm_kzalloc and devm_request_region
hwmon: INA219 and INA226 support
hwmon: (it87) Create voltage attributes only if voltage is enabled
hwmon: (ntc_thermistor) Fix checkpatch warning
hwmon: (ntc_thermistor) Optimize and fix build warning
hwmon: (ntc_thermistor) Return error code from hwmon_device_register
hwmon: (ntc_thermistor) Convert to devm_kzalloc
hwmon: (ad7314) Remove unused defines, and rename OFFSET to SHIFT
acpi_power_meter: clean up code around setup_attrs
acpi_power_meter: drop meter_rw_attrs, use common meter_attrs
acpi_power_meter: remove duplicate code between register_{ro,rw}_attrs
acpi_power_meter: use a {RW,RO}_SENSOR_TEMPLATE macro to clean things up
acpi_power_meter: use the same struct {rw,ro}_sensor_template for both
hwmon: use module_pci_driver
hwmon: (it87) Add support for IT8782F and IT8783E/F
22 May, 2012
1 commit
-
Add support for the Texas Instruments INA219 and INA226 power monitors.
Signed-off-by: Lothar Felten
[guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data;
select PGA=8 for INA219]
Signed-off-by: Guenter Roeck
21 May, 2012
1 commit
-
Signed-off-by: Guenter Roeck
Acked-by: Jean Delvare
16 Apr, 2012
1 commit
-
Correct multiple spelling typo in Documentation.
Signed-off-by: Masanari Iida
Acked-by: Rob Landley
Reported-by: Anders Larsen
Signed-off-by: Jiri Kosina
09 Apr, 2012
1 commit
-
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.Conflicts:
drivers/net/ethernet/realtek/r8169.c
06 Apr, 2012
1 commit
-
Signed-off-by: Thomas Weber
Signed-off-by: Jiri Kosina
02 Apr, 2012
1 commit
-
The on-chip northbridge's temperature sensor of the upcoming
AMD Trinity CPUs works the same as for the previous CPUs.
Since it has a different PCI-ID, we just add the new one to the list
supported by k10temp.
This allows to use the k10temp driver on those CPUs.Signed-off-by: Andre Przywara
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck
23 Mar, 2012
1 commit
-
Add I2C driver for MCP3021 that is an ADC chip from Microchip.
The MCP3021 is a successive approximation A/D converter (ADC)
with 10-bit resolution.
The driver export the value of Vin to sysfs, the voltage unit is
mV. Through the sysfs interface, lm-sensors tool can also display
Vin voltage.Signed-off-by: Mingkai Hu
Signed-off-by: Xie Xiaobo
Signed-off-by: Jean Delvare
