22 Oct, 2005
33 commits
-
PA20 arch book (page 7-52 and 7-55) indicate a "sync" is required after
the FDC "to enforce instruction ordering". And we want to make
sure FIC is executed after FDC has retired.Signed-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
minor cleanup: qualify constant with "UL"
Acked-by: "Hmamouche, Youssef"
Signed-off-by: Grant GrundlerSigned-off-by: Kyle McMartin
-
2.6.12-rc4-pa3 s/__LP64__/CONFIG_64BIT/ and fixup config.h usage
Signed-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet.
Main advantage is it allows use of msleep() in the led_LCD_driver to
"atomically" perform two MMIO writes (CMD, then DATA).
Lead to nice cleanup of the main led_work_func() and led_LCD_driver().
Kudos to David for being persistent.From: David Pye
Signed-off-by: Grant GrundlerSigned-off-by: Kyle McMartin
-
add syscall entries for ioprio_set/get as per Jens Axboe.
Signed-off-by: Jens Axboe
Signed-off-by: Grant GrundlerSigned-off-by: Kyle McMartin
-
Optimize ext2_find_next_zero_bit. Gives about 25% perf improvement with a
rsync test with ext3.Signed-off-by: Randolph Chung
fix ext3 performance - ext2_find_next_zero() was culprit.
Kudos to jejb for pointing out the the possibility that ext2_test_bit
and ext2_find_next_zero() may in fact not be enumerating bits in
the bitmap because of endianess. Took sparc64 implementation and
adapted it to our tree. I suspect the real problem is ffz() wants
an unsigned long and was getting garbage in the top half of the
unsigned int. Not confirmed but that's what I suspect.Signed-off-by: Grant Grundler
Fix find_next_bit for 32-bit
Make masking consistent for bitopsFrom: Joel Soete
Signed-off-by: Randolph ChungAdd back incorrectly removed ext2_find_first_zero_bit definition
Signed-off-by: James Bottomley
Fixup bitops.h to use volatile for *_bit() ops
Based on this email thread:
http://marc.theaimsgroup.com/?t=108826637900003In a nutshell:
*_bit() want use of volatile.
__*_bit() are "relaxed" and don't use spinlock or volatile.other minor changes:
o replaces hweight64() macro with alias to generic_hweight64() (Joel Soete)
o cleanup ext2* macros so (a) it's obvious what the XOR magic is about
and (b) one version that works for both 32/64-bit.
o replace 2 uses of CONFIG_64BIT with __LP64__. bitops.h used both.
I think header files that might go to user space should use
something userspace will know about (__LP64__).Signed-off-by: Grant Grundler
Move SHIFT_PER_LONG to standard location for BITS_PER_LONG (asm/types.h)
and ditch the second definition of BITS_PER_LONG in bitops.hSigned-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
update comment about CAFL_STRIDE
Signed-off-by: Kyle McMartin
Fixed a bug in parisc_setup_cache_timing() which caused it to calculate
a poor value for parisc_cache_flush_threshold.Thanks to Joel Soete for spotting the bug.
Thanks to James Bottomley for pointing out the clean way to fix this.Signed-off-by: Stuart Brady
Signed-off-by: Kyle McMartin
-
Add support for changing unaligned trap behaviour on a
per-thread basis.Signed-off-by: Kyle McMartin
-
convert some bl calls to b,l or bv to use longer offsets
Signed-off-by: Randolph Chung
Signed-off-by: Kyle McMartin
-
o Added a control for the input source (which can be either
"line" or "mic")o Mute the speaker/line-out/headphone outputs by default.
o Increased the buffer size from 10 pages to 16.
Signed-off-by: Stuart Brady
ALSA Harmony was resetting the capture position when
preparing the capture substream, which it shouldn't do.
This should fix the problem.Signed-off-by: Stuart Brady
ALSA Harmony should no longer play junk (left in the buffers
from a previous stream) at the start of a new stream.Implement the monitor mixer channel for ALSA Harmony.
Also prevent snd_harmony_volume_get from returning negative values.
Signed-off-by: Stuart Brady
Use the graveyard/silence buffers in ALSA Harmony.
Signed-off-by: Stuart Brady
Signed-off-by: Kyle McMartin
-
export profile_pc() symbol - oprofile needs it when built as a module.
Signed-off-by: Grant Grundler
Take into account nullified insn and lock functions for profiling
This is needed at the end of functions; it is typical that the return
branch nullifies the next insn, which is in the next function. This
causes profiling data to show up against the "wrong" function.We also count lock times against the locker. This is consistent with
other architectures.Signed-off-by: Randolph Chung
Signed-off-by: Kyle McMartin
-
Fix some whitespace issues
Reorganise parisc_device probe routine to be a little less convoluted
Use ->hpa.start instead of ->hpaSigned-off-by: Matthew Wilcox
Signed-off-by: Kyle McMartin
-
Neaten up the CONFIG_PA20 ifdefs
More merge fixes, this time for SMP
Signed-off-by: Matthew Wilcox
Prettify the CONFIG_DEBUG_SPINLOCK __SPIN_LOCK_UNLOCKED initializers.
Clean up some warnings with CONFIG_DEBUG_SPINLOCK enabled.
Fix build with spinlock debugging turned on. Patch is cleaner like this,
too.Remove mandatory 16-byte alignment requirement on PA2.0 processors by
using the ldcw,CO completer. Provides a nice insn savings.Signed-off-by: Kyle McMartin
-
move pa_tlb_lock and it's primary consumers to tlb_flush.h
Future step will be to move spinlock_t definition out of system.h.Signed-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
2.6.12-rc4-pa3 : first pass at making sure use of RFI conforms to
PA 2.0 arch pages F-4 and F-5, PA 1.1 Arch page 3-19 and 3-20.The discussion revolves around all the rules for clearing PSW Q-bit.
The hard part is meeting all the rules for "relied upon translation"..align directive is used to guarantee the critical sequence ends more than
8 instructions (32 bytes) from the end of page.Signed-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
add || STI_CONSOLE to some of the basic FONTs. May need to get at
least one of them to default to "Y" for parisc.Signed-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
Fix card-mode Dino crashes on 725 (and probably other Snake) systems.
Dino was coming up in fatal mode after a warm reboot. Resetting Dino
brings it out of fatal mode, so do that if the status register indicates
we're in fatal mode. Since this was never observed on any later systems,
I presume firmware does this for us on those.Signed-off-by: Matthew Wilcox
Add debug statements in the cfg_read and cfg_write functions
Fix debug statements from the IRQ overhaul last winter
Rename dino_driver_callback() to dino_probe()Signed-off-by: Matthew Wilcox
Signed-off-by: Kyle McMartin
-
revert use of %%sr0 in fdc asm.
Thanks to Joel Soete for pointing out this oversight.
Signed-off-by: Grant Grundler
2.6.14-rc2-pa3 fdc/lci should be %r0 instead 0 for index (PA 1.1 compliance)
From: Joel Soete
Signed-off-by: Grant GrundlerExplain why we need insert_resource() instead of request_resource().
Fundementally, this is more convoluted for ccio driver because of
o legacy (HP-PB) transperant bridges.
o support for MMIO behind card-mode Dino (PCI)
o support for above bridges without ccio in the boxSBA driver doesn't have to worry about those issues.
Signed-off-by: Grant Grundler
Use insert_resource instead of request_resource now that the subdevices
will already have their resources claimedSigned-off-by: Matthew Wilcox
re-enable use of "inline" for perf critical functions.
Signed-off-by: Grant Grundler
2.6.12-rc4-pa5 fix sign extension of MMIO range
Fixes the problem of claiming a range that is disabled on 64-bit kernel:
ccio_init_resource() claimed CCIO bus address space (ffffffff00000000,
ffffffffffffffff)
also removes use of __FILE__.
Tested on both 32 and 64-bit systems by Joel.From: Joel Soete
Signed-off-by: Grant Grundler2.6.12-rc1-pa7 incorrect BUG_ON in ccio
ccio-dma.c line 1317 was preventing K-class with 4GB RAM from booting.
Any ccio machine with >=2GB of RAM would have (incorrectly) triggered this.Signed-off-by: Grant Grundler
Convert to ioremap and __raw_read/write
Signed-off-by: Matthew Wilcox
Signed-off-by: Kyle McMartin
-
revert use of %%sr0 in fdc asm.
Thanks to Joel Soete for pointing out this oversight.Signed-off-by: Grant Grundler
2.6.14-rc2-pa3 move "sync" outside the main loop that fills IO Pdir.
Signed-off-by: Grant Grundler
remove explicit use of sr0 in fdc ops.
Thanks to Joel Soete for reminding me were I added those...Signed-off-by: Grant Grundler
2.6.14-rc2-pa2 - make SBA more anal about invalidating pdir entries
Previous code cleared the valid flag a pdir entry but it did NOT
guarantee this change was visible to the PDIR before writing
the PCOM register. Ie the SBA could pick up a stale entry if
the write happened to hit the SBA before the cacheline was flushed
from the cache.Long term, I think I want to make this a compile time flag.
Developement tree should enable anal pdir checking by default
and Debian can disable it with either a CONFIG option
or one-line patch. fdc/sync options can only negatively affect
performance though I haven't measure how much yet.
If someone can run netperf TCP_RR across gige and compare
-pa1 and -pa2, that would be sufficient.Cleaned up the use of "fdc" to make sure it's using "kernel"
space id (specify sr0 but maps to sr4-7). It seems a bit fragile
to assume "sr1" gets loaded with KERNEL_SPACE which is how the
code works today.Tested on 32 and 64-bit SMP kernels on j6k.
Signed-off-by: Grant Grundler
remove PDC_NARROW from SBA and document history of PDC_NARROW a bit.
It will still show up in an older kernel's .config file.Signed-off-by: Grant Grundler
if/ifdef cleanups from Joel Soete.
Signed-off-by: Grant Grundler
2.6.12-rc4-pa2 fix 32-bit support for Astro platforms
o Since my last SBA code change, SBA could allocate more than 1GB of IOVA
space on Astro boxes with more than 1GB of RAM when running 32-bit kernel.
This is bad since IOMMU can only talk to the first 1GB at most.
Kudos to jejb for quickly spotting that bug.o jejb also noted SBA should *always* reject DMA masks > 32-bits since
DMA-mapping.txt indicates caller should try again with 32-bits.o off-by-one error when comparing the mask to IOVA space size.
Signed-off-by: Grant Grundler
Signed-off-by: Kyle McMartin
-
Convert pa_dev->hpa from an unsigned long to a struct resource.
Signed-off-by: Matthew Wilcox
Fix up users of ->hpa to use ->hpa.start instead.
Signed-off-by: Matthew Wilcox
Signed-off-by: Kyle McMartin
-
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver
names.Signed-off-by: Matthew Wilcox
Signed-off-by: Kyle McMartin
-
Fix parse_tree_node. much more needs to be done to fix this file.
Signed-off-by: Matthew Wilcox
Make drivers.c compile based on a patch from Pat Mochel.
From: Patrick Mochel
Signed-off-by: Kyle McMartinFix drivers.c to create new device tree nodes when no match is found.
Signed-off-by: Richard Hirst
Do a proper depth-first search returning parents before children, using the
new klist infrastructure.Signed-off-by: Richard Hirst
Fixed parisc_device traversal so that pdc_stable works again
Fixed check_dev so it doesn't dereference a parisc_device until it
has verified the bus typeSigned-off-by: Randolph Chung
Convert pa_dev->hpa from an unsigned long to a struct resource.
Use insert_resource() instead of request_mem_region().
Request resources at bus walk time instead of driver probe time.
Don't release the resources as we don't have any hotplug parisc_device
support yet.
Add parisc_pathname() to conveniently get the textual representation
of the hwpath used in sysfs.
Inline the remnants of claim_device() into its caller.Signed-off-by: Matthew Wilcox
I noticed that some of the STI regions weren't showing up in iomem.
Reading the STI spec indicated that all STI devices occupy at least 32MB.
So check for STI HPAs and give them 32MB instead of 4kB.Signed-off-by: Matthew Wilcox
Signed-off-by: Kyle McMartin
-
Not sure how it slipped by, but here's a trivial typo fix for powernow.
Signed-off-by: Chris Wright
[ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ]
Signed-off-by: Linus Torvalds -
When I originally moved exit_itimers into __exit_signal, that was the only
place where we could reliably know it was the last thread in the group
dying, without races. Since then we've gotten the signal_struct.live
counter, and do_exit can reliably do group-wide cleanup work.This patch moves the call to do_exit, where it's made without locks. This
avoids the deadlock issues that the old __exit_signal code's comment talks
about, and the one that Oleg found recently with process CPU timers.[ This replaces e03d13e985d48ac4885382c9e3b1510c78bd047f, which is why
it was just reverted. ]Signed-off-by: Roland McGrath
Signed-off-by: Linus Torvalds -
Revert commit e03d13e985d48ac4885382c9e3b1510c78bd047f, to be replaced
by a much nicer fix from Roland. -
AMD recently discovered that on some hardware, there is a race condition
possible when a C-state change request goes onto the bus at the same
time as a P-state change request.Both requests happen, but the southbridge hardware only acknowledges the
C-state change. The PowerNow! driver is then stuck in a loop, waiting
for the P-state change acknowledgement. The driver eventually times
out, but can no longer perform P-state changes.It turns out the solution is to resend the P-state change, which the
southbridge will acknowledge normally.Thanks to Johannes Winkelmann for reporting this and testing the fix.
Signed-off-by: Mark Langsdorf
Signed-off-by: Dave Jones
Signed-off-by: Linus Torvalds -
This fixes a stupid typo bug in the iSeries hash table code.
When we place a hash PTE in the secondary bucket, instead of setting the
SECONDARY flag bit, as we should, we (redundantly) set the VALID flag.This was introduced with the patch abolishing bitfields from the hash
table code. Mea culpa, oops. It hasn't been noticed until now because
in practice we don't hit the secondary bucket terribly often.Signed-off-by: David Gibson
Signed-off-by: Linus Torvalds -
The wrong state emission routines were being called for G550, and
consistent maps weren't correctly mapped...Signed-off-by: Dave Airlie
Signed-off-by: Linus Torvalds -
While working on 64K pages, I found this little buglet in our
update_mmu_cache() implementation.The code calls __hash_page() passing it an "access" parameter (the type
of access that triggers the hash) containing the bits _PAGE_RW and
_PAGE_USER of the linux PTE. The latter is useless in this case and the
former is wrong. In fact, if we have a writeable PTE and we pass
_PAGE_RW to hash_page(), it will set _PAGE_DIRTY (since we track dirty
that way, by hash faulting !dirty) which is not what we want.In fact, the correct fix is to always pass 0. That means that only
read-only or already dirty read write PTEs will be preloaded. The
(hopefully rare) case of a non dirty read write PTE can't be preloaded
this way, it will have to fault in hash_page on the actual access.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Linus Torvalds -
This fixes a typo in the div128_by_32 function used in the timekeeping
calculations on ppc64. If you look at the code it's quite obvious
that we need (rb + c) rather than (rb + b). The "b" is clearly just a
typo.Signed-off-by: Paul Mackerras
Signed-off-by: Linus Torvalds -
This fixes handling of the phy identifiers in mptsas.
Signed-off-by: Eric Moore
[ split it a pre-2.6.14 portion from Eric's bigger patch ]
Signed-off-by: Christoph Hellwig
Signed-off-by: Linus Torvalds
21 Oct, 2005
7 commits
-
Signed-off-by: Russell King
-
Patch from Ben Dooks
From: Guillaume Gourat
Add MASK definitions for DCLK0 and DCLK1
Signed-off-by: Guillaume Gourat
Signed-off-by: Ben Dooks
Signed-off-by: Russell King -
Patch from Ben Dooks
The current Simtec BAST nand area timings are a little
too slow to be obtained by a 2410 running at 266MHz,
so reduce the timings slightly to bring them into the
acceptable range.Signed-off-by: Ben Dooks
Signed-off-by: Russell King -
Patch from Ben Dooks
Avoid the possiblity that if the board is using
a 16.9334 or higher crystal with a high PLL
multiplier, then the pll value could overflow
the capability of an int.Also fix the value types of the intermediate
variables to unsigned int.Rewrite of patch from Guillaume Gourat
Signed-off-by: Ben Dooks
Signed-off-by: Russell King -
Patch from Matt Reimer
Adds an I2S platform_device for PXA. I2S is used to interface
with sound chips on systems like iPAQ h1910/h2200/hx4700 and
Asus 716.Signed-off-by: mreimer@vpop.net
Signed-off-by: Russell King -
It is legitimate to call tcp_fragment with len == skb->len since
that is done for FIN packets and the FIN flag counts as one byte.
So we should only check for the len > skb->len case.Signed-off-by: Herbert Xu
Signed-off-by: Arnaldo Carvalho de Melo -
Turns out the problem has nothing to do with use-after-free or double-free.
It's just that we're not clearing the CB area and DCCP unlike TCP uses a CB
format that's incompatible with IP.Signed-off-by: Herbert Xu
Signed-off-by: Ian McDonald
Signed-off-by: Arnaldo Carvalho de Melo
