06 Feb, 2013
1 commit
-
…-2.6 into next/cleanup
From Shawn Guo:
The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure. Samsung has some code setting up wdog
in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined
nowhere, it will not run. Otherwise, system can not boot at all when
wdog is set up but no one pats it.* tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: samsung: remove unused arch_decomp_wdog() code
ARM: remove unused arch_decomp_wdog()
ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOGSigned-off-by: Olof Johansson <olof@lixom.net>
11 Jan, 2013
1 commit
-
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c,
all the arch_decomp_wdog() definition at platform level is unneeded.
Remmove it.Signed-off-by: Shawn Guo
Acked-by: Nicolas Pitre
Acked-by: Jason Cooper
25 Dec, 2012
2 commits
-
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.htmlIncludes mach-omap2 fixes from Igor Grinberg.
Tested-by: Robert Jarzmik
Signed-off-by: Stephen Warren -
remove ARM's struct sys_timer .offset function pointer, and instead
directly set the arch_gettimeoffset function pointer when the timer
driver is initialized. This requires multiplying all function results
by 1000, since the removed arm_gettimeoffset() did this. Also,
s/unsigned long/u32/ just to make the function prototypes exactly
match that of arch_gettimeoffset.Cc: Russell King
Cc: Andrew Victor
Cc: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard
Cc: Hartley Sweeten
Cc: Ryan Mallon
Cc: Ben Dooks
Cc: Kukjin Kim
Signed-off-by: Stephen Warren
02 Oct, 2012
1 commit
-
Pull ARM soc driver specific changes from Olof Johansson:
- A long-coming conversion of various platforms to a common LED
infrastructure
- AT91 is moved over to use the newer MCI driver for MMC
- Pincontrol conversions for samsung platforms
- DT bindings for gscaler on samsung
- i2c driver fixes for tegra, acked by i2c maintainerFix up conflicts as per Olof.
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
drivers: bus: omap_l3: use resources instead of hardcoded irqs
pinctrl: exynos: Fix wakeup IRQ domain registration check
pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
pinctrl: exynos: Correct the detection of wakeup-eint node
pinctrl: exynos: Mark exynos_irq_demux_eint as inline
pinctrl: exynos: Handle only unmasked wakeup interrupts
pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
drivers: bus: Move the OMAP interconnect driver to drivers/bus/
i2c: tegra: dynamically control fast clk
i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
ARM: tegra: clock: remove unused clock entry for i2c
ARM: tegra: clock: add connection name in i2c clock entry
i2c: tegra: pass proper name for getting clock
ARM: tegra: clock: add i2c fast clock entry in clock table
ARM: EXYNOS: Adds G-Scaler device from Device Tree
ARM: EXYNOS: Add clock support for G-Scaler
ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
...
18 Sep, 2012
1 commit
-
ARM is moving to stricter checks on readl/write functions,
so we need to use the correct types everywhere.Signed-off-by: Arnd Bergmann
01 Aug, 2012
1 commit
-
Signed-off-by: Bryan Wu
30 Mar, 2012
1 commit
-
Pull "ARM: cleanups of io includes" from Olof Johansson:
"Rob Herring has done a sweeping change cleaning up all of the
mach/io.h includes, moving some of the oft-repeated macros to a common
location and removing a bunch of boiler plate. This is another step
closer to a common zImage for multiple platforms."Fix up various fairly trivial conflicts ( removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
ARM: tegra: Include assembler.h in sleep.S to fix build break
ARM: pxa: use common IOMEM definition
ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
ARM: __io abuse cleanup
ARM: create a common IOMEM definition
ARM: iop13xx: fix missing declaration of iop13xx_init_early
ARM: fix ioremap/iounmap for !CONFIG_MMU
ARM: kill off __mem_pci
ARM: remove bunch of now unused mach/io.h files
ARM: make mach/io.h include optional
ARM: clps711x: remove unneeded include of mach/io.h
ARM: dove: add explicit include of dove.h to addr-map.c
ARM: at91: add explicit include of hardware.h to uncompressor
ARM: ep93xx: clean-up mach/io.h
ARM: tegra: clean-up mach/io.h
ARM: orion5x: clean-up mach/io.h
ARM: davinci: remove unneeded mach/io.h include
[media] davinci: remove includes of mach/io.h
ARM: OMAP: Remove remaining includes for mach/io.h
ARM: msm: clean-up mach/io.h
...
29 Mar, 2012
2 commits
-
…m/linux/kernel/git/dhowells/linux-asm_system
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
... -
Disintegrate asm/system.h for ARM.
Signed-off-by: David Howells
cc: Russell King
cc: linux-arm-kernel@lists.infradead.org
28 Mar, 2012
1 commit
-
Pull ARM platform updates from Russell King:
"This covers platform stuff for platforms I have a direct interest in
(iow, I have the hardware). Essentially:
- as we no longer support any other Acorn platforms other than RiscPC
anymore, we can collect all that code into mach-rpc.
- convert Acorn expansion card stuff to use IRQ allocation functions,
and get rid of NO_IRQ from there.
- cleanups to the ebsa110 platform to move some private stuff out of
its header files.
- large amount of SA11x0 updates:
- conversion of private DMA implementation to DMA engine support
(this actually gives us greater flexibility in drivers over the old
API.)
- re-worked ucb1x00 updates - convert to genirq, remove sa11x0
dependencies, fix various minor issues
- move platform specific sa11x0 framebuffer data into platform files
in arch/arm instead of keeping this in the driver itself
- update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
for SIR transmissions as well as FIR
- rework sa1111 support for genirq, and irq allocation
- fix sa1111 IRQ support so it works again
- use sparse IRQ supportAfter this, I have one more pull request remaining from my current
set, which I think is going to be the most problematical as it
generates 8 conflicts."Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
ARM: 7343/1: sa11x0: convert to sparse IRQ
ARM: 7342/2: sa1100: prepare for sparse irq conversion
ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
ARM: sa11x0: remove unused DMA controller definitions
ARM: sa11x0: remove old SoC private DMA driver
USB: sa1111: add hcd .reset method
USB: sa1111: add OHCI shutdown methods
USB: sa1111: reorganize ohci-sa1111.c
USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
USB: sa1111: sparse and checkpatch cleanups
ARM: sa11x0: don't static map sa1111
ARM: sa1111: use dev_err() rather than printk()
ARM: sa1111: cleanup sub-device registration and unregistration
ARM: sa1111: only setup DMA for DMA capable devices
ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
ARM: sa1111: delete unused physical GPIO register definitions
...
07 Mar, 2012
1 commit
-
Convert ebsa110 platforms to use run-time ioremap hook instead of the
compile time hook.Signed-off-by: Rob Herring
Cc: Russell King
23 Feb, 2012
1 commit
22 Feb, 2012
1 commit
-
Now that most platforms don't need disable_fiq and arch_ret_to_user
macros, we can remove the empty macros or empty entry-macro.S files.Signed-off-by: Rob Herring
Acked-by: Jamie Iles
Acked-by: Nicolas Pitre
Acked-by: Tony Lindgren
Acked-by: Linus Walleij
Acked-by: Ryan Mallon
Acked-by: Nicolas Ferre
Acked-by: H Hartley Sweeten
Acked-by: Shawn Guo
03 Feb, 2012
2 commits
-
Signed-off-by: Russell King
-
Stop exposing platform definitions to the entire kernel tree, move
them into a private header file instead.Signed-off-by: Russell King
21 Jan, 2012
2 commits
-
When this is the only content remaining in mach/system.h then the
whole file is removed.Signed-off-by: Nicolas Pitre
Acked-by: H Hartley Sweeten
Acked-and-tested-by: Jamie Iles
Acked-by: Tony Lindgren
Acked-by: David Brown
Acked-by: Stephen Warren
Acked-by: Linus Walleij -
... and hook it to arm_pm_idle.
Signed-off-by: Nicolas Pitre
05 Jan, 2012
3 commits
-
Conflicts:
arch/arm/mach-exynos/cpu.cThe changes to arch/arm/mach-exynos/cpu.c were moved to
mach-exynos/common.c. -
Remove the now empty arch_reset() from all the mach/system.h includes,
and remove its callsite. Remove arm_machine_restart() as this function
no longer does anything useful.For samsung platforms, remove the include of mach/system-reset.h and
plat/system-reset.h from their respective mach/system.h headers as these
just define their arch_reset functions. As a result, the s3c2410 and
plat-samsung system-reset.h files are no longer referenced, so remove
these files entirely.Acked-by: Nicolas Pitre
Acked-by: H Hartley Sweeten
Acked-by: Jamie Iles
Acked-by: Tony Lindgren
Acked-by: Linus Walleij
Signed-off-by: Russell King -
Hook the EBSA110 platform restart code into the new restart hook rather
than using arch_reset().Signed-off-by: Russell King
06 Dec, 2011
1 commit
27 Nov, 2011
1 commit
-
Signed-off-by: Nicolas Pitre
21 Nov, 2011
1 commit
-
We only need to set the system up for a soft-restart if we're going to
be doing a soft-restart. Provide a new function (soft_restart()) which
does the setup and final call for this, and make platforms use it.
Eliminate the call to setup_restart() from the default handler.This means that platforms arch_reset() function is no longer called with
the page tables prepared for a soft-restart, and caches will still be
enabled.Acked-by: Nicolas Pitre
Acked-by: Will Deacon
Acked-by: H Hartley Sweeten
Acked-by: Kukjin Kim
Acked-by: Sascha Hauer
Acked-by: Viresh Kumar
Acked-by: Krzysztof Ha■asa
Acked-by: Paul Mundt
Acked-by: Richard Purdie
Acked-by: Wan ZongShun
Acked-by: Eric Miao
Signed-off-by: Russell King
11 Nov, 2011
1 commit
-
Change 'soft_reboot' into a more generic 'restart_mode' variable,
allowing the default restart mode to be specified.Acked-by: Nicolas Pitre
Acked-by: Will Deacon
Acked-by: H Hartley Sweeten
Signed-off-by: Russell King
29 Oct, 2011
1 commit
-
…git-cur/linux-2.6-arm
* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)
ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET
ARM: gic, local timers: use the request_percpu_irq() interface
ARM: gic: consolidate PPI handling
ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H
ARM: mach-s5p64x0: remove mach/memory.h
ARM: mach-s3c64xx: remove mach/memory.h
ARM: plat-mxc: remove mach/memory.h
ARM: mach-prima2: remove mach/memory.h
ARM: mach-zynq: remove mach/memory.h
ARM: mach-bcmring: remove mach/memory.h
ARM: mach-davinci: remove mach/memory.h
ARM: mach-pxa: remove mach/memory.h
ARM: mach-ixp4xx: remove mach/memory.h
ARM: mach-h720x: remove mach/memory.h
ARM: mach-vt8500: remove mach/memory.h
ARM: mach-s5pc100: remove mach/memory.h
ARM: mach-tegra: remove mach/memory.h
ARM: plat-tcc: remove mach/memory.h
ARM: mach-mmp: remove mach/memory.h
ARM: mach-cns3xxx: remove mach/memory.h
...Fix up mostly pretty trivial conflicts in:
- arch/arm/Kconfig
- arch/arm/include/asm/localtimer.h
- arch/arm/kernel/Makefile
- arch/arm/mach-shmobile/board-ap4evb.c
- arch/arm/mach-u300/core.c
- arch/arm/mm/dma-mapping.c
- arch/arm/mm/proc-v7.S
- arch/arm/plat-omap/Kconfig
largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP ->
CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and
addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
25 Oct, 2011
1 commit
-
Conflicts:
arch/arm/mach-integrator/integrator_ap.c
17 Oct, 2011
1 commit
-
Boards used to specify zreladdr in their Makefile.boot with
zreladdr-y := x, so conflicting zreladdrs were silently overwritten.
This patch changes this to zreladdr-y += x, so that we end
up with multiple words in zreladdr in such a case. We can
detect this later and complain if necessary.Signed-off-by: Sascha Hauer
Signed-off-by: Russell King
26 Sep, 2011
1 commit
-
Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use. Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.Signed-off-by: nicolas Pitre
Reviewed-by: Kevin Hilman
22 Aug, 2011
1 commit
-
Signed-off-by: Nicolas Pitre
Acked-by: Arnd Bergmann
17 Aug, 2011
1 commit
-
Remove IO_SPACE_LIMIT definitions from platforms which have a well
defined ISA or PCI, and has a 64K window.EBSA110 - well defined set of ISA devices.
Footbridge, Integrator, IXP4xx, VT8500 - PCI platforms.Signed-off-by: Russell King
29 Mar, 2011
2 commits
-
Use irq_set_chip_and_handler() instead. Converted with coccinelle.
Signed-off-by: Thomas Gleixner
-
Convert to the new function names. Automated with coccinelle.
Signed-off-by: Thomas Gleixner
18 Feb, 2011
1 commit
-
This uncouple PHYS_OFFSET from the platform definitions, thereby
facilitating run-time computation of the physical memory offset.Acked-by: Nicolas Pitre
Acked-by: Viresh Kumar
Acked-by: H Hartley Sweeten
Acked-by: Magnus Damm
Acked-by: Tony Lindgren
Acked-by: Jean-Christophe PLAGNIOL-VILLARD
Acked-by: Wan ZongShun
Acked-by: Kukjin Kim
Acked-by: Eric Miao
Acked-by: Jiandong Zheng
Signed-off-by: Russell King
14 Jan, 2011
1 commit
-
Signed-off-by: Lennert Buytenhek
Acked-by: Russell King
22 Nov, 2010
1 commit
-
Commit 7c63984b86 (ARM: do not define VMALLOC_END relative to PAGE_OFFSET)
changed VMALLOC_END to be an explicit value. Before this, it was
relative to PAGE_OFFSET and therefore converted to unsigned long
as PAGE_OFFSET is an unsigned long. This introduced the following
build warning. Fix this by changing the explicit defines of
VMALLOC_END to be unsigned long.CC arch/arm/mm/init.o
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int'Signed-off-by: Anand Gadiyar
Acked-by: Uwe Kleine-K
Acked-by: Nicolas Pitre
Signed-off-by: Russell King
20 Oct, 2010
2 commits
-
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.The various declarations were removed using the following script:
grep -rl MACHINE_START arch/arm | xargs \
sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'[ Initial patch was from Jeremy Kerr, example script from Russell King ]
Signed-off-by: Nicolas Pitre
Acked-by: Eric Miao -
Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.Updated with fixes for OMAP from Jason Wang
and Tony Lindgren , and fix for versatile express from
Lorenzo Pieralisi .Signed-off-by: Jeremy Kerr
Signed-off-by: Lorenzo Pieralisi
Signed-off-by: Jason Wang
Signed-off-by: Tony Lindgren
Tested-by: Kevin Hilman
02 Oct, 2010
1 commit
-
VMALLOC_END is supposed to be an absolute value, while PAGE_OFFSET may
vary depending on the selected user:kernel memory split mode through
CONFIG_VMSPLIT_*. In fact, the goal of moving PAGE_OFFSET down is to
accommodate more directly addressed RAM by the kernel below the vmalloc
area, and having VMALLOC_END move along PAGE_OFFSET is rather against
the very reason why PAGE_OFFSET can be moved in the first place.Signed-off-by: Nicolas Pitre
13 Feb, 2010
1 commit
-
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
arch/arm/*/include/*/debug-macro.SSigned-off-by: Tony Lindgren
Signed-off-by: Russell King
