06 Nov, 2005
23 commits
-
This patch creates a file airo.h containing prototypes of the global
functions in airo.c used by airo_cs.c .If you got strange problems with either airo_cs devices or in any other
completely unrelated part of the kernel shortly or long after a airo_cs
device was detected by the kernel, this might have been caused by the
fact that caller and callee disagreed regarding the size of the first
argument to init_airo_card()...Signed-off-by: Adrian Bunk
Signed-off-by: John W. Linville -
Some book keeping and a style fix.
Signed-off-by: Michael Chan
Signed-off-by: John W. Linville -
Refine bnx2_poll() logic to write back the most up-to-date status tag
when all work has been processed. This eliminates some occasional
extra interrupts when a older status tag is written even though all
work has been processed.The idea is to read the status tag just before exiting bnx2_poll() and
then check again for any new work. If no new work is pending, the
status tag written back will not generate any extra interrupt. This
logic is similar to the changes David Miller did to tg3_poll().Signed-off-by: Michael Chan
Signed-off-by: John W. Linville -
Dynamically determine the shared memory location where eeprom
parameters are stored instead of using a fixed location.Add speed reporting to management firmware. This allows management
firmware to know the current speed without contending for MII
registers.Signed-off-by: Michael Chan
Signed-off-by: John W. Linville -
Update bnx2 nvram code with support for 5708.
Signed-off-by: Michael Chan
Signed-off-by: John W. Linville -
Update bnx2 firmware with support for 5708.
Signed-off-by: Michael Chan
Signed-off-by: John W. Linville -
Add 5708 copper and serdes basic support, including 2.5 Gbps support
on 5708 serdes. SPEED_2500 is also added to ethtool.hSigned-off-by: Michael Chan
Signed-off-by: John W. Linville -
The last patch I sent in ("prism54: Free skb after disabling
interrupts") included a redundant NULL assignment. Thanks to Herbert
Xu for pointing it out.Signed-off-by: Daniel Drake
Signed-off-by: John W. Linville -
It seems dmascc_setup() is a leftover time before dmascc_init() was
there.Signed-off-by: Adrian Bunk
Signed-off-by: John W. Linville -
This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 the following unused global functions:
- e1000_hw.c: e1000_mc_addr_list_update
- e1000_hw.c: e1000_read_reg_io
- e1000_hw.c: e1000_enable_pciex_masterSigned-off-by: Adrian Bunk
Signed-off-by: John W. Linville -
This patch makes some needlessly global code static.
Signed-off-by: Adrian Bunk
Signed-off-by: John W. Linville -
Adds a phy_mask field to struct mii_bus and uses it. This field
indicates each phy address to be ignored when probing the mdio bus.This support is needed for the fs_enet and ibm_emac drivers to be
converted to the generic phy layer among other drivers. Many systems
lock up on probing certain phy addresses or probing doesn't return
0xffff when nothing is found at the address. A new driver I'm
working on also makes use of this mask.Signed-off-by: Matt Porter
Signed-off-by: Jeff Garzik -
Some boards using the 79c976 pcnet32 chip will hang the system if the
ethtool --register-dump is performed with the device operational. The
request to read bcr30 is retried by the PCI device infinitely without
returning data, hanging the system.Tested ia32 and ppc64.
Signed-off-by: Don Fry
Signed-off-by: Jeff Garzik -
This patch is a better fix for Allied Telesyn 2700/2701 FX boards than
the change made in early January this year. It allows the user to
select the speed/duplex via module_param, but if no selection is made,
forces the speed to 100 FD. It fixes both Bugzilla bugs 2669 and 4551.
Tested ia32 and ppc64 by myself, and by the originator of bug 2669.Signed-off-by: Don Fry
Signed-off-by: Jeff Garzik -
Display the name eth%d or pci_name() of device which fails to allocate
memory. When changing ring size via ethtool, it also releases the
lock before returning on error. Added comment that the caller of
pcnet32_alloc_ring must call pcnet32_free_ring on error, to avoid leak.
Tested ia32 by forcing allocation errors.Signed-off-by: Don Fry
Signed-off-by: Jeff Garzik -
Hi,
This patch provides updated documentation on the Neterion(S2io) driver.Please review the patch.
Signed-off-by: Ravinandan Arakali
Signed-off-by: Jeff Garzik -
Hi,
This patch provides dynamic two buffer-mode and 3 buffer-mode options.
Previously 2 buffer-mode was compilation option. Now with this patch applied
one can load driver in 2 buffer-mode with module-load parameterie.
#insmod s2io.ko rx_ring_mode=2This patch also provides 3 buffer-mode which provides header separation
functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and
"skb_shinfo(skb)->frag_list->data" will have have L4 payload.
one can load driver in 3 buffer-mode with same above module-load parameterie.
#insmod s2io.ko rx_ring_mode=3Please review the patch.
Signed-off-by: Ananda Raju
Signed-off-by: Jeff Garzik -
fid is declared as a u32 (unsigned int), and then a few lines later, it is checked for a value < 0, which is clearly useless.
In the two locations this function is used, in one it is *explicitly* given a negative number, which would be ignored with the
current definition.Thanks to LinuxICC (http://linuxicc.sf.net).
Signed-off-by: Gabriel A. Devenyi
Signed-off-by: Jeff Garzik
05 Nov, 2005
17 commits
-
Currently the driver takes a reference only for requests coming by way
of the gendisk, not for requests coming by way of the struct device or
struct scsi_device. Such requests can arrive in the rescan, flush,
and shutdown pathways.The patch also makes the scsi_disk keep a reference to the underlying
scsi_device, and it erases the scsi_device's pointer to the scsi_disk
when the scsi_device is removed (since the pointer should no longer be
used).This resolves Bugzilla entry #5237.
Signed-off-by: Alan Stern
Signed-off-by: James Bottomley -
The printks that aren't for debugging should use the name of the controller,
not the driver name. Multiple MMC controllers aren't that common today, but
this is the right way to do things.Signed-off-by: Pierre Ossman
Signed-off-by: Russell King -
There is a broken if clause in the wbsd driver that can cause the
driver to try and configure the chip even though none is found. This
results in i/o on invalid ports.Signed-off-by: Pierre Ossman
Signed-off-by: Russell King -
It looks like one of the ips patches was missing a closing brace in a
functionSigned-off-by: James Bottomley
-
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and
scsi_transport_fc.hSigned-off-by: James Bottomley
-
Use ata_pad_{alloc,free} in two drivers, to factor out common code.
Add ata_pad_{alloc,free} to two other drivers, which needed the padding
but had not been updated. -
This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver. All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.I also added the relevant PCI device ids to linux/pci_ids.h
I tested it on my 7800 GTX here and it works like a charm. I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED. ;)Signed-off-by: Linus Torvalds
-
We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until
we have a merged page.h, define PAGE_SIZE and KERNELBASE locally.
Also gets rid of some dynamic executable cruft that we had for
32-bit. With -Ttext=$(KERNELBASE) this didn't cause any problem,
but when we changed to putting . = KERNELBASE in the vmlinux.lds.S
this cruft caused the text to get linked at 0xa0 instead of
0xc0000000. Oops.Signed-off-by: Paul Mackerras
-
This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.Signed-off-by: Paul Mackerras
-
Fix some dprintk's so that NLM, NFS client, and RPC client compile
cleanly if CONFIG_SYSCTL is disabled.Test plan:
Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled.Signed-off-by: Chuck Lever
Signed-off-by: Trond Myklebust -
The sunrpc module should build properly even when CONFIG_SYSCTL is
disabled.Reported by Jan-Benedict Glaw.
Test plan:
Compile kernel with CONFIG_NFS as a module and built-in, and CONFIG_SYSCTL
enabled and disabled.Signed-off-by: Chuck Lever
Signed-off-by: Trond Myklebust -
Now that we have a method of dealing with delegation recalls, actually
enable the caching of posix and BSD locks.Signed-off-by: Trond Myklebust
-
Delegations allow us to cache posix and BSD locks, however when the
delegation is recalled, we need to "flush the cache" and send
the cached LOCK requests to the server.This patch sets up the mechanism for doing so.
Signed-off-by: Trond Myklebust
