24 Mar, 2006
3 commits
-
Stop resetting the chip on load by default, so as to preserve the BIOS
initializations. Same was done in the w83627hf driver some times ago
for the same reasons.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Document the individual alarm and beep bits of the w83781d driver.
Ideally we would offer a chip-independant interface for them, but
until it's done, it's only fair that we document the current
interface.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add support for the Winbond W83687THF chip to the w83627hf hardware
monitoring driver. This new chip is almost similar to the already
supported W83627THF chip, except for VID and a few other minor
changes.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
14 Feb, 2006
1 commit
-
Document the reset module parameter which was recently added to the
w83627hf driver.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
07 Feb, 2006
3 commits
-
Only scan I2C address 0x2d. This is the default address and no IT87xxF
chip was ever seen on I2C at a different address. These chips are
better accessed through their ISA interface anyway.This fixes bug #5889, although it doesn't address the whole class
of problems. We'd need the ability to blacklist arbitrary I2C addresses
on systems known to contain I2C devices which behave badly when probed.Plan the I2C interface for removal as well. If nobody complains within
a year, it will confirm my impression that the I2C interface isn't
actually needed by anyone.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
This is my f71805f hardware monitoring driver ported from lm_sensors
to Linux 2.6. This new driver differs from the other hardware monitoring
drivers in that it is implemented as a platform driver. This might not
be optimal yet (we would probably need a generic infrastructure and bus
type for Super-I/O logical devices) but it is certainly much better than
the i2c-isa solution.Note that this driver requires lm_sensors CVS. I hope to get it
released as 2.10.0 soon.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add some documentation for the new f71805f driver. This is almost the
same help that was present in lm_sensors, with a few minor layout fixes.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
06 Jan, 2006
1 commit
-
This patch clarifies the W83627THF VID documentation.
Signed-off-by: Mark M. Hoffman
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
29 Oct, 2005
6 commits
-
The SMSC LPC47M997 Super-I/O chip seems to be compatible with the
LPC47M192, so it is supported by the smsc47m1 driver.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Update the I2C addresses for the ADM1032 and ADT7461 chips.
Also update the links to the Analog Devices web site.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Add PEC support to the lm90 driver. Only the ADM1032 chip supports it,
and in a rather tricky way, which is why this patch comes with
documentation reinforcements. At least, this demonstrates that the new
PEC support logic in i2c-core can properly deal with chips with partial
PEC support.As enabling PEC causes a significant performance drop, it can be
disabled through a sysfs file (unsurprisingly named "pec").Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
This patch adds a new ID to the SMSC LPC47B397-NC hardware
monitoring driver - for a chip that is claimed to be 100%
compatible otherwise.Signed-off-by: Bryan Young (Utilitek Systems, Inc.)
Signed-off-by: Mark M. Hoffman
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Drop legacy ISA address support from the it87 driver. All supported
chips are Super-I/O chips, so the device ISA address can be safely read
from Super-I/O space rather than blindly assumed.Two nearby inaccurate documentation statements have been fixed as well:
* The IT8705F doesn't have an SMBus interface.
* The SiS950 doesn't have a distinct prefix.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman -
Do not enable the VIA VT82C686A/B integrated sensors by default, as
disabled sensors usually means that this feature is not used so the
values won't make any sense. This has been confusing many users in the
past:http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811
http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052It is still possible to forcibly enable the sensors by using the
force_addr module parameter.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-HartmanDocumentation/hwmon/via686a | 17 +++++++++++++++--
drivers/hwmon/via686a.c | 18 +++++++++++-------
2 files changed, 26 insertions(+), 9 deletions(-)
06 Sep, 2005
2 commits
-
This patch adds documentation entry for W83792D chip.
Signed-off-by: Rudolf Marek
Signed-off-by: Greg Kroah-Hartman -
Drop the separate client name for the LM78-J chip. This is really
only a later revision of the LM78, with almost no difference and
no difference the driver handles in any case.This was the only client name that had a dash in it, and special care
had to be taken in libsensors because of it. As we plan to write a new
library soon, I'd like to get rid of this exception before we do.As a nice side effect, it saves 876 bytes in lm78.ko.
Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman
12 Jul, 2005
1 commit
-
Part 3: Move the drivers documentation, plus two general documentation
files.Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.Signed-off-by: Jean Delvare
Signed-off-by: Greg Kroah-Hartman