# SPDX-License-Identifier: GPL-2.0

  comment "Machine Types"

  if M68KCLASSIC

  config AMIGA
  	bool "Amiga support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU
  	help
  	  This option enables support for the Amiga series of computers. If
  	  you plan to use this kernel on an Amiga, say Y here and browse the
  	  material available in <file:Documentation/m68k>; otherwise say N.
  
  config ATARI
  	bool "Atari support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU

  	select HAVE_ARCH_NVRAM_OPS

  	help
  	  This option enables support for the 68000-based Atari series of
  	  computers (including the TT, Falcon and Medusa). If you plan to use
  	  this kernel on an Atari, say Y here and browse the material
  	  available in <file:Documentation/m68k>; otherwise say N.
  
  config MAC
  	bool "Macintosh support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU

  	select HAVE_ARCH_NVRAM_OPS

  	help
  	  This option enables support for the Apple Macintosh series of
  	  computers (yes, there is experimental support now, at least for part
  	  of the series).
  
  	  Say N unless you're willing to code the remaining necessary support.
  	  ;)
  
  config APOLLO
  	bool "Apollo support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU
  	help
  	  Say Y here if you want to run Linux on an MC680x0-based Apollo
  	  Domain workstation such as the DN3500.
  
  config VME
  	bool "VME (Motorola and BVM) support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU
  	help
  	  Say Y here if you want to build a kernel for a 680x0 based VME
  	  board.  Boards currently supported include Motorola boards MVME147,
  	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
  	  BVME6000 boards from BVM Ltd are also supported.
  
  config MVME147
  	bool "MVME147 support"
  	depends on MMU
  	depends on VME
  	help
  	  Say Y to include support for early Motorola VME boards.  This will
  	  build a kernel which can run on MVME147 single-board computers.  If
  	  you select this option you will have to select the appropriate
  	  drivers for SCSI, Ethernet and serial ports later on.
  
  config MVME16x
  	bool "MVME162, 166 and 167 support"
  	depends on MMU
  	depends on VME
  	help
  	  Say Y to include support for Motorola VME boards.  This will build a
  	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
  	  MVME177 boards.  If you select this option you will have to select
  	  the appropriate drivers for SCSI, Ethernet and serial ports later
  	  on.
  
  config BVME6000
  	bool "BVME4000 and BVME6000 support"
  	depends on MMU
  	depends on VME
  	help
  	  Say Y to include support for VME boards from BVM Ltd.  This will
  	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
  	  you select this option you will have to select the appropriate
  	  drivers for SCSI, Ethernet and serial ports later on.
  
  config HP300
  	bool "HP9000/300 and HP9000/400 support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU
  	help
  	  This option enables support for the HP9000/300 and HP9000/400 series
  	  of workstations. Support for these machines is still somewhat
  	  experimental. If you plan to try to use the kernel on such a machine
  	  say Y here.
  	  Everybody else says N.
  
  config SUN3X
  	bool "Sun3x support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU
  	select M68030
  	help
  	  This option enables support for the Sun 3x series of workstations.
  	  Be warned that this support is very experimental.
  	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
  	  General Linux information on the Sun 3x series (now discontinued)
  	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
  
  	  If you don't want to compile a kernel for a Sun 3x, say N.
  
  config Q40
  	bool "Q40/Q60 support"
  	depends on MMU
  	select MMU_MOTOROLA if MMU
  	help
  	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
  	  manufactured in Germany.  There is an official Q40 home page at
  	  <http://www.q40.de/>.  This option enables support for the Q40 and
  	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
  	  emulation.
  
  config SUN3
  	bool "Sun3 support"
  	depends on MMU
  	depends on !MMU_MOTOROLA
  	select MMU_SUN3 if MMU
  	select M68020
  	help
  	  This option enables support for the Sun 3 series of workstations
  	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
  	  that all other hardware types must be disabled, as Sun 3 kernels
  	  are incompatible with all other m68k targets (including Sun 3x!).
  
  	  If you don't want to compile a kernel exclusively for a Sun 3, say N.

  endif # M68KCLASSIC

  config PILOT

  	bool

  
  config PILOT3
  	bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
  	depends on M68328

  	select PILOT

  	help
  	  Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
  
  config XCOPILOT_BUGS

  	bool "(X)Copilot support"

  	depends on PILOT3
  	help
  	  Support the bugs of Xcopilot.
  
  config UCSIMM
  	bool "uCsimm module support"
  	depends on M68EZ328
  	help
  	  Support for the Arcturus Networks uCsimm module.
  
  config UCDIMM
  	bool "uDsimm module support"
  	depends on M68VZ328
  	help
  	  Support for the Arcturus Networks uDsimm module.
  
  config DRAGEN2
  	bool "DragenEngine II board support"
  	depends on M68VZ328
  	help
  	  Support for the DragenEngine II board.
  
  config DIRECT_IO_ACCESS

  	bool "Allow user to access IO directly"

  	depends on (UCSIMM || UCDIMM || DRAGEN2)
  	help
  	  Disable the CPU internal registers protection in user mode,

  	  to allow a user application to read/write them.

  
  config INIT_LCD

  	bool "Initialize LCD"

  	depends on (UCSIMM || UCDIMM || DRAGEN2)
  	help
  	  Initialize the LCD controller of the 68x328 processor.
  
  config MEMORY_RESERVE

  	int "Memory reservation (MiB)"

  	depends on (UCSIMM || UCDIMM)
  	help
  	  Reserve certain memory regions on 68x328 based boards.

  config ARN5206
  	bool "Arnewsh 5206 board support"
  	depends on M5206
  	help
  	  Support for the Arnewsh 5206 board.
  
  config M5206eC3
  	bool "Motorola M5206eC3 board support"
  	depends on M5206e
  	help
  	  Support for the Motorola M5206eC3 board.
  
  config ELITE
  	bool "Motorola M5206eLITE board support"
  	depends on M5206e
  	help
  	  Support for the Motorola M5206eLITE board.

  config M5235EVB
  	bool "Freescale M5235EVB support"
  	depends on M523x
  	help
  	  Support for the Freescale M5235EVB board.

  config M5249C3
  	bool "Motorola M5249C3 board support"
  	depends on M5249
  	help
  	  Support for the Motorola M5249C3 board.

  config M5272C3
  	bool "Motorola M5272C3 board support"
  	depends on M5272
  	help
  	  Support for the Motorola M5272C3 board.

  config WILDFIRE
  	bool "Intec Automation Inc. WildFire board support"
  	depends on M528x
  	help
  	  Support for the Intec Automation Inc. WildFire.

  config WILDFIREMOD
  	bool "Intec Automation Inc. WildFire module support"
  	depends on M528x
  	help
  	  Support for the Intec Automation Inc. WildFire module.

  
  config ARN5307
  	bool "Arnewsh 5307 board support"
  	depends on M5307
  	help
  	  Support for the Arnewsh 5307 board.
  
  config M5307C3
  	bool "Motorola M5307C3 board support"
  	depends on M5307
  	help
  	  Support for the Motorola M5307C3 board.

  config SECUREEDGEMP3
  	bool "SnapGear SecureEdge/MP3 platform support"
  	depends on M5307
  	help
  	  Support for the SnapGear SecureEdge/MP3 platform.
  
  config M5407C3
  	bool "Motorola M5407C3 board support"
  	depends on M5407
  	help
  	  Support for the Motorola M5407C3 board.

  config AMCORE
  	bool "Sysam AMCORE board support"
  	depends on M5307
  	help
  	  Support for the Sysam AMCORE open-hardware generic board.

  config STMARK2
          bool "Sysam stmark2 board support"
          depends on M5441x
          help
            Support for the Sysam stmark2 open-hardware generic board.

  config FIREBEE
  	bool "FireBee board support"
  	depends on M547x
  	help
  	  Support for the FireBee ColdFire 5475 based board.

  config CLEOPATRA
  	bool "Feith CLEOPATRA board support"
  	depends on (M5307 || M5407)
  	help
  	  Support for the Feith Cleopatra boards.
  
  config CANCam
  	bool "Feith CANCam board support"
  	depends on M5272
  	help
  	  Support for the Feith CANCam board.
  
  config SCALES
  	bool "Feith SCALES board support"
  	depends on M5272
  	help
  	  Support for the Feith SCALES board.
  
  config NETtel
  	bool "SecureEdge/NETtel board support"
  	depends on (M5206e || M5272 || M5307)
  	help
  	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.

  config MOD5272
  	bool "Netburner MOD-5272 board support"
  	depends on M5272
  	help
  	  Support for the Netburner MOD-5272 board.

  if !MMU || COLDFIRE
  
  comment "Machine Options"

  config UBOOT
  	bool "Support for U-Boot command line parameters"
  	help
  	  If you say Y here kernel will try to collect command
  	  line parameters from the initial u-boot stack.

  config 4KSTACKS
  	bool "Use 4Kb for kernel stacks instead of 8Kb"
  	default y
  	help
  	  If you say Y here the kernel will use a 4Kb stacksize for the
  	  kernel stack attached to each process/thread. This facilitates
  	  running more threads on a system and also reduces the pressure
  	  on the VM subsystem for higher order allocations.

  comment "RAM configuration"
  
  config RAMBASE
  	hex "Address of the base of RAM"
  	default "0"
  	help
  	  Define the address that RAM starts at. On many platforms this is
  	  0, the base of the address space. And this is the default. Some
  	  platforms choose to setup their RAM at other addresses within the
  	  processor address space.
  
  config RAMSIZE

  	hex "Size of RAM (in bytes), or 0 for automatic"

  	default "0x400000"
  	help
  	  Define the size of the system RAM. If you select 0 then the
  	  kernel will try to probe the RAM size at runtime. This is not
  	  supported on all CPU types.
  
  config VECTORBASE
  	hex "Address of the base of system vectors"
  	default "0"
  	help

  	  Define the address of the system vectors. Commonly this is

  	  put at the start of RAM, but it doesn't have to be. On ColdFire
  	  platforms this address is programmed into the VBR register, thus
  	  actually setting the address to use.

  config MBAR
  	hex "Address of the MBAR (internal peripherals)"
  	default "0x10000000"
  	depends on HAVE_MBAR
  	help
  	  Define the address of the internal system peripherals. This value
  	  is set in the processors MBAR register. This is generally setup by
  	  the boot loader, and will not be written by the kernel. By far most
  	  ColdFire boards use the default 0x10000000 value, so if unsure then
  	  use this.
  
  config IPSBAR
  	hex "Address of the IPSBAR (internal peripherals)"
  	default "0x40000000"
  	depends on HAVE_IPSBAR
  	help
  	  Define the address of the internal system peripherals. This value
  	  is set in the processors IPSBAR register. This is generally setup by
  	  the boot loader, and will not be written by the kernel. By far most
  	  ColdFire boards use the default 0x40000000 value, so if unsure then
  	  use this.

  config KERNELBASE
  	hex "Address of the base of kernel code"
  	default "0x400"
  	help
  	  Typically on m68k systems the kernel will not start at the base
  	  of RAM, but usually some small offset from it. Define the start
  	  address of the kernel here. The most common setup will have the
  	  processor vectors at the base of RAM and then the start of the
  	  kernel. On some platforms some RAM is reserved for boot loaders
  	  and the kernel starts after that. The 0x400 default was based on
  	  a system with the RAM based at address 0, and leaving enough room
  	  for the theoretical maximum number of 256 vectors.

  comment "ROM configuration"
  
  config ROM
  	bool "Specify ROM linker regions"

  	help
  	  Define a ROM region for the linker script. This creates a kernel
  	  that can be stored in flash, with possibly the text, and data
  	  regions being copied out to RAM at startup.
  
  config ROMBASE
  	hex "Address of the base of ROM device"
  	default "0"
  	depends on ROM
  	help
  	  Define the address that the ROM region starts at. Some platforms
  	  use this to set their chip select region accordingly for the boot
  	  device.
  
  config ROMVEC
  	hex "Address of the base of the ROM vectors"
  	default "0"
  	depends on ROM
  	help
  	  This is almost always the same as the base of the ROM. Since on all

  	  68000 type variants the vectors are at the base of the boot device

  	  on system startup.

  config ROMSTART
  	hex "Address of the base of system image in ROM"
  	default "0x400"
  	depends on ROM
  	help
  	  Define the start address of the system image in ROM. Commonly this
  	  is strait after the ROM vectors.
  
  config ROMSIZE
  	hex "Size of the ROM device"
  	default "0x100000"
  	depends on ROM
  	help
  	  Size of the ROM device. On some platforms this is used to setup
  	  the chip select that controls the boot ROM device.

  choice
  	prompt "Kernel executes from"
  	---help---
  	  Choose the memory type that the kernel will be running in.
  
  config RAMKERNEL
  	bool "RAM"
  	help
  	  The kernel will be resident in RAM when running.
  
  config ROMKERNEL
  	bool "ROM"
  	help

  	  The kernel will be resident in FLASH/ROM when running. This is
  	  often referred to as Execute-in-Place (XIP), since the kernel
  	  code executes from the position it is stored in the FLASH/ROM.

  
  endchoice

  endif