/*

   *  pxa2xx_ssp.h

   *
   *  Copyright (C) 2003 Russell King, All Rights Reserved.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
   *
   * This driver supports the following PXA CPU/SSP ports:-
   *
   *       PXA250     SSP
   *       PXA255     SSP, NSSP
   *       PXA26x     SSP, NSSP, ASSP
   *       PXA27x     SSP1, SSP2, SSP3

   *       PXA3xx     SSP1, SSP2, SSP3, SSP4

   */

  #ifndef __LINUX_SSP_H
  #define __LINUX_SSP_H

  
  #include <linux/list.h>

  #include <linux/io.h>

  /*
   * SSP Serial Port Registers
   * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
   * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
   */
  
  #define SSCR0		(0x00)  /* SSP Control Register 0 */
  #define SSCR1		(0x04)  /* SSP Control Register 1 */
  #define SSSR		(0x08)  /* SSP Status Register */
  #define SSITR		(0x0C)  /* SSP Interrupt Test Register */
  #define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
  
  #define SSTO		(0x28)  /* SSP Time Out Register */
  #define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
  #define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
  #define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
  #define SSTSS		(0x38)  /* SSP Timeslot Status */
  #define SSACD		(0x3C)  /* SSP Audio Clock Divider */

  #define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */

  
  /* Common PXA2xx bits first */
  #define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
  #define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
  #define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
  #define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
  #define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
  #define SSCR0_National	(0x2 << 4)	/* National Microwire */
  #define SSCR0_ECS	(1 << 6)	/* External clock select */
  #define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
  #define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */

  /* PXA27x, PXA3xx */

  #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
  #define SSCR0_NCS	(1 << 21)	/* Network clock select */
  #define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
  #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
  #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
  #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */

  #define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */

  #define SSCR0_ACS	(1 << 30)	/* Audio clock select */
  #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */

  
  #define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
  #define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
  #define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
  #define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
  #define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
  #define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */

  #define SSSR_ALT_FRM_MASK	3	/* Masks the SFRM signal number */

  #define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
  #define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
  #define SSSR_BSY	(1 << 4)	/* SSP Busy */
  #define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
  #define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
  #define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */

  
  #ifdef CONFIG_ARCH_PXA
  #define RX_THRESH_DFLT	8
  #define TX_THRESH_DFLT	8
  
  #define SSSR_TFL_MASK	(0xf << 8)	/* Transmit FIFO Level mask */
  #define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */
  
  #define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
  #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
  #define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
  #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
  
  #else
  
  #define RX_THRESH_DFLT	2
  #define TX_THRESH_DFLT	2
  
  #define SSSR_TFL_MASK	(0x3 << 8)	/* Transmit FIFO Level mask */
  #define SSSR_RFL_MASK	(0x3 << 12)	/* Receive FIFO Level mask */
  
  #define SSCR1_TFT	(0x000000c0)	/* Transmit FIFO Threshold (mask) */
  #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
  #define SSCR1_RFT	(0x00000c00)	/* Receive FIFO Threshold (mask) */
  #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
  #endif

  
  /* extra bits in PXA255, PXA26x and PXA27x SSP ports */
  #define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
  #define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
  #define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
  #define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
  #define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
  #define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
  #define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
  #define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
  #define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
  #define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
  #define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
  #define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
  #define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
  #define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
  #define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */

  #define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */

  #define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
  #define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
  #define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
  
  #define SSSR_BCE		(1 << 23)	/* Bit Count Error */
  #define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
  #define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
  #define SSSR_EOC		(1 << 20)	/* End Of Chain */
  #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
  #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */

  #define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */

  #define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
  #define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
  #define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
  #define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
  #define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
  #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
  #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
  #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
  
  /* PXA3xx */
  #define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
  #define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
  #define SSPSP_TIMING_MASK	(0x7f8001f0)

  
  #define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
  #define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
  #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */

  #define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */

  enum pxa_ssp_type {
  	SSP_UNDEFINED = 0,
  	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
  	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
  	PXA27x_SSP,

  	PXA168_SSP,

  	CE4100_SSP,

  };
  
  struct ssp_device {
  	struct platform_device *pdev;
  	struct list_head	node;
  
  	struct clk	*clk;
  	void __iomem	*mmio_base;
  	unsigned long	phys_base;
  
  	const char	*label;
  	int		port_id;
  	int		type;
  	int		use_count;
  	int		irq;
  	int		drcmr_rx;
  	int		drcmr_tx;
  };

  /**

   * pxa_ssp_write_reg - Write to a SSP register

   *
   * @dev: SSP device to access
   * @reg: Register to write to
   * @val: Value to be written.
   */

  static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)

  {
  	__raw_writel(val, dev->mmio_base + reg);
  }
  
  /**

   * pxa_ssp_read_reg - Read from a SSP register

   *
   * @dev: SSP device to access
   * @reg: Register to read from
   */

  static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)

  {
  	return __raw_readl(dev->mmio_base + reg);
  }

  struct ssp_device *pxa_ssp_request(int port, const char *label);
  void pxa_ssp_free(struct ssp_device *);

  #endif