mpc86xx_hpcn.c 10.6 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453
/*
 * MPC86xx HPCN board specific routines
 *
 * Recode: ZHANG WEI <wei.zhang@freescale.com>
 * Initial author: Xianghua Xiao <x.xiao@freescale.com>
 *
 * Copyright 2006 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>

#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <asm/i8259.h>

#include <asm/mpic.h>

#include <sysdev/fsl_soc.h>

#include "mpc86xx.h"
#include "mpc8641_hpcn.h"

#undef DEBUG

#ifdef DEBUG
#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0)
#else
#define DBG(fmt...) do { } while(0)
#endif

#ifdef CONFIG_PCI
static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
	unsigned int cascade_irq = i8259_irq();
	if (cascade_irq != NO_IRQ)
		generic_handle_irq(cascade_irq);
	desc->chip->eoi(irq);
}
#endif	/* CONFIG_PCI */

void __init
mpc86xx_hpcn_init_irq(void)
{
	struct mpic *mpic1;
	struct device_node *np;
	struct resource res;
#ifdef CONFIG_PCI
	struct device_node *cascade_node = NULL;
	int cascade_irq;
#endif

	/* Determine PIC address. */
	np = of_find_node_by_type(NULL, "open-pic");
	if (np == NULL)
		return;
	of_address_to_resource(np, 0, &res);

	/* Alloc mpic structure and per isu has 16 INT entries. */
	mpic1 = mpic_alloc(np, res.start,
			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
			16, NR_IRQS - 4,
			" MPIC     ");
	BUG_ON(mpic1 == NULL);

	mpic_assign_isu(mpic1, 0, res.start + 0x10000);

	/* 48 Internal Interrupts */
	mpic_assign_isu(mpic1, 1, res.start + 0x10200);
	mpic_assign_isu(mpic1, 2, res.start + 0x10400);
	mpic_assign_isu(mpic1, 3, res.start + 0x10600);

	/* 16 External interrupts
	 * Moving them from [0 - 15] to [64 - 79]
	 */
	mpic_assign_isu(mpic1, 4, res.start + 0x10000);

	mpic_init(mpic1);

#ifdef CONFIG_PCI
	/* Initialize i8259 controller */
	for_each_node_by_type(np, "interrupt-controller")
		if (of_device_is_compatible(np, "chrp,iic")) {
			cascade_node = np;
			break;
		}
	if (cascade_node == NULL) {
		printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
		return;
	}

	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
	if (cascade_irq == NO_IRQ) {
		printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
		return;
	}
	DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);

	i8259_init(cascade_node, 0);
	of_node_put(cascade_node);

	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
#endif
}

#ifdef CONFIG_PCI

enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
const unsigned char uli1575_irq_route_table[16] = {
	0, 	/* 0: Reserved */
	0x8, 	/* 1: 0b1000 */
	0, 	/* 2: Reserved */
	0x2,	/* 3: 0b0010 */
	0x4,	/* 4: 0b0100 */
	0x5, 	/* 5: 0b0101 */
	0x7,	/* 6: 0b0111 */
	0x6,	/* 7: 0b0110 */
	0, 	/* 8: Reserved */
	0x1,	/* 9: 0b0001 */
	0x3,	/* 10: 0b0011 */
	0x9,	/* 11: 0b1001 */
	0xb,	/* 12: 0b1011 */
	0, 	/* 13: Reserved */
	0xd,	/* 14, 0b1101 */
	0xf,	/* 15, 0b1111 */
};

static int __devinit
get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
{
	struct of_irq oirq;
	u32 laddr[3];
	struct device_node *hosenode = hose ? hose->arch_data : NULL;

	if (!hosenode) return -EINVAL;

	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
	laddr[1] = laddr[2] = 0;
	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
	DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
			laddr[0], slot, pin, oirq.specifier[0]);
	return oirq.specifier[0];
}

static void __devinit quirk_uli1575(struct pci_dev *dev)
{
	unsigned short temp;
	struct pci_controller *hose = pci_bus_to_host(dev->bus);
	unsigned char irq2pin[16], c;
	unsigned long pirq_map_word = 0;
	u32 irq;
	int i;

	/*
	 * ULI1575 interrupts route setup
	 */
	memset(irq2pin, 0, 16); /* Initialize default value 0 */

	/*
	 * PIRQA -> PIRQD mapping read from OF-tree
	 *
	 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
	 *                PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
	 */
	for (i = 0; i < 4; i++){
		irq = get_pci_irq_from_of(hose, 17, i + 1);
		if (irq > 0 && irq < 16)
			irq2pin[irq] = PIRQA + i;
		else
			printk(KERN_WARNING "ULI1575 device"
			    "(slot %d, pin %d) irq %d is invalid.\n",
			    17, i, irq);
	}

	/*
	 * PIRQE -> PIRQF mapping set manually
	 *
	 * IRQ pin   IRQ#
	 * PIRQE ---- 9
	 * PIRQF ---- 10
	 * PIRQG ---- 11
	 * PIRQH ---- 12
	 */
	for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;

	/* Set IRQ-PIRQ Mapping to ULI1575 */
	for (i = 0; i < 16; i++)
		if (irq2pin[i])
			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
				<< ((irq2pin[i] - PIRQA) * 4);

	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
			pirq_map_word);
	pci_write_config_dword(dev, 0x48, pirq_map_word);

#define ULI1575_SET_DEV_IRQ(slot, pin, reg) 				\
	do { 								\
		int irq; 						\
		irq = get_pci_irq_from_of(hose, slot, pin); 		\
		if (irq > 0 && irq < 16) 				\
			pci_write_config_byte(dev, reg, irq2pin[irq]); 	\
		else							\
			printk(KERN_WARNING "ULI1575 device"		\
			    "(slot %d, pin %d) irq %d is invalid.\n",	\
			    slot, pin, irq);				\
	} while(0)

	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
	ULI1575_SET_DEV_IRQ(28, 1, 0x86);

	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
	ULI1575_SET_DEV_IRQ(28, 2, 0x87);

	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
	ULI1575_SET_DEV_IRQ(28, 3, 0x88);

	/* USB 2.0 controller, slot 28, pin 4 */
	irq = get_pci_irq_from_of(hose, 28, 4);
	if (irq >= 0 && irq <=15)
		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);

	/* Audio controller, slot 29, pin 1 */
	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);

	/* Modem controller, slot 29, pin 2 */
	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);

	/* HD audio controller, slot 29, pin 3 */
	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);

	/* SMB interrupt: slot 30, pin 1 */
	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);

	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);

	/* Serial ATA interrupt: slot 31, pin 1 */
	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);

	/* Primary PATA IDE IRQ: 14
	 * Secondary PATA IDE IRQ: 15
	 */
	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);

	/* Set IRQ14 and IRQ15 to legacy IRQs */
	pci_read_config_word(dev, 0x46, &temp);
	temp |= 0xc000;
	pci_write_config_word(dev, 0x46, temp);

	/* Set i8259 interrupt trigger
	 * IRQ 3:  Level
	 * IRQ 4:  Level
	 * IRQ 5:  Level
	 * IRQ 6:  Level
	 * IRQ 7:  Level
	 * IRQ 9:  Level
	 * IRQ 10: Level
	 * IRQ 11: Level
	 * IRQ 12: Level
	 * IRQ 14: Edge
	 * IRQ 15: Edge
	 */
	outb(0xfa, 0x4d0);
	outb(0x1e, 0x4d1);

#undef ULI1575_SET_DEV_IRQ

	/* Disable the HD interface and enable the AC97 interface. */
	pci_read_config_byte(dev, 0xb8, &c);
	c &= 0x7f;
	pci_write_config_byte(dev, 0xb8, c);
}

static void __devinit quirk_uli5288(struct pci_dev *dev)
{
	unsigned char c;

	pci_read_config_byte(dev,0x83,&c);
	c |= 0x80;
	pci_write_config_byte(dev, 0x83, c);

	pci_write_config_byte(dev, 0x09, 0x01);
	pci_write_config_byte(dev, 0x0a, 0x06);

	pci_read_config_byte(dev,0x83,&c);
	c &= 0x7f;
	pci_write_config_byte(dev, 0x83, c);

	pci_read_config_byte(dev,0x84,&c);
	c |= 0x01;
	pci_write_config_byte(dev, 0x84, c);
}

static void __devinit quirk_uli5229(struct pci_dev *dev)
{
	unsigned short temp;
	pci_write_config_word(dev, 0x04, 0x0405);
	pci_read_config_word(dev, 0x4a, &temp);
	temp |= 0x1000;
	pci_write_config_word(dev, 0x4a, temp);
}

static void __devinit early_uli5249(struct pci_dev *dev)
{
	unsigned char temp;
	pci_write_config_word(dev, 0x04, 0x0007);
	pci_read_config_byte(dev, 0x7c, &temp);
	pci_write_config_byte(dev, 0x7c, 0x80);
	pci_write_config_byte(dev, 0x09, 0x01);
	pci_write_config_byte(dev, 0x7c, temp);
	dev->class |= 0x1;
}

DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
#endif /* CONFIG_PCI */


static void __init
mpc86xx_hpcn_setup_arch(void)
{
	struct device_node *np;

	if (ppc_md.progress)
		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);

	np = of_find_node_by_type(NULL, "cpu");
	if (np != 0) {
		const unsigned int *fp;

		fp = of_get_property(np, "clock-frequency", NULL);
		if (fp != 0)
			loops_per_jiffy = *fp / HZ;
		else
			loops_per_jiffy = 50000000 / HZ;
		of_node_put(np);
	}

#ifdef CONFIG_PCI
	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
		mpc86xx_add_bridge(np);

	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
#endif

	printk("MPC86xx HPCN board from Freescale Semiconductor\n");

#ifdef CONFIG_SMP
	mpc86xx_smp_init();
#endif
}


void
mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
{
	struct device_node *root;
	uint memsize = total_memory;
	const char *model = "";
	uint svid = mfspr(SPRN_SVR);

	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");

	root = of_find_node_by_path("/");
	if (root)
		model = of_get_property(root, "model", NULL);
	seq_printf(m, "Machine\t\t: %s\n", model);
	of_node_put(root);

	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}


/*
 * Called very early, device-tree isn't unflattened
 */
static int __init mpc86xx_hpcn_probe(void)
{
	unsigned long root = of_get_flat_dt_root();

	if (of_flat_dt_is_compatible(root, "mpc86xx"))
		return 1;	/* Looks good */

	return 0;
}


void
mpc86xx_restart(char *cmd)
{
	void __iomem *rstcr;

	rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);

	local_irq_disable();

	/* Assert reset request to Reset Control Register */
	out_be32(rstcr, 0x2);

	/* not reached */
}


long __init
mpc86xx_time_init(void)
{
	unsigned int temp;

	/* Set the time base to zero */
	mtspr(SPRN_TBWL, 0);
	mtspr(SPRN_TBWU, 0);

	temp = mfspr(SPRN_HID0);
	temp |= HID0_TBEN;
	mtspr(SPRN_HID0, temp);
	asm volatile("isync");

	return 0;
}


define_machine(mpc86xx_hpcn) {
	.name			= "MPC86xx HPCN",
	.probe			= mpc86xx_hpcn_probe,
	.setup_arch		= mpc86xx_hpcn_setup_arch,
	.init_IRQ		= mpc86xx_hpcn_init_irq,
	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
	.get_irq		= mpic_get_irq,
	.restart		= mpc86xx_restart,
	.time_init		= mpc86xx_time_init,
	.calibrate_decr		= generic_calibrate_decr,
	.progress		= udbg_progress,
};