xilinx-spi.c
4.72 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
/*
* Xilinx Spartan6 Slave Serial SPI Driver
*
* Copyright (C) 2017 DENX Software Engineering
*
* Anatolij Gustschin <agust@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* Manage Xilinx FPGA firmware that is loaded over SPI using
* the slave serial configuration interface.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fpga/fpga-mgr.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/of.h>
#include <linux/spi/spi.h>
#include <linux/sizes.h>
struct xilinx_spi_conf {
struct spi_device *spi;
struct gpio_desc *prog_b;
struct gpio_desc *done;
};
static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
{
struct xilinx_spi_conf *conf = mgr->priv;
if (!gpiod_get_value(conf->done))
return FPGA_MGR_STATE_RESET;
return FPGA_MGR_STATE_UNKNOWN;
}
static int xilinx_spi_write_init(struct fpga_manager *mgr,
struct fpga_image_info *info,
const char *buf, size_t count)
{
struct xilinx_spi_conf *conf = mgr->priv;
const size_t prog_latency_7500us = 7500;
const size_t prog_pulse_1us = 1;
if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
return -EINVAL;
}
gpiod_set_value(conf->prog_b, 1);
udelay(prog_pulse_1us); /* min is 500 ns */
gpiod_set_value(conf->prog_b, 0);
if (gpiod_get_value(conf->done)) {
dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
return -EIO;
}
/* program latency */
usleep_range(prog_latency_7500us, prog_latency_7500us + 100);
return 0;
}
static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
size_t count)
{
struct xilinx_spi_conf *conf = mgr->priv;
const char *fw_data = buf;
const char *fw_data_end = fw_data + count;
while (fw_data < fw_data_end) {
size_t remaining, stride;
int ret;
remaining = fw_data_end - fw_data;
stride = min_t(size_t, remaining, SZ_4K);
ret = spi_write(conf->spi, fw_data, stride);
if (ret) {
dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
ret);
return ret;
}
fw_data += stride;
}
return 0;
}
static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
{
struct spi_device *spi = conf->spi;
const u8 din_data[1] = { 0xff };
int ret;
ret = spi_write(conf->spi, din_data, sizeof(din_data));
if (ret)
dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
return ret;
}
static int xilinx_spi_write_complete(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct xilinx_spi_conf *conf = mgr->priv;
unsigned long timeout;
int ret;
if (gpiod_get_value(conf->done))
return xilinx_spi_apply_cclk_cycles(conf);
timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
while (time_before(jiffies, timeout)) {
ret = xilinx_spi_apply_cclk_cycles(conf);
if (ret)
return ret;
if (gpiod_get_value(conf->done))
return xilinx_spi_apply_cclk_cycles(conf);
}
dev_err(&mgr->dev, "Timeout after config data transfer.\n");
return -ETIMEDOUT;
}
static const struct fpga_manager_ops xilinx_spi_ops = {
.state = xilinx_spi_state,
.write_init = xilinx_spi_write_init,
.write = xilinx_spi_write,
.write_complete = xilinx_spi_write_complete,
};
static int xilinx_spi_probe(struct spi_device *spi)
{
struct xilinx_spi_conf *conf;
conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
if (!conf)
return -ENOMEM;
conf->spi = spi;
/* PROGRAM_B is active low */
conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
if (IS_ERR(conf->prog_b)) {
dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n",
PTR_ERR(conf->prog_b));
return PTR_ERR(conf->prog_b);
}
conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
if (IS_ERR(conf->done)) {
dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
PTR_ERR(conf->done));
return PTR_ERR(conf->done);
}
return fpga_mgr_register(&spi->dev, "Xilinx Slave Serial FPGA Manager",
&xilinx_spi_ops, conf);
}
static int xilinx_spi_remove(struct spi_device *spi)
{
fpga_mgr_unregister(&spi->dev);
return 0;
}
static const struct of_device_id xlnx_spi_of_match[] = {
{ .compatible = "xlnx,fpga-slave-serial", },
{}
};
MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
static struct spi_driver xilinx_slave_spi_driver = {
.driver = {
.name = "xlnx-slave-spi",
.of_match_table = of_match_ptr(xlnx_spi_of_match),
},
.probe = xilinx_spi_probe,
.remove = xilinx_spi_remove,
};
module_spi_driver(xilinx_slave_spi_driver)
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI");