cciss_scsi.c 47.7 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712
/*
 *    Disk Array driver for HP Smart Array controllers, SCSI Tape module.
 *    (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; version 2 of the License.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
 *    General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License
 *    along with this program; if not, write to the Free Software
 *    Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
 *    02111-1307, USA.
 *
 *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
 *    
 *    Author: Stephen M. Cameron
 */
#ifdef CONFIG_CISS_SCSI_TAPE

/* Here we have code to present the driver as a scsi driver 
   as it is simultaneously presented as a block driver.  The 
   reason for doing this is to allow access to SCSI tape drives
   through the array controller.  Note in particular, neither 
   physical nor logical disks are presented through the scsi layer. */

#include <linux/timer.h>
#include <linux/completion.h>
#include <linux/slab.h>
#include <linux/string.h>

#include <linux/atomic.h>

#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h> 

#include "cciss_scsi.h"

#define CCISS_ABORT_MSG 0x00
#define CCISS_RESET_MSG 0x01

static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
	size_t size,
	__u8 page_code, unsigned char *scsi3addr,
	int cmd_type);

static CommandList_struct *cmd_alloc(ctlr_info_t *h);
static CommandList_struct *cmd_special_alloc(ctlr_info_t *h);
static void cmd_free(ctlr_info_t *h, CommandList_struct *c);
static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c);

static int cciss_scsi_write_info(struct Scsi_Host *sh,
		char *buffer, /* data buffer */
		int length); 	   /* length of data in buffer */
static int cciss_scsi_show_info(struct seq_file *m,
				struct Scsi_Host *sh);

static int cciss_scsi_queue_command (struct Scsi_Host *h,
				     struct scsi_cmnd *cmd);
static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
static int cciss_eh_abort_handler(struct scsi_cmnd *);

static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = {
	{ .name = "cciss0", .ndevices = 0 },
	{ .name = "cciss1", .ndevices = 0 },
	{ .name = "cciss2", .ndevices = 0 },
	{ .name = "cciss3", .ndevices = 0 },
	{ .name = "cciss4", .ndevices = 0 },
	{ .name = "cciss5", .ndevices = 0 },
	{ .name = "cciss6", .ndevices = 0 },
	{ .name = "cciss7", .ndevices = 0 },
};

static struct scsi_host_template cciss_driver_template = {
	.module			= THIS_MODULE,
	.name			= "cciss",
	.proc_name		= "cciss",
	.write_info		= cciss_scsi_write_info,
	.show_info		= cciss_scsi_show_info,
	.queuecommand		= cciss_scsi_queue_command,
	.this_id		= 7,
	.cmd_per_lun		= 1,
	.use_clustering		= DISABLE_CLUSTERING,
	/* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */
	.eh_device_reset_handler= cciss_eh_device_reset_handler,
	.eh_abort_handler	= cciss_eh_abort_handler,
};

#pragma pack(1)

#define SCSI_PAD_32 8
#define SCSI_PAD_64 8

struct cciss_scsi_cmd_stack_elem_t {
	CommandList_struct cmd;
	ErrorInfo_struct Err;
	__u32 busaddr;
	int cmdindex;
	u8 pad[IS_32_BIT * SCSI_PAD_32 + IS_64_BIT * SCSI_PAD_64];
};

#pragma pack()

#pragma pack(1)
struct cciss_scsi_cmd_stack_t {
	struct cciss_scsi_cmd_stack_elem_t *pool;
	struct cciss_scsi_cmd_stack_elem_t **elem;
	dma_addr_t cmd_pool_handle;
	int top;
	int nelems;
};
#pragma pack()

struct cciss_scsi_adapter_data_t {
	struct Scsi_Host *scsi_host;
	struct cciss_scsi_cmd_stack_t cmd_stack;
	SGDescriptor_struct **cmd_sg_list;
	int registered;
	spinlock_t lock; // to protect ccissscsi[ctlr]; 
};

#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \
	&h->scsi_ctlr->lock, flags);
#define CPQ_TAPE_UNLOCK(h, flags) spin_unlock_irqrestore( \
	&h->scsi_ctlr->lock, flags);

static CommandList_struct *
scsi_cmd_alloc(ctlr_info_t *h)
{
	/* assume only one process in here at a time, locking done by caller. */
	/* use h->lock */
	/* might be better to rewrite how we allocate scsi commands in a way that */
	/* needs no locking at all. */

	/* take the top memory chunk off the stack and return it, if any. */
	struct cciss_scsi_cmd_stack_elem_t *c;
	struct cciss_scsi_adapter_data_t *sa;
	struct cciss_scsi_cmd_stack_t *stk;
	u64bit temp64;

	sa = h->scsi_ctlr;
	stk = &sa->cmd_stack; 

	if (stk->top < 0) 
		return NULL;
	c = stk->elem[stk->top]; 	
	/* memset(c, 0, sizeof(*c)); */
	memset(&c->cmd, 0, sizeof(c->cmd));
	memset(&c->Err, 0, sizeof(c->Err));
	/* set physical addr of cmd and addr of scsi parameters */
	c->cmd.busaddr = c->busaddr; 
	c->cmd.cmdindex = c->cmdindex;
	/* (__u32) (stk->cmd_pool_handle + 
		(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */

	temp64.val = (__u64) (c->busaddr + sizeof(CommandList_struct));
	/* (__u64) (stk->cmd_pool_handle + 
		(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top) +
		 sizeof(CommandList_struct)); */
	stk->top--;
	c->cmd.ErrDesc.Addr.lower = temp64.val32.lower;
	c->cmd.ErrDesc.Addr.upper = temp64.val32.upper;
	c->cmd.ErrDesc.Len = sizeof(ErrorInfo_struct);
	
	c->cmd.ctlr = h->ctlr;
	c->cmd.err_info = &c->Err;

	return (CommandList_struct *) c;
}

static void 
scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
	/* assume only one process in here at a time, locking done by caller. */
	/* use h->lock */
	/* drop the free memory chunk on top of the stack. */

	struct cciss_scsi_adapter_data_t *sa;
	struct cciss_scsi_cmd_stack_t *stk;

	sa = h->scsi_ctlr;
	stk = &sa->cmd_stack; 
	stk->top++;
	if (stk->top >= stk->nelems) {
		dev_err(&h->pdev->dev,
			"scsi_cmd_free called too many times.\n");
		BUG();
	}
	stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
}

static int
scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
{
	int i;
	struct cciss_scsi_cmd_stack_t *stk;
	size_t size;

	stk = &sa->cmd_stack;
	stk->nelems = cciss_tape_cmds + 2;
	sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
		h->chainsize, stk->nelems);
	if (!sa->cmd_sg_list && h->chainsize > 0)
		return -ENOMEM;

	size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;

	/* Check alignment, see cciss_cmd.h near CommandList_struct def. */
	BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
	/* pci_alloc_consistent guarantees 32-bit DMA address will be used */
	stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
		pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle);

	if (stk->pool == NULL) {
		cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
		sa->cmd_sg_list = NULL;
		return -ENOMEM;
	}
	stk->elem = kmalloc(sizeof(stk->elem[0]) * stk->nelems, GFP_KERNEL);
	if (!stk->elem) {
		pci_free_consistent(h->pdev, size, stk->pool,
		stk->cmd_pool_handle);
		return -1;
	}
	for (i = 0; i < stk->nelems; i++) {
		stk->elem[i] = &stk->pool[i];
		stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle + 
			(sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
		stk->elem[i]->cmdindex = i;
	}
	stk->top = stk->nelems-1;
	return 0;
}

static void
scsi_cmd_stack_free(ctlr_info_t *h)
{
	struct cciss_scsi_adapter_data_t *sa;
	struct cciss_scsi_cmd_stack_t *stk;
	size_t size;

	sa = h->scsi_ctlr;
	stk = &sa->cmd_stack; 
	if (stk->top != stk->nelems-1) {
		dev_warn(&h->pdev->dev,
			"bug: %d scsi commands are still outstanding.\n",
			stk->nelems - stk->top);
	}
	size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;

	pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle);
	stk->pool = NULL;
	cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
	kfree(stk->elem);
	stk->elem = NULL;
}

#if 0
static int xmargin=8;
static int amargin=60;

static void
print_bytes (unsigned char *c, int len, int hex, int ascii)
{

	int i;
	unsigned char *x;

	if (hex)
	{
		x = c;
		for (i=0;i<len;i++)
		{
			if ((i % xmargin) == 0 && i>0) printk("\n");
			if ((i % xmargin) == 0) printk("0x%04x:", i);
			printk(" %02x", *x);
			x++;
		}
		printk("\n");
	}
	if (ascii)
	{
		x = c;
		for (i=0;i<len;i++)
		{
			if ((i % amargin) == 0 && i>0) printk("\n");
			if ((i % amargin) == 0) printk("0x%04x:", i);
			if (*x > 26 && *x < 128) printk("%c", *x);
			else printk(".");
			x++;
		}
		printk("\n");
	}
}

static void
print_cmd(CommandList_struct *cp)
{
	printk("queue:%d\n", cp->Header.ReplyQueue);
	printk("sglist:%d\n", cp->Header.SGList);
	printk("sgtot:%d\n", cp->Header.SGTotal);
	printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper, 
			cp->Header.Tag.lower);
	printk("LUN:0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
		cp->Header.LUN.LunAddrBytes[0],
		cp->Header.LUN.LunAddrBytes[1],
		cp->Header.LUN.LunAddrBytes[2],
		cp->Header.LUN.LunAddrBytes[3],
		cp->Header.LUN.LunAddrBytes[4],
		cp->Header.LUN.LunAddrBytes[5],
		cp->Header.LUN.LunAddrBytes[6],
		cp->Header.LUN.LunAddrBytes[7]);
	printk("CDBLen:%d\n", cp->Request.CDBLen);
	printk("Type:%d\n",cp->Request.Type.Type);
	printk("Attr:%d\n",cp->Request.Type.Attribute);
	printk(" Dir:%d\n",cp->Request.Type.Direction);
	printk("Timeout:%d\n",cp->Request.Timeout);
	printk( "CDB: %02x %02x %02x %02x %02x %02x %02x %02x"
		" %02x %02x %02x %02x %02x %02x %02x %02x\n",
		cp->Request.CDB[0], cp->Request.CDB[1],
		cp->Request.CDB[2], cp->Request.CDB[3],
		cp->Request.CDB[4], cp->Request.CDB[5],
		cp->Request.CDB[6], cp->Request.CDB[7],
		cp->Request.CDB[8], cp->Request.CDB[9],
		cp->Request.CDB[10], cp->Request.CDB[11],
		cp->Request.CDB[12], cp->Request.CDB[13],
		cp->Request.CDB[14], cp->Request.CDB[15]),
	printk("edesc.Addr: 0x%08x/0%08x, Len  = %d\n", 
		cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower, 
			cp->ErrDesc.Len);
	printk("sgs..........Errorinfo:\n");
	printk("scsistatus:%d\n", cp->err_info->ScsiStatus);
	printk("senselen:%d\n", cp->err_info->SenseLen);
	printk("cmd status:%d\n", cp->err_info->CommandStatus);
	printk("resid cnt:%d\n", cp->err_info->ResidualCnt);
	printk("offense size:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_size);
	printk("offense byte:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_num);
	printk("offense value:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_value);
			
}

#endif

static int 
find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
{
	/* finds an unused bus, target, lun for a new device */
	/* assumes h->scsi_ctlr->lock is held */
	int i, found=0;
	unsigned char target_taken[CCISS_MAX_SCSI_DEVS_PER_HBA];

	memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA);

	target_taken[SELF_SCSI_ID] = 1;	
	for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++)
		target_taken[ccissscsi[h->ctlr].dev[i].target] = 1;
	
	for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) {
		if (!target_taken[i]) {
			*bus = 0; *target=i; *lun = 0; found=1;
			break;
		}
	}
	return (!found);	
}
struct scsi2map {
	char scsi3addr[8];
	int bus, target, lun;
};

static int 
cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
		struct cciss_scsi_dev_t *device,
		struct scsi2map *added, int *nadded)
{
	/* assumes h->scsi_ctlr->lock is held */
	int n = ccissscsi[h->ctlr].ndevices;
	struct cciss_scsi_dev_t *sd;
	int i, bus, target, lun;
	unsigned char addr1[8], addr2[8];

	if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
		dev_warn(&h->pdev->dev, "Too many devices, "
			"some will be inaccessible.\n");
		return -1;
	}

	bus = target = -1;
	lun = 0;
	/* Is this device a non-zero lun of a multi-lun device */
	/* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
	if (device->scsi3addr[4] != 0) {
		/* Search through our list and find the device which */
		/* has the same 8 byte LUN address, excepting byte 4. */
		/* Assign the same bus and target for this new LUN. */
		/* Use the logical unit number from the firmware. */
		memcpy(addr1, device->scsi3addr, 8);
		addr1[4] = 0;
		for (i = 0; i < n; i++) {
			sd = &ccissscsi[h->ctlr].dev[i];
			memcpy(addr2, sd->scsi3addr, 8);
			addr2[4] = 0;
			/* differ only in byte 4? */
			if (memcmp(addr1, addr2, 8) == 0) {
				bus = sd->bus;
				target = sd->target;
				lun = device->scsi3addr[4];
				break;
			}
		}
	}

	sd = &ccissscsi[h->ctlr].dev[n];
	if (lun == 0) {
		if (find_bus_target_lun(h,
			&sd->bus, &sd->target, &sd->lun) != 0)
			return -1;
	} else {
		sd->bus = bus;
		sd->target = target;
		sd->lun = lun;
	}
	added[*nadded].bus = sd->bus;
	added[*nadded].target = sd->target;
	added[*nadded].lun = sd->lun;
	(*nadded)++;

	memcpy(sd->scsi3addr, device->scsi3addr, 8);
	memcpy(sd->vendor, device->vendor, sizeof(sd->vendor));
	memcpy(sd->revision, device->revision, sizeof(sd->revision));
	memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
	sd->devtype = device->devtype;

	ccissscsi[h->ctlr].ndevices++;

	/* initially, (before registering with scsi layer) we don't 
	   know our hostno and we don't want to print anything first 
	   time anyway (the scsi layer's inquiries will show that info) */
	if (hostno != -1)
		dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
			scsi_device_type(sd->devtype), hostno,
			sd->bus, sd->target, sd->lun);
	return 0;
}

static void
cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry,
	struct scsi2map *removed, int *nremoved)
{
	/* assumes h->ctlr]->scsi_ctlr->lock is held */
	int i;
	struct cciss_scsi_dev_t sd;

	if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
	sd = ccissscsi[h->ctlr].dev[entry];
	removed[*nremoved].bus    = sd.bus;
	removed[*nremoved].target = sd.target;
	removed[*nremoved].lun    = sd.lun;
	(*nremoved)++;
	for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
		ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
	ccissscsi[h->ctlr].ndevices--;
	dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
		scsi_device_type(sd.devtype), hostno,
			sd.bus, sd.target, sd.lun);
}


#define SCSI3ADDR_EQ(a,b) ( \
	(a)[7] == (b)[7] && \
	(a)[6] == (b)[6] && \
	(a)[5] == (b)[5] && \
	(a)[4] == (b)[4] && \
	(a)[3] == (b)[3] && \
	(a)[2] == (b)[2] && \
	(a)[1] == (b)[1] && \
	(a)[0] == (b)[0])

static void fixup_botched_add(ctlr_info_t *h, char *scsi3addr)
{
	/* called when scsi_add_device fails in order to re-adjust */
	/* ccissscsi[] to match the mid layer's view. */
	unsigned long flags;
	int i, j;
	CPQ_TAPE_LOCK(h, flags);
	for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
		if (memcmp(scsi3addr,
				ccissscsi[h->ctlr].dev[i].scsi3addr, 8) == 0) {
			for (j = i; j < ccissscsi[h->ctlr].ndevices-1; j++)
				ccissscsi[h->ctlr].dev[j] =
					ccissscsi[h->ctlr].dev[j+1];
			ccissscsi[h->ctlr].ndevices--;
			break;
		}
	}
	CPQ_TAPE_UNLOCK(h, flags);
}

static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
	struct cciss_scsi_dev_t *dev2)
{
	return dev1->devtype == dev2->devtype &&
		memcmp(dev1->scsi3addr, dev2->scsi3addr,
			sizeof(dev1->scsi3addr)) == 0 &&
		memcmp(dev1->device_id, dev2->device_id,
			sizeof(dev1->device_id)) == 0 &&
		memcmp(dev1->vendor, dev2->vendor,
			sizeof(dev1->vendor)) == 0 &&
		memcmp(dev1->model, dev2->model,
			sizeof(dev1->model)) == 0 &&
		memcmp(dev1->revision, dev2->revision,
			sizeof(dev1->revision)) == 0;
}

static int
adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
	struct cciss_scsi_dev_t sd[], int nsds)
{
	/* sd contains scsi3 addresses and devtypes, but
	   bus target and lun are not filled in.  This funciton
	   takes what's in sd to be the current and adjusts
	   ccissscsi[] to be in line with what's in sd. */ 

	int i,j, found, changes=0;
	struct cciss_scsi_dev_t *csd;
	unsigned long flags;
	struct scsi2map *added, *removed;
	int nadded, nremoved;
	struct Scsi_Host *sh = NULL;

	added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
			GFP_KERNEL);
	removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
			GFP_KERNEL);

	if (!added || !removed) {
		dev_warn(&h->pdev->dev,
			"Out of memory in adjust_cciss_scsi_table\n");
		goto free_and_out;
	}

	CPQ_TAPE_LOCK(h, flags);

	if (hostno != -1)  /* if it's not the first time... */
		sh = h->scsi_ctlr->scsi_host;

	/* find any devices in ccissscsi[] that are not in 
	   sd[] and remove them from ccissscsi[] */

	i = 0;
	nremoved = 0;
	nadded = 0;
	while (i < ccissscsi[h->ctlr].ndevices) {
		csd = &ccissscsi[h->ctlr].dev[i];
		found=0;
		for (j=0;j<nsds;j++) {
			if (SCSI3ADDR_EQ(sd[j].scsi3addr,
				csd->scsi3addr)) {
				if (device_is_the_same(&sd[j], csd))
					found=2;
				else
					found=1;
				break;
			}
		}

		if (found == 0) { /* device no longer present. */ 
			changes++;
			cciss_scsi_remove_entry(h, hostno, i,
				removed, &nremoved);
			/* remove ^^^, hence i not incremented */
		} else if (found == 1) { /* device is different in some way */
			changes++;
			dev_info(&h->pdev->dev,
				"device c%db%dt%dl%d has changed.\n",
				hostno, csd->bus, csd->target, csd->lun);
			cciss_scsi_remove_entry(h, hostno, i,
				removed, &nremoved);
			/* remove ^^^, hence i not incremented */
			if (cciss_scsi_add_entry(h, hostno, &sd[j],
				added, &nadded) != 0)
				/* we just removed one, so add can't fail. */
					BUG();
			csd->devtype = sd[j].devtype;
			memcpy(csd->device_id, sd[j].device_id,
				sizeof(csd->device_id));
			memcpy(csd->vendor, sd[j].vendor,
				sizeof(csd->vendor));
			memcpy(csd->model, sd[j].model,
				sizeof(csd->model));
			memcpy(csd->revision, sd[j].revision,
				sizeof(csd->revision));
		} else 		/* device is same as it ever was, */
			i++;	/* so just move along. */
	}

	/* Now, make sure every device listed in sd[] is also
 	   listed in ccissscsi[], adding them if they aren't found */

	for (i=0;i<nsds;i++) {
		found=0;
		for (j = 0; j < ccissscsi[h->ctlr].ndevices; j++) {
			csd = &ccissscsi[h->ctlr].dev[j];
			if (SCSI3ADDR_EQ(sd[i].scsi3addr,
				csd->scsi3addr)) {
				if (device_is_the_same(&sd[i], csd))
					found=2;	/* found device */
				else
					found=1; 	/* found a bug. */
				break;
			}
		}
		if (!found) {
			changes++;
			if (cciss_scsi_add_entry(h, hostno, &sd[i],
				added, &nadded) != 0)
				break;
		} else if (found == 1) {
			/* should never happen... */
			changes++;
			dev_warn(&h->pdev->dev,
				"device unexpectedly changed\n");
			/* but if it does happen, we just ignore that device */
		}
	}
	CPQ_TAPE_UNLOCK(h, flags);

	/* Don't notify scsi mid layer of any changes the first time through */
	/* (or if there are no changes) scsi_scan_host will do it later the */
	/* first time through. */
	if (hostno == -1 || !changes)
		goto free_and_out;

	/* Notify scsi mid layer of any removed devices */
	for (i = 0; i < nremoved; i++) {
		struct scsi_device *sdev =
			scsi_device_lookup(sh, removed[i].bus,
				removed[i].target, removed[i].lun);
		if (sdev != NULL) {
			scsi_remove_device(sdev);
			scsi_device_put(sdev);
		} else {
			/* We don't expect to get here. */
			/* future cmds to this device will get selection */
			/* timeout as if the device was gone. */
			dev_warn(&h->pdev->dev, "didn't find "
				"c%db%dt%dl%d\n for removal.",
				hostno, removed[i].bus,
				removed[i].target, removed[i].lun);
		}
	}

	/* Notify scsi mid layer of any added devices */
	for (i = 0; i < nadded; i++) {
		int rc;
		rc = scsi_add_device(sh, added[i].bus,
			added[i].target, added[i].lun);
		if (rc == 0)
			continue;
		dev_warn(&h->pdev->dev, "scsi_add_device "
			"c%db%dt%dl%d failed, device not added.\n",
			hostno, added[i].bus, added[i].target, added[i].lun);
		/* now we have to remove it from ccissscsi, */
		/* since it didn't get added to scsi mid layer */
		fixup_botched_add(h, added[i].scsi3addr);
	}

free_and_out:
	kfree(added);
	kfree(removed);
	return 0;
}

static int
lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr)
{
	int i;
	struct cciss_scsi_dev_t *sd;
	unsigned long flags;

	CPQ_TAPE_LOCK(h, flags);
	for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
		sd = &ccissscsi[h->ctlr].dev[i];
		if (sd->bus == bus &&
		    sd->target == target &&
		    sd->lun == lun) {
			memcpy(scsi3addr, &sd->scsi3addr[0], 8);
			CPQ_TAPE_UNLOCK(h, flags);
			return 0;
		}
	}
	CPQ_TAPE_UNLOCK(h, flags);
	return -1;
}

static void 
cciss_scsi_setup(ctlr_info_t *h)
{
	struct cciss_scsi_adapter_data_t * shba;

	ccissscsi[h->ctlr].ndevices = 0;
	shba = (struct cciss_scsi_adapter_data_t *)
		kmalloc(sizeof(*shba), GFP_KERNEL);	
	if (shba == NULL)
		return;
	shba->scsi_host = NULL;
	spin_lock_init(&shba->lock);
	shba->registered = 0;
	if (scsi_cmd_stack_setup(h, shba) != 0) {
		kfree(shba);
		shba = NULL;
	}
	h->scsi_ctlr = shba;
	return;
}

static void complete_scsi_command(CommandList_struct *c, int timeout,
	__u32 tag)
{
	struct scsi_cmnd *cmd;
	ctlr_info_t *h;
	ErrorInfo_struct *ei;

	ei = c->err_info;

	/* First, see if it was a message rather than a command */
	if (c->Request.Type.Type == TYPE_MSG)  {
		c->cmd_type = CMD_MSG_DONE;
		return;
	}

	cmd = (struct scsi_cmnd *) c->scsi_cmd;
	h = hba[c->ctlr];

	scsi_dma_unmap(cmd);
	if (c->Header.SGTotal > h->max_cmd_sgentries)
		cciss_unmap_sg_chain_block(h, c);

	cmd->result = (DID_OK << 16); 		/* host byte */
	cmd->result |= (COMMAND_COMPLETE << 8);	/* msg byte */
	/* cmd->result |= (GOOD < 1); */		/* status byte */

	cmd->result |= (ei->ScsiStatus);
	/* printk("Scsistatus is 0x%02x\n", ei->ScsiStatus);  */

	/* copy the sense data whether we need to or not. */

	memcpy(cmd->sense_buffer, ei->SenseInfo, 
		ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
			SCSI_SENSE_BUFFERSIZE : 
			ei->SenseLen);
	scsi_set_resid(cmd, ei->ResidualCnt);

	if(ei->CommandStatus != 0) 
	{ /* an error has occurred */ 
		switch(ei->CommandStatus)
		{
			case CMD_TARGET_STATUS:
				/* Pass it up to the upper layers... */
				if (!ei->ScsiStatus) {
					
	/* Ordinarily, this case should never happen, but there is a bug
	   in some released firmware revisions that allows it to happen
	   if, for example, a 4100 backplane loses power and the tape
	   drive is in it.  We assume that it's a fatal error of some
	   kind because we can't show that it wasn't. We will make it
	   look like selection timeout since that is the most common
	   reason for this to occur, and it's severe enough. */

					cmd->result = DID_NO_CONNECT << 16;
				}
			break;
			case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
			break;
			case CMD_DATA_OVERRUN:
				dev_warn(&h->pdev->dev, "%p has"
					" completed with data overrun "
					"reported\n", c);
			break;
			case CMD_INVALID: {
				/* print_bytes(c, sizeof(*c), 1, 0);
				print_cmd(c); */
     /* We get CMD_INVALID if you address a non-existent tape drive instead
	of a selection timeout (no response).  You will see this if you yank 
	out a tape drive, then try to access it. This is kind of a shame
	because it means that any other CMD_INVALID (e.g. driver bug) will
	get interpreted as a missing target. */
				cmd->result = DID_NO_CONNECT << 16;
				}
			break;
			case CMD_PROTOCOL_ERR:
				cmd->result = DID_ERROR << 16;
				dev_warn(&h->pdev->dev,
					"%p has protocol error\n", c);
                        break;
			case CMD_HARDWARE_ERR:
				cmd->result = DID_ERROR << 16;
				dev_warn(&h->pdev->dev,
					"%p had hardware error\n", c);
                        break;
			case CMD_CONNECTION_LOST:
				cmd->result = DID_ERROR << 16;
				dev_warn(&h->pdev->dev,
					"%p had connection lost\n", c);
			break;
			case CMD_ABORTED:
				cmd->result = DID_ABORT << 16;
				dev_warn(&h->pdev->dev, "%p was aborted\n", c);
			break;
			case CMD_ABORT_FAILED:
				cmd->result = DID_ERROR << 16;
				dev_warn(&h->pdev->dev,
					"%p reports abort failed\n", c);
			break;
			case CMD_UNSOLICITED_ABORT:
				cmd->result = DID_ABORT << 16;
				dev_warn(&h->pdev->dev, "%p aborted due to an "
					"unsolicited abort\n", c);
			break;
			case CMD_TIMEOUT:
				cmd->result = DID_TIME_OUT << 16;
				dev_warn(&h->pdev->dev, "%p timedout\n", c);
			break;
			case CMD_UNABORTABLE:
				cmd->result = DID_ERROR << 16;
				dev_warn(&h->pdev->dev, "c %p command "
					"unabortable\n", c);
			break;
			default:
				cmd->result = DID_ERROR << 16;
				dev_warn(&h->pdev->dev,
					"%p returned unknown status %x\n", c,
						ei->CommandStatus); 
		}
	}
	cmd->scsi_done(cmd);
	scsi_cmd_free(h, c);
}

static int
cciss_scsi_detect(ctlr_info_t *h)
{
	struct Scsi_Host *sh;
	int error;

	sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *));
	if (sh == NULL)
		goto fail;
	sh->io_port = 0;	// good enough?  FIXME, 
	sh->n_io_port = 0;	// I don't think we use these two...
	sh->this_id = SELF_SCSI_ID;  
	sh->can_queue = cciss_tape_cmds;
	sh->sg_tablesize = h->maxsgentries;
	sh->max_cmd_len = MAX_COMMAND_SIZE;
	sh->max_sectors = h->cciss_max_sectors;

	((struct cciss_scsi_adapter_data_t *) 
		h->scsi_ctlr)->scsi_host = sh;
	sh->hostdata[0] = (unsigned long) h;
	sh->irq = h->intr[SIMPLE_MODE_INT];
	sh->unique_id = sh->irq;
	error = scsi_add_host(sh, &h->pdev->dev);
	if (error)
		goto fail_host_put;
	scsi_scan_host(sh);
	return 1;

 fail_host_put:
	scsi_host_put(sh);
 fail:
	return 0;
}

static void
cciss_unmap_one(struct pci_dev *pdev,
		CommandList_struct *c,
		size_t buflen,
		int data_direction)
{
	u64bit addr64;

	addr64.val32.lower = c->SG[0].Addr.lower;
	addr64.val32.upper = c->SG[0].Addr.upper;
	pci_unmap_single(pdev, (dma_addr_t) addr64.val, buflen, data_direction);
}

static void
cciss_map_one(struct pci_dev *pdev,
		CommandList_struct *c,
		unsigned char *buf,
		size_t buflen,
		int data_direction)
{
	__u64 addr64;

	addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
	c->SG[0].Addr.lower =
	  (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
	c->SG[0].Addr.upper =
	  (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
	c->SG[0].Len = buflen;
	c->Header.SGList = (__u8) 1;   /* no. SGs contig in this cmd */
	c->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
}

static int
cciss_scsi_do_simple_cmd(ctlr_info_t *h,
			CommandList_struct *c,
			unsigned char *scsi3addr, 
			unsigned char *cdb,
			unsigned char cdblen,
			unsigned char *buf, int bufsize,
			int direction)
{
	DECLARE_COMPLETION_ONSTACK(wait);

	c->cmd_type = CMD_IOCTL_PEND; /* treat this like an ioctl */
	c->scsi_cmd = NULL;
	c->Header.ReplyQueue = 0;  /* unused in simple mode */
	memcpy(&c->Header.LUN, scsi3addr, sizeof(c->Header.LUN));
	c->Header.Tag.lower = c->busaddr;  /* Use k. address of cmd as tag */
	// Fill in the request block...

	/* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n", 
		scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
		scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */

	memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
	memcpy(c->Request.CDB, cdb, cdblen);
	c->Request.Timeout = 0;
	c->Request.CDBLen = cdblen;
	c->Request.Type.Type = TYPE_CMD;
	c->Request.Type.Attribute = ATTR_SIMPLE;
	c->Request.Type.Direction = direction;

	/* Fill in the SG list and do dma mapping */
	cciss_map_one(h->pdev, c, (unsigned char *) buf,
			bufsize, DMA_FROM_DEVICE); 

	c->waiting = &wait;
	enqueue_cmd_and_start_io(h, c);
	wait_for_completion(&wait);

	/* undo the dma mapping */
	cciss_unmap_one(h->pdev, c, bufsize, DMA_FROM_DEVICE);
	return(0);
}

static void 
cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
{
	ErrorInfo_struct *ei;

	ei = c->err_info;
	switch(ei->CommandStatus)
	{
		case CMD_TARGET_STATUS:
			dev_warn(&h->pdev->dev,
				"cmd %p has completed with errors\n", c);
			dev_warn(&h->pdev->dev,
				"cmd %p has SCSI Status = %x\n",
				c, ei->ScsiStatus);
			if (ei->ScsiStatus == 0)
				dev_warn(&h->pdev->dev,
				"SCSI status is abnormally zero.  "
				"(probably indicates selection timeout "
				"reported incorrectly due to a known "
				"firmware bug, circa July, 2001.)\n");
		break;
		case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
			dev_info(&h->pdev->dev, "UNDERRUN\n");
		break;
		case CMD_DATA_OVERRUN:
			dev_warn(&h->pdev->dev, "%p has"
				" completed with data overrun "
				"reported\n", c);
		break;
		case CMD_INVALID: {
			/* controller unfortunately reports SCSI passthru's */
			/* to non-existent targets as invalid commands. */
			dev_warn(&h->pdev->dev,
				"%p is reported invalid (probably means "
				"target device no longer present)\n", c);
			/* print_bytes((unsigned char *) c, sizeof(*c), 1, 0);
			print_cmd(c);  */
			}
		break;
		case CMD_PROTOCOL_ERR:
			dev_warn(&h->pdev->dev, "%p has protocol error\n", c);
		break;
		case CMD_HARDWARE_ERR:
			/* cmd->result = DID_ERROR << 16; */
			dev_warn(&h->pdev->dev, "%p had hardware error\n", c);
		break;
		case CMD_CONNECTION_LOST:
			dev_warn(&h->pdev->dev, "%p had connection lost\n", c);
		break;
		case CMD_ABORTED:
			dev_warn(&h->pdev->dev, "%p was aborted\n", c);
		break;
		case CMD_ABORT_FAILED:
			dev_warn(&h->pdev->dev,
				"%p reports abort failed\n", c);
		break;
		case CMD_UNSOLICITED_ABORT:
			dev_warn(&h->pdev->dev,
				"%p aborted due to an unsolicited abort\n", c);
		break;
		case CMD_TIMEOUT:
			dev_warn(&h->pdev->dev, "%p timedout\n", c);
		break;
		case CMD_UNABORTABLE:
			dev_warn(&h->pdev->dev,
				"%p unabortable\n", c);
		break;
		default:
			dev_warn(&h->pdev->dev,
				"%p returned unknown status %x\n",
				c, ei->CommandStatus);
	}
}

static int
cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
	unsigned char page, unsigned char *buf,
	unsigned char bufsize)
{
	int rc;
	CommandList_struct *c;
	char cdb[6];
	ErrorInfo_struct *ei;
	unsigned long flags;

	spin_lock_irqsave(&h->lock, flags);
	c = scsi_cmd_alloc(h);
	spin_unlock_irqrestore(&h->lock, flags);

	if (c == NULL) {			/* trouble... */
		printk("cmd_alloc returned NULL!\n");
		return -1;
	}

	ei = c->err_info;

	cdb[0] = CISS_INQUIRY;
	cdb[1] = (page != 0);
	cdb[2] = page;
	cdb[3] = 0;
	cdb[4] = bufsize;
	cdb[5] = 0;
	rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, cdb,
				6, buf, bufsize, XFER_READ);

	if (rc != 0) return rc; /* something went wrong */

	if (ei->CommandStatus != 0 && 
	    ei->CommandStatus != CMD_DATA_UNDERRUN) {
		cciss_scsi_interpret_error(h, c);
		rc = -1;
	}
	spin_lock_irqsave(&h->lock, flags);
	scsi_cmd_free(h, c);
	spin_unlock_irqrestore(&h->lock, flags);
	return rc;	
}

/* Get the device id from inquiry page 0x83 */
static int cciss_scsi_get_device_id(ctlr_info_t *h, unsigned char *scsi3addr,
	unsigned char *device_id, int buflen)
{
	int rc;
	unsigned char *buf;

	if (buflen > 16)
		buflen = 16;
	buf = kzalloc(64, GFP_KERNEL);
	if (!buf)
		return -1;
	rc = cciss_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
	if (rc == 0)
		memcpy(device_id, &buf[8], buflen);
	kfree(buf);
	return rc != 0;
}

static int
cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
		ReportLunData_struct *buf, int bufsize)
{
	int rc;
	CommandList_struct *c;
	unsigned char cdb[12];
	unsigned char scsi3addr[8]; 
	ErrorInfo_struct *ei;
	unsigned long flags;

	spin_lock_irqsave(&h->lock, flags);
	c = scsi_cmd_alloc(h);
	spin_unlock_irqrestore(&h->lock, flags);
	if (c == NULL) {			/* trouble... */
		printk("cmd_alloc returned NULL!\n");
		return -1;
	}

	memset(&scsi3addr[0], 0, 8); /* address the controller */
	cdb[0] = CISS_REPORT_PHYS;
	cdb[1] = 0;
	cdb[2] = 0;
	cdb[3] = 0;
	cdb[4] = 0;
	cdb[5] = 0;
	cdb[6] = (bufsize >> 24) & 0xFF;  //MSB
	cdb[7] = (bufsize >> 16) & 0xFF;
	cdb[8] = (bufsize >> 8) & 0xFF;
	cdb[9] = bufsize & 0xFF;
	cdb[10] = 0;
	cdb[11] = 0;

	rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr,
				cdb, 12, 
				(unsigned char *) buf, 
				bufsize, XFER_READ);

	if (rc != 0) return rc; /* something went wrong */

	ei = c->err_info;
	if (ei->CommandStatus != 0 && 
	    ei->CommandStatus != CMD_DATA_UNDERRUN) {
		cciss_scsi_interpret_error(h, c);
		rc = -1;
	}
	spin_lock_irqsave(&h->lock, flags);
	scsi_cmd_free(h, c);
	spin_unlock_irqrestore(&h->lock, flags);
	return rc;	
}

static void
cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
{
	/* the idea here is we could get notified from /proc
	   that some devices have changed, so we do a report 
	   physical luns cmd, and adjust our list of devices 
	   accordingly.  (We can't rely on the scsi-mid layer just
	   doing inquiries, because the "busses" that the scsi 
	   mid-layer probes are totally fabricated by this driver,
	   so new devices wouldn't show up.

	   the scsi3addr's of devices won't change so long as the 
	   adapter is not reset.  That means we can rescan and 
	   tell which devices we already know about, vs. new 
	   devices, vs.  disappearing devices.

	   Also, if you yank out a tape drive, then put in a disk
	   in it's place, (say, a configured volume from another 
	   array controller for instance)  _don't_ poke this driver 
           (so it thinks it's still a tape, but _do_ poke the scsi 
           mid layer, so it does an inquiry... the scsi mid layer 
           will see the physical disk.  This would be bad.  Need to
	   think about how to prevent that.  One idea would be to 
	   snoop all scsi responses and if an inquiry repsonse comes
	   back that reports a disk, chuck it an return selection
	   timeout instead and adjust our table...  Not sure i like
	   that though.  

	 */
#define OBDR_TAPE_INQ_SIZE 49
#define OBDR_TAPE_SIG "$DR-10"
	ReportLunData_struct *ld_buff;
	unsigned char *inq_buff;
	unsigned char scsi3addr[8];
	__u32 num_luns=0;
	unsigned char *ch;
	struct cciss_scsi_dev_t *currentsd, *this_device;
	int ncurrent=0;
	int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
	int i;

	ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
	inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
	currentsd = kzalloc(sizeof(*currentsd) *
			(CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL);
	if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) {
		printk(KERN_ERR "cciss: out of memory\n");
		goto out;
	}
	this_device = &currentsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
	if (cciss_scsi_do_report_phys_luns(h, ld_buff, reportlunsize) == 0) {
		ch = &ld_buff->LUNListLength[0];
		num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
		if (num_luns > CISS_MAX_PHYS_LUN) {
			printk(KERN_WARNING 
				"cciss: Maximum physical LUNs (%d) exceeded.  "
				"%d LUNs ignored.\n", CISS_MAX_PHYS_LUN, 
				num_luns - CISS_MAX_PHYS_LUN);
			num_luns = CISS_MAX_PHYS_LUN;
		}
	}
	else {
		printk(KERN_ERR  "cciss: Report physical LUNs failed.\n");
		goto out;
	}


	/* adjust our table of devices */	
	for (i = 0; i < num_luns; i++) {
		/* for each physical lun, do an inquiry */
		if (ld_buff->LUN[i][3] & 0xC0) continue;
		memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
		memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);

		if (cciss_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
			(unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
			/* Inquiry failed (msg printed already) */
			continue; /* so we will skip this device. */

		this_device->devtype = (inq_buff[0] & 0x1f);
		this_device->bus = -1;
		this_device->target = -1;
		this_device->lun = -1;
		memcpy(this_device->scsi3addr, scsi3addr, 8);
		memcpy(this_device->vendor, &inq_buff[8],
			sizeof(this_device->vendor));
		memcpy(this_device->model, &inq_buff[16],
			sizeof(this_device->model));
		memcpy(this_device->revision, &inq_buff[32],
			sizeof(this_device->revision));
		memset(this_device->device_id, 0,
			sizeof(this_device->device_id));
		cciss_scsi_get_device_id(h, scsi3addr,
			this_device->device_id, sizeof(this_device->device_id));

		switch (this_device->devtype)
		{
		  case 0x05: /* CD-ROM */ {

			/* We don't *really* support actual CD-ROM devices,
			 * just this "One Button Disaster Recovery" tape drive
			 * which temporarily pretends to be a CD-ROM drive.
			 * So we check that the device is really an OBDR tape
			 * device by checking for "$DR-10" in bytes 43-48 of
			 * the inquiry data.
			 */
				char obdr_sig[7];

				strncpy(obdr_sig, &inq_buff[43], 6);
				obdr_sig[6] = '\0';
				if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
					/* Not OBDR device, ignore it. */
					break;
			}
			/* fall through . . . */
		  case 0x01: /* sequential access, (tape) */
		  case 0x08: /* medium changer */
			if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
				printk(KERN_INFO "cciss%d: %s ignored, "
					"too many devices.\n", h->ctlr,
					scsi_device_type(this_device->devtype));
				break;
			}
			currentsd[ncurrent] = *this_device;
			ncurrent++;
			break;
		  default: 
			break;
		}
	}

	adjust_cciss_scsi_table(h, hostno, currentsd, ncurrent);
out:
	kfree(inq_buff);
	kfree(ld_buff);
	kfree(currentsd);
	return;
}

static int
is_keyword(char *ptr, int len, char *verb)  // Thanks to ncr53c8xx.c
{
	int verb_len = strlen(verb);
	if (len >= verb_len && !memcmp(verb,ptr,verb_len))
		return verb_len;
	else
		return 0;
}

static int
cciss_scsi_user_command(ctlr_info_t *h, int hostno, char *buffer, int length)
{
	int arg_len;

	if ((arg_len = is_keyword(buffer, length, "rescan")) != 0)
		cciss_update_non_disk_devices(h, hostno);
	else
		return -EINVAL;
	return length;
}

static int
cciss_scsi_write_info(struct Scsi_Host *sh,
		char *buffer, /* data buffer */
		int length) 	   /* length of data in buffer */
{
	ctlr_info_t *h = (ctlr_info_t *) sh->hostdata[0];
	if (h == NULL)  /* This really shouldn't ever happen. */
		return -EINVAL;

	return cciss_scsi_user_command(h, sh->host_no,
			buffer, length);	
} 

static int
cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh)
{

	ctlr_info_t *h = (ctlr_info_t *) sh->hostdata[0];
	int i;

	if (h == NULL)  /* This really shouldn't ever happen. */
		return -EINVAL;

	seq_printf(m, "cciss%d: SCSI host: %d\n",
			h->ctlr, sh->host_no);

	/* this information is needed by apps to know which cciss
	   device corresponds to which scsi host number without
	   having to open a scsi target device node.  The device
	   information is not a duplicate of /proc/scsi/scsi because
	   the two may be out of sync due to scsi hotplug, rather
	   this info is for an app to be able to use to know how to
	   get them back in sync. */

	for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
		struct cciss_scsi_dev_t *sd =
			&ccissscsi[h->ctlr].dev[i];
		seq_printf(m, "c%db%dt%dl%d %02d "
			"0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
			sh->host_no, sd->bus, sd->target, sd->lun,
			sd->devtype,
			sd->scsi3addr[0], sd->scsi3addr[1],
			sd->scsi3addr[2], sd->scsi3addr[3],
			sd->scsi3addr[4], sd->scsi3addr[5],
			sd->scsi3addr[6], sd->scsi3addr[7]);
	}
	return 0;
}

/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci 
   dma mapping  and fills in the scatter gather entries of the 
   cciss command, c. */

static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
	struct scsi_cmnd *cmd)
{
	unsigned int len;
	struct scatterlist *sg;
	__u64 addr64;
	int request_nsgs, i, chained, sg_index;
	struct cciss_scsi_adapter_data_t *sa = h->scsi_ctlr;
	SGDescriptor_struct *curr_sg;

	BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);

	chained = 0;
	sg_index = 0;
	curr_sg = c->SG;
	request_nsgs = scsi_dma_map(cmd);
	if (request_nsgs) {
		scsi_for_each_sg(cmd, sg, request_nsgs, i) {
			if (sg_index + 1 == h->max_cmd_sgentries &&
				!chained && request_nsgs - i > 1) {
				chained = 1;
				sg_index = 0;
				curr_sg = sa->cmd_sg_list[c->cmdindex];
			}
			addr64 = (__u64) sg_dma_address(sg);
			len  = sg_dma_len(sg);
			curr_sg[sg_index].Addr.lower =
				(__u32) (addr64 & 0x0FFFFFFFFULL);
			curr_sg[sg_index].Addr.upper =
				(__u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
			curr_sg[sg_index].Len = len;
			curr_sg[sg_index].Ext = 0;
			++sg_index;
		}
		if (chained)
			cciss_map_sg_chain_block(h, c,
				sa->cmd_sg_list[c->cmdindex],
				(request_nsgs - (h->max_cmd_sgentries - 1)) *
					sizeof(SGDescriptor_struct));
	}
	/* track how many SG entries we are using */
	if (request_nsgs > h->maxSG)
		h->maxSG = request_nsgs;
	c->Header.SGTotal = (u16) request_nsgs + chained;
	if (request_nsgs > h->max_cmd_sgentries)
		c->Header.SGList = h->max_cmd_sgentries;
	else
		c->Header.SGList = c->Header.SGTotal;
	return;
}


static int
cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
	ctlr_info_t *h;
	int rc;
	unsigned char scsi3addr[8];
	CommandList_struct *c;
	unsigned long flags;

	// Get the ptr to our adapter structure (hba[i]) out of cmd->host.
	// We violate cmd->host privacy here.  (Is there another way?)
	h = (ctlr_info_t *) cmd->device->host->hostdata[0];

	rc = lookup_scsi3addr(h, cmd->device->channel, cmd->device->id,
			cmd->device->lun, scsi3addr);
	if (rc != 0) {
		/* the scsi nexus does not match any that we presented... */
		/* pretend to mid layer that we got selection timeout */
		cmd->result = DID_NO_CONNECT << 16;
		done(cmd);
		/* we might want to think about registering controller itself
		   as a processor device on the bus so sg binds to it. */
		return 0;
	}

	/* Ok, we have a reasonable scsi nexus, so send the cmd down, and
           see what the device thinks of it. */

	spin_lock_irqsave(&h->lock, flags);
	c = scsi_cmd_alloc(h);
	spin_unlock_irqrestore(&h->lock, flags);
	if (c == NULL) {			/* trouble... */
		dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n");
		/* FIXME: next 3 lines are -> BAD! <- */
		cmd->result = DID_NO_CONNECT << 16;
		done(cmd);
		return 0;
	}

	// Fill in the command list header

	cmd->scsi_done = done;    // save this for use by completion code 

	/* save c in case we have to abort it */
	cmd->host_scribble = (unsigned char *) c;

	c->cmd_type = CMD_SCSI;
	c->scsi_cmd = cmd;
	c->Header.ReplyQueue = 0;  /* unused in simple mode */
	memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
	c->Header.Tag.lower = c->busaddr;  /* Use k. address of cmd as tag */
	
	// Fill in the request block...

	c->Request.Timeout = 0;
	memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
	BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
	c->Request.CDBLen = cmd->cmd_len;
	memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
	c->Request.Type.Type = TYPE_CMD;
	c->Request.Type.Attribute = ATTR_SIMPLE;
	switch(cmd->sc_data_direction)
	{
	  case DMA_TO_DEVICE:
		c->Request.Type.Direction = XFER_WRITE;
		break;
	  case DMA_FROM_DEVICE:
		c->Request.Type.Direction = XFER_READ;
		break;
	  case DMA_NONE:
		c->Request.Type.Direction = XFER_NONE;
		break;
	  case DMA_BIDIRECTIONAL:
		// This can happen if a buggy application does a scsi passthru
		// and sets both inlen and outlen to non-zero. ( see
		// ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )

		c->Request.Type.Direction = XFER_RSVD;
		// This is technically wrong, and cciss controllers should
		// reject it with CMD_INVALID, which is the most correct 
		// response, but non-fibre backends appear to let it 
		// slide by, and give the same results as if this field
		// were set correctly.  Either way is acceptable for
		// our purposes here.

		break;

	  default: 
		dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
			cmd->sc_data_direction);
		BUG();
		break;
	}
	cciss_scatter_gather(h, c, cmd);
	enqueue_cmd_and_start_io(h, c);
	/* the cmd'll come back via intr handler in complete_scsi_command()  */
	return 0;
}

static DEF_SCSI_QCMD(cciss_scsi_queue_command)

static void cciss_unregister_scsi(ctlr_info_t *h)
{
	struct cciss_scsi_adapter_data_t *sa;
	struct cciss_scsi_cmd_stack_t *stk;
	unsigned long flags;

	/* we are being forcibly unloaded, and may not refuse. */

	spin_lock_irqsave(&h->lock, flags);
	sa = h->scsi_ctlr;
	stk = &sa->cmd_stack; 

	/* if we weren't ever actually registered, don't unregister */ 
	if (sa->registered) {
		spin_unlock_irqrestore(&h->lock, flags);
		scsi_remove_host(sa->scsi_host);
		scsi_host_put(sa->scsi_host);
		spin_lock_irqsave(&h->lock, flags);
	}

	/* set scsi_host to NULL so our detect routine will 
	   find us on register */
	sa->scsi_host = NULL;
	spin_unlock_irqrestore(&h->lock, flags);
	scsi_cmd_stack_free(h);
	kfree(sa);
}

static int cciss_engage_scsi(ctlr_info_t *h)
{
	struct cciss_scsi_adapter_data_t *sa;
	struct cciss_scsi_cmd_stack_t *stk;
	unsigned long flags;

	spin_lock_irqsave(&h->lock, flags);
	sa = h->scsi_ctlr;
	stk = &sa->cmd_stack; 

	if (sa->registered) {
		dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
		spin_unlock_irqrestore(&h->lock, flags);
		return -ENXIO;
	}
	sa->registered = 1;
	spin_unlock_irqrestore(&h->lock, flags);
	cciss_update_non_disk_devices(h, -1);
	cciss_scsi_detect(h);
	return 0;
}

static void
cciss_seq_tape_report(struct seq_file *seq, ctlr_info_t *h)
{
	unsigned long flags;

	CPQ_TAPE_LOCK(h, flags);
	seq_printf(seq,
		"Sequential access devices: %d\n\n",
			ccissscsi[h->ctlr].ndevices);
	CPQ_TAPE_UNLOCK(h, flags);
}

static int wait_for_device_to_become_ready(ctlr_info_t *h,
	unsigned char lunaddr[])
{
	int rc;
	int count = 0;
	int waittime = HZ;
	CommandList_struct *c;

	c = cmd_alloc(h);
	if (!c) {
		dev_warn(&h->pdev->dev, "out of memory in "
			"wait_for_device_to_become_ready.\n");
		return IO_ERROR;
	}

	/* Send test unit ready until device ready, or give up. */
	while (count < 20) {

		/* Wait for a bit.  do this first, because if we send
		 * the TUR right away, the reset will just abort it.
		 */
		schedule_timeout_uninterruptible(waittime);
		count++;

		/* Increase wait time with each try, up to a point. */
		if (waittime < (HZ * 30))
			waittime = waittime * 2;

		/* Send the Test Unit Ready */
		rc = fill_cmd(h, c, TEST_UNIT_READY, NULL, 0, 0,
			lunaddr, TYPE_CMD);
		if (rc == 0)
			rc = sendcmd_withirq_core(h, c, 0);

		(void) process_sendcmd_error(h, c);

		if (rc != 0)
			goto retry_tur;

		if (c->err_info->CommandStatus == CMD_SUCCESS)
			break;

		if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
			c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
			if (c->err_info->SenseInfo[2] == NO_SENSE)
				break;
			if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) {
				unsigned char asc;
				asc = c->err_info->SenseInfo[12];
				check_for_unit_attention(h, c);
				if (asc == POWER_OR_RESET)
					break;
			}
		}
retry_tur:
		dev_warn(&h->pdev->dev, "Waiting %d secs "
			"for device to become ready.\n",
			waittime / HZ);
		rc = 1; /* device not ready. */
	}

	if (rc)
		dev_warn(&h->pdev->dev, "giving up on device.\n");
	else
		dev_warn(&h->pdev->dev, "device is ready.\n");

	cmd_free(h, c);
	return rc;
}

/* Need at least one of these error handlers to keep ../scsi/hosts.c from 
 * complaining.  Doing a host- or bus-reset can't do anything good here. 
 * Despite what it might say in scsi_error.c, there may well be commands
 * on the controller, as the cciss driver registers twice, once as a block
 * device for the logical drives, and once as a scsi device, for any tape
 * drives.  So we know there are no commands out on the tape drives, but we
 * don't know there are no commands on the controller, and it is likely 
 * that there probably are, as the cciss block device is most commonly used
 * as a boot device (embedded controller on HP/Compaq systems.)
*/

static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
{
	int rc;
	CommandList_struct *cmd_in_trouble;
	unsigned char lunaddr[8];
	ctlr_info_t *h;

	/* find the controller to which the command to be aborted was sent */
	h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
	if (h == NULL) /* paranoia */
		return FAILED;
	dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n");
	/* find the command that's giving us trouble */
	cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
	if (cmd_in_trouble == NULL) /* paranoia */
		return FAILED;
	memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
	/* send a reset to the SCSI LUN which the command was sent to */
	rc = sendcmd_withirq(h, CCISS_RESET_MSG, NULL, 0, 0, lunaddr,
		TYPE_MSG);
	if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
		return SUCCESS;
	dev_warn(&h->pdev->dev, "resetting device failed.\n");
	return FAILED;
}

static int  cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
{
	int rc;
	CommandList_struct *cmd_to_abort;
	unsigned char lunaddr[8];
	ctlr_info_t *h;

	/* find the controller to which the command to be aborted was sent */
	h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
	if (h == NULL) /* paranoia */
		return FAILED;
	dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n");

	/* find the command to be aborted */
	cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
	if (cmd_to_abort == NULL) /* paranoia */
		return FAILED;
	memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
	rc = sendcmd_withirq(h, CCISS_ABORT_MSG, &cmd_to_abort->Header.Tag,
		0, 0, lunaddr, TYPE_MSG);
	if (rc == 0)
		return SUCCESS;
	return FAILED;

}

#else /* no CONFIG_CISS_SCSI_TAPE */

/* If no tape support, then these become defined out of existence */

#define cciss_scsi_setup(cntl_num)
#define cciss_engage_scsi(h)

#endif /* CONFIG_CISS_SCSI_TAPE */