sb_ess.c 51.4 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832
#undef FKS_LOGGING
#undef FKS_TEST

/*
 * tabs should be 4 spaces, in vi(m): set tabstop=4
 *
 * TODO: 	consistency speed calculations!!
 *			cleanup!
 * ????:	Did I break MIDI support?
 *
 * History:
 *
 * Rolf Fokkens	 (Dec 20 1998):	ES188x recording level support on a per
 * fokkensr@vertis.nl			input basis.
 *				 (Dec 24 1998):	Recognition of ES1788, ES1887, ES1888,
 *								ES1868, ES1869 and ES1878. Could be used for
 *								specific handling in the future. All except
 *								ES1887 and ES1888 and ES688 are handled like
 *								ES1688.
 *				 (Dec 27 1998):	RECLEV for all (?) ES1688+ chips. ES188x now
 *								have the "Dec 20" support + RECLEV
 *				 (Jan  2 1999):	Preparation for Full Duplex. This means
 *								Audio 2 is now used for playback when dma16
 *								is specified. The next step would be to use
 *								Audio 1 and Audio 2 at the same time.
 *				 (Jan  9 1999):	Put all ESS stuff into sb_ess.[ch], this
 *								includes both the ESS stuff that has been in
 *								sb_*[ch] before I touched it and the ESS support
 *								I added later
 *				 (Jan 23 1999):	Full Duplex seems to work. I wrote a small
 *								test proggy which works OK. Haven't found
 *								any applications to test it though. So why did
 *								I bother to create it anyway?? :) Just for
 *								fun.
 *				 (May  2 1999):	I tried to be too smart by "introducing"
 *								ess_calc_best_speed (). The idea was that two
 *								dividers could be used to setup a samplerate,
 *								ess_calc_best_speed () would choose the best.
 *								This works for playback, but results in
 *								recording problems for high samplerates. I
 *								fixed this by removing ess_calc_best_speed ()
 *								and just doing what the documentation says. 
 * Andy Sloane   (Jun  4 1999): Stole some code from ALSA to fix the playback
 * andy@guildsoftware.com		speed on ES1869, ES1879, ES1887, and ES1888.
 * 								1879's were previously ignored by this driver;
 * 								added (untested) support for those.
 * Cvetan Ivanov (Oct 27 1999): Fixed ess_dsp_init to call ess_set_dma_hw for
 * zezo@inet.bg					_ALL_ ESS models, not only ES1887
 *
 * This files contains ESS chip specifics. It's based on the existing ESS
 * handling as it resided in sb_common.c, sb_mixer.c and sb_audio.c. This
 * file adds features like:
 * - Chip Identification (as shown in /proc/sound)
 * - RECLEV support for ES1688 and later
 * - 6 bits playback level support chips later than ES1688
 * - Recording level support on a per-device basis for ES1887
 * - Full-Duplex for ES1887
 *
 * Full duplex is enabled by specifying dma16. While the normal dma must
 * be one of 0, 1 or 3, dma16 can be one of 0, 1, 3 or 5. DMA 5 is a 16 bit
 * DMA channel, while the others are 8 bit..
 *
 * ESS detection isn't full proof (yet). If it fails an additional module
 * parameter esstype can be specified to be one of the following:
 * -1, 0, 688, 1688, 1868, 1869, 1788, 1887, 1888
 * -1 means: mimic 2.0 behaviour, 
 *  0 means: auto detect.
 *   others: explicitly specify chip
 * -1 is default, cause auto detect still doesn't work.
 */

/*
 * About the documentation
 *
 * I don't know if the chips all are OK, but the documentation is buggy. 'cause
 * I don't have all the cips myself, there's a lot I cannot verify. I'll try to
 * keep track of my latest insights about his here. If you have additional info,
 * please enlighten me (fokkensr@vertis.nl)!
 *
 * I had the impression that ES1688 also has 6 bit master volume control. The
 * documentation about ES1888 (rev C, october '95) claims that ES1888 has
 * the following features ES1688 doesn't have:
 * - 6 bit master volume
 * - Full Duplex
 * So ES1688 apparently doesn't have 6 bit master volume control, but the
 * ES1688 does have RECLEV control. Makes me wonder: does ES688 have it too?
 * Without RECLEV ES688 won't be much fun I guess.
 *
 * From the ES1888 (rev C, october '95) documentation I got the impression
 * that registers 0x68 to 0x6e don't exist which means: no recording volume
 * controls. To my surprise the ES888 documentation (1/14/96) claims that
 * ES888 does have these record mixer registers, but that ES1888 doesn't have
 * 0x69 and 0x6b. So the rest should be there.
 *
 * I'm trying to get ES1887 Full Duplex. Audio 2 is playback only, while Audio 2
 * is both record and playback. I think I should use Audio 2 for all playback.
 *
 * The documentation is an adventure: it's close but not fully accurate. I
 * found out that after a reset some registers are *NOT* reset, though the
 * docs say the would be. Interresting ones are 0x7f, 0x7d and 0x7a. They are
 * related to the Audio 2 channel. I also was suprised about the consequenses
 * of writing 0x00 to 0x7f (which should be done by reset): The ES1887 moves
 * into ES1888 mode. This means that it claims IRQ 11, which happens to be my
 * ISDN adapter. Needless to say it no longer worked. I now understand why
 * after rebooting 0x7f already was 0x05, the value of my choice: the BIOS
 * did it.
 *
 * Oh, and this is another trap: in ES1887 docs mixer register 0x70 is decribed
 * as if it's exactly the same as register 0xa1. This is *NOT* true. The
 * description of 0x70 in ES1869 docs is accurate however.
 * Well, the assumption about ES1869 was wrong: register 0x70 is very much
 * like register 0xa1, except that bit 7 is allways 1, whatever you want
 * it to be.
 *
 * When using audio 2 mixer register 0x72 seems te be meaningless. Only 0xa2
 * has effect.
 *
 * Software reset not being able to reset all registers is great! Especially
 * the fact that register 0x78 isn't reset is great when you wanna change back
 * to single dma operation (simplex): audio 2 is still operation, and uses the
 * same dma as audio 1: your ess changes into a funny echo machine.
 *
 * Received the new that ES1688 is detected as a ES1788. Did some thinking:
 * the ES1887 detection scheme suggests in step 2 to try if bit 3 of register
 * 0x64 can be changed. This is inaccurate, first I inverted the * check: "If
 * can be modified, it's a 1688", which lead to a correct detection
 * of my ES1887. It resulted however in bad detection of 1688 (reported by mail)
 * and 1868 (if no PnP detection first): they result in a 1788 being detected.
 * I don't have docs on 1688, but I do have docs on 1868: The documentation is
 * probably inaccurate in the fact that I should check bit 2, not bit 3. This
 * is what I do now.
 */

/*
 * About recognition of ESS chips
 *
 * The distinction of ES688, ES1688, ES1788, ES1887 and ES1888 is described in
 * a (preliminary ??) datasheet on ES1887. It's aim is to identify ES1887, but
 * during detection the text claims that "this chip may be ..." when a step
 * fails. This scheme is used to distinct between the above chips.
 * It appears however that some PnP chips like ES1868 are recognized as ES1788
 * by the ES1887 detection scheme. These PnP chips can be detected in another
 * way however: ES1868, ES1869 and ES1878 can be recognized (full proof I think)
 * by repeatedly reading mixer register 0x40. This is done by ess_identify in
 * sb_common.c.
 * This results in the following detection steps:
 * - distinct between ES688 and ES1688+ (as always done in this driver)
 *   if ES688 we're ready
 * - try to detect ES1868, ES1869 or ES1878
 *   if successful we're ready
 * - try to detect ES1888, ES1887 or ES1788
 *   if successful we're ready
 * - Dunno. Must be 1688. Will do in general
 *
 * About RECLEV support:
 *
 * The existing ES1688 support didn't take care of the ES1688+ recording
 * levels very well. Whenever a device was selected (recmask) for recording
 * it's recording level was loud, and it couldn't be changed. The fact that
 * internal register 0xb4 could take care of RECLEV, didn't work meaning until
 * it's value was restored every time the chip was reset; this reset the
 * value of 0xb4 too. I guess that's what 4front also had (have?) trouble with.
 *
 * About ES1887 support:
 *
 * The ES1887 has separate registers to control the recording levels, for all
 * inputs. The ES1887 specific software makes these levels the same as their
 * corresponding playback levels, unless recmask says they aren't recorded. In
 * the latter case the recording volumes are 0.
 * Now recording levels of inputs can be controlled, by changing the playback
 * levels. Futhermore several devices can be recorded together (which is not
 * possible with the ES1688.
 * Besides the separate recording level control for each input, the common
 * recordig level can also be controlled by RECLEV as described above.
 *
 * Not only ES1887 have this recording mixer. I know the following from the
 * documentation:
 * ES688	no
 * ES1688	no
 * ES1868	no
 * ES1869	yes
 * ES1878	no
 * ES1879	yes
 * ES1888	no/yes	Contradicting documentation; most recent: yes
 * ES1946	yes		This is a PCI chip; not handled by this driver
 */

#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>

#include "sound_config.h"
#include "sb_mixer.h"
#include "sb.h"

#include "sb_ess.h"

#define ESSTYPE_LIKE20	-1		/* Mimic 2.0 behaviour					*/
#define ESSTYPE_DETECT	0		/* Mimic 2.0 behaviour					*/

#define SUBMDL_ES1788	0x10	/* Subtype ES1788 for specific handling */
#define SUBMDL_ES1868	0x11	/* Subtype ES1868 for specific handling */
#define SUBMDL_ES1869	0x12	/* Subtype ES1869 for specific handling */
#define SUBMDL_ES1878	0x13	/* Subtype ES1878 for specific handling */
#define SUBMDL_ES1879	0x16    /* ES1879 was initially forgotten */
#define SUBMDL_ES1887	0x14	/* Subtype ES1887 for specific handling */
#define SUBMDL_ES1888	0x15	/* Subtype ES1888 for specific handling */

#define SB_CAP_ES18XX_RATE 0x100

#define ES1688_CLOCK1 795444 /* 128 - div */
#define ES1688_CLOCK2 397722 /* 256 - div */
#define ES18XX_CLOCK1 793800 /* 128 - div */
#define ES18XX_CLOCK2 768000 /* 256 - div */

#ifdef FKS_LOGGING
static void ess_show_mixerregs (sb_devc *devc);
#endif
static int ess_read (sb_devc * devc, unsigned char reg);
static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data);
static void ess_chgmixer
	(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val);

/****************************************************************************
 *																			*
 *									ESS audio								*
 *																			*
 ****************************************************************************/

struct ess_command {short cmd; short data;};

/*
 * Commands for initializing Audio 1 for input (record)
 */
static struct ess_command ess_i08m[] =		/* input 8 bit mono */
	{ {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} };
static struct ess_command ess_i16m[] =		/* input 16 bit mono */
	{ {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} };
static struct ess_command ess_i08s[] =		/* input 8 bit stereo */
	{ {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} };
static struct ess_command ess_i16s[] =		/* input 16 bit stereo */
	{ {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} };

static struct ess_command *ess_inp_cmds[] =
	{ ess_i08m, ess_i16m, ess_i08s, ess_i16s };


/*
 * Commands for initializing Audio 1 for output (playback)
 */
static struct ess_command ess_o08m[] =		/* output 8 bit mono */
	{ {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} };
static struct ess_command ess_o16m[] =		/* output 16 bit mono */
	{ {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} };
static struct ess_command ess_o08s[] =		/* output 8 bit stereo */
	{ {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} };
static struct ess_command ess_o16s[] =		/* output 16 bit stereo */
	{ {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} };

static struct ess_command *ess_out_cmds[] =
	{ ess_o08m, ess_o16m, ess_o08s, ess_o16s };

static void ess_exec_commands
	(sb_devc *devc, struct ess_command *cmdtab[])
{
	struct ess_command *cmd;

	cmd = cmdtab [ ((devc->channels != 1) << 1) + (devc->bits != AFMT_U8) ];

	while (cmd->cmd != -1) {
		ess_write (devc, cmd->cmd, cmd->data);
		cmd++;
	}
}

static void ess_change
	(sb_devc *devc, unsigned int reg, unsigned int mask, unsigned int val)
{
	int value;

	value = ess_read (devc, reg);
	value = (value & ~mask) | (val & mask);
	ess_write (devc, reg, value);
}

static void ess_set_output_parms
	(int dev, unsigned long buf, int nr_bytes, int intrflag)
{
	sb_devc *devc = audio_devs[dev]->devc;

	if (devc->duplex) {
		devc->trg_buf_16 = buf;
		devc->trg_bytes_16 = nr_bytes;
		devc->trg_intrflag_16 = intrflag;
		devc->irq_mode_16 = IMODE_OUTPUT;
	} else {
		devc->trg_buf = buf;
		devc->trg_bytes = nr_bytes;
		devc->trg_intrflag = intrflag;
		devc->irq_mode = IMODE_OUTPUT;
	}
}

static void ess_set_input_parms
	(int dev, unsigned long buf, int count, int intrflag)
{
	sb_devc *devc = audio_devs[dev]->devc;

	devc->trg_buf = buf;
	devc->trg_bytes = count;
	devc->trg_intrflag = intrflag;
	devc->irq_mode = IMODE_INPUT;
}

static int ess_calc_div (int clock, int revert, int *speedp, int *diffp)
{
	int divider;
	int speed, diff;
	int retval;

	speed   = *speedp;
	divider = (clock + speed / 2) / speed;
	retval  = revert - divider;
	if (retval > revert - 1) {
		retval  = revert - 1;
		divider = revert - retval;
	}
	/* This line is suggested. Must be wrong I think
	*speedp = (clock + divider / 2) / divider;
	So I chose the next one */

	*speedp	= clock / divider;
	diff	= speed - *speedp;
	if (diff < 0) diff =-diff;
	*diffp  = diff;

	return retval;
}

static int ess_calc_best_speed
	(int clock1, int rev1, int clock2, int rev2, int *divp, int *speedp)
{
	int speed1 = *speedp, speed2 = *speedp;
	int div1, div2;
	int diff1, diff2;
	int retval;

	div1 = ess_calc_div (clock1, rev1, &speed1, &diff1);
	div2 = ess_calc_div (clock2, rev2, &speed2, &diff2);

	if (diff1 < diff2) {
		*divp   = div1;
		*speedp = speed1;
		retval  = 1;
	} else {
	/*	*divp   = div2; */
		*divp   = 0x80 | div2;
		*speedp = speed2;
		retval  = 2;
	}

	return retval;
}

/*
 * Depending on the audiochannel ESS devices can
 * have different clock settings. These are made consistent for duplex
 * however.
 * callers of ess_speed only do an audionum suggestion, which means
 * input suggests 1, output suggests 2. This suggestion is only true
 * however when doing duplex.
 */
static void ess_common_speed (sb_devc *devc, int *speedp, int *divp)
{
	int diff = 0, div;

	if (devc->duplex) {
		/*
		 * The 0x80 is important for the first audio channel
		 */
		if (devc->submodel == SUBMDL_ES1888) {
			div = 0x80 | ess_calc_div (795500, 256, speedp, &diff);
		} else {
			div = 0x80 | ess_calc_div (795500, 128, speedp, &diff);
		}
	} else if(devc->caps & SB_CAP_ES18XX_RATE) {
		if (devc->submodel == SUBMDL_ES1888) {
			ess_calc_best_speed(397700, 128, 795500, 256, 
						&div, speedp);
		} else {
			ess_calc_best_speed(ES18XX_CLOCK1, 128, ES18XX_CLOCK2, 256, 
						&div, speedp);
		}
	} else {
		if (*speedp > 22000) {
			div = 0x80 | ess_calc_div (ES1688_CLOCK1, 256, speedp, &diff);
		} else {
			div = 0x00 | ess_calc_div (ES1688_CLOCK2, 128, speedp, &diff);
		}
	}
	*divp = div;
}

static void ess_speed (sb_devc *devc, int audionum)
{
	int speed;
	int div, div2;

	ess_common_speed (devc, &(devc->speed), &div);

#ifdef FKS_REG_LOGGING
printk (KERN_INFO "FKS: ess_speed (%d) b speed = %d, div=%x\n", audionum, devc->speed, div);
#endif

	/* Set filter roll-off to 90% of speed/2 */
	speed = (devc->speed * 9) / 20;

	div2 = 256 - 7160000 / (speed * 82);

	if (!devc->duplex) audionum = 1;

	if (audionum == 1) {
		/* Change behaviour of register A1 *
		sb_chg_mixer(devc, 0x71, 0x20, 0x20)
		* For ES1869 only??? */
		ess_write (devc, 0xa1, div);
		ess_write (devc, 0xa2, div2);
	} else {
		ess_setmixer (devc, 0x70, div);
		/*
		 * FKS: fascinating: 0x72 doesn't seem to work.
		 */
		ess_write (devc, 0xa2, div2);
		ess_setmixer (devc, 0x72, div2);
	}
}

static int ess_audio_prepare_for_input(int dev, int bsize, int bcount)
{
	sb_devc *devc = audio_devs[dev]->devc;

	ess_speed(devc, 1);

	sb_dsp_command(devc, DSP_CMD_SPKOFF);

	ess_write (devc, 0xb8, 0x0e);	/* Auto init DMA mode */
	ess_change (devc, 0xa8, 0x03, 3 - devc->channels);	/* Mono/stereo */
	ess_write (devc, 0xb9, 2);	/* Demand mode (4 bytes/DMA request) */

	ess_exec_commands (devc, ess_inp_cmds);

	ess_change (devc, 0xb1, 0xf0, 0x50);
	ess_change (devc, 0xb2, 0xf0, 0x50);

	devc->trigger_bits = 0;
	return 0;
}

static int ess_audio_prepare_for_output_audio1 (int dev, int bsize, int bcount)
{
	sb_devc *devc = audio_devs[dev]->devc;

	sb_dsp_reset(devc);
	ess_speed(devc, 1);
	ess_write (devc, 0xb8, 4);	/* Auto init DMA mode */
	ess_change (devc, 0xa8, 0x03, 3 - devc->channels);	/* Mono/stereo */
	ess_write (devc, 0xb9, 2);	/* Demand mode (4 bytes/request) */

	ess_exec_commands (devc, ess_out_cmds);

	ess_change (devc, 0xb1, 0xf0, 0x50);	/* Enable DMA */
	ess_change (devc, 0xb2, 0xf0, 0x50);	/* Enable IRQ */

	sb_dsp_command(devc, DSP_CMD_SPKON);	/* There be sound! */

	devc->trigger_bits = 0;
	return 0;
}

static int ess_audio_prepare_for_output_audio2 (int dev, int bsize, int bcount)
{
	sb_devc *devc = audio_devs[dev]->devc;
	unsigned char bits;

/* FKS: qqq
	sb_dsp_reset(devc);
*/

	/*
	 * Auto-Initialize:
	 * DMA mode + demand mode (8 bytes/request, yes I want it all!)
	 * But leave 16-bit DMA bit untouched!
	 */
	ess_chgmixer (devc, 0x78, 0xd0, 0xd0);

	ess_speed(devc, 2);

	/* bits 4:3 on ES1887 represent recording source. Keep them! */
	bits = ess_getmixer (devc, 0x7a) & 0x18;

	/* Set stereo/mono */
	if (devc->channels != 1) bits |= 0x02;

	/* Init DACs; UNSIGNED mode for 8 bit; SIGNED mode for 16 bit */
	if (devc->bits != AFMT_U8) bits |= 0x05;	/* 16 bit */

	/* Enable DMA, IRQ will be shared (hopefully)*/
	bits |= 0x60;

	ess_setmixer (devc, 0x7a, bits);

	ess_mixer_reload (devc, SOUND_MIXER_PCM);	/* There be sound! */

	devc->trigger_bits = 0;
	return 0;
}

static int ess_audio_prepare_for_output(int dev, int bsize, int bcount)
{
	sb_devc *devc = audio_devs[dev]->devc;

#ifdef FKS_REG_LOGGING
printk(KERN_INFO "ess_audio_prepare_for_output: dma_out=%d,dma_in=%d\n"
, audio_devs[dev]->dmap_out->dma, audio_devs[dev]->dmap_in->dma);
#endif

	if (devc->duplex) {
		return ess_audio_prepare_for_output_audio2 (dev, bsize, bcount);
	} else {
		return ess_audio_prepare_for_output_audio1 (dev, bsize, bcount);
	}
}

static void ess_audio_halt_xfer(int dev)
{
	unsigned long flags;
	sb_devc *devc = audio_devs[dev]->devc;

	spin_lock_irqsave(&devc->lock, flags);
	sb_dsp_reset(devc);
	spin_unlock_irqrestore(&devc->lock, flags);

	/*
	 * Audio 2 may still be operational! Creates awful sounds!
	 */
	if (devc->duplex) ess_chgmixer(devc, 0x78, 0x03, 0x00);
}

static void ess_audio_start_input
	(int dev, unsigned long buf, int nr_bytes, int intrflag)
{
	int count = nr_bytes;
	sb_devc *devc = audio_devs[dev]->devc;
	short c = -nr_bytes;

	/*
	 * Start a DMA input to the buffer pointed by dmaqtail
	 */

	if (audio_devs[dev]->dmap_in->dma > 3) count >>= 1;
	count--;

	devc->irq_mode = IMODE_INPUT;

	ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff));
	ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff));

	ess_change (devc, 0xb8, 0x0f, 0x0f);	/* Go */
	devc->intr_active = 1;
}

static void ess_audio_output_block_audio1
	(int dev, unsigned long buf, int nr_bytes, int intrflag)
{
	int count = nr_bytes;
	sb_devc *devc = audio_devs[dev]->devc;
	short c = -nr_bytes;

	if (audio_devs[dev]->dmap_out->dma > 3)
		count >>= 1;
	count--;

	devc->irq_mode = IMODE_OUTPUT;

	ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff));
	ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff));

	ess_change (devc, 0xb8, 0x05, 0x05);	/* Go */
	devc->intr_active = 1;
}

static void ess_audio_output_block_audio2
	(int dev, unsigned long buf, int nr_bytes, int intrflag)
{
	int count = nr_bytes;
	sb_devc *devc = audio_devs[dev]->devc;
	short c = -nr_bytes;

	if (audio_devs[dev]->dmap_out->dma > 3) count >>= 1;
	count--;

	ess_setmixer (devc, 0x74, (unsigned char) ((unsigned short) c & 0xff));
	ess_setmixer (devc, 0x76, (unsigned char) (((unsigned short) c >> 8) & 0xff));
	ess_chgmixer (devc, 0x78, 0x03, 0x03);   /* Go */

	devc->irq_mode_16 = IMODE_OUTPUT;
		devc->intr_active_16 = 1;
}

static void ess_audio_output_block
	(int dev, unsigned long buf, int nr_bytes, int intrflag)
{
	sb_devc *devc = audio_devs[dev]->devc;

	if (devc->duplex) {
		ess_audio_output_block_audio2 (dev, buf, nr_bytes, intrflag);
	} else {
		ess_audio_output_block_audio1 (dev, buf, nr_bytes, intrflag);
	}
}

/*
 * FKS: the if-statements for both bits and bits_16 are quite alike.
 * Combine this...
 */
static void ess_audio_trigger(int dev, int bits)
{
	sb_devc *devc = audio_devs[dev]->devc;

	int bits_16 = bits & devc->irq_mode_16;
	bits &= devc->irq_mode;

	if (!bits && !bits_16) {
		/* FKS oh oh.... wrong?? for dma 16? */
		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
	}

	if (bits) {
		switch (devc->irq_mode)
		{
			case IMODE_INPUT:
				ess_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
					devc->trg_intrflag);
				break;

			case IMODE_OUTPUT:
				ess_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
					devc->trg_intrflag);
				break;
		}
	}

	if (bits_16) {
		switch (devc->irq_mode_16) {
		case IMODE_INPUT:
			ess_audio_start_input(dev, devc->trg_buf_16, devc->trg_bytes_16,
					devc->trg_intrflag_16);
			break;

		case IMODE_OUTPUT:
			ess_audio_output_block(dev, devc->trg_buf_16, devc->trg_bytes_16,
					devc->trg_intrflag_16);
			break;
		}
	}

	devc->trigger_bits = bits | bits_16;
}

static int ess_audio_set_speed(int dev, int speed)
{
	sb_devc *devc = audio_devs[dev]->devc;
	int minspeed, maxspeed, dummydiv;

	if (speed > 0) {
		minspeed = (devc->duplex ? 6215  : 5000 );
		maxspeed = (devc->duplex ? 44100 : 48000);
		if (speed < minspeed) speed = minspeed;
		if (speed > maxspeed) speed = maxspeed;

		ess_common_speed (devc, &speed, &dummydiv);

		devc->speed = speed;
	}
	return devc->speed;
}

/*
 * FKS: This is a one-on-one copy of sb1_audio_set_bits
 */
static unsigned int ess_audio_set_bits(int dev, unsigned int bits)
{
	sb_devc *devc = audio_devs[dev]->devc;

	if (bits != 0) {
		if (bits == AFMT_U8 || bits == AFMT_S16_LE) {
			devc->bits = bits;
		} else {
			devc->bits = AFMT_U8;
		}
	}

	return devc->bits;
}

/*
 * FKS: This is a one-on-one copy of sbpro_audio_set_channels
 * (*) Modified it!!
 */
static short ess_audio_set_channels(int dev, short channels)
{
	sb_devc *devc = audio_devs[dev]->devc;

	if (channels == 1 || channels == 2) devc->channels = channels;

	return devc->channels;
}

static struct audio_driver ess_audio_driver =   /* ESS ES688/1688 */
{
	.owner			= THIS_MODULE,
	.open			= sb_audio_open,
	.close			= sb_audio_close,
	.output_block		= ess_set_output_parms,
	.start_input		= ess_set_input_parms,
	.prepare_for_input	= ess_audio_prepare_for_input,
	.prepare_for_output	= ess_audio_prepare_for_output,
	.halt_io		= ess_audio_halt_xfer,
	.trigger		= ess_audio_trigger,
	.set_speed		= ess_audio_set_speed,
	.set_bits		= ess_audio_set_bits,
	.set_channels		= ess_audio_set_channels
};

/*
 * ess_audio_init must be called from sb_audio_init
 */
struct audio_driver *ess_audio_init
		(sb_devc *devc, int *audio_flags, int *format_mask)
{
	*audio_flags = DMA_AUTOMODE;
	*format_mask |= AFMT_S16_LE;

	if (devc->duplex) {
		int tmp_dma;
		/*
		 * sb_audio_init thinks dma8 is for playback and
		 * dma16 is for record. Not now! So swap them.
		 */
		tmp_dma		= devc->dma16;
		devc->dma16	= devc->dma8;
		devc->dma8	= tmp_dma;

		*audio_flags |= DMA_DUPLEX;
	}

	return &ess_audio_driver;
}

/****************************************************************************
 *																			*
 *								ESS common									*
 *																			*
 ****************************************************************************/
static void ess_handle_channel
	(char *channel, int dev, int intr_active, unsigned char flag, int irq_mode)
{
	if (!intr_active || !flag) return;
#ifdef FKS_REG_LOGGING
printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode);
#endif
	switch (irq_mode) {
		case IMODE_OUTPUT:
			DMAbuf_outputintr (dev, 1);
			break;

		case IMODE_INPUT:
			DMAbuf_inputintr (dev);
			break;

		case IMODE_INIT:
			break;

		default:;
			/* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */
	}
}

/*
 * FKS: TODO!!! Finish this!
 *
 * I think midi stuff uses uart401, without interrupts.
 * So IMODE_MIDI isn't a value for devc->irq_mode.
 */
void ess_intr (sb_devc *devc)
{
	int				status;
	unsigned char	src;

	if (devc->submodel == SUBMDL_ES1887) {
		src = ess_getmixer (devc, 0x7f) >> 4;
	} else {
		src = 0xff;
	}

#ifdef FKS_REG_LOGGING
printk(KERN_INFO "FKS: sbintr src=%x\n",(int)src);
#endif
	ess_handle_channel
		( "Audio 1"
		, devc->dev, devc->intr_active   , src & 0x01, devc->irq_mode   );
	ess_handle_channel
		( "Audio 2"
		, devc->dev, devc->intr_active_16, src & 0x02, devc->irq_mode_16);
	/*
	 * Acknowledge interrupts
	 */
	if (devc->submodel == SUBMDL_ES1887 && (src & 0x02)) {
		ess_chgmixer (devc, 0x7a, 0x80, 0x00);
	}

	if (src & 0x01) {
		status = inb(DSP_DATA_AVAIL);
	}
}

static void ess_extended (sb_devc * devc)
{
	/* Enable extended mode */

	sb_dsp_command(devc, 0xc6);
}

static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data)
{
#ifdef FKS_REG_LOGGING
printk(KERN_INFO "FKS: write reg %x: %x\n", reg, data);
#endif
	/* Write a byte to an extended mode register of ES1688 */

	if (!sb_dsp_command(devc, reg))
		return 0;

	return sb_dsp_command(devc, data);
}

static int ess_read (sb_devc * devc, unsigned char reg)
{
	/* Read a byte from an extended mode register of ES1688 */

	/* Read register command */
	if (!sb_dsp_command(devc, 0xc0)) return -1;

	if (!sb_dsp_command(devc, reg )) return -1;

	return sb_dsp_get_byte(devc);
}

int ess_dsp_reset(sb_devc * devc)
{
	int loopc;

#ifdef FKS_REG_LOGGING
printk(KERN_INFO "FKS: ess_dsp_reset 1\n");
ess_show_mixerregs (devc);
#endif

	DEB(printk("Entered ess_dsp_reset()\n"));

	outb(3, DSP_RESET); /* Reset FIFO too */

	udelay(10);
	outb(0, DSP_RESET);
	udelay(30);

	for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);

	if (inb(DSP_READ) != 0xAA) {
		DDB(printk("sb: No response to RESET\n"));
		return 0;   /* Sorry */
	}
	ess_extended (devc);

	DEB(printk("sb_dsp_reset() OK\n"));

#ifdef FKS_LOGGING
printk(KERN_INFO "FKS: dsp_reset 2\n");
ess_show_mixerregs (devc);
#endif

	return 1;
}

static int ess_irq_bits (int irq)
{
	switch (irq) {
	case 2:
	case 9:
		return 0;

	case 5:
		return 1;

	case 7:
		return 2;

	case 10:
		return 3;

	default:
		printk(KERN_ERR "ESS1688: Invalid IRQ %d\n", irq);
		return -1;
	}
}

/*
 *	Set IRQ configuration register for all ESS models
 */
static int ess_common_set_irq_hw (sb_devc * devc)
{
	int irq_bits;

	if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return 0;

	if (!ess_write (devc, 0xb1, 0x50 | (irq_bits << 2))) {
		printk(KERN_ERR "ES1688: Failed to write to IRQ config register\n");
		return 0;
	}
	return 1;
}

/*
 * I wanna use modern ES1887 mixer irq handling. Funny is the
 * fact that my BIOS wants the same. But suppose someone's BIOS
 * doesn't do this!
 * This is independent of duplex. If there's a 1887 this will
 * prevent it from going into 1888 mode.
 */
static void ess_es1887_set_irq_hw (sb_devc * devc)
{
	int irq_bits;

	if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return;

	ess_chgmixer (devc, 0x7f, 0x0f, 0x01 | ((irq_bits + 1) << 1));
}

static int ess_set_irq_hw (sb_devc * devc)
{
	if (devc->submodel == SUBMDL_ES1887) ess_es1887_set_irq_hw (devc);

	return ess_common_set_irq_hw (devc);
}

#ifdef FKS_TEST

/*
 * FKS_test:
 *	for ES1887: 00, 18, non wr bits: 0001 1000
 *	for ES1868: 00, b8, non wr bits: 1011 1000
 *	for ES1888: 00, f8, non wr bits: 1111 1000
 *	for ES1688: 00, f8, non wr bits: 1111 1000
 *	+   ES968
 */

static void FKS_test (sb_devc * devc)
{
	int val1, val2;
	val1 = ess_getmixer (devc, 0x64);
	ess_setmixer (devc, 0x64, ~val1);
	val2 = ess_getmixer (devc, 0x64) ^ ~val1;
	ess_setmixer (devc, 0x64, val1);
	val1 ^= ess_getmixer (devc, 0x64);
printk (KERN_INFO "FKS: FKS_test %02x, %02x\n", (val1 & 0x0ff), (val2 & 0x0ff));
};
#endif

static unsigned int ess_identify (sb_devc * devc)
{
	unsigned int val;
	unsigned long flags;

	spin_lock_irqsave(&devc->lock, flags);
	outb(((unsigned char) (0x40 & 0xff)), MIXER_ADDR);

	udelay(20);
	val  = inb(MIXER_DATA) << 8;
	udelay(20);
	val |= inb(MIXER_DATA);
	udelay(20);
	spin_unlock_irqrestore(&devc->lock, flags);

	return val;
}

/*
 * ESS technology describes a detection scheme in their docs. It involves
 * fiddling with the bits in certain mixer registers. ess_probe is supposed
 * to help.
 *
 * FKS: tracing shows ess_probe writes wrong value to 0x64. Bit 3 reads 1, but
 * should be written 0 only. Check this.
 */
static int ess_probe (sb_devc * devc, int reg, int xorval)
{
	int  val1, val2, val3;

	val1 = ess_getmixer (devc, reg);
	val2 = val1 ^ xorval;
	ess_setmixer (devc, reg, val2);
	val3 = ess_getmixer (devc, reg);
	ess_setmixer (devc, reg, val1);

	return (val2 == val3);
}

int ess_init(sb_devc * devc, struct address_info *hw_config)
{
	unsigned char cfg;
	int ess_major = 0, ess_minor = 0;
	int i;
	static char name[100], modelname[10];

	/*
	 * Try to detect ESS chips.
	 */

	sb_dsp_command(devc, 0xe7); /* Return identification */

	for (i = 1000; i; i--) {
		if (inb(DSP_DATA_AVAIL) & 0x80) {
			if (ess_major == 0) {
				ess_major = inb(DSP_READ);
			} else {
				ess_minor = inb(DSP_READ);
				break;
			}
		}
	}

	if (ess_major == 0) return 0;

	if (ess_major == 0x48 && (ess_minor & 0xf0) == 0x80) {
		sprintf(name, "ESS ES488 AudioDrive (rev %d)",
			ess_minor & 0x0f);
		hw_config->name = name;
		devc->model = MDL_SBPRO;
		return 1;
	}

	/*
	 * This the detection heuristic of ESS technology, though somewhat
	 * changed to actually make it work.
	 * This results in the following detection steps:
	 * - distinct between ES688 and ES1688+ (as always done in this driver)
	 *   if ES688 we're ready
	 * - try to detect ES1868, ES1869 or ES1878 (ess_identify)
	 *   if successful we're ready
	 * - try to detect ES1888, ES1887 or ES1788 (aim: detect ES1887)
	 *   if successful we're ready
	 * - Dunno. Must be 1688. Will do in general
	 *
	 * This is the most BETA part of the software: Will the detection
	 * always work?
	 */
	devc->model = MDL_ESS;
	devc->submodel = ess_minor & 0x0f;

	if (ess_major == 0x68 && (ess_minor & 0xf0) == 0x80) {
		char *chip = NULL;
		int submodel = -1;

		switch (devc->sbmo.esstype) {
		case ESSTYPE_DETECT:
		case ESSTYPE_LIKE20:
			break;
		case 688:
			submodel = 0x00;
			break;
		case 1688:
			submodel = 0x08;
			break;
		case 1868:
			submodel = SUBMDL_ES1868;
			break;
		case 1869:
			submodel = SUBMDL_ES1869;
			break;
		case 1788:
			submodel = SUBMDL_ES1788;
			break;
		case 1878:
			submodel = SUBMDL_ES1878;
			break;
		case 1879:
			submodel = SUBMDL_ES1879;
			break;
		case 1887:
			submodel = SUBMDL_ES1887;
			break;
		case 1888:
			submodel = SUBMDL_ES1888;
			break;
		default:
			printk (KERN_ERR "Invalid esstype=%d specified\n", devc->sbmo.esstype);
			return 0;
		};
		if (submodel != -1) {
			devc->submodel = submodel;
			sprintf (modelname, "ES%d", devc->sbmo.esstype);
			chip = modelname;
		};
		if (chip == NULL && (ess_minor & 0x0f) < 8) {
			chip = "ES688";
		};
#ifdef FKS_TEST
FKS_test (devc);
#endif
		/*
		 * If Nothing detected yet, and we want 2.0 behaviour...
		 * Then let's assume it's ES1688.
		 */
		if (chip == NULL && devc->sbmo.esstype == ESSTYPE_LIKE20) {
			chip = "ES1688";
		};

		if (chip == NULL) {
			int type;

			type = ess_identify (devc);

			switch (type) {
			case 0x1868:
				chip = "ES1868";
				devc->submodel = SUBMDL_ES1868;
				break;
			case 0x1869:
				chip = "ES1869";
				devc->submodel = SUBMDL_ES1869;
				break;
			case 0x1878:
				chip = "ES1878";
				devc->submodel = SUBMDL_ES1878;
				break;
			case 0x1879:
				chip = "ES1879";
				devc->submodel = SUBMDL_ES1879;
				break;
			default:
				if ((type & 0x00ff) != ((type >> 8) & 0x00ff)) {
					printk ("ess_init: Unrecognized %04x\n", type);
				}
			};
		};
#if 0
		/*
		 * this one failed:
		 * the probing of bit 4 is another thought: from ES1788 and up, all
		 * chips seem to have hardware volume control. Bit 4 is readonly to
		 * check if a hardware volume interrupt has fired.
		 * Cause ES688/ES1688 don't have this feature, bit 4 might be writeable
		 * for these chips.
		 */
		if (chip == NULL && !ess_probe(devc, 0x64, (1 << 4))) {
#endif
		/*
		 * the probing of bit 2 is my idea. The ES1887 docs want me to probe
		 * bit 3. This results in ES1688 being detected as ES1788.
		 * Bit 2 is for "Enable HWV IRQE", but as ES(1)688 chips don't have
		 * HardWare Volume, I think they don't have this IRQE.
		 */
		if (chip == NULL && ess_probe(devc, 0x64, (1 << 2))) {
			if (ess_probe (devc, 0x70, 0x7f)) {
				if (ess_probe (devc, 0x64, (1 << 5))) {
					chip = "ES1887";
					devc->submodel = SUBMDL_ES1887;
				} else {
					chip = "ES1888";
					devc->submodel = SUBMDL_ES1888;
				}
			} else {
				chip = "ES1788";
				devc->submodel = SUBMDL_ES1788;
			}
		};
		if (chip == NULL) {
			chip = "ES1688";
		};

	    printk ( KERN_INFO "ESS chip %s %s%s\n"
               , chip
               , ( devc->sbmo.esstype == ESSTYPE_DETECT || devc->sbmo.esstype == ESSTYPE_LIKE20
                 ? "detected"
                 : "specified"
                 )
               , ( devc->sbmo.esstype == ESSTYPE_LIKE20
                 ? " (kernel 2.0 compatible)"
                 : ""
                 )
               );

		sprintf(name,"ESS %s AudioDrive (rev %d)", chip, ess_minor & 0x0f);
	} else {
		strcpy(name, "Jazz16");
	}

	/* AAS: info stolen from ALSA: these boards have different clocks */
	switch(devc->submodel) {
/* APPARENTLY NOT 1869 AND 1887
		case SUBMDL_ES1869:
		case SUBMDL_ES1887:
*/		
		case SUBMDL_ES1888:
			devc->caps |= SB_CAP_ES18XX_RATE;
			break;
	}

	hw_config->name = name;
	/* FKS: sb_dsp_reset to enable extended mode???? */
	sb_dsp_reset(devc); /* Turn on extended mode */

	/*
	 *  Enable joystick and OPL3
	 */
	cfg = ess_getmixer (devc, 0x40);
	ess_setmixer (devc, 0x40, cfg | 0x03);
	if (devc->submodel >= 8) {		/* ES1688 */
		devc->caps |= SB_NO_MIDI;   /* ES1688 uses MPU401 MIDI mode */
	}
	sb_dsp_reset (devc);

	/*
	 * This is important! If it's not done, the IRQ probe in sb_dsp_init
	 * may fail.
	 */
	return ess_set_irq_hw (devc);
}

static int ess_set_dma_hw(sb_devc * devc)
{
	unsigned char cfg, dma_bits = 0, dma16_bits;
	int dma;

#ifdef FKS_LOGGING
printk(KERN_INFO "ess_set_dma_hw: dma8=%d,dma16=%d,dup=%d\n"
, devc->dma8, devc->dma16, devc->duplex);
#endif

	/*
	 * FKS: It seems as if this duplex flag isn't set yet. Check it.
	 */
	dma = devc->dma8;

	if (dma > 3 || dma < 0 || dma == 2) {
		dma_bits = 0;
		printk(KERN_ERR "ESS1688: Invalid DMA8 %d\n", dma);
		return 0;
	} else {
		/* Extended mode DMA enable */
		cfg = 0x50;

		if (dma == 3) {
			dma_bits = 3;
		} else {
			dma_bits = dma + 1;
		}
	}

	if (!ess_write (devc, 0xb2, cfg | (dma_bits << 2))) {
		printk(KERN_ERR "ESS1688: Failed to write to DMA config register\n");
		return 0;
	}

	if (devc->duplex) {
		dma = devc->dma16;
		dma16_bits = 0;

		if (dma >= 0) {
			switch (dma) {
			case 0:
				dma_bits = 0x04;
				break;
			case 1:
				dma_bits = 0x05;
				break;
			case 3:
				dma_bits = 0x06;
				break;
			case 5:
				dma_bits   = 0x07;
				dma16_bits = 0x20;
				break;
			default:
				printk(KERN_ERR "ESS1887: Invalid DMA16 %d\n", dma);
				return 0;
			};
			ess_chgmixer (devc, 0x78, 0x20, dma16_bits);
			ess_chgmixer (devc, 0x7d, 0x07, dma_bits);
		}
	}
	return 1;
}

/*
 * This one is called from sb_dsp_init.
 *
 * Return values:
 *  0: Failed
 *  1: Succeeded or doesn't apply (not SUBMDL_ES1887)
 */
int ess_dsp_init (sb_devc *devc, struct address_info *hw_config)
{
	/*
	 * Caller also checks this, but anyway
	 */
	if (devc->model != MDL_ESS) {
		printk (KERN_INFO "ess_dsp_init for non ESS chip\n");
		return 1;
	}
	/*
	 * This for ES1887 to run Full Duplex. Actually ES1888
	 * is allowed to do so too. I have no idea yet if this
	 * will work for ES1888 however.
	 *
	 * For SB16 having both dma8 and dma16 means enable
	 * Full Duplex. Let's try this for ES1887 too
	 *
	 */
	if (devc->submodel == SUBMDL_ES1887) {
		if (hw_config->dma2 != -1) {
			devc->dma16 = hw_config->dma2;
		}
		/*
		 * devc->duplex initialization is put here, cause
		 * ess_set_dma_hw needs it.
		 */
		if (devc->dma8 != devc->dma16 && devc->dma16 != -1) {
			devc->duplex = 1;
		}
	}
	if (!ess_set_dma_hw (devc)) {
		free_irq(devc->irq, devc);
		return 0;
	}
	return 1;
}

/****************************************************************************
 *																			*
 *									ESS mixer								*
 *																			*
 ****************************************************************************/

#define ES688_RECORDING_DEVICES	\
			( SOUND_MASK_LINE	| SOUND_MASK_MIC	| SOUND_MASK_CD		)
#define ES688_MIXER_DEVICES		\
			( SOUND_MASK_SYNTH	| SOUND_MASK_PCM	| SOUND_MASK_LINE	\
			| SOUND_MASK_MIC	| SOUND_MASK_CD		| SOUND_MASK_VOLUME	\
			| SOUND_MASK_LINE2	| SOUND_MASK_SPEAKER					)

#define ES1688_RECORDING_DEVICES	\
			( ES688_RECORDING_DEVICES					)
#define ES1688_MIXER_DEVICES		\
			( ES688_MIXER_DEVICES | SOUND_MASK_RECLEV	)

#define ES1887_RECORDING_DEVICES	\
			( ES1688_RECORDING_DEVICES | SOUND_MASK_LINE2 | SOUND_MASK_SYNTH)
#define ES1887_MIXER_DEVICES		\
			( ES1688_MIXER_DEVICES											)

/*
 * Mixer registers of ES1887
 *
 * These registers specifically take care of recording levels. To make the
 * mapping from playback devices to recording devices every recording
 * devices = playback device + ES_REC_MIXER_RECDIFF
 */
#define ES_REC_MIXER_RECBASE	(SOUND_MIXER_LINE3 + 1)
#define ES_REC_MIXER_RECDIFF	(ES_REC_MIXER_RECBASE - SOUND_MIXER_SYNTH)

#define ES_REC_MIXER_RECSYNTH	(SOUND_MIXER_SYNTH	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECPCM		(SOUND_MIXER_PCM	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECSPEAKER	(SOUND_MIXER_SPEAKER + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECLINE	(SOUND_MIXER_LINE	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECMIC		(SOUND_MIXER_MIC	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECCD		(SOUND_MIXER_CD		 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECIMIX	(SOUND_MIXER_IMIX	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECALTPCM	(SOUND_MIXER_ALTPCM	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECRECLEV	(SOUND_MIXER_RECLEV	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECIGAIN	(SOUND_MIXER_IGAIN	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECOGAIN	(SOUND_MIXER_OGAIN	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECLINE1	(SOUND_MIXER_LINE1	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECLINE2	(SOUND_MIXER_LINE2	 + ES_REC_MIXER_RECDIFF)
#define ES_REC_MIXER_RECLINE3	(SOUND_MIXER_LINE3	 + ES_REC_MIXER_RECDIFF)

static mixer_tab es688_mix = {
MIX_ENT(SOUND_MIXER_VOLUME,			0x32, 7, 4, 0x32, 3, 4),
MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_RECLEV,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0)
};

/*
 * The ES1688 specifics... hopefully correct...
 * - 6 bit master volume
 *   I was wrong, ES1888 docs say ES1688 didn't have it.
 * - RECLEV control
 * These may apply to ES688 too. I have no idea.
 */
static mixer_tab es1688_mix = {
MIX_ENT(SOUND_MIXER_VOLUME,			0x32, 7, 4, 0x32, 3, 4),
MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0)
};

static mixer_tab es1688later_mix = {
MIX_ENT(SOUND_MIXER_VOLUME,			0x60, 5, 6, 0x62, 5, 6),
MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0)
};

/*
 * This one is for all ESS chips with a record mixer.
 * It's not used (yet) however
 */
static mixer_tab es_rec_mix = {
MIX_ENT(SOUND_MIXER_VOLUME,			0x60, 5, 6, 0x62, 5, 6),
MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
MIX_ENT(SOUND_MIXER_PCM,			0x14, 7, 4, 0x14, 3, 4),
MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECSYNTH,		0x6b, 7, 4, 0x6b, 3, 4),
MIX_ENT(ES_REC_MIXER_RECPCM,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECSPEAKER,	0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECLINE,		0x6e, 7, 4, 0x6e, 3, 4),
MIX_ENT(ES_REC_MIXER_RECMIC,		0x68, 7, 4, 0x68, 3, 4),
MIX_ENT(ES_REC_MIXER_RECCD,			0x6a, 7, 4, 0x6a, 3, 4),
MIX_ENT(ES_REC_MIXER_RECIMIX,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECALTPCM,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECRECLEV,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECIGAIN,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECOGAIN,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECLINE1,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECLINE2,		0x6c, 7, 4, 0x6c, 3, 4),
MIX_ENT(ES_REC_MIXER_RECLINE3,		0x00, 0, 0, 0x00, 0, 0)
};

/*
 * This one is for ES1887. It's little different from es_rec_mix: it
 * has 0x7c for PCM playback level. This is because ES1887 uses
 * Audio 2 for playback.
 */
static mixer_tab es1887_mix = {
MIX_ENT(SOUND_MIXER_VOLUME,			0x60, 5, 6, 0x62, 5, 6),
MIX_ENT(SOUND_MIXER_BASS,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_TREBLE,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_SYNTH,			0x36, 7, 4, 0x36, 3, 4),
MIX_ENT(SOUND_MIXER_PCM,			0x7c, 7, 4, 0x7c, 3, 4),
MIX_ENT(SOUND_MIXER_SPEAKER,		0x3c, 2, 3, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE,			0x3e, 7, 4, 0x3e, 3, 4),
MIX_ENT(SOUND_MIXER_MIC,			0x1a, 7, 4, 0x1a, 3, 4),
MIX_ENT(SOUND_MIXER_CD,				0x38, 7, 4, 0x38, 3, 4),
MIX_ENT(SOUND_MIXER_IMIX,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_ALTPCM,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_RECLEV,			0xb4, 7, 4, 0xb4, 3, 4),
MIX_ENT(SOUND_MIXER_IGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_OGAIN,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE1,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(SOUND_MIXER_LINE2,			0x3a, 7, 4, 0x3a, 3, 4),
MIX_ENT(SOUND_MIXER_LINE3,			0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECSYNTH,		0x6b, 7, 4, 0x6b, 3, 4),
MIX_ENT(ES_REC_MIXER_RECPCM,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECSPEAKER,	0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECLINE,		0x6e, 7, 4, 0x6e, 3, 4),
MIX_ENT(ES_REC_MIXER_RECMIC,		0x68, 7, 4, 0x68, 3, 4),
MIX_ENT(ES_REC_MIXER_RECCD,			0x6a, 7, 4, 0x6a, 3, 4),
MIX_ENT(ES_REC_MIXER_RECIMIX,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECALTPCM,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECRECLEV,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECIGAIN,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECOGAIN,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECLINE1,		0x00, 0, 0, 0x00, 0, 0),
MIX_ENT(ES_REC_MIXER_RECLINE2,		0x6c, 7, 4, 0x6c, 3, 4),
MIX_ENT(ES_REC_MIXER_RECLINE3,		0x00, 0, 0, 0x00, 0, 0)
};

static int ess_has_rec_mixer (int submodel)
{
	switch (submodel) {
	case SUBMDL_ES1887:
		return 1;
	default:
		return 0;
	};
};

#ifdef FKS_LOGGING
static int ess_mixer_mon_regs[]
	= { 0x70, 0x71, 0x72, 0x74, 0x76, 0x78, 0x7a, 0x7c, 0x7d, 0x7f
	  , 0xa1, 0xa2, 0xa4, 0xa5, 0xa8, 0xa9
	  , 0xb1, 0xb2, 0xb4, 0xb5, 0xb6, 0xb7, 0xb9
	  , 0x00};

static void ess_show_mixerregs (sb_devc *devc)
{
	int *mp = ess_mixer_mon_regs;

return;

	while (*mp != 0) {
		printk (KERN_INFO "res (%x)=%x\n", *mp, (int)(ess_getmixer (devc, *mp)));
		mp++;
	}
}
#endif

void ess_setmixer (sb_devc * devc, unsigned int port, unsigned int value)
{
	unsigned long flags;

#ifdef FKS_LOGGING
printk(KERN_INFO "FKS: write mixer %x: %x\n", port, value);
#endif

	spin_lock_irqsave(&devc->lock, flags);
	if (port >= 0xa0) {
		ess_write (devc, port, value);
	} else {
		outb(((unsigned char) (port & 0xff)), MIXER_ADDR);

		udelay(20);
		outb(((unsigned char) (value & 0xff)), MIXER_DATA);
		udelay(20);
	};
	spin_unlock_irqrestore(&devc->lock, flags);
}

unsigned int ess_getmixer (sb_devc * devc, unsigned int port)
{
	unsigned int val;
	unsigned long flags;

	spin_lock_irqsave(&devc->lock, flags);

	if (port >= 0xa0) {
		val = ess_read (devc, port);
	} else {
		outb(((unsigned char) (port & 0xff)), MIXER_ADDR);

		udelay(20);
		val = inb(MIXER_DATA);
		udelay(20);
	}
	spin_unlock_irqrestore(&devc->lock, flags);

	return val;
}

static void ess_chgmixer
	(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
{
	int value;

	value = ess_getmixer (devc, reg);
	value = (value & ~mask) | (val & mask);
	ess_setmixer (devc, reg, value);
}

/*
 * ess_mixer_init must be called from sb_mixer_init
 */
void ess_mixer_init (sb_devc * devc)
{
	devc->mixer_caps = SOUND_CAP_EXCL_INPUT;

	/*
	* Take care of ES1887 specifics...
	*/
	switch (devc->submodel) {
	case SUBMDL_ES1887:
		devc->supported_devices		= ES1887_MIXER_DEVICES;
		devc->supported_rec_devices	= ES1887_RECORDING_DEVICES;
#ifdef FKS_LOGGING
printk (KERN_INFO "FKS: ess_mixer_init dup = %d\n", devc->duplex);
#endif
		if (devc->duplex) {
			devc->iomap				= &es1887_mix;
			devc->iomap_sz                          = ARRAY_SIZE(es1887_mix);
		} else {
			devc->iomap				= &es_rec_mix;
			devc->iomap_sz                          = ARRAY_SIZE(es_rec_mix);
		}
		break;
	default:
		if (devc->submodel < 8) {
			devc->supported_devices		= ES688_MIXER_DEVICES;
			devc->supported_rec_devices	= ES688_RECORDING_DEVICES;
			devc->iomap					= &es688_mix;
			devc->iomap_sz                                  = ARRAY_SIZE(es688_mix);
		} else {
			/*
			 * es1688 has 4 bits master vol.
			 * later chips have 6 bits (?)
			 */
			devc->supported_devices		= ES1688_MIXER_DEVICES;
			devc->supported_rec_devices	= ES1688_RECORDING_DEVICES;
			if (devc->submodel < 0x10) {
				devc->iomap				= &es1688_mix;
				devc->iomap_sz                          = ARRAY_SIZE(es688_mix);
			} else {
				devc->iomap				= &es1688later_mix;
				devc->iomap_sz                          = ARRAY_SIZE(es1688later_mix);
			}
		}
	}
}

/*
 * Changing playback levels at an ESS chip with record mixer means having to
 * take care of recording levels of recorded inputs (devc->recmask) too!
 */
int ess_mixer_set(sb_devc *devc, int dev, int left, int right)
{
	if (ess_has_rec_mixer (devc->submodel) && (devc->recmask & (1 << dev))) {
		sb_common_mixer_set (devc, dev + ES_REC_MIXER_RECDIFF, left, right);
	}
	return sb_common_mixer_set (devc, dev, left, right);
}

/*
 * After a sb_dsp_reset extended register 0xb4 (RECLEV) is reset too. After
 * sb_dsp_reset RECLEV has to be restored. This is where ess_mixer_reload
 * helps.
 */
void ess_mixer_reload (sb_devc *devc, int dev)
{
	int left, right, value;

	value = devc->levels[dev];
	left  = value & 0x000000ff;
	right = (value & 0x0000ff00) >> 8;

	sb_common_mixer_set(devc, dev, left, right);
}

static int es_rec_set_recmask(sb_devc * devc, int mask)
{
	int i, i_mask, cur_mask, diff_mask;
	int value, left, right;

#ifdef FKS_LOGGING
printk (KERN_INFO "FKS: es_rec_set_recmask mask = %x\n", mask);
#endif
	/*
	 * Changing the recmask on an ESS chip with recording mixer means:
	 * (1) Find the differences
	 * (2) For "turned-on"  inputs: make the recording level the playback level
	 * (3) For "turned-off" inputs: make the recording level zero
	 */
	cur_mask  = devc->recmask;
	diff_mask = (cur_mask ^ mask);

	for (i = 0; i < 32; i++) {
		i_mask = (1 << i);
		if (diff_mask & i_mask) {	/* Difference? (1)  */
			if (mask & i_mask) {	/* Turn it on  (2)  */
				value = devc->levels[i];
				left  = value & 0x000000ff;
				right = (value & 0x0000ff00) >> 8;
			} else {				/* Turn it off (3)  */
				left  = 0;
				left  = 0;
				right = 0;
			}
			sb_common_mixer_set(devc, i + ES_REC_MIXER_RECDIFF, left, right);
		}
	}
	return mask;
}

int ess_set_recmask(sb_devc * devc, int *mask)
{
	/* This applies to ESS chips with record mixers only! */

	if (ess_has_rec_mixer (devc->submodel)) {
		*mask	= es_rec_set_recmask (devc, *mask);
		return 1;									/* Applied		*/
	} else {
		return 0;									/* Not applied	*/
	}
}

/*
 * ess_mixer_reset must be called from sb_mixer_reset
 */
int ess_mixer_reset (sb_devc * devc)
{
	/*
	 * Separate actions for ESS chips with a record mixer:
	 */
	if (ess_has_rec_mixer (devc->submodel)) {
		switch (devc->submodel) {
		case SUBMDL_ES1887:
			/*
			 * Separate actions for ES1887:
			 * Change registers 7a and 1c to make the record mixer the
			 * actual recording source.
			 */
			ess_chgmixer(devc, 0x7a, 0x18, 0x08);
			ess_chgmixer(devc, 0x1c, 0x07, 0x07);
			break;
		};
		/*
		 * Call set_recmask for proper initialization
		 */
		devc->recmask = devc->supported_rec_devices;
		es_rec_set_recmask(devc, 0);
		devc->recmask = 0;

		return 1;	/* We took care of recmask.				*/
	} else {
		return 0;	/* We didn't take care; caller do it	*/
	}
}

/****************************************************************************
 *																			*
 *								ESS midi									*
 *																			*
 ****************************************************************************/

/*
 * FKS: IRQ may be shared. Hm. And if so? Then What?
 */
int ess_midi_init(sb_devc * devc, struct address_info *hw_config)
{
	unsigned char   cfg, tmp;

	cfg = ess_getmixer (devc, 0x40) & 0x03;

	if (devc->submodel < 8) {
		ess_setmixer (devc, 0x40, cfg | 0x03);	/* Enable OPL3 & joystick */
		return 0;  					 /* ES688 doesn't support MPU401 mode */
	}
	tmp = (hw_config->io_base & 0x0f0) >> 4;

	if (tmp > 3) {
		ess_setmixer (devc, 0x40, cfg);
		return 0;
	}
	cfg |= tmp << 3;

	tmp = 1;		/* MPU enabled without interrupts */

	/* May be shared: if so the value is -ve */

	switch (abs(hw_config->irq)) {
		case 9:
			tmp = 0x4;
			break;
		case 5:
			tmp = 0x5;
			break;
		case 7:
			tmp = 0x6;
			break;
		case 10:
			tmp = 0x7;
			break;
		default:
			return 0;
	}

	cfg |= tmp << 5;
	ess_setmixer (devc, 0x40, cfg | 0x03);

	return 1;
}