Eric Lee / smarc-fsl-linux-kernel

csr_wifi_hip_card_sdio.c 124 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 
/*****************************************************************************

            (c) Cambridge Silicon Radio Limited 2012
            All rights reserved and confidential information of CSR

            Refer to LICENSE.txt included with this source for details
            on the license terms.

*****************************************************************************/

/*
 * ---------------------------------------------------------------------------
 * FILE: csr_wifi_hip_card_sdio.c
 *
 * PURPOSE: Implementation of the Card API for SDIO.
 *
 * NOTES:
 *      CardInit() is called from the SDIO probe callback when a card is
 *      inserted. This performs the basic SDIO initialisation, enabling i/o
 *      etc.
 *
 * ---------------------------------------------------------------------------
 */
#include <linux/slab.h>
#include "csr_wifi_hip_unifi.h"
#include "csr_wifi_hip_conversions.h"
#include "csr_wifi_hip_unifiversion.h"
#include "csr_wifi_hip_card.h"
#include "csr_wifi_hip_card_sdio.h"
#include "csr_wifi_hip_chiphelper.h"


/* Time to wait between attempts to read MAILBOX0 */
#define MAILBOX1_TIMEOUT                10  /* in millisecs */
#define MAILBOX1_ATTEMPTS               200 /* 2 seconds */

#define MAILBOX2_TIMEOUT                5   /* in millisecs */
#define MAILBOX2_ATTEMPTS               10  /* 50ms */

#define RESET_SETTLE_DELAY              25  /* in millisecs */

static CsrResult card_init_slots(card_t *card);
static CsrResult card_hw_init(card_t *card);
static CsrResult firmware_present_in_flash(card_t *card);
static void bootstrap_chip_hw(card_t *card);
static CsrResult unifi_reset_hardware(card_t *card);
static CsrResult unifi_hip_init(card_t *card);
static CsrResult card_access_panic(card_t *card);
static CsrResult unifi_read_chip_version(card_t *card);

/*
 * ---------------------------------------------------------------------------
 *  unifi_alloc_card
 *
 *      Allocate and initialise the card context structure.
 *
 *  Arguments:
 *      sdio            Pointer to SDIO context pointer to pass to low
 *                      level i/o functions.
 *      ospriv          Pointer to O/S private struct to pass when calling
 *                      callbacks to the higher level system.
 *
 *  Returns:
 *      Pointer to card struct, which represents the driver context or
 *      NULL if the allocation failed.
 * ---------------------------------------------------------------------------
 */
card_t* unifi_alloc_card(CsrSdioFunction *sdio, void *ospriv)
{
    card_t *card;
    u32 i;


    card = kzalloc(sizeof(card_t), GFP_KERNEL);
    if (card == NULL)
    {
        return NULL;
    }

    card->sdio_if = sdio;
    card->ospriv  = ospriv;

    card->unifi_interrupt_seq = 1;

    /* Make these invalid. */
    card->proc_select = (u32)(-1);
    card->dmem_page = (u32)(-1);
    card->pmem_page = (u32)(-1);

    card->bh_reason_host = 0;
    card->bh_reason_unifi = 0;

    for (i = 0; i < sizeof(card->tx_q_paused_flag) / sizeof(card->tx_q_paused_flag[0]); i++)
    {
        card->tx_q_paused_flag[i] = 0;
    }
    card->memory_resources_allocated = 0;

    card->low_power_mode = UNIFI_LOW_POWER_DISABLED;
    card->periodic_wake_mode = UNIFI_PERIODIC_WAKE_HOST_DISABLED;

    card->host_state = UNIFI_HOST_STATE_AWAKE;
    card->intmode = CSR_WIFI_INTMODE_DEFAULT;

    /*
     * Memory resources for buffers are allocated when the chip is initialised
     * because we need configuration information from the firmware.
     */

    /*
     * Initialise wait queues and lists
     */
    card->fh_command_queue.q_body = card->fh_command_q_body;
    card->fh_command_queue.q_length = UNIFI_SOFT_COMMAND_Q_LENGTH;

    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        card->fh_traffic_queue[i].q_body = card->fh_traffic_q_body[i];
        card->fh_traffic_queue[i].q_length = UNIFI_SOFT_TRAFFIC_Q_LENGTH;
    }


    /* Initialise mini-coredump pointers in case no coredump buffers
     * are requested by the OS layer.
     */
    card->request_coredump_on_reset = 0;
    card->dump_next_write = NULL;
    card->dump_cur_read = NULL;
    card->dump_buf = NULL;

#ifdef UNIFI_DEBUG
    /* Determine offset of LSB in pointer for later alignment sanity check.
     * Synergy integer types have specific widths, which cause compiler
     * warnings when casting pointer types, e.g. on 64-bit systems.
     */
    {
        u32 val = 0x01234567;

        if (*((u8 *)&val) == 0x01)
        {
            card->lsb = sizeof(void *) - 1;     /* BE */
        }
        else
        {
            card->lsb = 0;                      /* LE */
        }
    }
#endif
    return card;
} /* unifi_alloc_card() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_init_card
 *
 *      Reset the hardware and perform HIP initialization
 *
 *  Arguments:
 *      card        Pointer to card struct
 *
 *  Returns:
 *      CsrResult code
 *      CSR_RESULT_SUCCESS if successful
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_init_card(card_t *card, s32 led_mask)
{
    CsrResult r;


    if (card == NULL)
    {
        return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
    }

    r = unifi_init(card);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    r = unifi_hip_init(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to start host protocol.\n");
        return r;
    }

    return CSR_RESULT_SUCCESS;
}


/*
 * ---------------------------------------------------------------------------
 *  unifi_init
 *
 *      Init the hardware.
 *
 *  Arguments:
 *      card        Pointer to card struct
 *
 *  Returns:
 *      CsrResult code
 *      CSR_RESULT_SUCCESS if successful
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_init(card_t *card)
{
    CsrResult r;
    CsrResult csrResult;

    if (card == NULL)
    {
        return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
    }

    /*
     * Disable the SDIO interrupts while initialising UniFi.
     * Re-enable them when f/w is running.
     */
    csrResult = CsrSdioInterruptDisable(card->sdio_if);
    if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
    {
        return CSR_WIFI_HIP_RESULT_NO_DEVICE;
    }

    /*
     * UniFi's PLL may start with a slow clock (~ 1 MHz) so initially
     * set the SDIO bus clock to a similar value or SDIO accesses may
     * fail.
     */
    csrResult = CsrSdioMaxBusClockFrequencySet(card->sdio_if, UNIFI_SDIO_CLOCK_SAFE_HZ);
    if (csrResult != CSR_RESULT_SUCCESS)
    {
        r = ConvertCsrSdioToCsrHipResult(card, csrResult);
        return r;
    }
    card->sdio_clock_speed = UNIFI_SDIO_CLOCK_SAFE_HZ;

    /*
     * Reset UniFi. Note, this only resets the WLAN function part of the chip,
     * the SDIO interface is not reset.
     */
    unifi_trace(card->ospriv, UDBG1, "Resetting UniFi\n");
    r = unifi_reset_hardware(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to reset UniFi\n");
        return r;
    }

    /* Reset the power save mode, to be active until the MLME-reset is complete */
    r = unifi_configure_low_power_mode(card,
                                       UNIFI_LOW_POWER_DISABLED, UNIFI_PERIODIC_WAKE_HOST_DISABLED);
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to set power save mode\n");
        return r;
    }

    /*
     * Set initial value of page registers.
     * The page registers will be maintained by unifi_read...() and
     * unifi_write...().
     */
    card->proc_select = (u32)(-1);
    card->dmem_page = (u32)(-1);
    card->pmem_page = (u32)(-1);
    r = unifi_write_direct16(card, ChipHelper_HOST_WINDOW3_PAGE(card->helper) * 2, 0);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to write SHARED_DMEM_PAGE\n");
        return r;
    }
    r = unifi_write_direct16(card, ChipHelper_HOST_WINDOW2_PAGE(card->helper) * 2, 0);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to write PROG_MEM2_PAGE\n");
        return r;
    }

    /*
     * If the driver has reset UniFi due to previous SDIO failure, this may
     * have been due to a chip watchdog reset. In this case, the driver may
     * have requested a mini-coredump which needs to be captured now the
     * SDIO interface is alive.
     */
    (void)unifi_coredump_handle_request(card);

    /*
     * Probe to see if the UniFi has ROM/flash to boot from. CSR6xxx should do.
     */
    r = firmware_present_in_flash(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r == CSR_WIFI_HIP_RESULT_NOT_FOUND)
    {
        unifi_error(card->ospriv, "No firmware found\n");
    }
    else if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Probe for Flash failed\n");
    }

    return r;
} /* unifi_init() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_download
 *
 *      Load the firmware.
 *
 *  Arguments:
 *      card        Pointer to card struct
 *      led_mask    Loader LED mask
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success
 *      CsrResult error code on failure.
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_download(card_t *card, s32 led_mask)
{
    CsrResult r;
    void *dlpriv;

    if (card == NULL)
    {
        return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
    }

    /* Set the loader led mask */
    card->loader_led_mask = led_mask;

    /* Get the firmware file information */
    unifi_trace(card->ospriv, UDBG1, "downloading firmware...\n");

    dlpriv = unifi_dl_fw_read_start(card, UNIFI_FW_STA);
    if (dlpriv == NULL)
    {
        return CSR_WIFI_HIP_RESULT_NOT_FOUND;
    }

    /* Download the firmware. */
    r = unifi_dl_firmware(card, dlpriv);
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to download firmware\n");
        return r;
    }

    /* Free the firmware file information. */
    unifi_fw_read_stop(card->ospriv, dlpriv);

    return CSR_RESULT_SUCCESS;
} /* unifi_download() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_hip_init
 *
 *      This function performs the f/w initialisation sequence as described
 *      in the Unifi Host Interface Protocol Specification.
 *      It allocates memory for host-side slot data and signal queues.
 *
 *  Arguments:
 *      card        Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success or else a CSR error code
 *
 *  Notes:
 *      The firmware must have been downloaded.
 * ---------------------------------------------------------------------------
 */
static CsrResult unifi_hip_init(card_t *card)
{
    CsrResult r;
    CsrResult csrResult;

    r = card_hw_init(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to establish communication with UniFi\n");
        return r;
    }
#ifdef CSR_PRE_ALLOC_NET_DATA
    /* if there is any preallocated netdata left from the prev session free it now */
    prealloc_netdata_free(card);
#endif
    /*
     * Allocate memory for host-side slot data and signal queues.
     * We need the config info read from the firmware to know how much
     * memory to allocate.
     */
    r = card_init_slots(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Init slots failed: %d\n", r);
        return r;
    }

    unifi_trace(card->ospriv, UDBG2, "Sending first UniFi interrupt\n");

    r = unifi_set_host_state(card, UNIFI_HOST_STATE_AWAKE);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    /* Enable the SDIO interrupts now that the f/w is running. */
    csrResult = CsrSdioInterruptEnable(card->sdio_if);
    if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
    {
        return CSR_WIFI_HIP_RESULT_NO_DEVICE;
    }

    /* Signal the UniFi to start handling messages */
    r = CardGenInt(card);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    return CSR_RESULT_SUCCESS;
} /* unifi_hip_init() */


/*
 * ---------------------------------------------------------------------------
 *  _build_sdio_config_data
 *
 *      Unpack the SDIO configuration information from a buffer read from
 *      UniFi into a host structure.
 *      The data is byte-swapped for a big-endian host if necessary by the
 *      UNPACK... macros.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      cfg_data        Destination structure to unpack into.
 *      cfg_data_buf    Source buffer to read from. This should be the raw
 *                      data read from UniFi.
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
static void _build_sdio_config_data(sdio_config_data_t *cfg_data,
                                    const u8     *cfg_data_buf)
{
    s16 offset = 0;

    cfg_data->version = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->sdio_ctrl_offset = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->fromhost_sigbuf_handle = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->tohost_sigbuf_handle = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->num_fromhost_sig_frags = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->num_tohost_sig_frags = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->num_fromhost_data_slots = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->num_tohost_data_slots = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->data_slot_size = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->initialised = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->overlay_size = CSR_GET_UINT32_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT32;

    cfg_data->data_slot_round = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->sig_frag_size = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
    offset += SIZEOF_UINT16;

    cfg_data->tohost_signal_padding = CSR_GET_UINT16_FROM_LITTLE_ENDIAN(cfg_data_buf + offset);
} /* _build_sdio_config_data() */


/*
 * - Function ----------------------------------------------------------------
 * card_hw_init()
 *
 *      Perform the initialisation procedure described in the UniFi Host
 *      Interface Protocol document (section 3.3.8) and read the run-time
 *      configuration information from the UniFi. This is stuff like number
 *      of bulk data slots etc.
 *
 *      The card enumeration and SD initialisation has already been done by
 *      the SDIO library, see card_sdio_init().
 *
 *      The initialisation is done when firmware is ready, i.e. this may need
 *      to be called after a f/w download operation.
 *
 *      The initialisation procedure goes like this:
 *       - Wait for UniFi to start-up by polling SHARED_MAILBOX1
 *       - Find the symbol table and look up SLT_SDIO_SLOT_CONFIG
 *       - Read the config structure
 *       - Check the "SDIO initialised" flag, if not zero do a h/w reset and
 *         start again
 *       - Decide the number of bulk data slots to allocate, allocate them and
 *         set "SDIO initialised" flag (and generate an interrupt) to say so.
 *
 * Arguments:
 *      card        Pointer to card struct
 *
 * Returns:
 *      CSR_RESULT_SUCEESS on success,
 *      a CSR error code on failure
 *
 * Notes:
 *      All data in the f/w is stored in a little endian format, without any
 *      padding bytes. Every read from this memory has to be transformed in
 *      host (cpu specific) format, before it is stored in driver's parameters
 *      or/and structures. Athough unifi_card_read16() and unifi_read32() do perform
 *      the conversion internally, unifi_readn() does not.
 * ---------------------------------------------------------------------------
 */
static CsrResult card_hw_init(card_t *card)
{
    u32 slut_address;
    u16 initialised;
    u16 finger_print;
    symbol_t slut;
    sdio_config_data_t *cfg_data;
    u8 cfg_data_buf[SDIO_CONFIG_DATA_SIZE];
    CsrResult r;
    void *dlpriv;
    s16 major, minor;
    s16 search_4slut_again;
    CsrResult csrResult;

    /*
     * The device revision from the TPLMID_MANF and TPLMID_CARD fields
     * of the CIS are available as
     *   card->sdio_if->pDevice->ManfID
     *   card->sdio_if->pDevice->AppID
     */

    /*
     * Run in a loop so we can patch.
     */
    do
    {
        /* Reset these each time around the loop. */
        search_4slut_again = 0;
        cfg_data = NULL;

        r = card_wait_for_firmware_to_start(card, &slut_address);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "Firmware hasn't started\n");
            return r;
        }
        unifi_trace(card->ospriv, UDBG4, "SLUT addr 0x%lX\n", slut_address);

        /*
         * Firmware has started, but doesn't know full clock configuration yet
         * as some of the information may be in the MIB. Therefore we set an
         * initial SDIO clock speed, faster than UNIFI_SDIO_CLOCK_SAFE_HZ, for
         * the patch download and subsequent firmware initialisation, and
         * full speed UNIFI_SDIO_CLOCK_MAX_HZ will be set once the f/w tells us
         * that it is ready.
         */
        csrResult = CsrSdioMaxBusClockFrequencySet(card->sdio_if, UNIFI_SDIO_CLOCK_INIT_HZ);
        if (csrResult != CSR_RESULT_SUCCESS)
        {
            r = ConvertCsrSdioToCsrHipResult(card, csrResult);
            return r;
        }
        card->sdio_clock_speed = UNIFI_SDIO_CLOCK_INIT_HZ;

        /*
         * Check the SLUT fingerprint.
         * The slut_address is a generic pointer so we must use unifi_card_read16().
         */
        unifi_trace(card->ospriv, UDBG4, "Looking for SLUT finger print\n");
        finger_print = 0;
        r = unifi_card_read16(card, slut_address, &finger_print);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "Failed to read SLUT finger print\n");
            return r;
        }

        if (finger_print != SLUT_FINGERPRINT)
        {
            unifi_error(card->ospriv, "Failed to find Symbol lookup table fingerprint\n");
            return CSR_RESULT_FAILURE;
        }

        /* Symbol table starts imedately after the fingerprint */
        slut_address += 2;

        /* Search the table until either the end marker is found, or the
         * loading of patch firmware invalidates the current table.
         */
        while (!search_4slut_again)
        {
            u16 s;
            u32 l;

            r = unifi_card_read16(card, slut_address, &s);
            if (r != CSR_RESULT_SUCCESS)
            {
                return r;
            }
            slut_address += 2;

            if (s == CSR_SLT_END)
            {
                unifi_trace(card->ospriv, UDBG3, "  found CSR_SLT_END\n");
                break;
            }

            r = unifi_read32(card, slut_address, &l);
            if (r != CSR_RESULT_SUCCESS)
            {
                return r;
            }
            slut_address += 4;

            slut.id = s;
            slut.obj = l;

            unifi_trace(card->ospriv, UDBG3, "  found SLUT id %02d.%08lx\n", slut.id, slut.obj);
            switch (slut.id)
            {
                case CSR_SLT_SDIO_SLOT_CONFIG:
                    cfg_data = &card->config_data;
                    /*
                     * unifi_card_readn reads n bytes from the card, where data is stored
                     * in a little endian format, without any padding bytes. So, we
                     * can not just pass the cfg_data pointer or use the
                     * sizeof(sdio_config_data_t) since the structure in the host can
                     * be big endian formatted or have padding bytes for alignment.
                     * We use a char buffer to read the data from the card.
                     */
                    r = unifi_card_readn(card, slut.obj, cfg_data_buf, SDIO_CONFIG_DATA_SIZE);
                    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
                    {
                        return r;
                    }
                    if (r != CSR_RESULT_SUCCESS)
                    {
                        unifi_error(card->ospriv, "Failed to read config data\n");
                        return r;
                    }
                    /* .. and then we copy the data to the host structure */
                    _build_sdio_config_data(cfg_data, cfg_data_buf);

                    /* Make sure the from host data slots are what we expect
                        we reserve 2 for commands and there should be at least
                        1 left for each access category */
                    if ((cfg_data->num_fromhost_data_slots < UNIFI_RESERVED_COMMAND_SLOTS)
                        || (cfg_data->num_fromhost_data_slots - UNIFI_RESERVED_COMMAND_SLOTS) / UNIFI_NO_OF_TX_QS == 0)
                    {
                        unifi_error(card->ospriv, "From host data slots %d\n", cfg_data->num_fromhost_data_slots);
                        unifi_error(card->ospriv, "need to be (queues * x + 2) (UNIFI_RESERVED_COMMAND_SLOTS for commands)\n");
                        return CSR_RESULT_FAILURE;
                    }

                    /* Configure SDIO to-block-size padding */
                    if (card->sdio_io_block_pad)
                    {
                    /*
                     * Firmware limits the maximum padding size via data_slot_round.
                     * Therefore when padding to whole block sizes, the block size
                     * must be configured correctly by adjusting CSR_WIFI_HIP_SDIO_BLOCK_SIZE.
                     */
                        if (cfg_data->data_slot_round < card->sdio_io_block_size)
                        {
                            unifi_error(card->ospriv,
                                        "Configuration error: Block size of %d exceeds f/w data_slot_round of %d\n",
                                        card->sdio_io_block_size, cfg_data->data_slot_round);
                            return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
                        }

                        /*
                         * To force the To-Host signals to be rounded up to the SDIO block
                         * size, we need to write the To-Host Signal Padding Fragments
                         * field of the SDIO configuration in UniFi.
                         */
                        if ((card->sdio_io_block_size % cfg_data->sig_frag_size) != 0)
                        {
                            unifi_error(card->ospriv, "Configuration error: Can not pad to-host signals.\n");
                            return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
                        }
                        cfg_data->tohost_signal_padding = (u16) (card->sdio_io_block_size / cfg_data->sig_frag_size);
                        unifi_info(card->ospriv, "SDIO block size %d requires %d padding chunks\n",
                                   card->sdio_io_block_size, cfg_data->tohost_signal_padding);
                        r = unifi_card_write16(card, slut.obj + SDIO_TO_HOST_SIG_PADDING_OFFSET, cfg_data->tohost_signal_padding);
                        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
                        {
                            return r;
                        }
                        if (r != CSR_RESULT_SUCCESS)
                        {
                            unifi_error(card->ospriv, "Failed to write To-Host Signal Padding Fragments\n");
                            return r;
                        }
                    }

                    /* Reconstruct the Generic Pointer address of the
                     * SDIO Control Data Struct.
                     */
                    card->sdio_ctrl_addr = cfg_data->sdio_ctrl_offset | (UNIFI_SH_DMEM << 24);
                    card->init_flag_addr = slut.obj + SDIO_INIT_FLAG_OFFSET;
                    break;

                case CSR_SLT_BUILD_ID_NUMBER:
                {
                    u32 n;
                    r = unifi_read32(card, slut.obj, &n);
                    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
                    {
                        return r;
                    }
                    if (r != CSR_RESULT_SUCCESS)
                    {
                        unifi_error(card->ospriv, "Failed to read build id\n");
                        return r;
                    }
                    card->build_id = n;
                }
                break;

                case CSR_SLT_BUILD_ID_STRING:
                    r = unifi_readnz(card, slut.obj, card->build_id_string,
                                     sizeof(card->build_id_string));
                    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
                    {
                        return r;
                    }
                    if (r != CSR_RESULT_SUCCESS)
                    {
                        unifi_error(card->ospriv, "Failed to read build string\n");
                        return r;
                    }
                    break;

                case CSR_SLT_PERSISTENT_STORE_DB:
                    break;

                case CSR_SLT_BOOT_LOADER_CONTROL:

                    /* This command copies most of the station firmware
                     * image from ROM into program RAM.  It also clears
                     * out the zerod data and sets up the initialised
                     * data. */
                    r = unifi_do_loader_op(card, slut.obj + 6, UNIFI_BOOT_LOADER_LOAD_STA);
                    if (r != CSR_RESULT_SUCCESS)
                    {
                        unifi_error(card->ospriv, "Failed to write loader load image command\n");
                        return r;
                    }

                    dlpriv = unifi_dl_fw_read_start(card, UNIFI_FW_STA);

                    /* dlpriv might be NULL, we still need to do the do_loader_op step. */
                    if (dlpriv != NULL)
                    {
                    /* Download the firmware. */
                        r = unifi_dl_patch(card, dlpriv, slut.obj);

                    /* Free the firmware file information. */
                        unifi_fw_read_stop(card->ospriv, dlpriv);

                        if (r != CSR_RESULT_SUCCESS)
                        {
                            unifi_error(card->ospriv, "Failed to patch firmware\n");
                            return r;
                        }
                    }

                    /* This command starts the firmware image that we want (the
                    * station by default) with any patches required applied. */
                    r = unifi_do_loader_op(card, slut.obj + 6, UNIFI_BOOT_LOADER_RESTART);
                    if (r != CSR_RESULT_SUCCESS)
                    {
                        unifi_error(card->ospriv, "Failed to write loader restart command\n");
                        return r;
                    }

                    /* The now running patch f/w defines a new SLUT data structure -
                     * the current one is no longer valid. We must drop out of the
                     * processing loop and enumerate the new SLUT (which may appear
                     * at a different offset).
                     */
                    search_4slut_again = 1;
                    break;

                case CSR_SLT_PANIC_DATA_PHY:
                    card->panic_data_phy_addr = slut.obj;
                    break;

                case CSR_SLT_PANIC_DATA_MAC:
                    card->panic_data_mac_addr = slut.obj;
                    break;

                default:
                    /* do nothing */
                    break;
            }
        } /* while */
    } while (search_4slut_again);

    /* Did we find the Config Data ? */
    if (cfg_data == NULL)
    {
        unifi_error(card->ospriv, "Failed to find SDIO_SLOT_CONFIG Symbol\n");
        return CSR_RESULT_FAILURE;
    }

    /*
     * Has ths card already been initialised?
     * If so, return an error so we do a h/w reset and start again.
     */
    r = unifi_card_read16(card, card->init_flag_addr, &initialised);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to read init flag at %08lx\n",
                    card->init_flag_addr);
        return r;
    }
    if (initialised != 0)
    {
        return CSR_RESULT_FAILURE;
    }


    /*
     * Now check the UniFi firmware version
     */
    major = (cfg_data->version >> 8) & 0xFF;
    minor = cfg_data->version & 0xFF;
    unifi_info(card->ospriv, "UniFi f/w protocol version %d.%d (driver %d.%d)\n",
               major, minor,
               UNIFI_HIP_MAJOR_VERSION, UNIFI_HIP_MINOR_VERSION);

    unifi_info(card->ospriv, "Firmware build %u: %s\n",
               card->build_id, card->build_id_string);

    if (major != UNIFI_HIP_MAJOR_VERSION)
    {
        unifi_error(card->ospriv, "UniFi f/w protocol major version (%d) is different from driver (v%d.%d)\n",
                    major, UNIFI_HIP_MAJOR_VERSION, UNIFI_HIP_MINOR_VERSION);
#ifndef CSR_WIFI_DISABLE_HIP_VERSION_CHECK
        return CSR_RESULT_FAILURE;
#endif
    }
    if (minor < UNIFI_HIP_MINOR_VERSION)
    {
        unifi_error(card->ospriv, "UniFi f/w protocol version (v%d.%d) is older than minimum required by driver (v%d.%d).\n",
                    major, minor,
                    UNIFI_HIP_MAJOR_VERSION, UNIFI_HIP_MINOR_VERSION);
#ifndef CSR_WIFI_DISABLE_HIP_VERSION_CHECK
        return CSR_RESULT_FAILURE;
#endif
    }

    /* Read panic codes from a previous firmware panic. If the firmware has
     * not panicked since power was applied (e.g. power-off hard reset)
     * the stored panic codes will not be updated.
     */
    unifi_read_panic(card);

    return CSR_RESULT_SUCCESS;
} /* card_hw_init() */


/*
 * ---------------------------------------------------------------------------
 *  card_wait_for_unifi_to_reset
 *
 *      Waits for a reset to complete by polling the WLAN function enable
 *      bit (which is cleared on reset).
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success, CSR error code on failure.
 * ---------------------------------------------------------------------------
 */
static CsrResult card_wait_for_unifi_to_reset(card_t *card)
{
    s16 i;
    CsrResult r;
    u8 io_enable;
    CsrResult csrResult;

    r = CSR_RESULT_SUCCESS;
    for (i = 0; i < MAILBOX2_ATTEMPTS; i++)
    {
        unifi_trace(card->ospriv, UDBG1, "waiting for reset to complete, attempt %d\n", i);
        if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
        {
            /* It's quite likely that this read will timeout for the
             * first few tries - especially if we have reset via
             * DBG_RESET.
             */
#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_SDIO_TRACE)
            unifi_debug_log_to_buf("m0@%02X=", SDIO_IO_READY);
#endif
            csrResult = CsrSdioF0Read8(card->sdio_if, SDIO_IO_READY, &io_enable);
#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_SDIO_TRACE)
            if (csrResult != CSR_RESULT_SUCCESS)
            {
                unifi_debug_log_to_buf("error=%X\n", csrResult);
            }
            else
            {
                unifi_debug_log_to_buf("%X\n", io_enable);
            }
#endif
            if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
            {
                return CSR_WIFI_HIP_RESULT_NO_DEVICE;
            }
            r = CSR_RESULT_SUCCESS;
            if (csrResult != CSR_RESULT_SUCCESS)
            {
                r = ConvertCsrSdioToCsrHipResult(card, csrResult);
            }
        }
        else
        {
            r = sdio_read_f0(card, SDIO_IO_ENABLE, &io_enable);
        }
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r == CSR_RESULT_SUCCESS)
        {
            u16 mbox2;
            s16 enabled = io_enable & (1 << card->function);

            if (!enabled)
            {
                unifi_trace(card->ospriv, UDBG1,
                            "Reset complete (function %d is disabled) in ~ %u msecs\n",
                            card->function, i * MAILBOX2_TIMEOUT);

                /* Enable WLAN function and verify MAILBOX2 is zero'd */
                csrResult = CsrSdioFunctionEnable(card->sdio_if);
                if (csrResult != CSR_RESULT_SUCCESS)
                {
                    r = ConvertCsrSdioToCsrHipResult(card, csrResult);
                    unifi_error(card->ospriv, "CsrSdioFunctionEnable failed %d\n", r);
                    break;
                }
            }

            r = unifi_read_direct16(card, ChipHelper_SDIO_HIP_HANDSHAKE(card->helper) * 2, &mbox2);
            if (r != CSR_RESULT_SUCCESS)
            {
                unifi_error(card->ospriv, "read HIP_HANDSHAKE failed %d\n", r);
                break;
            }
            if (mbox2 != 0)
            {
                unifi_error(card->ospriv, "MAILBOX2 non-zero after reset (mbox2 = %04x)\n", mbox2);
                r = CSR_RESULT_FAILURE;
            }
            break;
        }
        else
        {
            if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
            {
                /* We ignore read failures for the first few reads,
                 * they are probably benign. */
                if (i > MAILBOX2_ATTEMPTS / 4)
                {
                    unifi_trace(card->ospriv, UDBG1, "Failed to read CCCR IO Ready register while polling for reset\n");
                }
            }
            else
            {
                unifi_trace(card->ospriv, UDBG1, "Failed to read CCCR IO Enable register while polling for reset\n");
            }
        }
        CsrThreadSleep(MAILBOX2_TIMEOUT);
    }

    if (r == CSR_RESULT_SUCCESS && i == MAILBOX2_ATTEMPTS)
    {
        unifi_trace(card->ospriv, UDBG1, "Timeout waiting for UniFi to complete reset\n");
        r = CSR_RESULT_FAILURE;
    }

    return r;
} /* card_wait_for_unifi_to_reset() */


/*
 * ---------------------------------------------------------------------------
 *  card_wait_for_unifi_to_disable
 *
 *      Waits for the function to become disabled by polling the
 *      IO_READY bit.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success, CSR error code on failure.
 *
 *  Notes: This function can only be used with
 *         card->chip_id > SDIO_CARD_ID_UNIFI_2
 * ---------------------------------------------------------------------------
 */
static CsrResult card_wait_for_unifi_to_disable(card_t *card)
{
    s16 i;
    CsrResult r;
    u8 io_enable;
    CsrResult csrResult;

    if (card->chip_id <= SDIO_CARD_ID_UNIFI_2)
    {
        unifi_error(card->ospriv,
                    "Function reset method not supported for chip_id=%d\n",
                    card->chip_id);
        return CSR_RESULT_FAILURE;
    }

    r = CSR_RESULT_SUCCESS;
    for (i = 0; i < MAILBOX2_ATTEMPTS; i++)
    {
        unifi_trace(card->ospriv, UDBG1, "waiting for disable to complete, attempt %d\n", i);

        /*
         * It's quite likely that this read will timeout for the
         * first few tries - especially if we have reset via
         * DBG_RESET.
         */
#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_SDIO_TRACE)
        unifi_debug_log_to_buf("r0@%02X=", SDIO_IO_READY);
#endif
        csrResult = CsrSdioF0Read8(card->sdio_if, SDIO_IO_READY, &io_enable);
#if defined (CSR_WIFI_HIP_DEBUG_OFFLINE) && defined (CSR_WIFI_HIP_SDIO_TRACE)
        if (csrResult != CSR_RESULT_SUCCESS)
        {
            unifi_debug_log_to_buf("error=%X\n", csrResult);
        }
        else
        {
            unifi_debug_log_to_buf("%X\n", io_enable);
        }
#endif
        if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
        {
            return CSR_WIFI_HIP_RESULT_NO_DEVICE;
        }
        if (csrResult == CSR_RESULT_SUCCESS)
        {
            s16 enabled = io_enable & (1 << card->function);
            r = CSR_RESULT_SUCCESS;
            if (!enabled)
            {
                unifi_trace(card->ospriv, UDBG1,
                            "Disable complete (function %d is disabled) in ~ %u msecs\n",
                            card->function, i * MAILBOX2_TIMEOUT);

                break;
            }
        }
        else
        {
            /*
             * We ignore read failures for the first few reads,
             * they are probably benign.
             */
            r = ConvertCsrSdioToCsrHipResult(card, csrResult);
            if (i > (MAILBOX2_ATTEMPTS / 4))
            {
                unifi_trace(card->ospriv, UDBG1,
                            "Failed to read CCCR IO Ready register while polling for disable\n");
            }
        }
        CsrThreadSleep(MAILBOX2_TIMEOUT);
    }

    if ((r == CSR_RESULT_SUCCESS) && (i == MAILBOX2_ATTEMPTS))
    {
        unifi_trace(card->ospriv, UDBG1, "Timeout waiting for UniFi to complete disable\n");
        r = CSR_RESULT_FAILURE;
    }

    return r;
} /* card_wait_for_unifi_to_reset() */


/*
 * ---------------------------------------------------------------------------
 *  card_wait_for_firmware_to_start
 *
 *      Polls the MAILBOX1 register for a non-zero value.
 *      Then reads MAILBOX0 and forms the two values into a 32-bit address
 *      which is returned to the caller.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      paddr           Pointer to receive the UniFi address formed
 *                      by concatenating MAILBOX1 and MAILBOX0.
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success, CSR error code on failure.
 * ---------------------------------------------------------------------------
 */
CsrResult card_wait_for_firmware_to_start(card_t *card, u32 *paddr)
{
    s32 i;
    u16 mbox0, mbox1;
    CsrResult r;

    /*
     * Wait for UniFi to initialise its data structures by polling
     * the SHARED_MAILBOX1 register.
     * Experience shows this is typically 120ms.
     */
    CsrThreadSleep(MAILBOX1_TIMEOUT);

    mbox1 = 0;
    unifi_trace(card->ospriv, UDBG1, "waiting for MAILBOX1 to be non-zero...\n");
    for (i = 0; i < MAILBOX1_ATTEMPTS; i++)
    {
        r = unifi_read_direct16(card, ChipHelper_MAILBOX1(card->helper) * 2, &mbox1);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            /* These reads can fail if UniFi isn't up yet, so try again */
            unifi_warning(card->ospriv, "Failed to read UniFi Mailbox1 register\n");
        }

        if ((r == CSR_RESULT_SUCCESS) && (mbox1 != 0))
        {
            unifi_trace(card->ospriv, UDBG1, "MAILBOX1 ready (0x%04X) in %u millisecs\n",
                        mbox1, i * MAILBOX1_TIMEOUT);

            /* Read the MAILBOX1 again in case we caught the value as it
             * changed. */
            r = unifi_read_direct16(card, ChipHelper_MAILBOX1(card->helper) * 2, &mbox1);
            if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
            {
                return r;
            }
            if (r != CSR_RESULT_SUCCESS)
            {
                unifi_error(card->ospriv, "Failed to read UniFi Mailbox1 register for second time\n");
                return r;
            }
            unifi_trace(card->ospriv, UDBG1, "MAILBOX1 value=0x%04X\n", mbox1);

            break;
        }

        CsrThreadSleep(MAILBOX1_TIMEOUT);
        if ((i % 100) == 99)
        {
            unifi_trace(card->ospriv, UDBG2, "MAILBOX1 not ready (0x%X), still trying...\n", mbox1);
        }
    }

    if ((r == CSR_RESULT_SUCCESS) && (mbox1 == 0))
    {
        unifi_trace(card->ospriv, UDBG1, "Timeout waiting for firmware to start, Mailbox1 still 0 after %d ms\n",
                    MAILBOX1_ATTEMPTS * MAILBOX1_TIMEOUT);
        return CSR_RESULT_FAILURE;
    }


    /*
     * Complete the reset handshake by setting MAILBOX2 to 0xFFFF
     */
    r = unifi_write_direct16(card, ChipHelper_SDIO_HIP_HANDSHAKE(card->helper) * 2, 0xFFFF);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to write f/w startup handshake to MAILBOX2\n");
        return r;
    }


    /*
     * Read the Symbol Look Up Table (SLUT) offset.
     * Top 16 bits are in mbox1, read the lower 16 bits from mbox0.
     */
    mbox0 = 0;
    r = unifi_read_direct16(card, ChipHelper_MAILBOX0(card->helper) * 2, &mbox0);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to read UniFi Mailbox0 register\n");
        return r;
    }

    *paddr = (((u32)mbox1 << 16) | mbox0);

    return CSR_RESULT_SUCCESS;
} /* card_wait_for_firmware_to_start() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_capture_panic
 *
 *      Attempt to capture panic codes from the firmware. This may involve
 *      warm reset of the chip to regain access following a watchdog reset.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS if panic codes were captured, or none available
 *      CSR_RESULT_FAILURE if the driver could not access function 1
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_capture_panic(card_t *card)
{

    /* The firmware must have previously initialised to read the panic addresses
     * from the SLUT
     */
    if (!card->panic_data_phy_addr || !card->panic_data_mac_addr)
    {
        return CSR_RESULT_SUCCESS;
    }

    /* Ensure we can access function 1 following a panic/watchdog reset */
    if (card_access_panic(card) == CSR_RESULT_SUCCESS)
    {
        /* Read the panic codes */
        unifi_read_panic(card);
    }
    else
    {
        unifi_info(card->ospriv, "Unable to read panic codes");
    }

    return CSR_RESULT_SUCCESS;
}


/*
 * ---------------------------------------------------------------------------
 *  card_access_panic
 *      Attempt to read the WLAN SDIO function in order to read panic codes
 *      and perform various reset steps to regain access if the read fails.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS if panic codes can be read
 *      CSR error code if panic codes can not be read
 * ---------------------------------------------------------------------------
 */
static CsrResult card_access_panic(card_t *card)
{
    u16 data_u16 = 0;
    s32 i;
    CsrResult r, sr;

    /* A chip version of zero means that the version never got successfully read
     * during reset. In this case give up because it will not be possible to
     * verify the chip version.
     */
    if (!card->chip_version)
    {
        unifi_info(card->ospriv, "Unknown chip version\n");
        return CSR_RESULT_FAILURE;
    }

    /* Ensure chip is awake or access to function 1 will fail */
    r = unifi_set_host_state(card, UNIFI_HOST_STATE_AWAKE);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "unifi_set_host_state() failed %d\n", r);
        return CSR_RESULT_FAILURE; /* Card is probably unpowered */
    }
    CsrThreadSleep(20);

    for (i = 0; i < 3; i++)
    {
        sr = CsrSdioRead16(card->sdio_if, CHIP_HELPER_UNIFI_GBL_CHIP_VERSION * 2, &data_u16);
        if (sr != CSR_RESULT_SUCCESS || data_u16 != card->chip_version)
        {
            unifi_info(card->ospriv, "Failed to read valid chip version sr=%d (0x%04x want 0x%04x) try %d\n",
                       sr, data_u16, card->chip_version, i);

            /* Set clock speed low */
            sr = CsrSdioMaxBusClockFrequencySet(card->sdio_if, UNIFI_SDIO_CLOCK_SAFE_HZ);
            if (sr != CSR_RESULT_SUCCESS)
            {
                unifi_error(card->ospriv, "CsrSdioMaxBusClockFrequencySet() failed1 %d\n", sr);
                r = ConvertCsrSdioToCsrHipResult(card, sr);
            }
            card->sdio_clock_speed = UNIFI_SDIO_CLOCK_SAFE_HZ;

            /* First try re-enabling function in case a f/w watchdog reset disabled it */
            if (i == 0)
            {
                unifi_info(card->ospriv, "Try function enable\n");
                sr = CsrSdioFunctionEnable(card->sdio_if);
                if (sr != CSR_RESULT_SUCCESS)
                {
                    r = ConvertCsrSdioToCsrHipResult(card, sr);
                    unifi_error(card->ospriv, "CsrSdioFunctionEnable failed %d (HIP %d)\n", sr, r);
                }
                continue;
            }

            /* Second try, set awake */
            unifi_info(card->ospriv, "Try set awake\n");

            /* Ensure chip is awake */
            r = unifi_set_host_state(card, UNIFI_HOST_STATE_AWAKE);
            if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
            {
                return r;
            }
            if (r != CSR_RESULT_SUCCESS)
            {
                unifi_error(card->ospriv, "unifi_set_host_state() failed2 %d\n", r);
            }

            /* Set clock speed low in case setting the host state raised it, which
             * would only happen if host state was previously TORPID
             */
            sr = CsrSdioMaxBusClockFrequencySet(card->sdio_if, UNIFI_SDIO_CLOCK_SAFE_HZ);
            if (sr != CSR_RESULT_SUCCESS)
            {
                unifi_error(card->ospriv, "CsrSdioMaxBusClockFrequencySet() failed2 %d\n", sr);
            }
            card->sdio_clock_speed = UNIFI_SDIO_CLOCK_SAFE_HZ;

            if (i == 1)
            {
                continue;
            }

            /* Perform a s/w reset to preserve as much as the card state as possible,
             * (mainly the preserve RAM). The context will be lost for coredump - but as we
             * were unable to access the WLAN function for panic, the coredump would have
             * also failed without a reset.
             */
            unifi_info(card->ospriv, "Try s/w reset\n");

            r = unifi_card_hard_reset(card);
            if (r != CSR_RESULT_SUCCESS)
            {
                unifi_error(card->ospriv, "unifi_card_hard_reset() failed %d\n", r);
            }
        }
        else
        {
            if (i > 0)
            {
                unifi_info(card->ospriv, "Read chip version 0x%x after %d retries\n", data_u16, i);
            }
            break;
        }
    }

    r = ConvertCsrSdioToCsrHipResult(card, sr);
    return r;
}


/*
 * ---------------------------------------------------------------------------
 *  unifi_read_panic
 *      Reads, saves and prints panic codes stored by the firmware in UniFi's
 *      preserve RAM by the last panic that occurred since chip was powered.
 *      Nothing is saved if the panic codes are read as zero.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 * ---------------------------------------------------------------------------
 */
void unifi_read_panic(card_t *card)
{
    CsrResult r;
    u16 p_code, p_arg;

    /* The firmware must have previously initialised to read the panic addresses
     * from the SLUT
     */
    if (!card->panic_data_phy_addr || !card->panic_data_mac_addr)
    {
        return;
    }

    /* Get the panic data from PHY */
    r = unifi_card_read16(card, card->panic_data_phy_addr, &p_code);
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "capture_panic: unifi_read16 %08x failed %d\n", card->panic_data_phy_addr, r);
        p_code = 0;
    }
    if (p_code)
    {
        r = unifi_card_read16(card, card->panic_data_phy_addr + 2, &p_arg);
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "capture_panic: unifi_read16 %08x failed %d\n", card->panic_data_phy_addr + 2, r);
        }
        unifi_error(card->ospriv, "Last UniFi PHY PANIC %04x arg %04x\n", p_code, p_arg);
        card->last_phy_panic_code = p_code;
        card->last_phy_panic_arg = p_arg;
    }

    /* Get the panic data from MAC */
    r = unifi_card_read16(card, card->panic_data_mac_addr, &p_code);
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "capture_panic: unifi_read16 %08x failed %d\n", card->panic_data_mac_addr, r);
        p_code = 0;
    }
    if (p_code)
    {
        r = unifi_card_read16(card, card->panic_data_mac_addr + 2, &p_arg);
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "capture_panic: unifi_read16 %08x failed %d\n", card->panic_data_mac_addr + 2, r);
        }
        unifi_error(card->ospriv, "Last UniFi MAC PANIC %04x arg %04x\n", p_code, p_arg);
        card->last_mac_panic_code = p_code;
        card->last_mac_panic_arg = p_arg;
    }

}


/*
 * ---------------------------------------------------------------------------
 *  card_allocate_memory_resources
 *
 *      Allocates memory for the from-host, to-host bulk data slots,
 *      soft queue buffers and bulk data buffers.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success, CSR error code on failure.
 * ---------------------------------------------------------------------------
 */
static CsrResult card_allocate_memory_resources(card_t *card)
{
    s16 n, i, k, r;
    sdio_config_data_t *cfg_data;

    /* Reset any state carried forward from a previous life */
    card->fh_command_queue.q_rd_ptr = 0;
    card->fh_command_queue.q_wr_ptr = 0;
    (void)scnprintf(card->fh_command_queue.name, UNIFI_QUEUE_NAME_MAX_LENGTH,
                      "fh_cmd_q");
    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        card->fh_traffic_queue[i].q_rd_ptr = 0;
        card->fh_traffic_queue[i].q_wr_ptr = 0;
        (void)scnprintf(card->fh_traffic_queue[i].name,
                          UNIFI_QUEUE_NAME_MAX_LENGTH, "fh_data_q%d", i);
    }
#ifndef CSR_WIFI_HIP_TA_DISABLE
    unifi_ta_sampling_init(card);
#endif
    /* Convenience short-cut */
    cfg_data = &card->config_data;

    /*
     * Allocate memory for the from-host and to-host signal buffers.
     */
    card->fh_buffer.buf = kmalloc(UNIFI_FH_BUF_SIZE, GFP_KERNEL);
    if (card->fh_buffer.buf == NULL)
    {
        unifi_error(card->ospriv, "Failed to allocate memory for F-H signals\n");
        return CSR_WIFI_HIP_RESULT_NO_MEMORY;
    }
    card->fh_buffer.bufsize = UNIFI_FH_BUF_SIZE;
    card->fh_buffer.ptr = card->fh_buffer.buf;
    card->fh_buffer.count = 0;

    card->th_buffer.buf = kmalloc(UNIFI_FH_BUF_SIZE, GFP_KERNEL);
    if (card->th_buffer.buf == NULL)
    {
        unifi_error(card->ospriv, "Failed to allocate memory for T-H signals\n");
        return CSR_WIFI_HIP_RESULT_NO_MEMORY;
    }
    card->th_buffer.bufsize = UNIFI_FH_BUF_SIZE;
    card->th_buffer.ptr = card->th_buffer.buf;
    card->th_buffer.count = 0;


    /*
     * Allocate memory for the from-host and to-host bulk data slots.
     * This is done as separate kmallocs because lots of smaller
     * allocations are more likely to succeed than one huge one.
     */

    /* Allocate memory for the array of pointers */
    n = cfg_data->num_fromhost_data_slots;

    unifi_trace(card->ospriv, UDBG3, "Alloc from-host resources, %d slots.\n", n);
    card->from_host_data = kmalloc(n * sizeof(slot_desc_t), GFP_KERNEL);
    if (card->from_host_data == NULL)
    {
        unifi_error(card->ospriv, "Failed to allocate memory for F-H bulk data array\n");
        return CSR_WIFI_HIP_RESULT_NO_MEMORY;
    }

    /* Initialise from-host bulk data slots */
    for (i = 0; i < n; i++)
    {
        UNIFI_INIT_BULK_DATA(&card->from_host_data[i].bd);
    }

    /* Allocate memory for the array used for slot host tag mapping */
    card->fh_slot_host_tag_record = kmalloc(n * sizeof(u32), GFP_KERNEL);

    if (card->fh_slot_host_tag_record == NULL)
    {
        unifi_error(card->ospriv, "Failed to allocate memory for F-H slot host tag mapping array\n");
        return CSR_WIFI_HIP_RESULT_NO_MEMORY;
    }

    /* Initialise host tag entries for from-host bulk data slots */
    for (i = 0; i < n; i++)
    {
        card->fh_slot_host_tag_record[i] = CSR_WIFI_HIP_RESERVED_HOST_TAG;
    }


    /* Allocate memory for the array of pointers */
    n = cfg_data->num_tohost_data_slots;

    unifi_trace(card->ospriv, UDBG3, "Alloc to-host resources, %d slots.\n", n);
    card->to_host_data = kmalloc(n * sizeof(bulk_data_desc_t), GFP_KERNEL);
    if (card->to_host_data == NULL)
    {
        unifi_error(card->ospriv, "Failed to allocate memory for T-H bulk data array\n");
        return CSR_WIFI_HIP_RESULT_NO_MEMORY;
    }

    /* Initialise to-host bulk data slots */
    for (i = 0; i < n; i++)
    {
        UNIFI_INIT_BULK_DATA(&card->to_host_data[i]);
    }

    /*
     * Initialise buffers for soft Q
     */
    for (i = 0; i < UNIFI_SOFT_COMMAND_Q_LENGTH; i++)
    {
        for (r = 0; r < UNIFI_MAX_DATA_REFERENCES; r++)
        {
            UNIFI_INIT_BULK_DATA(&card->fh_command_q_body[i].bulkdata[r]);
        }
    }

    for (k = 0; k < UNIFI_NO_OF_TX_QS; k++)
    {
        for (i = 0; i < UNIFI_SOFT_TRAFFIC_Q_LENGTH; i++)
        {
            for (r = 0; r < UNIFI_MAX_DATA_REFERENCES; r++)
            {
                UNIFI_INIT_BULK_DATA(&card->fh_traffic_q_body[k][i].bulkdata[r]);
            }
        }
    }

    card->memory_resources_allocated = 1;

    return CSR_RESULT_SUCCESS;
} /* card_allocate_memory_resources() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_free_bulk_data
 *
 *      Free the data associated to a bulk data structure.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      bulk_data_slot  Pointer to bulk data structure
 *
 *  Returns:
 *      None.
 *
 * ---------------------------------------------------------------------------
 */
static void unifi_free_bulk_data(card_t *card, bulk_data_desc_t *bulk_data_slot)
{
    if (bulk_data_slot->data_length != 0)
    {
        unifi_net_data_free(card->ospriv, bulk_data_slot);
    }
} /* unifi_free_bulk_data() */


/*
 * ---------------------------------------------------------------------------
 *  card_free_memory_resources
 *
 *      Frees memory allocated for the from-host, to-host bulk data slots,
 *      soft queue buffers and bulk data buffers.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
static void card_free_memory_resources(card_t *card)
{

    unifi_trace(card->ospriv, UDBG1, "Freeing card memory resources.\n");

    /* Clear our internal queues */
    unifi_cancel_pending_signals(card);


    kfree(card->to_host_data);
    card->to_host_data = NULL;

    kfree(card->from_host_data);
    card->from_host_data = NULL;

    /* free the memory for slot host tag mapping array */
    kfree(card->fh_slot_host_tag_record);
    card->fh_slot_host_tag_record = NULL;

    kfree(card->fh_buffer.buf);
    card->fh_buffer.ptr = card->fh_buffer.buf = NULL;
    card->fh_buffer.bufsize = 0;
    card->fh_buffer.count = 0;

    kfree(card->th_buffer.buf);
    card->th_buffer.ptr = card->th_buffer.buf = NULL;
    card->th_buffer.bufsize = 0;
    card->th_buffer.count = 0;


    card->memory_resources_allocated = 0;

} /* card_free_memory_resources() */


static void card_init_soft_queues(card_t *card)
{
    s16 i;

    unifi_trace(card->ospriv, UDBG1, "Initialising internal signal queues.\n");
    /* Reset any state carried forward from a previous life */
    card->fh_command_queue.q_rd_ptr = 0;
    card->fh_command_queue.q_wr_ptr = 0;
    (void)scnprintf(card->fh_command_queue.name, UNIFI_QUEUE_NAME_MAX_LENGTH,
                      "fh_cmd_q");
    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        card->fh_traffic_queue[i].q_rd_ptr = 0;
        card->fh_traffic_queue[i].q_wr_ptr = 0;
        (void)scnprintf(card->fh_traffic_queue[i].name,
                          UNIFI_QUEUE_NAME_MAX_LENGTH, "fh_data_q%d", i);
    }
#ifndef CSR_WIFI_HIP_TA_DISABLE
    unifi_ta_sampling_init(card);
#endif
}


/*
 * ---------------------------------------------------------------------------
 *  unifi_cancel_pending_signals
 *
 *      Free the signals and associated bulk data, pending in the core.
 *
 *  Arguments:
 *      card        Pointer to card struct
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
void unifi_cancel_pending_signals(card_t *card)
{
    s16 i, n, r;

    unifi_trace(card->ospriv, UDBG1, "Canceling pending signals.\n");

    if (card->to_host_data)
    {
        /*
         * Free any bulk data buffers allocated for the t-h slots
         * This will clear all buffers that did not make it to
         * unifi_receive_event() before cancel was request.
         */
        n = card->config_data.num_tohost_data_slots;
        unifi_trace(card->ospriv, UDBG3, "Freeing to-host resources, %d slots.\n", n);
        for (i = 0; i < n; i++)
        {
            unifi_free_bulk_data(card, &card->to_host_data[i]);
        }
    }

    /*
     * If any of the from-host bulk data has reached the card->from_host_data
     * but not UniFi, we need to free the buffers here.
     */
    if (card->from_host_data)
    {
        /* Free any bulk data buffers allocated for the f-h slots */
        n = card->config_data.num_fromhost_data_slots;
        unifi_trace(card->ospriv, UDBG3, "Freeing from-host resources, %d slots.\n", n);
        for (i = 0; i < n; i++)
        {
            unifi_free_bulk_data(card, &card->from_host_data[i].bd);
        }

        for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
        {
            card->dynamic_slot_data.from_host_used_slots[i] = 0;
            card->dynamic_slot_data.from_host_max_slots[i] = 0;
            card->dynamic_slot_data.from_host_reserved_slots[i] = 0;
        }
    }

    /*
     * Free any bulk data buffers allocated in the soft queues.
     * This covers the case where a bulk data pointer has reached the soft queue
     * but not the card->from_host_data.
     */
    unifi_trace(card->ospriv, UDBG3, "Freeing cmd q resources.\n");
    for (i = 0; i < UNIFI_SOFT_COMMAND_Q_LENGTH; i++)
    {
        for (r = 0; r < UNIFI_MAX_DATA_REFERENCES; r++)
        {
            unifi_free_bulk_data(card, &card->fh_command_q_body[i].bulkdata[r]);
        }
    }

    unifi_trace(card->ospriv, UDBG3, "Freeing traffic q resources.\n");
    for (n = 0; n < UNIFI_NO_OF_TX_QS; n++)
    {
        for (i = 0; i < UNIFI_SOFT_TRAFFIC_Q_LENGTH; i++)
        {
            for (r = 0; r < UNIFI_MAX_DATA_REFERENCES; r++)
            {
                unifi_free_bulk_data(card, &card->fh_traffic_q_body[n][i].bulkdata[r]);
            }
        }
    }

    card_init_soft_queues(card);

} /* unifi_cancel_pending_signals() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_free_card
 *
 *      Free the memory allocated for the card structure and buffers.
 *
 *  Notes:
 *      The porting layer is responsible for freeing any mini-coredump buffers
 *      allocated when it called unifi_coredump_init(), by calling
 *      unifi_coredump_free() before calling this function.
 *
 *  Arguments:
 *      card        Pointer to card struct
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
void unifi_free_card(card_t *card)
{
#ifdef CSR_PRE_ALLOC_NET_DATA
    prealloc_netdata_free(card);
#endif
    /* Free any memory allocated. */
    card_free_memory_resources(card);

    /* Warn if caller didn't free coredump buffers */
    if (card->dump_buf)
    {
        unifi_error(card->ospriv, "Caller should call unifi_coredump_free()\n");
        unifi_coredump_free(card); /* free anyway to prevent memory leak */
    }

    kfree(card);

} /* unifi_free_card() */


/*
 * ---------------------------------------------------------------------------
 *  card_init_slots
 *
 *      Allocate memory for host-side slot data and signal queues.
 *
 * Arguments:
 *      card            Pointer to card object
 *
 * Returns:
 *      CSR error code.
 * ---------------------------------------------------------------------------
 */
static CsrResult card_init_slots(card_t *card)
{
    CsrResult r;
    u8 i;

    /* Allocate the buffers we need, only once. */
    if (card->memory_resources_allocated == 1)
    {
        card_free_memory_resources(card);
    }
    else
    {
        /* Initialise our internal command and traffic queues */
        card_init_soft_queues(card);
    }

    r = card_allocate_memory_resources(card);
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to allocate card memory resources.\n");
        card_free_memory_resources(card);
        return r;
    }

    if (card->sdio_ctrl_addr == 0)
    {
        unifi_error(card->ospriv, "Failed to find config struct!\n");
        return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
    }

    /*
     * Set initial counts.
     */

    card->from_host_data_head = 0;

    /* Get initial signal counts from UniFi, in case it has not been reset. */
    {
        u16 s;

        /* Get the from-host-signals-written count */
        r = unifi_card_read16(card, card->sdio_ctrl_addr + 0, &s);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "Failed to read from-host sig written count\n");
            return r;
        }
        card->from_host_signals_w = (s16)s;

        /* Get the to-host-signals-written count */
        r = unifi_card_read16(card, card->sdio_ctrl_addr + 6, &s);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "Failed to read to-host sig read count\n");
            return r;
        }
        card->to_host_signals_r = (s16)s;
    }

    /* Set Initialised flag. */
    r = unifi_card_write16(card, card->init_flag_addr, 0x0001);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to write initialised flag\n");
        return r;
    }

    /* Dynamic queue reservation */
    memset(&card->dynamic_slot_data, 0, sizeof(card_dynamic_slot_t));

    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        card->dynamic_slot_data.from_host_max_slots[i] = card->config_data.num_fromhost_data_slots -
                                                         UNIFI_RESERVED_COMMAND_SLOTS;
        card->dynamic_slot_data.queue_stable[i] = FALSE;
    }

    card->dynamic_slot_data.packets_interval = UNIFI_PACKETS_INTERVAL;

    return CSR_RESULT_SUCCESS;
} /* card_init_slots() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_set_udi_hook
 *
 *      Registers the udi hook that reports the sent signals to the core.
 *
 *  Arguments:
 *      card            Pointer to the card context struct
 *      udi_fn          Pointer to the callback function.
 *
 *  Returns:
 *      CSR_WIFI_HIP_RESULT_INVALID_VALUE if the card pointer is invalid,
 *      CSR_RESULT_SUCCESS on success.
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_set_udi_hook(card_t *card, udi_func_t udi_fn)
{
    if (card == NULL)
    {
        return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
    }

    if (card->udi_hook == NULL)
    {
        card->udi_hook = udi_fn;
    }

    return CSR_RESULT_SUCCESS;
} /* unifi_set_udi_hook() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_remove_udi_hook
 *
 *      Removes the udi hook that reports the sent signals from the core.
 *
 *  Arguments:
 *      card            Pointer to the card context struct
 *      udi_fn          Pointer to the callback function.
 *
 *  Returns:
 *      CSR_WIFI_HIP_RESULT_INVALID_VALUE if the card pointer is invalid,
 *      CSR_RESULT_SUCCESS on success.
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_remove_udi_hook(card_t *card, udi_func_t udi_fn)
{
    if (card == NULL)
    {
        return CSR_WIFI_HIP_RESULT_INVALID_VALUE;
    }

    if (card->udi_hook == udi_fn)
    {
        card->udi_hook = NULL;
    }

    return CSR_RESULT_SUCCESS;
} /* unifi_remove_udi_hook() */


static void CardReassignDynamicReservation(card_t *card)
{
    u8 i;

    unifi_trace(card->ospriv, UDBG5, "Packets Txed %d %d %d %d\n",
                card->dynamic_slot_data.packets_txed[0],
                card->dynamic_slot_data.packets_txed[1],
                card->dynamic_slot_data.packets_txed[2],
                card->dynamic_slot_data.packets_txed[3]);

    /* Clear reservation and recalculate max slots */
    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        card->dynamic_slot_data.queue_stable[i] = FALSE;
        card->dynamic_slot_data.from_host_reserved_slots[i] = 0;
        card->dynamic_slot_data.from_host_max_slots[i] = card->config_data.num_fromhost_data_slots -
                                                         UNIFI_RESERVED_COMMAND_SLOTS;
        card->dynamic_slot_data.packets_txed[i] = 0;

        unifi_trace(card->ospriv, UDBG5, "CardReassignDynamicReservation: queue %d reserved %d Max %d\n", i,
                    card->dynamic_slot_data.from_host_reserved_slots[i],
                    card->dynamic_slot_data.from_host_max_slots[i]);
    }

    card->dynamic_slot_data.total_packets_txed = 0;
}


/* Algorithm to dynamically reserve slots. The logic is based mainly on the outstanding queue
 * length. Slots are reserved for particular queues during an interval and cleared after the interval.
 * Each queue has three associated variables.. a) used slots - the number of slots currently occupied
 * by the queue b) reserved slots - number of slots reserved specifically for the queue c) max slots - total
 * slots that this queue can actually use (may be higher than reserved slots and is dependent on reserved slots
 * for other queues).
 * This function is called when there are no slots available for a queue. It checks to see if there are enough
 * unreserved slots sufficient for this request. If available these slots are reserved for the queue.
 * If there are not enough unreserved slots, a fair share for each queue is calculated based on the total slots
 * and the number of active queues (any queue with existing reservation is considered active). Queues needing
 * less than their fair share are allowed to have the previously reserved slots. The remaining slots are
 * distributed evenly among queues that need more than the fair share
 *
 * A better scheme would take current bandwidth per AC into consideration when reserving slots. An
 * implementation scheme could consider the relative time/service period for slots in an AC. If the firmware
 * services other ACs faster than a particular AC (packets wait in the slots longer) then it is fair to reserve
 * less slots for the AC
 */
static void CardCheckDynamicReservation(card_t *card, unifi_TrafficQueue queue)
{
    u16 q_len, active_queues = 0, excess_queue_slots, div_extra_slots,
              queue_fair_share, reserved_slots = 0, q, excess_need_queues = 0, unmovable_slots = 0;
    s32 i;
    q_t *sigq;
    u16 num_data_slots = card->config_data.num_fromhost_data_slots - UNIFI_RESERVED_COMMAND_SLOTS;

    /* Calculate the pending queue length */
    sigq = &card->fh_traffic_queue[queue];
    q_len = CSR_WIFI_HIP_Q_SLOTS_USED(sigq);

    if (q_len <= card->dynamic_slot_data.from_host_reserved_slots[queue])
    {
        unifi_trace(card->ospriv, UDBG5, "queue %d q_len %d already has that many reserved slots, exiting\n", queue, q_len);
        return;
    }

    /* Upper limit */
    if (q_len > num_data_slots)
    {
        q_len = num_data_slots;
    }

    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        if (i != (s32)queue)
        {
            reserved_slots += card->dynamic_slot_data.from_host_reserved_slots[i];
        }
        if ((i == (s32)queue) || (card->dynamic_slot_data.from_host_reserved_slots[i] > 0))
        {
            active_queues++;
        }
    }

    unifi_trace(card->ospriv, UDBG5, "CardCheckDynamicReservation: queue %d q_len %d\n", queue, q_len);
    unifi_trace(card->ospriv, UDBG5, "Active queues %d reserved slots on other queues %d\n",
                active_queues, reserved_slots);

    if (reserved_slots + q_len <= num_data_slots)
    {
        card->dynamic_slot_data.from_host_reserved_slots[queue] = q_len;
        if (q_len == num_data_slots)
        {
            /* This is the common case when just 1 stream is going */
            card->dynamic_slot_data.queue_stable[queue] = TRUE;
        }
    }
    else
    {
        queue_fair_share = num_data_slots / active_queues;
        unifi_trace(card->ospriv, UDBG5, "queue fair share %d\n", queue_fair_share);

        /* Evenly distribute slots among active queues */
        /* Find out the queues that need excess of fair share. Also find slots allocated
         * to queues less than their fair share, these slots cannot be reallocated (unmovable slots) */

        card->dynamic_slot_data.from_host_reserved_slots[queue] = q_len;

        for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
        {
            if (card->dynamic_slot_data.from_host_reserved_slots[i] > queue_fair_share)
            {
                excess_need_queues++;
            }
            else
            {
                unmovable_slots += card->dynamic_slot_data.from_host_reserved_slots[i];
            }
        }

        unifi_trace(card->ospriv, UDBG5, "Excess need queues %d\n", excess_need_queues);

        /* Now find the slots per excess demand queue */
        excess_queue_slots = (num_data_slots - unmovable_slots) / excess_need_queues;
        div_extra_slots = (num_data_slots - unmovable_slots) - excess_queue_slots * excess_need_queues;
        for (i = UNIFI_NO_OF_TX_QS - 1; i >= 0; i--)
        {
            if (card->dynamic_slot_data.from_host_reserved_slots[i] > excess_queue_slots)
            {
                card->dynamic_slot_data.from_host_reserved_slots[i] = excess_queue_slots;
                if (div_extra_slots > 0)
                {
                    card->dynamic_slot_data.from_host_reserved_slots[i]++;
                    div_extra_slots--;
                }
                /* No more slots will be allocated to this queue during the current interval */
                card->dynamic_slot_data.queue_stable[i] = TRUE;
                unifi_trace(card->ospriv, UDBG5, "queue stable %d\n", i);
            }
        }
    }

    /* Redistribute max slots */
    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        reserved_slots = 0;
        for (q = 0; q < UNIFI_NO_OF_TX_QS; q++)
        {
            if (i != q)
            {
                reserved_slots += card->dynamic_slot_data.from_host_reserved_slots[q];
            }
        }

        card->dynamic_slot_data.from_host_max_slots[i] = num_data_slots - reserved_slots;
        unifi_trace(card->ospriv, UDBG5, "queue %d reserved %d Max %d\n", i,
                    card->dynamic_slot_data.from_host_reserved_slots[i],
                    card->dynamic_slot_data.from_host_max_slots[i]);
    }

}


/*
 * ---------------------------------------------------------------------------
 *  CardClearFromHostDataSlot
 *
 *      Clear a the given data slot, making it available again.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *      slot            Index of the signal slot to clear.
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
void CardClearFromHostDataSlot(card_t *card, const s16 slot)
{
    u8 queue = card->from_host_data[slot].queue;
    const void *os_data_ptr = card->from_host_data[slot].bd.os_data_ptr;

    if (card->from_host_data[slot].bd.data_length == 0)
    {
        unifi_warning(card->ospriv,
                      "Surprise: request to clear an already free FH data slot: %d\n",
                      slot);
        return;
    }

    if (os_data_ptr == NULL)
    {
        unifi_warning(card->ospriv,
                      "Clearing FH data slot %d: has null payload, len=%d\n",
                      slot, card->from_host_data[slot].bd.data_length);
    }

    /* Free card->from_host_data[slot].bd.os_net_ptr here. */
    /* Mark slot as free by setting length to 0. */
    unifi_free_bulk_data(card, &card->from_host_data[slot].bd);
    if (queue < UNIFI_NO_OF_TX_QS)
    {
        if (card->dynamic_slot_data.from_host_used_slots[queue] == 0)
        {
            unifi_error(card->ospriv, "Goofed up used slots q = %d used slots = %d\n",
                        queue,
                        card->dynamic_slot_data.from_host_used_slots[queue]);
        }
        else
        {
            card->dynamic_slot_data.from_host_used_slots[queue]--;
        }
        card->dynamic_slot_data.packets_txed[queue]++;
        card->dynamic_slot_data.total_packets_txed++;
        if (card->dynamic_slot_data.total_packets_txed >= card->dynamic_slot_data.packets_interval)
        {
            CardReassignDynamicReservation(card);
        }
    }

    unifi_trace(card->ospriv, UDBG4, "CardClearFromHostDataSlot: slot %d recycled %p\n", slot, os_data_ptr);

} /* CardClearFromHostDataSlot() */


#ifdef CSR_WIFI_REQUEUE_PACKET_TO_HAL
/*
 * ---------------------------------------------------------------------------
 *  CardClearFromHostDataSlotWithoutFreeingBulkData
 *
 *      Clear the given data slot with out freeing the bulk data.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *      slot            Index of the signal slot to clear.
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
void CardClearFromHostDataSlotWithoutFreeingBulkData(card_t *card, const s16 slot)
{
    u8 queue = card->from_host_data[slot].queue;

    /* Initialise the from_host data slot so it can be re-used,
     * Set length field in from_host_data array to 0.
     */
    UNIFI_INIT_BULK_DATA(&card->from_host_data[slot].bd);

    queue = card->from_host_data[slot].queue;

    if (queue < UNIFI_NO_OF_TX_QS)
    {
        if (card->dynamic_slot_data.from_host_used_slots[queue] == 0)
        {
            unifi_error(card->ospriv, "Goofed up used slots q = %d used slots = %d\n",
                        queue,
                        card->dynamic_slot_data.from_host_used_slots[queue]);
        }
        else
        {
            card->dynamic_slot_data.from_host_used_slots[queue]--;
        }
        card->dynamic_slot_data.packets_txed[queue]++;
        card->dynamic_slot_data.total_packets_txed++;
        if (card->dynamic_slot_data.total_packets_txed >=
            card->dynamic_slot_data.packets_interval)
        {
            CardReassignDynamicReservation(card);
        }
    }
} /* CardClearFromHostDataSlotWithoutFreeingBulkData() */


#endif

u16 CardGetDataSlotSize(card_t *card)
{
    return card->config_data.data_slot_size;
} /* CardGetDataSlotSize() */


/*
 * ---------------------------------------------------------------------------
 *  CardGetFreeFromHostDataSlots
 *
 *      Retrieve the number of from-host bulk data slots available.
 *
 *  Arguments:
 *      card            Pointer to the card context struct
 *
 *  Returns:
 *      Number of free from-host bulk data slots.
 * ---------------------------------------------------------------------------
 */
u16 CardGetFreeFromHostDataSlots(card_t *card)
{
    u16 i, n = 0;

    /* First two slots reserved for MLME */
    for (i = 0; i < card->config_data.num_fromhost_data_slots; i++)
    {
        if (card->from_host_data[i].bd.data_length == 0)
        {
            /* Free slot */
            n++;
        }
    }

    return n;
} /* CardGetFreeFromHostDataSlots() */


/*
 * ---------------------------------------------------------------------------
 *  CardAreAllFromHostDataSlotsEmpty
 *
 *      Returns the state of from-host bulk data slots.
 *
 *  Arguments:
 *      card            Pointer to the card context struct
 *
 *  Returns:
 *      1       The from-host bulk data slots are all empty (available).
 *      0       Some or all the from-host bulk data slots are in use.
 * ---------------------------------------------------------------------------
 */
u16 CardAreAllFromHostDataSlotsEmpty(card_t *card)
{
    u16 i;

    for (i = 0; i < card->config_data.num_fromhost_data_slots; i++)
    {
        if (card->from_host_data[i].bd.data_length != 0)
        {
            return 0;
        }
    }

    return 1;
} /* CardGetFreeFromHostDataSlots() */


static CsrResult unifi_identify_hw(card_t *card)
{

    card->chip_id = card->sdio_if->sdioId.cardId;
    card->function = card->sdio_if->sdioId.sdioFunction;
    card->sdio_io_block_size = card->sdio_if->blockSize;

    /* If SDIO controller doesn't support byte mode CMD53, pad transfers to block sizes */
    card->sdio_io_block_pad = (card->sdio_if->features & CSR_SDIO_FEATURE_BYTE_MODE)?FALSE : TRUE;

    /*
     * Setup the chip helper so that we can access the registers (and
     * also tell what sub-type of HIP we should use).
     */
    card->helper = ChipHelper_GetVersionSdio((u8)card->chip_id);
    if (!card->helper)
    {
        unifi_error(card->ospriv, "Null ChipHelper\n");
    }

    unifi_info(card->ospriv, "Chip ID 0x%02X  Function %u  Block Size %u  Name %s(%s)\n",
               card->chip_id, card->function, card->sdio_io_block_size,
               ChipHelper_MarketingName(card->helper),
               ChipHelper_FriendlyName(card->helper));

    return CSR_RESULT_SUCCESS;
} /* unifi_identify_hw() */


static CsrResult unifi_prepare_hw(card_t *card)
{
    CsrResult r;
    CsrResult csrResult;
    enum unifi_host_state old_state = card->host_state;

    r = unifi_identify_hw(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to identify hw\n");
        return r;
    }

    unifi_trace(card->ospriv, UDBG1,
                "%s mode SDIO\n", card->sdio_io_block_pad?"Block" : "Byte");
    /*
     * Chip must be a awake or blocks that are asleep may not get
     * reset.  We can only do this after we have read the chip_id.
     */
    r = unifi_set_host_state(card, UNIFI_HOST_STATE_AWAKE);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }

    if (old_state == UNIFI_HOST_STATE_TORPID)
    {
        /* Ensure the initial clock rate is set; if a reset occurred when the chip was
         * TORPID, unifi_set_host_state() may have raised it to MAX.
         */
        csrResult = CsrSdioMaxBusClockFrequencySet(card->sdio_if, UNIFI_SDIO_CLOCK_INIT_HZ);
        if (csrResult != CSR_RESULT_SUCCESS)
        {
            r = ConvertCsrSdioToCsrHipResult(card, csrResult);
            return r;
        }
        card->sdio_clock_speed = UNIFI_SDIO_CLOCK_INIT_HZ;
    }

    /*
     * The WLAN function must be enabled to access MAILBOX2 and DEBUG_RST
     * registers.
     */
    csrResult = CsrSdioFunctionEnable(card->sdio_if);
    if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
    {
        return CSR_WIFI_HIP_RESULT_NO_DEVICE;
    }
    if (csrResult != CSR_RESULT_SUCCESS)
    {
        r = ConvertCsrSdioToCsrHipResult(card, csrResult);
        /* Can't enable WLAN function. Try resetting the SDIO block. */
        unifi_error(card->ospriv, "Failed to re-enable function %d.\n", card->function);
        return r;
    }

    /*
     * Poke some registers to make sure the PLL has started,
     * otherwise memory accesses are likely to fail.
     */
    bootstrap_chip_hw(card);

    /* Try to read the chip version from register. */
    r = unifi_read_chip_version(card);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    return CSR_RESULT_SUCCESS;
} /* unifi_prepare_hw() */


static CsrResult unifi_read_chip_version(card_t *card)
{
    u32 gbl_chip_version;
    CsrResult r;
    u16 ver;

    gbl_chip_version = ChipHelper_GBL_CHIP_VERSION(card->helper);

    /* Try to read the chip version from register. */
    if (gbl_chip_version != 0)
    {
        r = unifi_read_direct16(card, gbl_chip_version * 2, &ver);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "Failed to read GBL_CHIP_VERSION\n");
            return r;
        }
        card->chip_version = ver;
    }
    else
    {
        unifi_info(card->ospriv, "Unknown Chip ID, cannot locate GBL_CHIP_VERSION\n");
        r = CSR_RESULT_FAILURE;
    }

    unifi_info(card->ospriv, "Chip Version 0x%04X\n", card->chip_version);

    return r;
} /* unifi_read_chip_version() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_reset_hardware
 *
 *      Execute the UniFi reset sequence.
 *
 *      Note: This may fail if the chip is going TORPID so retry at
 *      least once.
 *
 *  Arguments:
 *      card - pointer to card context structure
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success, CSR error otherwise.
 *
 *  Notes:
 *      Some platforms (e.g. Windows Vista) do not allow access to registers
 *      that are necessary for a software soft reset.
 * ---------------------------------------------------------------------------
 */
static CsrResult unifi_reset_hardware(card_t *card)
{
    CsrResult r;
    u16 new_block_size = UNIFI_IO_BLOCK_SIZE;
    CsrResult csrResult;

    /* Errors returned by unifi_prepare_hw() are not critical at this point */
    r = unifi_prepare_hw(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }

    /* First try SDIO controller reset, which may power cycle the UniFi, assert
     * its reset line, or not be implemented depending on the platform.
     */
    unifi_info(card->ospriv, "Calling CsrSdioHardReset\n");
    csrResult = CsrSdioHardReset(card->sdio_if);
    if (csrResult == CSR_RESULT_SUCCESS)
    {
        unifi_info(card->ospriv, "CsrSdioHardReset succeeded on resetting UniFi\n");
        r = unifi_prepare_hw(card);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "unifi_prepare_hw failed after hard reset\n");
            return r;
        }
    }
    else if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
    {
        return CSR_WIFI_HIP_RESULT_NO_DEVICE;
    }
    else
    {
        /* Falling back to software hard reset methods */
        unifi_info(card->ospriv, "Falling back to software hard reset\n");
        r = unifi_card_hard_reset(card);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "software hard reset failed\n");
            return r;
        }

        /* If we fell back to unifi_card_hard_reset() methods, chip version may
         * not have been read. (Note in the unlikely event that it is zero,
         * it will be harmlessly read again)
         */
        if (card->chip_version == 0)
        {
            r = unifi_read_chip_version(card);
            if (r != CSR_RESULT_SUCCESS)
            {
                return r;
            }
        }
    }

#ifdef CSR_WIFI_HIP_SDIO_BLOCK_SIZE
    new_block_size = CSR_WIFI_HIP_SDIO_BLOCK_SIZE;
#endif

    /* After hard reset, we need to restore the SDIO block size */
    csrResult = CsrSdioBlockSizeSet(card->sdio_if, new_block_size);
    r = ConvertCsrSdioToCsrHipResult(card, csrResult);

    /* Warn if a different block size was achieved by the transport */
    if (card->sdio_if->blockSize != new_block_size)
    {
        unifi_info(card->ospriv,
                   "Actually got block size %d\n", card->sdio_if->blockSize);
    }

    /* sdio_io_block_size always needs be updated from the achieved block size,
     * as it is used by the OS layer to allocate memory in unifi_net_malloc().
     * Controllers which don't support block mode (e.g. CSPI) will report a
     * block size of zero.
     */
    if (card->sdio_if->blockSize == 0)
    {
        unifi_info(card->ospriv, "Block size 0, block mode not available\n");

        /* Set sdio_io_block_size to 1 so that unifi_net_data_malloc() has a
         * sensible rounding value. Elsewhere padding will already be
         * disabled because the controller supports byte mode.
         */
        card->sdio_io_block_size = 1;

        /* Controller features must declare support for byte mode */
        if (!(card->sdio_if->features & CSR_SDIO_FEATURE_BYTE_MODE))
        {
            unifi_error(card->ospriv, "Requires byte mode\n");
            r = CSR_WIFI_HIP_RESULT_INVALID_VALUE;
        }
    }
    else
    {
        /* Padding will be enabled if CSR_SDIO_FEATURE_BYTE_MODE isn't set */
        card->sdio_io_block_size = card->sdio_if->blockSize;
    }


    return r;
} /* unifi_reset_hardware() */


/*
 * ---------------------------------------------------------------------------
 *  card_reset_method_io_enable
 *
 *      Issue a hard reset to the hw writing the IO_ENABLE.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      0 on success,
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE   if the card was ejected
 *      CSR_RESULT_FAILURE         if an SDIO error occurred or if a response
 *                                 was not seen in the expected time
 * ---------------------------------------------------------------------------
 */
static CsrResult card_reset_method_io_enable(card_t *card)
{
    CsrResult r;
    CsrResult csrResult;

    /*
     * This resets only function 1, so should be used in
     * preference to the method below (CSR_FUNC_EN)
     */
    unifi_trace(card->ospriv, UDBG1, "Hard reset (IO_ENABLE)\n");

    csrResult = CsrSdioFunctionDisable(card->sdio_if);
    if (csrResult == CSR_SDIO_RESULT_NO_DEVICE)
    {
        return CSR_WIFI_HIP_RESULT_NO_DEVICE;
    }
    if (csrResult != CSR_RESULT_SUCCESS)
    {
        r = ConvertCsrSdioToCsrHipResult(card, csrResult);
        unifi_warning(card->ospriv, "SDIO error writing IO_ENABLE: %d\n", r);
    }
    else
    {
        /* Delay here to let the reset take affect. */
        CsrThreadSleep(RESET_SETTLE_DELAY);

        r = card_wait_for_unifi_to_disable(card);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }

        if (r == CSR_RESULT_SUCCESS)
        {
            r = card_wait_for_unifi_to_reset(card);
            if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
            {
                return r;
            }
        }
    }

    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_trace(card->ospriv, UDBG1, "Hard reset (CSR_FUNC_EN)\n");

        r = sdio_write_f0(card, SDIO_CSR_FUNC_EN, 0);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_warning(card->ospriv, "SDIO error writing SDIO_CSR_FUNC_EN: %d\n", r);
            return r;
        }
        else
        {
            /* Delay here to let the reset take affect. */
            CsrThreadSleep(RESET_SETTLE_DELAY);

            r = card_wait_for_unifi_to_reset(card);
            if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
            {
                return r;
            }
        }
    }

    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_warning(card->ospriv, "card_reset_method_io_enable failed to reset UniFi\n");
    }

    return r;
} /* card_reset_method_io_enable() */


/*
 * ---------------------------------------------------------------------------
 *  card_reset_method_dbg_reset
 *
 *      Issue a hard reset to the hw writing the DBG_RESET.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS         on success,
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE   if the card was ejected
 *      CSR_RESULT_FAILURE         if an SDIO error occurred or if a response
 *                                 was not seen in the expected time
 * ---------------------------------------------------------------------------
 */
static CsrResult card_reset_method_dbg_reset(card_t *card)
{
    CsrResult r;

    /*
     * Prepare UniFi for h/w reset
     */
    if (card->host_state == UNIFI_HOST_STATE_TORPID)
    {
        r = unifi_set_host_state(card, UNIFI_HOST_STATE_DROWSY);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "Failed to set UNIFI_HOST_STATE_DROWSY\n");
            return r;
        }
        CsrThreadSleep(5);
    }

    r = unifi_card_stop_processor(card, UNIFI_PROC_BOTH);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Can't stop processors\n");
        return r;
    }

    unifi_trace(card->ospriv, UDBG1, "Hard reset (DBG_RESET)\n");

    /*
     * This register write may fail. The debug reset resets
     * parts of the Function 0 sections of the chip, and
     * therefore the response cannot be sent back to the host.
     */
    r = unifi_write_direct_8_or_16(card, ChipHelper_DBG_RESET(card->helper) * 2, 1);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_warning(card->ospriv, "SDIO error writing DBG_RESET: %d\n", r);
        return r;
    }

    /* Delay here to let the reset take affect. */
    CsrThreadSleep(RESET_SETTLE_DELAY);

    r = card_wait_for_unifi_to_reset(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_warning(card->ospriv, "card_reset_method_dbg_reset failed to reset UniFi\n");
    }

    return r;
} /* card_reset_method_dbg_reset() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_card_hard_reset
 *
 *      Issue reset to hardware, by writing to registers on the card.
 *      Power to the card is preserved.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS         on success,
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE   if the card was ejected
 *      CSR_RESULT_FAILURE         if an SDIO error occurred or if a response
 *                                 was not seen in the expected time
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_card_hard_reset(card_t *card)
{
    CsrResult r;
    const struct chip_helper_reset_values *init_data;
    u32 chunks;

    /* Clear cache of page registers */
    card->proc_select = (u32)(-1);
    card->dmem_page = (u32)(-1);
    card->pmem_page = (u32)(-1);

    /*
     * We need to have a valid card->helper before we use software hard reset.
     * If unifi_identify_hw() fails to get the card ID, it probably means
     * that there is no way to talk to the h/w.
     */
    r = unifi_identify_hw(card);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "unifi_card_hard_reset failed to identify h/w\n");
        return r;
    }

    /* Search for some reset code. */
    chunks = ChipHelper_HostResetSequence(card->helper, &init_data);
    if (chunks != 0)
    {
        unifi_error(card->ospriv,
                    "Hard reset (Code download) is unsupported\n");

        return CSR_RESULT_FAILURE;
    }

    if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
    {
        /* The HIP spec considers this a bus-specific reset.
         * This resets only function 1, so should be used in
         * preference to the method below (CSR_FUNC_EN)
         * If this method fails, it means that the f/w is probably
         * not running. In this case, try the DBG_RESET method.
         */
        r = card_reset_method_io_enable(card);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r == CSR_RESULT_SUCCESS)
        {
            return r;
        }
    }

    /* Software hard reset */
    r = card_reset_method_dbg_reset(card);

    return r;
} /* unifi_card_hard_reset() */


/*
 * ---------------------------------------------------------------------------
 *
 *  CardGenInt
 *
 *      Prod the card.
 *      This function causes an internal interrupt to be raised in the
 *      UniFi chip. It is used to signal the firmware that some action has
 *      been completed.
 *      The UniFi Host Interface asks that the value used increments for
 *      debugging purposes.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS         on success,
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE   if the card was ejected
 *      CSR_RESULT_FAILURE         if an SDIO error occurred or if a response
 *                                 was not seen in the expected time
 * ---------------------------------------------------------------------------
 */
CsrResult CardGenInt(card_t *card)
{
    CsrResult r;

    if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
    {
        r = sdio_write_f0(card, SDIO_CSR_FROM_HOST_SCRATCH0,
                          (u8)card->unifi_interrupt_seq);
    }
    else
    {
        r = unifi_write_direct_8_or_16(card,
                                       ChipHelper_SHARED_IO_INTERRUPT(card->helper) * 2,
                                       (u8)card->unifi_interrupt_seq);
    }
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error writing UNIFI_SHARED_IO_INTERRUPT: %d\n", r);
        return r;
    }

    card->unifi_interrupt_seq++;

    return CSR_RESULT_SUCCESS;
} /* CardGenInt() */


/*
 * ---------------------------------------------------------------------------
 *  CardEnableInt
 *
 *      Enable the outgoing SDIO interrupt from UniFi to the host.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS            on success,
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE      if the card was ejected
 *      CSR_RESULT_FAILURE            if an SDIO error occurred,
 * ---------------------------------------------------------------------------
 */
CsrResult CardEnableInt(card_t *card)
{
    CsrResult r;
    u8 int_enable;

    r = sdio_read_f0(card, SDIO_INT_ENABLE, &int_enable);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error reading SDIO_INT_ENABLE\n");
        return r;
    }

    int_enable |= (1 << card->function) | UNIFI_SD_INT_ENABLE_IENM;

    r = sdio_write_f0(card, SDIO_INT_ENABLE, int_enable);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error writing SDIO_INT_ENABLE\n");
        return r;
    }

    return CSR_RESULT_SUCCESS;
} /* CardEnableInt() */


/*
 * ---------------------------------------------------------------------------
 *  CardDisableInt
 *
 *      Disable the outgoing SDIO interrupt from UniFi to the host.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS            on success,
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE      if the card was ejected
 *      CSR_RESULT_FAILURE            if an SDIO error occurred,
 * ---------------------------------------------------------------------------
 */
CsrResult CardDisableInt(card_t *card)
{
    CsrResult r;
    u8 int_enable;

    r = sdio_read_f0(card, SDIO_INT_ENABLE, &int_enable);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error reading SDIO_INT_ENABLE\n");
        return r;
    }

    int_enable &= ~(1 << card->function);

    r = sdio_write_f0(card, SDIO_INT_ENABLE, int_enable);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error writing SDIO_INT_ENABLE\n");
        return r;
    }

    return CSR_RESULT_SUCCESS;
} /* CardDisableInt() */


/*
 * ---------------------------------------------------------------------------
 *  CardPendingInt
 *
 *      Determine whether UniFi is currently asserting the SDIO interrupt
 *      request.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *      pintr           Pointer to location to write interrupt status,
 *                          TRUE if interrupt pending,
 *                          FALSE if no interrupt pending.
 *  Returns:
 *      CSR_RESULT_SUCCESS            interrupt status read successfully
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE      if the card was ejected
 *      CSR_RESULT_FAILURE            if an SDIO error occurred,
 * ---------------------------------------------------------------------------
 */
CsrResult CardPendingInt(card_t *card, u8 *pintr)
{
    CsrResult r;
    u8 pending;

    *pintr = FALSE;

    r = sdio_read_f0(card, SDIO_INT_PENDING, &pending);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error reading SDIO_INT_PENDING\n");
        return r;
    }

    *pintr = (pending & (1 << card->function))?TRUE : FALSE;

    return CSR_RESULT_SUCCESS;
} /* CardPendingInt() */


/*
 * ---------------------------------------------------------------------------
 *  CardClearInt
 *
 *      Clear the UniFi SDIO interrupt request.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS          if pending interrupt was cleared, or no pending interrupt.
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE    if the card was ejected
 *      CSR_RESULT_FAILURE          if an SDIO error occurred,
 * ---------------------------------------------------------------------------
 */
CsrResult CardClearInt(card_t *card)
{
    CsrResult r;
    u8 intr;

    if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
    {
        /* CardPendingInt() sets intr, if there is a pending interrupt */
        r = CardPendingInt(card, &intr);
        if (intr == FALSE)
        {
            return r;
        }

        r = sdio_write_f0(card, SDIO_CSR_HOST_INT_CLEAR, 1);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "SDIO error writing SDIO_CSR_HOST_INT_CLEAR\n");
        }
    }
    else
    {
        r = unifi_write_direct_8_or_16(card,
                                       ChipHelper_SDIO_HOST_INT(card->helper) * 2,
                                       0);
        if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
        {
            return r;
        }
        if (r != CSR_RESULT_SUCCESS)
        {
            unifi_error(card->ospriv, "SDIO error writing UNIFI_SDIO_HOST_INT\n");
        }
    }

    return r;
} /* CardClearInt() */


/*
 * ---------------------------------------------------------------------------
 *  CardIntEnabled
 *
 *      Determine whether UniFi is currently asserting the SDIO interrupt
 *      request.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *      enabled         Pointer to location to write interrupt enable status,
 *                          TRUE if interrupts enabled,
 *                          FALSE if interupts disabled.
 *
 *  Returns:
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE      if the card was ejected
 *      CSR_RESULT_FAILURE            if an SDIO error occurred,
 * ---------------------------------------------------------------------------
 */
CsrResult CardIntEnabled(card_t *card, u8 *enabled)
{
    CsrResult r;
    u8 int_enable;

    r = sdio_read_f0(card, SDIO_INT_ENABLE, &int_enable);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "SDIO error reading SDIO_INT_ENABLE\n");
        return r;
    }

    *enabled = (int_enable & (1 << card->function))?TRUE : FALSE;

    return CSR_RESULT_SUCCESS;
} /* CardIntEnabled() */


/*
 * ---------------------------------------------------------------------------
 *  CardWriteBulkData
 *      Allocate slot in the pending bulkdata arrays and assign it to a signal's
 *      bulkdata reference. The slot is then ready for UniFi's bulkdata commands
 *      to transfer the data to/from the host.
 *
 *  Arguments:
 *      card            Pointer to Card object
 *      csptr           Pending signal pointer, including bulkdata ref
 *      queue           Traffic queue that this signal is using
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS if a free slot was assigned
 *      CSR_RESULT_FAILURE if no slot was available
 * ---------------------------------------------------------------------------
 */
CsrResult CardWriteBulkData(card_t *card, card_signal_t *csptr, unifi_TrafficQueue queue)
{
    u16 i, slots[UNIFI_MAX_DATA_REFERENCES], j = 0;
    u8 *packed_sigptr, num_slots_required = 0;
    bulk_data_desc_t *bulkdata = csptr->bulkdata;
    s16 h, nslots;

    /* Count the number of slots required */
    for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++)
    {
        if (bulkdata[i].data_length != 0)
        {
            num_slots_required++;
        }
    }

    /* Get the slot numbers */
    if (num_slots_required != 0)
    {
        /* Last 2 slots for MLME */
        if (queue == UNIFI_TRAFFIC_Q_MLME)
        {
            h = card->config_data.num_fromhost_data_slots - UNIFI_RESERVED_COMMAND_SLOTS;
            for (i = 0; i < card->config_data.num_fromhost_data_slots; i++)
            {
                if (card->from_host_data[h].bd.data_length == 0)
                {
                    /* Free data slot, claim it */
                    slots[j++] = h;
                    if (j == num_slots_required)
                    {
                        break;
                    }
                }

                if (++h >= card->config_data.num_fromhost_data_slots)
                {
                    h = 0;
                }
            }
        }
        else
        {
            if (card->dynamic_slot_data.from_host_used_slots[queue]
                < card->dynamic_slot_data.from_host_max_slots[queue])
            {
                /* Data commands get a free slot only after a few checks */
                nslots = card->config_data.num_fromhost_data_slots - UNIFI_RESERVED_COMMAND_SLOTS;

                h = card->from_host_data_head;

                for (i = 0; i < nslots; i++)
                {
                    if (card->from_host_data[h].bd.data_length == 0)
                    {
                        /* Free data slot, claim it */
                        slots[j++] = h;
                        if (j == num_slots_required)
                        {
                            break;
                        }
                    }

                    if (++h >= nslots)
                    {
                        h = 0;
                    }
                }
                card->from_host_data_head = h;
            }
        }

        /* Required number of slots are not available, bail out */
        if (j != num_slots_required)
        {
            unifi_trace(card->ospriv, UDBG5, "CardWriteBulkData: didn't find free slot/s\n");

            /* If we haven't already reached the stable state we can ask for reservation */
            if ((queue != UNIFI_TRAFFIC_Q_MLME) && (card->dynamic_slot_data.queue_stable[queue] == FALSE))
            {
                CardCheckDynamicReservation(card, queue);
            }

            for (i = 0; i < card->config_data.num_fromhost_data_slots; i++)
            {
                unifi_trace(card->ospriv, UDBG5, "fh data slot %d: %d\n", i, card->from_host_data[i].bd.data_length);
            }
            return CSR_RESULT_FAILURE;
        }
    }

    packed_sigptr = csptr->sigbuf;

    /* Fill in the slots with data */
    j = 0;
    for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++)
    {
        if (bulkdata[i].data_length == 0)
        {
            /* Zero-out the DATAREF in the signal */
            SET_PACKED_DATAREF_SLOT(packed_sigptr, i, 0);
            SET_PACKED_DATAREF_LEN(packed_sigptr, i, 0);
        }
        else
        {
            /*
             * Fill in the slot number in the SIGNAL structure but
             * preserve the offset already in there
             */
            SET_PACKED_DATAREF_SLOT(packed_sigptr, i, slots[j] | (((u16)packed_sigptr[SIZEOF_SIGNAL_HEADER + (i * SIZEOF_DATAREF) + 1]) << 8));
            SET_PACKED_DATAREF_LEN(packed_sigptr, i, bulkdata[i].data_length);

            /* Do not copy the data, just store the information to them */
            card->from_host_data[slots[j]].bd.os_data_ptr = bulkdata[i].os_data_ptr;
            card->from_host_data[slots[j]].bd.os_net_buf_ptr = bulkdata[i].os_net_buf_ptr;
            card->from_host_data[slots[j]].bd.data_length = bulkdata[i].data_length;
            card->from_host_data[slots[j]].bd.net_buf_length = bulkdata[i].net_buf_length;
            card->from_host_data[slots[j]].queue = queue;

            unifi_trace(card->ospriv, UDBG4, "CardWriteBulkData sig=0x%x, fh slot %d = %p\n",
                        GET_SIGNAL_ID(packed_sigptr), i, bulkdata[i].os_data_ptr);

            /* Sanity-check that the bulk data desc being assigned to the slot
             * actually has a payload.
             */
            if (!bulkdata[i].os_data_ptr)
            {
                unifi_error(card->ospriv, "Assign null os_data_ptr (len=%d) fh slot %d, i=%d, q=%d, sig=0x%x",
                            bulkdata[i].data_length, slots[j], i, queue, GET_SIGNAL_ID(packed_sigptr));
            }

            j++;
            if (queue < UNIFI_NO_OF_TX_QS)
            {
                card->dynamic_slot_data.from_host_used_slots[queue]++;
            }
        }
    }

    return CSR_RESULT_SUCCESS;
} /*  CardWriteBulkData() */


/*
 * ---------------------------------------------------------------------------
 *  card_find_data_slot
 *
 *      Dereference references to bulk data slots into pointers to real data.
 *
 *  Arguments:
 *      card            Pointer to the card struct.
 *      slot            Slot number from a signal structure
 *
 *  Returns:
 *      Pointer to entry in bulk_data_slot array.
 * ---------------------------------------------------------------------------
 */
bulk_data_desc_t* card_find_data_slot(card_t *card, s16 slot)
{
    s16 sn;
    bulk_data_desc_t *bd;

    sn = slot & 0x7FFF;

    /* ?? check sanity of slot number ?? */

    if (slot & SLOT_DIR_TO_HOST)
    {
        bd = &card->to_host_data[sn];
    }
    else
    {
        bd = &card->from_host_data[sn].bd;
    }

    return bd;
} /* card_find_data_slot() */


/*
 * ---------------------------------------------------------------------------
 *  firmware_present_in_flash
 *
 *      Probe for external Flash that looks like it might contain firmware.
 *
 *      If Flash is not present, reads always return 0x0008.
 *      If Flash is present, but empty, reads return 0xFFFF.
 *      Anything else is considered to be firmware.
 *
 *  Arguments:
 *      card        Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS                 firmware is present in ROM or flash
 *      CSR_WIFI_HIP_RESULT_NOT_FOUND      firmware is not present in ROM or flash
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE      if the card was ejected
 *      CSR_RESULT_FAILURE                 if an SDIO error occurred
 * ---------------------------------------------------------------------------
 */
static CsrResult firmware_present_in_flash(card_t *card)
{
    CsrResult r;
    u16 m1, m5;

    if (ChipHelper_HasRom(card->helper))
    {
        return CSR_RESULT_SUCCESS;
    }
    if (!ChipHelper_HasFlash(card->helper))
    {
        return CSR_WIFI_HIP_RESULT_NOT_FOUND;
    }

    /*
     * Examine the Flash locations that are the power-on default reset
     * vectors of the XAP processors.
     * These are words 1 and 5 in Flash.
     */
    r = unifi_card_read16(card, UNIFI_MAKE_GP(EXT_FLASH, 2), &m1);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    r = unifi_card_read16(card, UNIFI_MAKE_GP(EXT_FLASH, 10), &m5);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    /* Check for uninitialised/missing flash */
    if ((m1 == 0x0008) || (m1 == 0xFFFF) ||
        (m1 == 0x0004) || (m5 == 0x0004) ||
        (m5 == 0x0008) || (m5 == 0xFFFF))
    {
        return CSR_WIFI_HIP_RESULT_NOT_FOUND;
    }

    return CSR_RESULT_SUCCESS;
} /* firmware_present_in_flash() */


/*
 * ---------------------------------------------------------------------------
 *  bootstrap_chip_hw
 *
 *      Perform chip specific magic to "Get It Working" TM.  This will
 *      increase speed of PLLs in analogue and maybe enable some
 *      on-chip regulators.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      None.
 * ---------------------------------------------------------------------------
 */
static void bootstrap_chip_hw(card_t *card)
{
    const struct chip_helper_init_values *vals;
    u32 i, len;
    void *sdio = card->sdio_if;
    CsrResult csrResult;

    len = ChipHelper_ClockStartupSequence(card->helper, &vals);
    if (len != 0)
    {
        for (i = 0; i < len; i++)
        {
            csrResult = CsrSdioWrite16(sdio, vals[i].addr * 2, vals[i].value);
            if (csrResult != CSR_RESULT_SUCCESS)
            {
                unifi_warning(card->ospriv, "Failed to write bootstrap value %d\n", i);
                /* Might not be fatal */
            }

            CsrThreadSleep(1);
        }
    }
} /* bootstrap_chip_hw() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_card_stop_processor
 *
 *      Stop the UniFi XAP processors.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      which           One of UNIFI_PROC_MAC, UNIFI_PROC_PHY, UNIFI_PROC_BOTH
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS if successful, or CSR error code
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_card_stop_processor(card_t *card, enum unifi_dbg_processors_select which)
{
    CsrResult r = CSR_RESULT_SUCCESS;
    u8 status;
    s16 retry = 100;

    while (retry--)
    {
        /* Select both XAPs */
        r = unifi_set_proc_select(card, which);
        if (r != CSR_RESULT_SUCCESS)
        {
            break;
        }

        /* Stop processors */
        r = unifi_write_direct16(card, ChipHelper_DBG_EMU_CMD(card->helper) * 2, 2);
        if (r != CSR_RESULT_SUCCESS)
        {
            break;
        }

        /* Read status */
        r = unifi_read_direct_8_or_16(card,
                                      ChipHelper_DBG_HOST_STOP_STATUS(card->helper) * 2,
                                      &status);
        if (r != CSR_RESULT_SUCCESS)
        {
            break;
        }

        if ((status & 1) == 1)
        {
            /* Success! */
            return CSR_RESULT_SUCCESS;
        }

        /* Processors didn't stop, try again */
    }

    if (r != CSR_RESULT_SUCCESS)
    {
        /* An SDIO error occurred */
        unifi_error(card->ospriv, "Failed to stop processors: SDIO error\n");
    }
    else
    {
        /* If we reach here, we didn't the status in time. */
        unifi_error(card->ospriv, "Failed to stop processors: timeout waiting for stopped status\n");
        r = CSR_RESULT_FAILURE;
    }

    return r;
} /* unifi_card_stop_processor() */


/*
 * ---------------------------------------------------------------------------
 *  card_start_processor
 *
 *      Start the UniFi XAP processors.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      which           One of UNIFI_PROC_MAC, UNIFI_PROC_PHY, UNIFI_PROC_BOTH
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS or CSR error code
 * ---------------------------------------------------------------------------
 */
CsrResult card_start_processor(card_t *card, enum unifi_dbg_processors_select which)
{
    CsrResult r;

    /* Select both XAPs */
    r = unifi_set_proc_select(card, which);
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "unifi_set_proc_select failed: %d.\n", r);
        return r;
    }


    r = unifi_write_direct_8_or_16(card,
                                   ChipHelper_DBG_EMU_CMD(card->helper) * 2, 8);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    r = unifi_write_direct_8_or_16(card,
                                   ChipHelper_DBG_EMU_CMD(card->helper) * 2, 0);
    if (r != CSR_RESULT_SUCCESS)
    {
        return r;
    }

    return CSR_RESULT_SUCCESS;
} /* card_start_processor() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_set_interrupt_mode
 *
 *      Configure the interrupt processing mode used by the HIP
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      mode            Interrupt mode to apply
 *
 *  Returns:
 *      None
 * ---------------------------------------------------------------------------
 */
void unifi_set_interrupt_mode(card_t *card, u32 mode)
{
    if (mode == CSR_WIFI_INTMODE_RUN_BH_ONCE)
    {
        unifi_info(card->ospriv, "Scheduled interrupt mode");
    }
    card->intmode = mode;
} /* unifi_set_interrupt_mode() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_start_processors
 *
 *      Start all UniFi XAP processors.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS on success, CSR error code on error
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_start_processors(card_t *card)
{
    return card_start_processor(card, UNIFI_PROC_BOTH);
} /* unifi_start_processors() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_request_max_sdio_clock
 *
 *      Requests that the maximum SDIO clock rate is set at the next suitable
 *      opportunity (e.g. when the BH next runs, so as not to interfere with
 *      any current operation).
 *
 *  Arguments:
 *      card            Pointer to card struct
 *
 *  Returns:
 *      None
 * ---------------------------------------------------------------------------
 */
void unifi_request_max_sdio_clock(card_t *card)
{
    card->request_max_clock = 1;
} /* unifi_request_max_sdio_clock() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_set_host_state
 *
 *      Set the host deep-sleep state.
 *
 *      If transitioning to TORPID, the SDIO driver will be notified
 *      that the SD bus will be unused (idle) and conversely, when
 *      transitioning from TORPID that the bus will be used (active).
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      state           New deep-sleep state.
 *
 *  Returns:
 *      CSR_RESULT_SUCCESS            on success
 *      CSR_WIFI_HIP_RESULT_NO_DEVICE      if the card was ejected
 *      CSR_RESULT_FAILURE            if an SDIO error occurred
 *
 *  Notes:
 *      We need to reduce the SDIO clock speed before trying to wake up the
 *      chip. Actually, in the implementation below we reduce the clock speed
 *      not just before we try to wake up the chip, but when we put the chip to
 *      deep sleep. This means that if the f/w wakes up on its' own, we waste
 *      a reduce/increace cycle. However, trying to eliminate this overhead is
 *      proved difficult, as the current state machine in the HIP lib does at
 *      least a CMD52 to disable the interrupts before we configure the host
 *      state.
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_set_host_state(card_t *card, enum unifi_host_state state)
{
    CsrResult r = CSR_RESULT_SUCCESS;
    CsrResult csrResult;
    static const char *const states[] = {
        "AWAKE", "DROWSY", "TORPID"
    };
    static const u8 state_csr_host_wakeup[] = {
        1, 3, 0
    };
    static const u8 state_io_abort[] = {
        0, 2, 3
    };

    unifi_trace(card->ospriv, UDBG4, "State %s to %s\n",
                states[card->host_state], states[state]);

    if (card->host_state == UNIFI_HOST_STATE_TORPID)
    {
        CsrSdioFunctionActive(card->sdio_if);
    }

    /* Write the new state to UniFi. */
    if (card->chip_id > SDIO_CARD_ID_UNIFI_2)
    {
        r = sdio_write_f0(card, SDIO_CSR_HOST_WAKEUP,
                          (u8)((card->function << 4) | state_csr_host_wakeup[state]));
    }
    else
    {
        r = sdio_write_f0(card, SDIO_IO_ABORT, state_io_abort[state]);
    }

    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to write UniFi deep sleep state\n");
    }
    else
    {
        /*
         * If the chip was in state TORPID then we can now increase
         * the maximum bus clock speed.
         */
        if (card->host_state == UNIFI_HOST_STATE_TORPID)
        {
            csrResult = CsrSdioMaxBusClockFrequencySet(card->sdio_if,
                                                       UNIFI_SDIO_CLOCK_MAX_HZ);
            r = ConvertCsrSdioToCsrHipResult(card, csrResult);
            /* Non-fatal error */
            if (r != CSR_RESULT_SUCCESS && r != CSR_WIFI_HIP_RESULT_NO_DEVICE)
            {
                unifi_warning(card->ospriv,
                              "Failed to increase the SDIO clock speed\n");
            }
            else
            {
                card->sdio_clock_speed = UNIFI_SDIO_CLOCK_MAX_HZ;
            }
        }

        /*
         * Cache the current state in the card structure to avoid
         * unnecessary SDIO reads.
         */
        card->host_state = state;

        if (state == UNIFI_HOST_STATE_TORPID)
        {
            /*
             * If the chip is now in state TORPID then we must now decrease
             * the maximum bus clock speed.
             */
            csrResult = CsrSdioMaxBusClockFrequencySet(card->sdio_if,
                                                       UNIFI_SDIO_CLOCK_SAFE_HZ);
            r = ConvertCsrSdioToCsrHipResult(card, csrResult);
            if (r != CSR_RESULT_SUCCESS && r != CSR_WIFI_HIP_RESULT_NO_DEVICE)
            {
                unifi_warning(card->ospriv,
                              "Failed to decrease the SDIO clock speed\n");
            }
            else
            {
                card->sdio_clock_speed = UNIFI_SDIO_CLOCK_SAFE_HZ;
            }
            CsrSdioFunctionIdle(card->sdio_if);
        }
    }

    return r;
} /* unifi_set_host_state() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_card_info
 *
 *      Update the card information data structure
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      card_info       Pointer to info structure to update
 *
 *  Returns:
 *      None
 * ---------------------------------------------------------------------------
 */
void unifi_card_info(card_t *card, card_info_t *card_info)
{
    card_info->chip_id = card->chip_id;
    card_info->chip_version = card->chip_version;
    card_info->fw_build = card->build_id;
    card_info->fw_hip_version = card->config_data.version;
    card_info->sdio_block_size = card->sdio_io_block_size;
} /* unifi_card_info() */


/*
 * ---------------------------------------------------------------------------
 *  unifi_check_io_status
 *
 *      Check UniFi for spontaneous reset and pending interrupt.
 *
 *  Arguments:
 *      card            Pointer to card struct
 *      status          Pointer to location to write chip status:
 *                        0 if UniFi is running, and no interrupt pending
 *                        1 if UniFi has spontaneously reset
 *                        2 if there is a pending interrupt
 *  Returns:
 *      CSR_RESULT_SUCCESS if OK, or CSR error
 * ---------------------------------------------------------------------------
 */
CsrResult unifi_check_io_status(card_t *card, s32 *status)
{
    u8 io_en;
    CsrResult r;
    u8 pending;

    *status = 0;

    r = sdio_read_f0(card, SDIO_IO_ENABLE, &io_en);
    if (r == CSR_WIFI_HIP_RESULT_NO_DEVICE)
    {
        return r;
    }
    if (r != CSR_RESULT_SUCCESS)
    {
        unifi_error(card->ospriv, "Failed to read SDIO_IO_ENABLE to check for spontaneous reset\n");
        return r;
    }

    if ((io_en & (1 << card->function)) == 0)
    {
        s32 fw_count;
        *status = 1;
        unifi_error(card->ospriv, "UniFi has spontaneously reset.\n");

        /*
         * These reads are very likely to fail. We want to know if the function is really
         * disabled or the SDIO driver just returns rubbish.
         */
        fw_count = unifi_read_shared_count(card, card->sdio_ctrl_addr + 4);
        if (fw_count < 0)
        {
            unifi_error(card->ospriv, "Failed to read to-host sig written count\n");
        }
        else
        {
            unifi_error(card->ospriv, "thsw: %u (driver thinks is %u)\n",
                        fw_count, card->to_host_signals_w);
        }
        fw_count = unifi_read_shared_count(card, card->sdio_ctrl_addr + 2);
        if (fw_count < 0)
        {
            unifi_error(card->ospriv, "Failed to read from-host sig read count\n");
        }
        else
        {
            unifi_error(card->ospriv, "fhsr: %u (driver thinks is %u)\n",
                        fw_count, card->from_host_signals_r);
        }

        return r;
    }

    unifi_info(card->ospriv, "UniFi function %d is enabled.\n", card->function);

    /* See if we missed an SDIO interrupt */
    r = CardPendingInt(card, &pending);
    if (pending)
    {
        unifi_error(card->ospriv, "There is an unhandled pending interrupt.\n");
        *status = 2;
        return r;
    }

    return r;
} /* unifi_check_io_status() */


void unifi_get_hip_qos_info(card_t *card, unifi_HipQosInfo *hipqosinfo)
{
    s32 count_fhr;
    s16 t;
    u32 occupied_fh;

    q_t *sigq;
    u16 nslots, i;

    memset(hipqosinfo, 0, sizeof(unifi_HipQosInfo));

    nslots = card->config_data.num_fromhost_data_slots;

    for (i = 0; i < nslots; i++)
    {
        if (card->from_host_data[i].bd.data_length == 0)
        {
            hipqosinfo->free_fh_bulkdata_slots++;
        }
    }

    for (i = 0; i < UNIFI_NO_OF_TX_QS; i++)
    {
        sigq = &card->fh_traffic_queue[i];
        t = sigq->q_wr_ptr - sigq->q_rd_ptr;
        if (t < 0)
        {
            t += sigq->q_length;
        }
        hipqosinfo->free_fh_sig_queue_slots[i] = (sigq->q_length - t) - 1;
    }

    count_fhr = unifi_read_shared_count(card, card->sdio_ctrl_addr + 2);
    if (count_fhr < 0)
    {
        unifi_error(card->ospriv, "Failed to read from-host sig read count - %d\n", count_fhr);
        hipqosinfo->free_fh_fw_slots = 0xfa;
        return;
    }

    occupied_fh = (card->from_host_signals_w - count_fhr) % 128;

    hipqosinfo->free_fh_fw_slots = (u16)(card->config_data.num_fromhost_sig_frags - occupied_fh);
}



CsrResult ConvertCsrSdioToCsrHipResult(card_t *card, CsrResult csrResult)
{
    CsrResult r = CSR_RESULT_FAILURE;

    switch (csrResult)
    {
        case CSR_RESULT_SUCCESS:
            r = CSR_RESULT_SUCCESS;
            break;
        /* Timeout errors */
        case CSR_SDIO_RESULT_TIMEOUT:
        /* Integrity errors */
        case CSR_SDIO_RESULT_CRC_ERROR:
            r = CSR_RESULT_FAILURE;
            break;
        case CSR_SDIO_RESULT_NO_DEVICE:
            r = CSR_WIFI_HIP_RESULT_NO_DEVICE;
            break;
        case CSR_SDIO_RESULT_INVALID_VALUE:
            r = CSR_WIFI_HIP_RESULT_INVALID_VALUE;
            break;
        case CSR_RESULT_FAILURE:
            r = CSR_RESULT_FAILURE;
            break;
        default:
            unifi_warning(card->ospriv, "Unrecognised csrResult error code: %d\n", csrResult);
            break;
    }

    return r;
} /* ConvertCsrSdioToCsrHipResult() */