i2c-ali1535.c 15.9 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536
/*
 * Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>,
 *                      Philip Edelbrock <phil@netroedge.com>,
 *                      Mark D. Studebaker <mdsxyz123@yahoo.com>,
 *                      Dan Eaton <dan.eaton@rocketlogix.com> and
 *                      Stephen Rousset <stephen.rousset@rocketlogix.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
*/

/*
    This is the driver for the SMB Host controller on
    Acer Labs Inc. (ALI) M1535 South Bridge.

    The M1535 is a South bridge for portable systems.
    It is very similar to the M15x3 South bridges also produced
    by Acer Labs Inc.  Some of the registers within the part
    have moved and some have been redefined slightly. Additionally,
    the sequencing of the SMBus transactions has been modified
    to be more consistent with the sequencing recommended by
    the manufacturer and observed through testing.  These
    changes are reflected in this driver and can be identified
    by comparing this driver to the i2c-ali15x3 driver.
    For an overview of these chips see http://www.acerlabs.com

    The SMB controller is part of the 7101 device, which is an
    ACPI-compliant Power Management Unit (PMU).

    The whole 7101 device has to be enabled for the SMB to work.
    You can't just enable the SMB alone.
    The SMB and the ACPI have separate I/O spaces.
    We make sure that the SMB is enabled. We leave the ACPI alone.

    This driver controls the SMB Host only.

    This driver does not use interrupts.
*/


/* Note: we assume there can only be one ALI1535, with one SMBus interface */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/io.h>


/* ALI1535 SMBus address offsets */
#define SMBHSTSTS	(0 + ali1535_smba)
#define SMBHSTTYP	(1 + ali1535_smba)
#define SMBHSTPORT	(2 + ali1535_smba)
#define SMBHSTCMD	(7 + ali1535_smba)
#define SMBHSTADD	(3 + ali1535_smba)
#define SMBHSTDAT0	(4 + ali1535_smba)
#define SMBHSTDAT1	(5 + ali1535_smba)
#define SMBBLKDAT	(6 + ali1535_smba)

/* PCI Address Constants */
#define SMBCOM		0x004
#define SMBREV		0x008
#define SMBCFG		0x0D1
#define SMBBA		0x0E2
#define SMBHSTCFG	0x0F0
#define SMBCLK		0x0F2

/* Other settings */
#define MAX_TIMEOUT		500	/* times 1/100 sec */
#define ALI1535_SMB_IOSIZE	32

#define ALI1535_SMB_DEFAULTBASE	0x8040

/* ALI1535 address lock bits */
#define ALI1535_LOCK		0x06	/* dwe */

/* ALI1535 command constants */
#define ALI1535_QUICK		0x00
#define ALI1535_BYTE		0x10
#define ALI1535_BYTE_DATA	0x20
#define ALI1535_WORD_DATA	0x30
#define ALI1535_BLOCK_DATA	0x40
#define ALI1535_I2C_READ	0x60

#define	ALI1535_DEV10B_EN	0x80	/* Enable 10-bit addressing in	*/
					/*  I2C read			*/
#define	ALI1535_T_OUT		0x08	/* Time-out Command (write)	*/
#define	ALI1535_A_HIGH_BIT9	0x08	/* Bit 9 of 10-bit address in	*/
					/* Alert-Response-Address	*/
					/* (read)			*/
#define	ALI1535_KILL		0x04	/* Kill Command (write)		*/
#define	ALI1535_A_HIGH_BIT8	0x04	/* Bit 8 of 10-bit address in	*/
					/*  Alert-Response-Address	*/
					/*  (read)			*/

#define	ALI1535_D_HI_MASK	0x03	/* Mask for isolating bits 9-8	*/
					/*  of 10-bit address in I2C	*/
					/*  Read Command		*/

/* ALI1535 status register bits */
#define ALI1535_STS_IDLE	0x04
#define ALI1535_STS_BUSY	0x08	/* host busy */
#define ALI1535_STS_DONE	0x10	/* transaction complete */
#define ALI1535_STS_DEV		0x20	/* device error */
#define ALI1535_STS_BUSERR	0x40	/* bus error    */
#define ALI1535_STS_FAIL	0x80	/* failed bus transaction */
#define ALI1535_STS_ERR		0xE0	/* all the bad error bits */

#define ALI1535_BLOCK_CLR	0x04	/* reset block data index */

/* ALI1535 device address register bits */
#define	ALI1535_RD_ADDR		0x01	/* Read/Write Bit in Device	*/
					/*  Address field		*/
					/*  -> Write = 0		*/
					/*  -> Read  = 1		*/
#define	ALI1535_SMBIO_EN	0x04	/* SMB I/O Space enable		*/

static struct pci_driver ali1535_driver;
static unsigned long ali1535_smba;
static unsigned short ali1535_offset;

/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
   Note the differences between kernels with the old PCI BIOS interface and
   newer kernels with the real PCI interface. In compat.h some things are
   defined to make the transition easier. */
static int ali1535_setup(struct pci_dev *dev)
{
	int retval;
	unsigned char temp;

	/* Check the following things:
		- SMB I/O address is initialized
		- Device is enabled
		- We can use the addresses
	*/

	retval = pci_enable_device(dev);
	if (retval) {
		dev_err(&dev->dev, "ALI1535_smb can't enable device\n");
		goto exit;
	}

	/* Determine the address of the SMBus area */
	pci_read_config_word(dev, SMBBA, &ali1535_offset);
	dev_dbg(&dev->dev, "ALI1535_smb is at offset 0x%04x\n", ali1535_offset);
	ali1535_offset &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
	if (ali1535_offset == 0) {
		dev_warn(&dev->dev,
			"ALI1535_smb region uninitialized - upgrade BIOS?\n");
		retval = -ENODEV;
		goto exit;
	}

	if (pci_resource_flags(dev, 0) & IORESOURCE_IO)
		ali1535_smba = pci_resource_start(dev, 0) + ali1535_offset;
	else
		ali1535_smba = ali1535_offset;

	retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
				   ali1535_driver.name);
	if (retval)
		goto exit;

	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
			    ali1535_driver.name)) {
		dev_err(&dev->dev, "ALI1535_smb region 0x%lx already in use!\n",
			ali1535_smba);
		retval = -EBUSY;
		goto exit;
	}

	/* check if whole device is enabled */
	pci_read_config_byte(dev, SMBCFG, &temp);
	if ((temp & ALI1535_SMBIO_EN) == 0) {
		dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
		retval = -ENODEV;
		goto exit_free;
	}

	/* Is SMB Host controller enabled? */
	pci_read_config_byte(dev, SMBHSTCFG, &temp);
	if ((temp & 1) == 0) {
		dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
		retval = -ENODEV;
		goto exit_free;
	}

	/* set SMB clock to 74KHz as recommended in data sheet */
	pci_write_config_byte(dev, SMBCLK, 0x20);

	/*
	  The interrupt routing for SMB is set up in register 0x77 in the
	  1533 ISA Bridge device, NOT in the 7101 device.
	  Don't bother with finding the 1533 device and reading the register.
	if ((....... & 0x0F) == 1)
		dev_dbg(&dev->dev, "ALI1535 using Interrupt 9 for SMBus.\n");
	*/
	pci_read_config_byte(dev, SMBREV, &temp);
	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
	dev_dbg(&dev->dev, "ALI1535_smba = 0x%lx\n", ali1535_smba);

	return 0;

exit_free:
	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
exit:
	return retval;
}

static int ali1535_transaction(struct i2c_adapter *adap)
{
	int temp;
	int result = 0;
	int timeout = 0;

	dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, TYP=%02x, "
		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));

	/* get status */
	temp = inb_p(SMBHSTSTS);

	/* Make sure the SMBus host is ready to start transmitting */
	/* Check the busy bit first */
	if (temp & ALI1535_STS_BUSY) {
		/* If the host controller is still busy, it may have timed out
		 * in the previous transaction, resulting in a "SMBus Timeout"
		 * printk.  I've tried the following to reset a stuck busy bit.
		 *   1. Reset the controller with an KILL command. (this
		 *      doesn't seem to clear the controller if an external
		 *      device is hung)
		 *   2. Reset the controller and the other SMBus devices with a
		 *      T_OUT command. (this clears the host busy bit if an
		 *      external device is hung, but it comes back upon a new
		 *      access to a device)
		 *   3. Disable and reenable the controller in SMBHSTCFG. Worst
		 *      case, nothing seems to work except power reset.
		 */

		/* Try resetting entire SMB bus, including other devices - This
		 * may not work either - it clears the BUSY bit but then the
		 * BUSY bit may come back on when you try and use the chip
		 * again.  If that's the case you are stuck.
		 */
		dev_info(&adap->dev,
			"Resetting entire SMB Bus to clear busy condition (%02x)\n",
			temp);
		outb_p(ALI1535_T_OUT, SMBHSTTYP);
		temp = inb_p(SMBHSTSTS);
	}

	/* now check the error bits and the busy bit */
	if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
		/* do a clear-on-write */
		outb_p(0xFF, SMBHSTSTS);
		temp = inb_p(SMBHSTSTS);
		if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
			/* This is probably going to be correctable only by a
			 * power reset as one of the bits now appears to be
			 * stuck */
			/* This may be a bus or device with electrical problems. */
			dev_err(&adap->dev,
				"SMBus reset failed! (0x%02x) - controller or "
				"device on bus is probably hung\n", temp);
			return -EBUSY;
		}
	} else {
		/* check and clear done bit */
		if (temp & ALI1535_STS_DONE)
			outb_p(temp, SMBHSTSTS);
	}

	/* start the transaction by writing anything to the start register */
	outb_p(0xFF, SMBHSTPORT);

	/* We will always wait for a fraction of a second! */
	timeout = 0;
	do {
		usleep_range(1000, 2000);
		temp = inb_p(SMBHSTSTS);
	} while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE))
		 && (timeout++ < MAX_TIMEOUT));

	/* If the SMBus is still busy, we give up */
	if (timeout > MAX_TIMEOUT) {
		result = -ETIMEDOUT;
		dev_err(&adap->dev, "SMBus Timeout!\n");
	}

	if (temp & ALI1535_STS_FAIL) {
		result = -EIO;
		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
	}

	/* Unfortunately the ALI SMB controller maps "no response" and "bus
	 * collision" into a single bit. No response is the usual case so don't
	 * do a printk.  This means that bus collisions go unreported.
	 */
	if (temp & ALI1535_STS_BUSERR) {
		result = -ENXIO;
		dev_dbg(&adap->dev,
			"Error: no response or bus collision ADD=%02x\n",
			inb_p(SMBHSTADD));
	}

	/* haven't ever seen this */
	if (temp & ALI1535_STS_DEV) {
		result = -EIO;
		dev_err(&adap->dev, "Error: device error\n");
	}

	/* check to see if the "command complete" indication is set */
	if (!(temp & ALI1535_STS_DONE)) {
		result = -ETIMEDOUT;
		dev_err(&adap->dev, "Error: command never completed\n");
	}

	dev_dbg(&adap->dev, "Transaction (post): STS=%02x, TYP=%02x, "
		"CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
		inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD),
		inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));

	/* take consequent actions for error conditions */
	if (!(temp & ALI1535_STS_DONE)) {
		/* issue "kill" to reset host controller */
		outb_p(ALI1535_KILL, SMBHSTTYP);
		outb_p(0xFF, SMBHSTSTS);
	} else if (temp & ALI1535_STS_ERR) {
		/* issue "timeout" to reset all devices on bus */
		outb_p(ALI1535_T_OUT, SMBHSTTYP);
		outb_p(0xFF, SMBHSTSTS);
	}

	return result;
}

/* Return negative errno on error. */
static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
			  unsigned short flags, char read_write, u8 command,
			  int size, union i2c_smbus_data *data)
{
	int i, len;
	int temp;
	int timeout;
	s32 result = 0;

	/* make sure SMBus is idle */
	temp = inb_p(SMBHSTSTS);
	for (timeout = 0;
	     (timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE);
	     timeout++) {
		usleep_range(1000, 2000);
		temp = inb_p(SMBHSTSTS);
	}
	if (timeout >= MAX_TIMEOUT)
		dev_warn(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp);

	/* clear status register (clear-on-write) */
	outb_p(0xFF, SMBHSTSTS);

	switch (size) {
	case I2C_SMBUS_QUICK:
		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
		       SMBHSTADD);
		size = ALI1535_QUICK;
		outb_p(size, SMBHSTTYP);	/* output command */
		break;
	case I2C_SMBUS_BYTE:
		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
		       SMBHSTADD);
		size = ALI1535_BYTE;
		outb_p(size, SMBHSTTYP);	/* output command */
		if (read_write == I2C_SMBUS_WRITE)
			outb_p(command, SMBHSTCMD);
		break;
	case I2C_SMBUS_BYTE_DATA:
		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
		       SMBHSTADD);
		size = ALI1535_BYTE_DATA;
		outb_p(size, SMBHSTTYP);	/* output command */
		outb_p(command, SMBHSTCMD);
		if (read_write == I2C_SMBUS_WRITE)
			outb_p(data->byte, SMBHSTDAT0);
		break;
	case I2C_SMBUS_WORD_DATA:
		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
		       SMBHSTADD);
		size = ALI1535_WORD_DATA;
		outb_p(size, SMBHSTTYP);	/* output command */
		outb_p(command, SMBHSTCMD);
		if (read_write == I2C_SMBUS_WRITE) {
			outb_p(data->word & 0xff, SMBHSTDAT0);
			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
		}
		break;
	case I2C_SMBUS_BLOCK_DATA:
		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
		       SMBHSTADD);
		size = ALI1535_BLOCK_DATA;
		outb_p(size, SMBHSTTYP);	/* output command */
		outb_p(command, SMBHSTCMD);
		if (read_write == I2C_SMBUS_WRITE) {
			len = data->block[0];
			if (len < 0) {
				len = 0;
				data->block[0] = len;
			}
			if (len > 32) {
				len = 32;
				data->block[0] = len;
			}
			outb_p(len, SMBHSTDAT0);
			/* Reset SMBBLKDAT */
			outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
			for (i = 1; i <= len; i++)
				outb_p(data->block[i], SMBBLKDAT);
		}
		break;
	default:
		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
		result = -EOPNOTSUPP;
		goto EXIT;
	}

	result = ali1535_transaction(adap);
	if (result)
		goto EXIT;

	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
		result = 0;
		goto EXIT;
	}

	switch (size) {
	case ALI1535_BYTE:	/* Result put in SMBHSTDAT0 */
		data->byte = inb_p(SMBHSTDAT0);
		break;
	case ALI1535_BYTE_DATA:
		data->byte = inb_p(SMBHSTDAT0);
		break;
	case ALI1535_WORD_DATA:
		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
		break;
	case ALI1535_BLOCK_DATA:
		len = inb_p(SMBHSTDAT0);
		if (len > 32)
			len = 32;
		data->block[0] = len;
		/* Reset SMBBLKDAT */
		outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP);
		for (i = 1; i <= data->block[0]; i++) {
			data->block[i] = inb_p(SMBBLKDAT);
			dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n",
				len, i, data->block[i]);
		}
		break;
	}
EXIT:
	return result;
}


static u32 ali1535_func(struct i2c_adapter *adapter)
{
	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
	    I2C_FUNC_SMBUS_BLOCK_DATA;
}

static const struct i2c_algorithm smbus_algorithm = {
	.smbus_xfer	= ali1535_access,
	.functionality	= ali1535_func,
};

static struct i2c_adapter ali1535_adapter = {
	.owner		= THIS_MODULE,
	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
	.algo		= &smbus_algorithm,
};

static const struct pci_device_id ali1535_ids[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
	{ },
};

MODULE_DEVICE_TABLE(pci, ali1535_ids);

static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	if (ali1535_setup(dev)) {
		dev_warn(&dev->dev,
			"ALI1535 not detected, module not inserted.\n");
		return -ENODEV;
	}

	/* set up the sysfs linkage to our parent device */
	ali1535_adapter.dev.parent = &dev->dev;

	snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
		"SMBus ALI1535 adapter at %04x", ali1535_offset);
	return i2c_add_adapter(&ali1535_adapter);
}

static void ali1535_remove(struct pci_dev *dev)
{
	i2c_del_adapter(&ali1535_adapter);
	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
}

static struct pci_driver ali1535_driver = {
	.name		= "ali1535_smbus",
	.id_table	= ali1535_ids,
	.probe		= ali1535_probe,
	.remove		= ali1535_remove,
};

module_pci_driver(ali1535_driver);

MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
	      "Philip Edelbrock <phil@netroedge.com>, "
	      "Mark D. Studebaker <mdsxyz123@yahoo.com> "
	      "and Dan Eaton <dan.eaton@rocketlogix.com>");
MODULE_DESCRIPTION("ALI1535 SMBus driver");
MODULE_LICENSE("GPL");