Commit f619106bdd9d197c947f07108af57946f19a7f7e

Authored by adam radford
Committed by James Bottomley
1 parent 1e49f78505

[SCSI] 3w-sas: Add new driver for LSI 3ware 9750

[jejb: fix up for new queue depth code]
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Showing 4 changed files with 2332 additions and 0 deletions Side-by-side Diff

drivers/scsi/3w-sas.c
Changes suppressed. Click to show
  1 +/*
  2 + 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux.
  3 +
  4 + Written By: Adam Radford <linuxraid@lsi.com>
  5 +
  6 + Copyright (C) 2009 LSI Corporation.
  7 +
  8 + This program is free software; you can redistribute it and/or modify
  9 + it under the terms of the GNU General Public License as published by
  10 + the Free Software Foundation; version 2 of the License.
  11 +
  12 + This program is distributed in the hope that it will be useful,
  13 + but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15 + GNU General Public License for more details.
  16 +
  17 + NO WARRANTY
  18 + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  19 + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  20 + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  21 + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  22 + solely responsible for determining the appropriateness of using and
  23 + distributing the Program and assumes all risks associated with its
  24 + exercise of rights under this Agreement, including but not limited to
  25 + the risks and costs of program errors, damage to or loss of data,
  26 + programs or equipment, and unavailability or interruption of operations.
  27 +
  28 + DISCLAIMER OF LIABILITY
  29 + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  30 + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  31 + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  32 + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  33 + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  34 + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  35 + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  36 +
  37 + You should have received a copy of the GNU General Public License
  38 + along with this program; if not, write to the Free Software
  39 + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  40 +
  41 + Controllers supported by this driver:
  42 +
  43 + LSI 3ware 9750 6Gb/s SAS/SATA-RAID
  44 +
  45 + Bugs/Comments/Suggestions should be mailed to:
  46 + linuxraid@lsi.com
  47 +
  48 + For more information, goto:
  49 + http://www.lsi.com
  50 +
  51 + History
  52 + -------
  53 + 3.26.02.000 - Initial driver release.
  54 +*/
  55 +
  56 +#include <linux/module.h>
  57 +#include <linux/reboot.h>
  58 +#include <linux/spinlock.h>
  59 +#include <linux/interrupt.h>
  60 +#include <linux/moduleparam.h>
  61 +#include <linux/errno.h>
  62 +#include <linux/types.h>
  63 +#include <linux/delay.h>
  64 +#include <linux/pci.h>
  65 +#include <linux/time.h>
  66 +#include <linux/mutex.h>
  67 +#include <linux/smp_lock.h>
  68 +#include <asm/io.h>
  69 +#include <asm/irq.h>
  70 +#include <asm/uaccess.h>
  71 +#include <scsi/scsi.h>
  72 +#include <scsi/scsi_host.h>
  73 +#include <scsi/scsi_tcq.h>
  74 +#include <scsi/scsi_cmnd.h>
  75 +#include "3w-sas.h"
  76 +
  77 +/* Globals */
  78 +#define TW_DRIVER_VERSION "3.26.02.000"
  79 +static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT];
  80 +static unsigned int twl_device_extension_count;
  81 +static int twl_major = -1;
  82 +extern struct timezone sys_tz;
  83 +
  84 +/* Module parameters */
  85 +MODULE_AUTHOR ("LSI");
  86 +MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver");
  87 +MODULE_LICENSE("GPL");
  88 +MODULE_VERSION(TW_DRIVER_VERSION);
  89 +
  90 +static int use_msi;
  91 +module_param(use_msi, int, S_IRUGO);
  92 +MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0");
  93 +
  94 +/* Function prototypes */
  95 +static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
  96 +
  97 +/* Functions */
  98 +
  99 +/* This function returns AENs through sysfs */
  100 +static ssize_t twl_sysfs_aen_read(struct kobject *kobj,
  101 + struct bin_attribute *bin_attr,
  102 + char *outbuf, loff_t offset, size_t count)
  103 +{
  104 + struct device *dev = container_of(kobj, struct device, kobj);
  105 + struct Scsi_Host *shost = class_to_shost(dev);
  106 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata;
  107 + unsigned long flags = 0;
  108 + ssize_t ret;
  109 +
  110 + if (!capable(CAP_SYS_ADMIN))
  111 + return -EACCES;
  112 +
  113 + spin_lock_irqsave(tw_dev->host->host_lock, flags);
  114 + ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH);
  115 + spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
  116 +
  117 + return ret;
  118 +} /* End twl_sysfs_aen_read() */
  119 +
  120 +/* aen_read sysfs attribute initializer */
  121 +static struct bin_attribute twl_sysfs_aen_read_attr = {
  122 + .attr = {
  123 + .name = "3ware_aen_read",
  124 + .mode = S_IRUSR,
  125 + },
  126 + .size = 0,
  127 + .read = twl_sysfs_aen_read
  128 +};
  129 +
  130 +/* This function returns driver compatibility info through sysfs */
  131 +static ssize_t twl_sysfs_compat_info(struct kobject *kobj,
  132 + struct bin_attribute *bin_attr,
  133 + char *outbuf, loff_t offset, size_t count)
  134 +{
  135 + struct device *dev = container_of(kobj, struct device, kobj);
  136 + struct Scsi_Host *shost = class_to_shost(dev);
  137 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata;
  138 + unsigned long flags = 0;
  139 + ssize_t ret;
  140 +
  141 + if (!capable(CAP_SYS_ADMIN))
  142 + return -EACCES;
  143 +
  144 + spin_lock_irqsave(tw_dev->host->host_lock, flags);
  145 + ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
  146 + spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
  147 +
  148 + return ret;
  149 +} /* End twl_sysfs_compat_info() */
  150 +
  151 +/* compat_info sysfs attribute initializer */
  152 +static struct bin_attribute twl_sysfs_compat_info_attr = {
  153 + .attr = {
  154 + .name = "3ware_compat_info",
  155 + .mode = S_IRUSR,
  156 + },
  157 + .size = 0,
  158 + .read = twl_sysfs_compat_info
  159 +};
  160 +
  161 +/* Show some statistics about the card */
  162 +static ssize_t twl_show_stats(struct device *dev,
  163 + struct device_attribute *attr, char *buf)
  164 +{
  165 + struct Scsi_Host *host = class_to_shost(dev);
  166 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
  167 + unsigned long flags = 0;
  168 + ssize_t len;
  169 +
  170 + spin_lock_irqsave(tw_dev->host->host_lock, flags);
  171 + len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n"
  172 + "Current commands posted: %4d\n"
  173 + "Max commands posted: %4d\n"
  174 + "Last sgl length: %4d\n"
  175 + "Max sgl length: %4d\n"
  176 + "Last sector count: %4d\n"
  177 + "Max sector count: %4d\n"
  178 + "SCSI Host Resets: %4d\n"
  179 + "AEN's: %4d\n",
  180 + TW_DRIVER_VERSION,
  181 + tw_dev->posted_request_count,
  182 + tw_dev->max_posted_request_count,
  183 + tw_dev->sgl_entries,
  184 + tw_dev->max_sgl_entries,
  185 + tw_dev->sector_count,
  186 + tw_dev->max_sector_count,
  187 + tw_dev->num_resets,
  188 + tw_dev->aen_count);
  189 + spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
  190 + return len;
  191 +} /* End twl_show_stats() */
  192 +
  193 +/* This function will set a devices queue depth */
  194 +static int twl_change_queue_depth(struct scsi_device *sdev, int queue_depth,
  195 + int reason)
  196 +{
  197 + if (reason != SCSI_QDEPTH_DEFAULT)
  198 + return -EOPNOTSUPP;
  199 +
  200 + if (queue_depth > TW_Q_LENGTH-2)
  201 + queue_depth = TW_Q_LENGTH-2;
  202 + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
  203 + return queue_depth;
  204 +} /* End twl_change_queue_depth() */
  205 +
  206 +/* stats sysfs attribute initializer */
  207 +static struct device_attribute twl_host_stats_attr = {
  208 + .attr = {
  209 + .name = "3ware_stats",
  210 + .mode = S_IRUGO,
  211 + },
  212 + .show = twl_show_stats
  213 +};
  214 +
  215 +/* Host attributes initializer */
  216 +static struct device_attribute *twl_host_attrs[] = {
  217 + &twl_host_stats_attr,
  218 + NULL,
  219 +};
  220 +
  221 +/* This function will look up an AEN severity string */
  222 +static char *twl_aen_severity_lookup(unsigned char severity_code)
  223 +{
  224 + char *retval = NULL;
  225 +
  226 + if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) ||
  227 + (severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG))
  228 + goto out;
  229 +
  230 + retval = twl_aen_severity_table[severity_code];
  231 +out:
  232 + return retval;
  233 +} /* End twl_aen_severity_lookup() */
  234 +
  235 +/* This function will queue an event */
  236 +static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header)
  237 +{
  238 + u32 local_time;
  239 + struct timeval time;
  240 + TW_Event *event;
  241 + unsigned short aen;
  242 + char host[16];
  243 + char *error_str;
  244 +
  245 + tw_dev->aen_count++;
  246 +
  247 + /* Fill out event info */
  248 + event = tw_dev->event_queue[tw_dev->error_index];
  249 +
  250 + host[0] = '\0';
  251 + if (tw_dev->host)
  252 + sprintf(host, " scsi%d:", tw_dev->host->host_no);
  253 +
  254 + aen = le16_to_cpu(header->status_block.error);
  255 + memset(event, 0, sizeof(TW_Event));
  256 +
  257 + event->severity = TW_SEV_OUT(header->status_block.severity__reserved);
  258 + do_gettimeofday(&time);
  259 + local_time = (u32)(time.tv_sec - (sys_tz.tz_minuteswest * 60));
  260 + event->time_stamp_sec = local_time;
  261 + event->aen_code = aen;
  262 + event->retrieved = TW_AEN_NOT_RETRIEVED;
  263 + event->sequence_id = tw_dev->error_sequence_id;
  264 + tw_dev->error_sequence_id++;
  265 +
  266 + /* Check for embedded error string */
  267 + error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]);
  268 +
  269 + header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0';
  270 + event->parameter_len = strlen(header->err_specific_desc);
  271 + memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str));
  272 + if (event->severity != TW_AEN_SEVERITY_DEBUG)
  273 + printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
  274 + host,
  275 + twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)),
  276 + TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str,
  277 + header->err_specific_desc);
  278 + else
  279 + tw_dev->aen_count--;
  280 +
  281 + tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH;
  282 +} /* End twl_aen_queue_event() */
  283 +
  284 +/* This function will attempt to post a command packet to the board */
  285 +static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
  286 +{
  287 + dma_addr_t command_que_value;
  288 +
  289 + command_que_value = tw_dev->command_packet_phys[request_id];
  290 + command_que_value += TW_COMMAND_OFFSET;
  291 +
  292 + /* First write upper 4 bytes */
  293 + writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev));
  294 + /* Then the lower 4 bytes */
  295 + writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev));
  296 +
  297 + tw_dev->state[request_id] = TW_S_POSTED;
  298 + tw_dev->posted_request_count++;
  299 + if (tw_dev->posted_request_count > tw_dev->max_posted_request_count)
  300 + tw_dev->max_posted_request_count = tw_dev->posted_request_count;
  301 +
  302 + return 0;
  303 +} /* End twl_post_command_packet() */
  304 +
  305 +/* This function will perform a pci-dma mapping for a scatter gather list */
  306 +static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id)
  307 +{
  308 + int use_sg;
  309 + struct scsi_cmnd *cmd = tw_dev->srb[request_id];
  310 +
  311 + use_sg = scsi_dma_map(cmd);
  312 + if (!use_sg)
  313 + return 0;
  314 + else if (use_sg < 0) {
  315 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list");
  316 + return 0;
  317 + }
  318 +
  319 + cmd->SCp.phase = TW_PHASE_SGLIST;
  320 + cmd->SCp.have_data_in = use_sg;
  321 +
  322 + return use_sg;
  323 +} /* End twl_map_scsi_sg_data() */
  324 +
  325 +/* This function hands scsi cdb's to the firmware */
  326 +static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg)
  327 +{
  328 + TW_Command_Full *full_command_packet;
  329 + TW_Command_Apache *command_packet;
  330 + int i, sg_count;
  331 + struct scsi_cmnd *srb = NULL;
  332 + struct scatterlist *sglist = NULL, *sg;
  333 + int retval = 1;
  334 +
  335 + if (tw_dev->srb[request_id]) {
  336 + srb = tw_dev->srb[request_id];
  337 + if (scsi_sglist(srb))
  338 + sglist = scsi_sglist(srb);
  339 + }
  340 +
  341 + /* Initialize command packet */
  342 + full_command_packet = tw_dev->command_packet_virt[request_id];
  343 + full_command_packet->header.header_desc.size_header = 128;
  344 + full_command_packet->header.status_block.error = 0;
  345 + full_command_packet->header.status_block.severity__reserved = 0;
  346 +
  347 + command_packet = &full_command_packet->command.newcommand;
  348 + command_packet->status = 0;
  349 + command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI);
  350 +
  351 + /* We forced 16 byte cdb use earlier */
  352 + if (!cdb)
  353 + memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN);
  354 + else
  355 + memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN);
  356 +
  357 + if (srb) {
  358 + command_packet->unit = srb->device->id;
  359 + command_packet->request_id__lunl =
  360 + cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id));
  361 + } else {
  362 + command_packet->request_id__lunl =
  363 + cpu_to_le16(TW_REQ_LUN_IN(0, request_id));
  364 + command_packet->unit = 0;
  365 + }
  366 +
  367 + command_packet->sgl_offset = 16;
  368 +
  369 + if (!sglistarg) {
  370 + /* Map sglist from scsi layer to cmd packet */
  371 + if (scsi_sg_count(srb)) {
  372 + sg_count = twl_map_scsi_sg_data(tw_dev, request_id);
  373 + if (sg_count == 0)
  374 + goto out;
  375 +
  376 + scsi_for_each_sg(srb, sg, sg_count, i) {
  377 + command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg));
  378 + command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg));
  379 + }
  380 + command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id])));
  381 + }
  382 + } else {
  383 + /* Internal cdb post */
  384 + for (i = 0; i < use_sg; i++) {
  385 + command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address);
  386 + command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length);
  387 + }
  388 + command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg));
  389 + }
  390 +
  391 + /* Update some stats */
  392 + if (srb) {
  393 + tw_dev->sector_count = scsi_bufflen(srb) / 512;
  394 + if (tw_dev->sector_count > tw_dev->max_sector_count)
  395 + tw_dev->max_sector_count = tw_dev->sector_count;
  396 + tw_dev->sgl_entries = scsi_sg_count(srb);
  397 + if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
  398 + tw_dev->max_sgl_entries = tw_dev->sgl_entries;
  399 + }
  400 +
  401 + /* Now post the command to the board */
  402 + retval = twl_post_command_packet(tw_dev, request_id);
  403 +
  404 +out:
  405 + return retval;
  406 +} /* End twl_scsiop_execute_scsi() */
  407 +
  408 +/* This function will read the aen queue from the isr */
  409 +static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
  410 +{
  411 + char cdb[TW_MAX_CDB_LEN];
  412 + TW_SG_Entry_ISO sglist[1];
  413 + TW_Command_Full *full_command_packet;
  414 + int retval = 1;
  415 +
  416 + full_command_packet = tw_dev->command_packet_virt[request_id];
  417 + memset(full_command_packet, 0, sizeof(TW_Command_Full));
  418 +
  419 + /* Initialize cdb */
  420 + memset(&cdb, 0, TW_MAX_CDB_LEN);
  421 + cdb[0] = REQUEST_SENSE; /* opcode */
  422 + cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
  423 +
  424 + /* Initialize sglist */
  425 + memset(&sglist, 0, sizeof(TW_SG_Entry_ISO));
  426 + sglist[0].length = TW_SECTOR_SIZE;
  427 + sglist[0].address = tw_dev->generic_buffer_phys[request_id];
  428 +
  429 + /* Mark internal command */
  430 + tw_dev->srb[request_id] = NULL;
  431 +
  432 + /* Now post the command packet */
  433 + if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
  434 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue");
  435 + goto out;
  436 + }
  437 + retval = 0;
  438 +out:
  439 + return retval;
  440 +} /* End twl_aen_read_queue() */
  441 +
  442 +/* This function will sync firmware time with the host time */
  443 +static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id)
  444 +{
  445 + u32 schedulertime;
  446 + struct timeval utc;
  447 + TW_Command_Full *full_command_packet;
  448 + TW_Command *command_packet;
  449 + TW_Param_Apache *param;
  450 + u32 local_time;
  451 +
  452 + /* Fill out the command packet */
  453 + full_command_packet = tw_dev->command_packet_virt[request_id];
  454 + memset(full_command_packet, 0, sizeof(TW_Command_Full));
  455 + command_packet = &full_command_packet->command.oldcommand;
  456 + command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
  457 + command_packet->request_id = request_id;
  458 + command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
  459 + command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE);
  460 + command_packet->size = TW_COMMAND_SIZE;
  461 + command_packet->byte6_offset.parameter_count = cpu_to_le16(1);
  462 +
  463 + /* Setup the param */
  464 + param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
  465 + memset(param, 0, TW_SECTOR_SIZE);
  466 + param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */
  467 + param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */
  468 + param->parameter_size_bytes = cpu_to_le16(4);
  469 +
  470 + /* Convert system time in UTC to local time seconds since last
  471 + Sunday 12:00AM */
  472 + do_gettimeofday(&utc);
  473 + local_time = (u32)(utc.tv_sec - (sys_tz.tz_minuteswest * 60));
  474 + schedulertime = local_time - (3 * 86400);
  475 + schedulertime = cpu_to_le32(schedulertime % 604800);
  476 +
  477 + memcpy(param->data, &schedulertime, sizeof(u32));
  478 +
  479 + /* Mark internal command */
  480 + tw_dev->srb[request_id] = NULL;
  481 +
  482 + /* Now post the command */
  483 + twl_post_command_packet(tw_dev, request_id);
  484 +} /* End twl_aen_sync_time() */
  485 +
  486 +/* This function will assign an available request id */
  487 +static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id)
  488 +{
  489 + *request_id = tw_dev->free_queue[tw_dev->free_head];
  490 + tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
  491 + tw_dev->state[*request_id] = TW_S_STARTED;
  492 +} /* End twl_get_request_id() */
  493 +
  494 +/* This function will free a request id */
  495 +static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id)
  496 +{
  497 + tw_dev->free_queue[tw_dev->free_tail] = request_id;
  498 + tw_dev->state[request_id] = TW_S_FINISHED;
  499 + tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
  500 +} /* End twl_free_request_id() */
  501 +
  502 +/* This function will complete an aen request from the isr */
  503 +static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id)
  504 +{
  505 + TW_Command_Full *full_command_packet;
  506 + TW_Command *command_packet;
  507 + TW_Command_Apache_Header *header;
  508 + unsigned short aen;
  509 + int retval = 1;
  510 +
  511 + header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
  512 + tw_dev->posted_request_count--;
  513 + aen = le16_to_cpu(header->status_block.error);
  514 + full_command_packet = tw_dev->command_packet_virt[request_id];
  515 + command_packet = &full_command_packet->command.oldcommand;
  516 +
  517 + /* First check for internal completion of set param for time sync */
  518 + if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) {
  519 + /* Keep reading the queue in case there are more aen's */
  520 + if (twl_aen_read_queue(tw_dev, request_id))
  521 + goto out2;
  522 + else {
  523 + retval = 0;
  524 + goto out;
  525 + }
  526 + }
  527 +
  528 + switch (aen) {
  529 + case TW_AEN_QUEUE_EMPTY:
  530 + /* Quit reading the queue if this is the last one */
  531 + break;
  532 + case TW_AEN_SYNC_TIME_WITH_HOST:
  533 + twl_aen_sync_time(tw_dev, request_id);
  534 + retval = 0;
  535 + goto out;
  536 + default:
  537 + twl_aen_queue_event(tw_dev, header);
  538 +
  539 + /* If there are more aen's, keep reading the queue */
  540 + if (twl_aen_read_queue(tw_dev, request_id))
  541 + goto out2;
  542 + else {
  543 + retval = 0;
  544 + goto out;
  545 + }
  546 + }
  547 + retval = 0;
  548 +out2:
  549 + tw_dev->state[request_id] = TW_S_COMPLETED;
  550 + twl_free_request_id(tw_dev, request_id);
  551 + clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
  552 +out:
  553 + return retval;
  554 +} /* End twl_aen_complete() */
  555 +
  556 +/* This function will poll for a response */
  557 +static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds)
  558 +{
  559 + unsigned long before;
  560 + dma_addr_t mfa;
  561 + u32 regh, regl;
  562 + u32 response;
  563 + int retval = 1;
  564 + int found = 0;
  565 +
  566 + before = jiffies;
  567 +
  568 + while (!found) {
  569 + if (sizeof(dma_addr_t) > 4) {
  570 + regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev));
  571 + regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
  572 + mfa = ((u64)regh << 32) | regl;
  573 + } else
  574 + mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
  575 +
  576 + response = (u32)mfa;
  577 +
  578 + if (TW_RESID_OUT(response) == request_id)
  579 + found = 1;
  580 +
  581 + if (time_after(jiffies, before + HZ * seconds))
  582 + goto out;
  583 +
  584 + msleep(50);
  585 + }
  586 + retval = 0;
  587 +out:
  588 + return retval;
  589 +} /* End twl_poll_response() */
  590 +
  591 +/* This function will drain the aen queue */
  592 +static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
  593 +{
  594 + int request_id = 0;
  595 + char cdb[TW_MAX_CDB_LEN];
  596 + TW_SG_Entry_ISO sglist[1];
  597 + int finished = 0, count = 0;
  598 + TW_Command_Full *full_command_packet;
  599 + TW_Command_Apache_Header *header;
  600 + unsigned short aen;
  601 + int first_reset = 0, queue = 0, retval = 1;
  602 +
  603 + if (no_check_reset)
  604 + first_reset = 0;
  605 + else
  606 + first_reset = 1;
  607 +
  608 + full_command_packet = tw_dev->command_packet_virt[request_id];
  609 + memset(full_command_packet, 0, sizeof(TW_Command_Full));
  610 +
  611 + /* Initialize cdb */
  612 + memset(&cdb, 0, TW_MAX_CDB_LEN);
  613 + cdb[0] = REQUEST_SENSE; /* opcode */
  614 + cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
  615 +
  616 + /* Initialize sglist */
  617 + memset(&sglist, 0, sizeof(TW_SG_Entry_ISO));
  618 + sglist[0].length = TW_SECTOR_SIZE;
  619 + sglist[0].address = tw_dev->generic_buffer_phys[request_id];
  620 +
  621 + /* Mark internal command */
  622 + tw_dev->srb[request_id] = NULL;
  623 +
  624 + do {
  625 + /* Send command to the board */
  626 + if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
  627 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense");
  628 + goto out;
  629 + }
  630 +
  631 + /* Now poll for completion */
  632 + if (twl_poll_response(tw_dev, request_id, 30)) {
  633 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue");
  634 + tw_dev->posted_request_count--;
  635 + goto out;
  636 + }
  637 +
  638 + tw_dev->posted_request_count--;
  639 + header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
  640 + aen = le16_to_cpu(header->status_block.error);
  641 + queue = 0;
  642 + count++;
  643 +
  644 + switch (aen) {
  645 + case TW_AEN_QUEUE_EMPTY:
  646 + if (first_reset != 1)
  647 + goto out;
  648 + else
  649 + finished = 1;
  650 + break;
  651 + case TW_AEN_SOFT_RESET:
  652 + if (first_reset == 0)
  653 + first_reset = 1;
  654 + else
  655 + queue = 1;
  656 + break;
  657 + case TW_AEN_SYNC_TIME_WITH_HOST:
  658 + break;
  659 + default:
  660 + queue = 1;
  661 + }
  662 +
  663 + /* Now queue an event info */
  664 + if (queue)
  665 + twl_aen_queue_event(tw_dev, header);
  666 + } while ((finished == 0) && (count < TW_MAX_AEN_DRAIN));
  667 +
  668 + if (count == TW_MAX_AEN_DRAIN)
  669 + goto out;
  670 +
  671 + retval = 0;
  672 +out:
  673 + tw_dev->state[request_id] = TW_S_INITIAL;
  674 + return retval;
  675 +} /* End twl_aen_drain_queue() */
  676 +
  677 +/* This function will allocate memory and check if it is correctly aligned */
  678 +static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
  679 +{
  680 + int i;
  681 + dma_addr_t dma_handle;
  682 + unsigned long *cpu_addr;
  683 + int retval = 1;
  684 +
  685 + cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle);
  686 + if (!cpu_addr) {
  687 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
  688 + goto out;
  689 + }
  690 +
  691 + memset(cpu_addr, 0, size*TW_Q_LENGTH);
  692 +
  693 + for (i = 0; i < TW_Q_LENGTH; i++) {
  694 + switch(which) {
  695 + case 0:
  696 + tw_dev->command_packet_phys[i] = dma_handle+(i*size);
  697 + tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size));
  698 + break;
  699 + case 1:
  700 + tw_dev->generic_buffer_phys[i] = dma_handle+(i*size);
  701 + tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
  702 + break;
  703 + case 2:
  704 + tw_dev->sense_buffer_phys[i] = dma_handle+(i*size);
  705 + tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size));
  706 + break;
  707 + }
  708 + }
  709 + retval = 0;
  710 +out:
  711 + return retval;
  712 +} /* End twl_allocate_memory() */
  713 +
  714 +/* This function will load the request id and various sgls for ioctls */
  715 +static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length)
  716 +{
  717 + TW_Command *oldcommand;
  718 + TW_Command_Apache *newcommand;
  719 + TW_SG_Entry_ISO *sgl;
  720 + unsigned int pae = 0;
  721 +
  722 + if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
  723 + pae = 1;
  724 +
  725 + if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
  726 + newcommand = &full_command_packet->command.newcommand;
  727 + newcommand->request_id__lunl =
  728 + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
  729 + if (length) {
  730 + newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
  731 + newcommand->sg_list[0].length = TW_CPU_TO_SGL(length);
  732 + }
  733 + newcommand->sgl_entries__lunh =
  734 + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0));
  735 + } else {
  736 + oldcommand = &full_command_packet->command.oldcommand;
  737 + oldcommand->request_id = request_id;
  738 +
  739 + if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) {
  740 + /* Load the sg list */
  741 + sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0));
  742 + sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
  743 + sgl->length = TW_CPU_TO_SGL(length);
  744 + oldcommand->size += pae;
  745 + oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0;
  746 + }
  747 + }
  748 +} /* End twl_load_sgl() */
  749 +
  750 +/* This function handles ioctl for the character device
  751 + This interface is used by smartmontools open source software */
  752 +static int twl_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
  753 +{
  754 + long timeout;
  755 + unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0;
  756 + dma_addr_t dma_handle;
  757 + int request_id = 0;
  758 + TW_Ioctl_Driver_Command driver_command;
  759 + TW_Ioctl_Buf_Apache *tw_ioctl;
  760 + TW_Command_Full *full_command_packet;
  761 + TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)];
  762 + int retval = -EFAULT;
  763 + void __user *argp = (void __user *)arg;
  764 +
  765 + /* Only let one of these through at a time */
  766 + if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
  767 + retval = -EINTR;
  768 + goto out;
  769 + }
  770 +
  771 + /* First copy down the driver command */
  772 + if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command)))
  773 + goto out2;
  774 +
  775 + /* Check data buffer size */
  776 + if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
  777 + retval = -EINVAL;
  778 + goto out2;
  779 + }
  780 +
  781 + /* Hardware can only do multiple of 512 byte transfers */
  782 + data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511;
  783 +
  784 + /* Now allocate ioctl buf memory */
  785 + cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL);
  786 + if (!cpu_addr) {
  787 + retval = -ENOMEM;
  788 + goto out2;
  789 + }
  790 +
  791 + tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr;
  792 +
  793 + /* Now copy down the entire ioctl */
  794 + if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1))
  795 + goto out3;
  796 +
  797 + /* See which ioctl we are doing */
  798 + switch (cmd) {
  799 + case TW_IOCTL_FIRMWARE_PASS_THROUGH:
  800 + spin_lock_irqsave(tw_dev->host->host_lock, flags);
  801 + twl_get_request_id(tw_dev, &request_id);
  802 +
  803 + /* Flag internal command */
  804 + tw_dev->srb[request_id] = NULL;
  805 +
  806 + /* Flag chrdev ioctl */
  807 + tw_dev->chrdev_request_id = request_id;
  808 +
  809 + full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command;
  810 +
  811 + /* Load request id and sglist for both command types */
  812 + twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted);
  813 +
  814 + memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full));
  815 +
  816 + /* Now post the command packet to the controller */
  817 + twl_post_command_packet(tw_dev, request_id);
  818 + spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
  819 +
  820 + timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
  821 +
  822 + /* Now wait for command to complete */
  823 + timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
  824 +
  825 + /* We timed out, and didn't get an interrupt */
  826 + if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
  827 + /* Now we need to reset the board */
  828 + printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
  829 + tw_dev->host->host_no, TW_DRIVER, 0x6,
  830 + cmd);
  831 + retval = -EIO;
  832 + twl_reset_device_extension(tw_dev, 1);
  833 + goto out3;
  834 + }
  835 +
  836 + /* Now copy in the command packet response */
  837 + memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full));
  838 +
  839 + /* Now complete the io */
  840 + spin_lock_irqsave(tw_dev->host->host_lock, flags);
  841 + tw_dev->posted_request_count--;
  842 + tw_dev->state[request_id] = TW_S_COMPLETED;
  843 + twl_free_request_id(tw_dev, request_id);
  844 + spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
  845 + break;
  846 + default:
  847 + retval = -ENOTTY;
  848 + goto out3;
  849 + }
  850 +
  851 + /* Now copy the entire response to userspace */
  852 + if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0)
  853 + retval = 0;
  854 +out3:
  855 + /* Now free ioctl buf memory */
  856 + dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle);
  857 +out2:
  858 + mutex_unlock(&tw_dev->ioctl_lock);
  859 +out:
  860 + return retval;
  861 +} /* End twl_chrdev_ioctl() */
  862 +
  863 +/* This function handles open for the character device */
  864 +static int twl_chrdev_open(struct inode *inode, struct file *file)
  865 +{
  866 + unsigned int minor_number;
  867 + int retval = -ENODEV;
  868 +
  869 + if (!capable(CAP_SYS_ADMIN)) {
  870 + retval = -EACCES;
  871 + goto out;
  872 + }
  873 +
  874 + cycle_kernel_lock();
  875 + minor_number = iminor(inode);
  876 + if (minor_number >= twl_device_extension_count)
  877 + goto out;
  878 + retval = 0;
  879 +out:
  880 + return retval;
  881 +} /* End twl_chrdev_open() */
  882 +
  883 +/* File operations struct for character device */
  884 +static const struct file_operations twl_fops = {
  885 + .owner = THIS_MODULE,
  886 + .ioctl = twl_chrdev_ioctl,
  887 + .open = twl_chrdev_open,
  888 + .release = NULL
  889 +};
  890 +
  891 +/* This function passes sense data from firmware to scsi layer */
  892 +static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host)
  893 +{
  894 + TW_Command_Apache_Header *header;
  895 + TW_Command_Full *full_command_packet;
  896 + unsigned short error;
  897 + char *error_str;
  898 + int retval = 1;
  899 +
  900 + header = tw_dev->sense_buffer_virt[i];
  901 + full_command_packet = tw_dev->command_packet_virt[request_id];
  902 +
  903 + /* Get embedded firmware error string */
  904 + error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]);
  905 +
  906 + /* Don't print error for Logical unit not supported during rollcall */
  907 + error = le16_to_cpu(header->status_block.error);
  908 + if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) {
  909 + if (print_host)
  910 + printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
  911 + tw_dev->host->host_no,
  912 + TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
  913 + header->status_block.error,
  914 + error_str,
  915 + header->err_specific_desc);
  916 + else
  917 + printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
  918 + TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
  919 + header->status_block.error,
  920 + error_str,
  921 + header->err_specific_desc);
  922 + }
  923 +
  924 + if (copy_sense) {
  925 + memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH);
  926 + tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1);
  927 + goto out;
  928 + }
  929 +out:
  930 + return retval;
  931 +} /* End twl_fill_sense() */
  932 +
  933 +/* This function will free up device extension resources */
  934 +static void twl_free_device_extension(TW_Device_Extension *tw_dev)
  935 +{
  936 + if (tw_dev->command_packet_virt[0])
  937 + pci_free_consistent(tw_dev->tw_pci_dev,
  938 + sizeof(TW_Command_Full)*TW_Q_LENGTH,
  939 + tw_dev->command_packet_virt[0],
  940 + tw_dev->command_packet_phys[0]);
  941 +
  942 + if (tw_dev->generic_buffer_virt[0])
  943 + pci_free_consistent(tw_dev->tw_pci_dev,
  944 + TW_SECTOR_SIZE*TW_Q_LENGTH,
  945 + tw_dev->generic_buffer_virt[0],
  946 + tw_dev->generic_buffer_phys[0]);
  947 +
  948 + if (tw_dev->sense_buffer_virt[0])
  949 + pci_free_consistent(tw_dev->tw_pci_dev,
  950 + sizeof(TW_Command_Apache_Header)*
  951 + TW_Q_LENGTH,
  952 + tw_dev->sense_buffer_virt[0],
  953 + tw_dev->sense_buffer_phys[0]);
  954 +
  955 + kfree(tw_dev->event_queue[0]);
  956 +} /* End twl_free_device_extension() */
  957 +
  958 +/* This function will get parameter table entries from the firmware */
  959 +static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
  960 +{
  961 + TW_Command_Full *full_command_packet;
  962 + TW_Command *command_packet;
  963 + TW_Param_Apache *param;
  964 + void *retval = NULL;
  965 +
  966 + /* Setup the command packet */
  967 + full_command_packet = tw_dev->command_packet_virt[request_id];
  968 + memset(full_command_packet, 0, sizeof(TW_Command_Full));
  969 + command_packet = &full_command_packet->command.oldcommand;
  970 +
  971 + command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
  972 + command_packet->size = TW_COMMAND_SIZE;
  973 + command_packet->request_id = request_id;
  974 + command_packet->byte6_offset.block_count = cpu_to_le16(1);
  975 +
  976 + /* Now setup the param */
  977 + param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
  978 + memset(param, 0, TW_SECTOR_SIZE);
  979 + param->table_id = cpu_to_le16(table_id | 0x8000);
  980 + param->parameter_id = cpu_to_le16(parameter_id);
  981 + param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
  982 +
  983 + command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
  984 + command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE);
  985 +
  986 + /* Post the command packet to the board */
  987 + twl_post_command_packet(tw_dev, request_id);
  988 +
  989 + /* Poll for completion */
  990 + if (twl_poll_response(tw_dev, request_id, 30))
  991 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param")
  992 + else
  993 + retval = (void *)&(param->data[0]);
  994 +
  995 + tw_dev->posted_request_count--;
  996 + tw_dev->state[request_id] = TW_S_INITIAL;
  997 +
  998 + return retval;
  999 +} /* End twl_get_param() */
  1000 +
  1001 +/* This function will send an initconnection command to controller */
  1002 +static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits,
  1003 + u32 set_features, unsigned short current_fw_srl,
  1004 + unsigned short current_fw_arch_id,
  1005 + unsigned short current_fw_branch,
  1006 + unsigned short current_fw_build,
  1007 + unsigned short *fw_on_ctlr_srl,
  1008 + unsigned short *fw_on_ctlr_arch_id,
  1009 + unsigned short *fw_on_ctlr_branch,
  1010 + unsigned short *fw_on_ctlr_build,
  1011 + u32 *init_connect_result)
  1012 +{
  1013 + TW_Command_Full *full_command_packet;
  1014 + TW_Initconnect *tw_initconnect;
  1015 + int request_id = 0, retval = 1;
  1016 +
  1017 + /* Initialize InitConnection command packet */
  1018 + full_command_packet = tw_dev->command_packet_virt[request_id];
  1019 + memset(full_command_packet, 0, sizeof(TW_Command_Full));
  1020 + full_command_packet->header.header_desc.size_header = 128;
  1021 +
  1022 + tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand;
  1023 + tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION);
  1024 + tw_initconnect->request_id = request_id;
  1025 + tw_initconnect->message_credits = cpu_to_le16(message_credits);
  1026 + tw_initconnect->features = set_features;
  1027 +
  1028 + /* Turn on 64-bit sgl support if we need to */
  1029 + tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0;
  1030 +
  1031 + tw_initconnect->features = cpu_to_le32(tw_initconnect->features);
  1032 +
  1033 + if (set_features & TW_EXTENDED_INIT_CONNECT) {
  1034 + tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED;
  1035 + tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl);
  1036 + tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id);
  1037 + tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch);
  1038 + tw_initconnect->fw_build = cpu_to_le16(current_fw_build);
  1039 + } else
  1040 + tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE;
  1041 +
  1042 + /* Send command packet to the board */
  1043 + twl_post_command_packet(tw_dev, request_id);
  1044 +
  1045 + /* Poll for completion */
  1046 + if (twl_poll_response(tw_dev, request_id, 30)) {
  1047 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection");
  1048 + } else {
  1049 + if (set_features & TW_EXTENDED_INIT_CONNECT) {
  1050 + *fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl);
  1051 + *fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id);
  1052 + *fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch);
  1053 + *fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build);
  1054 + *init_connect_result = le32_to_cpu(tw_initconnect->result);
  1055 + }
  1056 + retval = 0;
  1057 + }
  1058 +
  1059 + tw_dev->posted_request_count--;
  1060 + tw_dev->state[request_id] = TW_S_INITIAL;
  1061 +
  1062 + return retval;
  1063 +} /* End twl_initconnection() */
  1064 +
  1065 +/* This function will initialize the fields of a device extension */
  1066 +static int twl_initialize_device_extension(TW_Device_Extension *tw_dev)
  1067 +{
  1068 + int i, retval = 1;
  1069 +
  1070 + /* Initialize command packet buffers */
  1071 + if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) {
  1072 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed");
  1073 + goto out;
  1074 + }
  1075 +
  1076 + /* Initialize generic buffer */
  1077 + if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) {
  1078 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed");
  1079 + goto out;
  1080 + }
  1081 +
  1082 + /* Allocate sense buffers */
  1083 + if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) {
  1084 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed");
  1085 + goto out;
  1086 + }
  1087 +
  1088 + /* Allocate event info space */
  1089 + tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL);
  1090 + if (!tw_dev->event_queue[0]) {
  1091 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed");
  1092 + goto out;
  1093 + }
  1094 +
  1095 + for (i = 0; i < TW_Q_LENGTH; i++) {
  1096 + tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event)));
  1097 + tw_dev->free_queue[i] = i;
  1098 + tw_dev->state[i] = TW_S_INITIAL;
  1099 + }
  1100 +
  1101 + tw_dev->free_head = TW_Q_START;
  1102 + tw_dev->free_tail = TW_Q_START;
  1103 + tw_dev->error_sequence_id = 1;
  1104 + tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
  1105 +
  1106 + mutex_init(&tw_dev->ioctl_lock);
  1107 + init_waitqueue_head(&tw_dev->ioctl_wqueue);
  1108 +
  1109 + retval = 0;
  1110 +out:
  1111 + return retval;
  1112 +} /* End twl_initialize_device_extension() */
  1113 +
  1114 +/* This function will perform a pci-dma unmap */
  1115 +static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
  1116 +{
  1117 + struct scsi_cmnd *cmd = tw_dev->srb[request_id];
  1118 +
  1119 + if (cmd->SCp.phase == TW_PHASE_SGLIST)
  1120 + scsi_dma_unmap(cmd);
  1121 +} /* End twl_unmap_scsi_data() */
  1122 +
  1123 +/* This function will handle attention interrupts */
  1124 +static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev)
  1125 +{
  1126 + int retval = 1;
  1127 + u32 request_id, doorbell;
  1128 +
  1129 + /* Read doorbell status */
  1130 + doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev));
  1131 +
  1132 + /* Check for controller errors */
  1133 + if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) {
  1134 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing");
  1135 + goto out;
  1136 + }
  1137 +
  1138 + /* Check if we need to perform an AEN drain */
  1139 + if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) {
  1140 + if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) {
  1141 + twl_get_request_id(tw_dev, &request_id);
  1142 + if (twl_aen_read_queue(tw_dev, request_id)) {
  1143 + tw_dev->state[request_id] = TW_S_COMPLETED;
  1144 + twl_free_request_id(tw_dev, request_id);
  1145 + clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
  1146 + }
  1147 + }
  1148 + }
  1149 +
  1150 + retval = 0;
  1151 +out:
  1152 + /* Clear doorbell interrupt */
  1153 + TWL_CLEAR_DB_INTERRUPT(tw_dev);
  1154 +
  1155 + /* Make sure the clear was flushed by reading it back */
  1156 + readl(TWL_HOBDBC_REG_ADDR(tw_dev));
  1157 +
  1158 + return retval;
  1159 +} /* End twl_handle_attention_interrupt() */
  1160 +
  1161 +/* Interrupt service routine */
  1162 +static irqreturn_t twl_interrupt(int irq, void *dev_instance)
  1163 +{
  1164 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
  1165 + int i, handled = 0, error = 0;
  1166 + dma_addr_t mfa = 0;
  1167 + u32 reg, regl, regh, response, request_id = 0;
  1168 + struct scsi_cmnd *cmd;
  1169 + TW_Command_Full *full_command_packet;
  1170 +
  1171 + spin_lock(tw_dev->host->host_lock);
  1172 +
  1173 + /* Read host interrupt status */
  1174 + reg = readl(TWL_HISTAT_REG_ADDR(tw_dev));
  1175 +
  1176 + /* Check if this is our interrupt, otherwise bail */
  1177 + if (!(reg & TWL_HISTATUS_VALID_INTERRUPT))
  1178 + goto twl_interrupt_bail;
  1179 +
  1180 + handled = 1;
  1181 +
  1182 + /* If we are resetting, bail */
  1183 + if (test_bit(TW_IN_RESET, &tw_dev->flags))
  1184 + goto twl_interrupt_bail;
  1185 +
  1186 + /* Attention interrupt */
  1187 + if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) {
  1188 + if (twl_handle_attention_interrupt(tw_dev)) {
  1189 + TWL_MASK_INTERRUPTS(tw_dev);
  1190 + goto twl_interrupt_bail;
  1191 + }
  1192 + }
  1193 +
  1194 + /* Response interrupt */
  1195 + while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) {
  1196 + if (sizeof(dma_addr_t) > 4) {
  1197 + regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev));
  1198 + regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
  1199 + mfa = ((u64)regh << 32) | regl;
  1200 + } else
  1201 + mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
  1202 +
  1203 + error = 0;
  1204 + response = (u32)mfa;
  1205 +
  1206 + /* Check for command packet error */
  1207 + if (!TW_NOTMFA_OUT(response)) {
  1208 + for (i=0;i<TW_Q_LENGTH;i++) {
  1209 + if (tw_dev->sense_buffer_phys[i] == mfa) {
  1210 + request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id);
  1211 + if (tw_dev->srb[request_id] != NULL)
  1212 + error = twl_fill_sense(tw_dev, i, request_id, 1, 1);
  1213 + else {
  1214 + /* Skip ioctl error prints */
  1215 + if (request_id != tw_dev->chrdev_request_id)
  1216 + error = twl_fill_sense(tw_dev, i, request_id, 0, 1);
  1217 + else
  1218 + memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header));
  1219 + }
  1220 +
  1221 + /* Now re-post the sense buffer */
  1222 + writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev));
  1223 + writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev));
  1224 + break;
  1225 + }
  1226 + }
  1227 + } else
  1228 + request_id = TW_RESID_OUT(response);
  1229 +
  1230 + full_command_packet = tw_dev->command_packet_virt[request_id];
  1231 +
  1232 + /* Check for correct state */
  1233 + if (tw_dev->state[request_id] != TW_S_POSTED) {
  1234 + if (tw_dev->srb[request_id] != NULL) {
  1235 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted");
  1236 + TWL_MASK_INTERRUPTS(tw_dev);
  1237 + goto twl_interrupt_bail;
  1238 + }
  1239 + }
  1240 +
  1241 + /* Check for internal command completion */
  1242 + if (tw_dev->srb[request_id] == NULL) {
  1243 + if (request_id != tw_dev->chrdev_request_id) {
  1244 + if (twl_aen_complete(tw_dev, request_id))
  1245 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt");
  1246 + } else {
  1247 + tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
  1248 + wake_up(&tw_dev->ioctl_wqueue);
  1249 + }
  1250 + } else {
  1251 + cmd = tw_dev->srb[request_id];
  1252 +
  1253 + if (!error)
  1254 + cmd->result = (DID_OK << 16);
  1255 +
  1256 + /* Report residual bytes for single sgl */
  1257 + if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) {
  1258 + if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id]))
  1259 + scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length);
  1260 + }
  1261 +
  1262 + /* Now complete the io */
  1263 + tw_dev->state[request_id] = TW_S_COMPLETED;
  1264 + twl_free_request_id(tw_dev, request_id);
  1265 + tw_dev->posted_request_count--;
  1266 + tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
  1267 + twl_unmap_scsi_data(tw_dev, request_id);
  1268 + }
  1269 +
  1270 + /* Check for another response interrupt */
  1271 + reg = readl(TWL_HISTAT_REG_ADDR(tw_dev));
  1272 + }
  1273 +
  1274 +twl_interrupt_bail:
  1275 + spin_unlock(tw_dev->host->host_lock);
  1276 + return IRQ_RETVAL(handled);
  1277 +} /* End twl_interrupt() */
  1278 +
  1279 +/* This function will poll for a register change */
  1280 +static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds)
  1281 +{
  1282 + unsigned long before;
  1283 + int retval = 1;
  1284 + u32 reg_value;
  1285 +
  1286 + reg_value = readl(reg);
  1287 + before = jiffies;
  1288 +
  1289 + while ((reg_value & value) != result) {
  1290 + reg_value = readl(reg);
  1291 + if (time_after(jiffies, before + HZ * seconds))
  1292 + goto out;
  1293 + msleep(50);
  1294 + }
  1295 + retval = 0;
  1296 +out:
  1297 + return retval;
  1298 +} /* End twl_poll_register() */
  1299 +
  1300 +/* This function will reset a controller */
  1301 +static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset)
  1302 +{
  1303 + int retval = 1;
  1304 + int i = 0;
  1305 + u32 status = 0;
  1306 + unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0;
  1307 + unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0;
  1308 + u32 init_connect_result = 0;
  1309 + int tries = 0;
  1310 + int do_soft_reset = soft_reset;
  1311 +
  1312 + while (tries < TW_MAX_RESET_TRIES) {
  1313 + /* Do a soft reset if one is needed */
  1314 + if (do_soft_reset) {
  1315 + TWL_SOFT_RESET(tw_dev);
  1316 +
  1317 + /* Make sure controller is in a good state */
  1318 + if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) {
  1319 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence");
  1320 + tries++;
  1321 + continue;
  1322 + }
  1323 + if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) {
  1324 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence");
  1325 + tries++;
  1326 + continue;
  1327 + }
  1328 + }
  1329 +
  1330 + /* Initconnect */
  1331 + if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS,
  1332 + TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL,
  1333 + TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH,
  1334 + TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl,
  1335 + &fw_on_ctlr_arch_id, &fw_on_ctlr_branch,
  1336 + &fw_on_ctlr_build, &init_connect_result)) {
  1337 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL");
  1338 + do_soft_reset = 1;
  1339 + tries++;
  1340 + continue;
  1341 + }
  1342 +
  1343 + /* Load sense buffers */
  1344 + while (i < TW_Q_LENGTH) {
  1345 + writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev));
  1346 + writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev));
  1347 +
  1348 + /* Check status for over-run after each write */
  1349 + status = readl(TWL_STATUS_REG_ADDR(tw_dev));
  1350 + if (!(status & TWL_STATUS_OVERRUN_SUBMIT))
  1351 + i++;
  1352 + }
  1353 +
  1354 + /* Now check status */
  1355 + status = readl(TWL_STATUS_REG_ADDR(tw_dev));
  1356 + if (status) {
  1357 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers");
  1358 + do_soft_reset = 1;
  1359 + tries++;
  1360 + continue;
  1361 + }
  1362 +
  1363 + /* Drain the AEN queue */
  1364 + if (twl_aen_drain_queue(tw_dev, soft_reset)) {
  1365 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence");
  1366 + do_soft_reset = 1;
  1367 + tries++;
  1368 + continue;
  1369 + }
  1370 +
  1371 + /* Load rest of compatibility struct */
  1372 + strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
  1373 + tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
  1374 + tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
  1375 + tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
  1376 + tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
  1377 + tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
  1378 + tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
  1379 + tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
  1380 + tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
  1381 + tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
  1382 +
  1383 + /* If we got here, controller is in a good state */
  1384 + retval = 0;
  1385 + goto out;
  1386 + }
  1387 +out:
  1388 + return retval;
  1389 +} /* End twl_reset_sequence() */
  1390 +
  1391 +/* This function will reset a device extension */
  1392 +static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset)
  1393 +{
  1394 + int i = 0, retval = 1;
  1395 + unsigned long flags = 0;
  1396 +
  1397 + /* Block SCSI requests while we are resetting */
  1398 + if (ioctl_reset)
  1399 + scsi_block_requests(tw_dev->host);
  1400 +
  1401 + set_bit(TW_IN_RESET, &tw_dev->flags);
  1402 + TWL_MASK_INTERRUPTS(tw_dev);
  1403 + TWL_CLEAR_DB_INTERRUPT(tw_dev);
  1404 +
  1405 + spin_lock_irqsave(tw_dev->host->host_lock, flags);
  1406 +
  1407 + /* Abort all requests that are in progress */
  1408 + for (i = 0; i < TW_Q_LENGTH; i++) {
  1409 + if ((tw_dev->state[i] != TW_S_FINISHED) &&
  1410 + (tw_dev->state[i] != TW_S_INITIAL) &&
  1411 + (tw_dev->state[i] != TW_S_COMPLETED)) {
  1412 + if (tw_dev->srb[i]) {
  1413 + tw_dev->srb[i]->result = (DID_RESET << 16);
  1414 + tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
  1415 + twl_unmap_scsi_data(tw_dev, i);
  1416 + }
  1417 + }
  1418 + }
  1419 +
  1420 + /* Reset queues and counts */
  1421 + for (i = 0; i < TW_Q_LENGTH; i++) {
  1422 + tw_dev->free_queue[i] = i;
  1423 + tw_dev->state[i] = TW_S_INITIAL;
  1424 + }
  1425 + tw_dev->free_head = TW_Q_START;
  1426 + tw_dev->free_tail = TW_Q_START;
  1427 + tw_dev->posted_request_count = 0;
  1428 +
  1429 + spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
  1430 +
  1431 + if (twl_reset_sequence(tw_dev, 1))
  1432 + goto out;
  1433 +
  1434 + TWL_UNMASK_INTERRUPTS(tw_dev);
  1435 +
  1436 + clear_bit(TW_IN_RESET, &tw_dev->flags);
  1437 + tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
  1438 +
  1439 + retval = 0;
  1440 +out:
  1441 + if (ioctl_reset)
  1442 + scsi_unblock_requests(tw_dev->host);
  1443 + return retval;
  1444 +} /* End twl_reset_device_extension() */
  1445 +
  1446 +/* This funciton returns unit geometry in cylinders/heads/sectors */
  1447 +static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[])
  1448 +{
  1449 + int heads, sectors;
  1450 + TW_Device_Extension *tw_dev;
  1451 +
  1452 + tw_dev = (TW_Device_Extension *)sdev->host->hostdata;
  1453 +
  1454 + if (capacity >= 0x200000) {
  1455 + heads = 255;
  1456 + sectors = 63;
  1457 + } else {
  1458 + heads = 64;
  1459 + sectors = 32;
  1460 + }
  1461 +
  1462 + geom[0] = heads;
  1463 + geom[1] = sectors;
  1464 + geom[2] = sector_div(capacity, heads * sectors); /* cylinders */
  1465 +
  1466 + return 0;
  1467 +} /* End twl_scsi_biosparam() */
  1468 +
  1469 +/* This is the new scsi eh reset function */
  1470 +static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt)
  1471 +{
  1472 + TW_Device_Extension *tw_dev = NULL;
  1473 + int retval = FAILED;
  1474 +
  1475 + tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
  1476 +
  1477 + tw_dev->num_resets++;
  1478 +
  1479 + sdev_printk(KERN_WARNING, SCpnt->device,
  1480 + "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
  1481 + TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
  1482 +
  1483 + /* Make sure we are not issuing an ioctl or resetting from ioctl */
  1484 + mutex_lock(&tw_dev->ioctl_lock);
  1485 +
  1486 + /* Now reset the card and some of the device extension data */
  1487 + if (twl_reset_device_extension(tw_dev, 0)) {
  1488 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset");
  1489 + goto out;
  1490 + }
  1491 +
  1492 + retval = SUCCESS;
  1493 +out:
  1494 + mutex_unlock(&tw_dev->ioctl_lock);
  1495 + return retval;
  1496 +} /* End twl_scsi_eh_reset() */
  1497 +
  1498 +/* This is the main scsi queue function to handle scsi opcodes */
  1499 +static int twl_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
  1500 +{
  1501 + int request_id, retval;
  1502 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
  1503 +
  1504 + /* If we are resetting due to timed out ioctl, report as busy */
  1505 + if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
  1506 + retval = SCSI_MLQUEUE_HOST_BUSY;
  1507 + goto out;
  1508 + }
  1509 +
  1510 + /* Save done function into scsi_cmnd struct */
  1511 + SCpnt->scsi_done = done;
  1512 +
  1513 + /* Get a free request id */
  1514 + twl_get_request_id(tw_dev, &request_id);
  1515 +
  1516 + /* Save the scsi command for use by the ISR */
  1517 + tw_dev->srb[request_id] = SCpnt;
  1518 +
  1519 + /* Initialize phase to zero */
  1520 + SCpnt->SCp.phase = TW_PHASE_INITIAL;
  1521 +
  1522 + retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
  1523 + if (retval) {
  1524 + tw_dev->state[request_id] = TW_S_COMPLETED;
  1525 + twl_free_request_id(tw_dev, request_id);
  1526 + SCpnt->result = (DID_ERROR << 16);
  1527 + done(SCpnt);
  1528 + retval = 0;
  1529 + }
  1530 +out:
  1531 + return retval;
  1532 +} /* End twl_scsi_queue() */
  1533 +
  1534 +/* This function tells the controller to shut down */
  1535 +static void __twl_shutdown(TW_Device_Extension *tw_dev)
  1536 +{
  1537 + /* Disable interrupts */
  1538 + TWL_MASK_INTERRUPTS(tw_dev);
  1539 +
  1540 + /* Free up the IRQ */
  1541 + free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
  1542 +
  1543 + printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no);
  1544 +
  1545 + /* Tell the card we are shutting down */
  1546 + if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
  1547 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed");
  1548 + } else {
  1549 + printk(KERN_WARNING "3w-sas: Shutdown complete.\n");
  1550 + }
  1551 +
  1552 + /* Clear doorbell interrupt just before exit */
  1553 + TWL_CLEAR_DB_INTERRUPT(tw_dev);
  1554 +} /* End __twl_shutdown() */
  1555 +
  1556 +/* Wrapper for __twl_shutdown */
  1557 +static void twl_shutdown(struct pci_dev *pdev)
  1558 +{
  1559 + struct Scsi_Host *host = pci_get_drvdata(pdev);
  1560 + TW_Device_Extension *tw_dev;
  1561 +
  1562 + if (!host)
  1563 + return;
  1564 +
  1565 + tw_dev = (TW_Device_Extension *)host->hostdata;
  1566 +
  1567 + if (tw_dev->online)
  1568 + __twl_shutdown(tw_dev);
  1569 +} /* End twl_shutdown() */
  1570 +
  1571 +/* This function configures unit settings when a unit is coming on-line */
  1572 +static int twl_slave_configure(struct scsi_device *sdev)
  1573 +{
  1574 + /* Force 60 second timeout */
  1575 + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
  1576 +
  1577 + return 0;
  1578 +} /* End twl_slave_configure() */
  1579 +
  1580 +/* scsi_host_template initializer */
  1581 +static struct scsi_host_template driver_template = {
  1582 + .module = THIS_MODULE,
  1583 + .name = "3w-sas",
  1584 + .queuecommand = twl_scsi_queue,
  1585 + .eh_host_reset_handler = twl_scsi_eh_reset,
  1586 + .bios_param = twl_scsi_biosparam,
  1587 + .change_queue_depth = twl_change_queue_depth,
  1588 + .can_queue = TW_Q_LENGTH-2,
  1589 + .slave_configure = twl_slave_configure,
  1590 + .this_id = -1,
  1591 + .sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH,
  1592 + .max_sectors = TW_MAX_SECTORS,
  1593 + .cmd_per_lun = TW_MAX_CMDS_PER_LUN,
  1594 + .use_clustering = ENABLE_CLUSTERING,
  1595 + .shost_attrs = twl_host_attrs,
  1596 + .emulated = 1
  1597 +};
  1598 +
  1599 +/* This function will probe and initialize a card */
  1600 +static int __devinit twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
  1601 +{
  1602 + struct Scsi_Host *host = NULL;
  1603 + TW_Device_Extension *tw_dev;
  1604 + int retval = -ENODEV;
  1605 + int *ptr_phycount, phycount=0;
  1606 +
  1607 + retval = pci_enable_device(pdev);
  1608 + if (retval) {
  1609 + TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device");
  1610 + goto out_disable_device;
  1611 + }
  1612 +
  1613 + pci_set_master(pdev);
  1614 + pci_try_set_mwi(pdev);
  1615 +
  1616 + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
  1617 + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
  1618 + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
  1619 + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
  1620 + TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
  1621 + retval = -ENODEV;
  1622 + goto out_disable_device;
  1623 + }
  1624 +
  1625 + host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
  1626 + if (!host) {
  1627 + TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension");
  1628 + retval = -ENOMEM;
  1629 + goto out_disable_device;
  1630 + }
  1631 + tw_dev = shost_priv(host);
  1632 +
  1633 + /* Save values to device extension */
  1634 + tw_dev->host = host;
  1635 + tw_dev->tw_pci_dev = pdev;
  1636 +
  1637 + if (twl_initialize_device_extension(tw_dev)) {
  1638 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
  1639 + goto out_free_device_extension;
  1640 + }
  1641 +
  1642 + /* Request IO regions */
  1643 + retval = pci_request_regions(pdev, "3w-sas");
  1644 + if (retval) {
  1645 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region");
  1646 + goto out_free_device_extension;
  1647 + }
  1648 +
  1649 + /* Save base address, use region 1 */
  1650 + tw_dev->base_addr = pci_iomap(pdev, 1, 0);
  1651 + if (!tw_dev->base_addr) {
  1652 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
  1653 + goto out_release_mem_region;
  1654 + }
  1655 +
  1656 + /* Disable interrupts on the card */
  1657 + TWL_MASK_INTERRUPTS(tw_dev);
  1658 +
  1659 + /* Initialize the card */
  1660 + if (twl_reset_sequence(tw_dev, 0)) {
  1661 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
  1662 + goto out_iounmap;
  1663 + }
  1664 +
  1665 + /* Set host specific parameters */
  1666 + host->max_id = TW_MAX_UNITS;
  1667 + host->max_cmd_len = TW_MAX_CDB_LEN;
  1668 + host->max_lun = TW_MAX_LUNS;
  1669 + host->max_channel = 0;
  1670 +
  1671 + /* Register the card with the kernel SCSI layer */
  1672 + retval = scsi_add_host(host, &pdev->dev);
  1673 + if (retval) {
  1674 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed");
  1675 + goto out_iounmap;
  1676 + }
  1677 +
  1678 + pci_set_drvdata(pdev, host);
  1679 +
  1680 + printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
  1681 + host->host_no,
  1682 + (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
  1683 + TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH),
  1684 + (u64)pci_resource_start(pdev, 1), pdev->irq);
  1685 +
  1686 + ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE,
  1687 + TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH);
  1688 + if (ptr_phycount)
  1689 + phycount = le32_to_cpu(*(int *)ptr_phycount);
  1690 +
  1691 + printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
  1692 + host->host_no,
  1693 + (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
  1694 + TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH),
  1695 + (char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE,
  1696 + TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH),
  1697 + phycount);
  1698 +
  1699 + /* Try to enable MSI */
  1700 + if (use_msi && !pci_enable_msi(pdev))
  1701 + set_bit(TW_USING_MSI, &tw_dev->flags);
  1702 +
  1703 + /* Now setup the interrupt handler */
  1704 + retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev);
  1705 + if (retval) {
  1706 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ");
  1707 + goto out_remove_host;
  1708 + }
  1709 +
  1710 + twl_device_extension_list[twl_device_extension_count] = tw_dev;
  1711 + twl_device_extension_count++;
  1712 +
  1713 + /* Re-enable interrupts on the card */
  1714 + TWL_UNMASK_INTERRUPTS(tw_dev);
  1715 +
  1716 + /* Finally, scan the host */
  1717 + scsi_scan_host(host);
  1718 +
  1719 + /* Add sysfs binary files */
  1720 + if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr))
  1721 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read");
  1722 + if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr))
  1723 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info");
  1724 +
  1725 + if (twl_major == -1) {
  1726 + if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0)
  1727 + TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device");
  1728 + }
  1729 + tw_dev->online = 1;
  1730 + return 0;
  1731 +
  1732 +out_remove_host:
  1733 + if (test_bit(TW_USING_MSI, &tw_dev->flags))
  1734 + pci_disable_msi(pdev);
  1735 + scsi_remove_host(host);
  1736 +out_iounmap:
  1737 + iounmap(tw_dev->base_addr);
  1738 +out_release_mem_region:
  1739 + pci_release_regions(pdev);
  1740 +out_free_device_extension:
  1741 + twl_free_device_extension(tw_dev);
  1742 + scsi_host_put(host);
  1743 +out_disable_device:
  1744 + pci_disable_device(pdev);
  1745 +
  1746 + return retval;
  1747 +} /* End twl_probe() */
  1748 +
  1749 +/* This function is called to remove a device */
  1750 +static void twl_remove(struct pci_dev *pdev)
  1751 +{
  1752 + struct Scsi_Host *host = pci_get_drvdata(pdev);
  1753 + TW_Device_Extension *tw_dev;
  1754 +
  1755 + if (!host)
  1756 + return;
  1757 +
  1758 + tw_dev = (TW_Device_Extension *)host->hostdata;
  1759 +
  1760 + if (!tw_dev->online)
  1761 + return;
  1762 +
  1763 + /* Remove sysfs binary files */
  1764 + sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr);
  1765 + sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr);
  1766 +
  1767 + scsi_remove_host(tw_dev->host);
  1768 +
  1769 + /* Unregister character device */
  1770 + if (twl_major >= 0) {
  1771 + unregister_chrdev(twl_major, "twl");
  1772 + twl_major = -1;
  1773 + }
  1774 +
  1775 + /* Shutdown the card */
  1776 + __twl_shutdown(tw_dev);
  1777 +
  1778 + /* Disable MSI if enabled */
  1779 + if (test_bit(TW_USING_MSI, &tw_dev->flags))
  1780 + pci_disable_msi(pdev);
  1781 +
  1782 + /* Free IO remapping */
  1783 + iounmap(tw_dev->base_addr);
  1784 +
  1785 + /* Free up the mem region */
  1786 + pci_release_regions(pdev);
  1787 +
  1788 + /* Free up device extension resources */
  1789 + twl_free_device_extension(tw_dev);
  1790 +
  1791 + scsi_host_put(tw_dev->host);
  1792 + pci_disable_device(pdev);
  1793 + twl_device_extension_count--;
  1794 +} /* End twl_remove() */
  1795 +
  1796 +#ifdef CONFIG_PM
  1797 +/* This function is called on PCI suspend */
  1798 +static int twl_suspend(struct pci_dev *pdev, pm_message_t state)
  1799 +{
  1800 + struct Scsi_Host *host = pci_get_drvdata(pdev);
  1801 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
  1802 +
  1803 + printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no);
  1804 + /* Disable interrupts */
  1805 + TWL_MASK_INTERRUPTS(tw_dev);
  1806 +
  1807 + free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
  1808 +
  1809 + /* Tell the card we are shutting down */
  1810 + if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
  1811 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend");
  1812 + } else {
  1813 + printk(KERN_WARNING "3w-sas: Suspend complete.\n");
  1814 + }
  1815 +
  1816 + /* Clear doorbell interrupt */
  1817 + TWL_CLEAR_DB_INTERRUPT(tw_dev);
  1818 +
  1819 + pci_save_state(pdev);
  1820 + pci_disable_device(pdev);
  1821 + pci_set_power_state(pdev, pci_choose_state(pdev, state));
  1822 +
  1823 + return 0;
  1824 +} /* End twl_suspend() */
  1825 +
  1826 +/* This function is called on PCI resume */
  1827 +static int twl_resume(struct pci_dev *pdev)
  1828 +{
  1829 + int retval = 0;
  1830 + struct Scsi_Host *host = pci_get_drvdata(pdev);
  1831 + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
  1832 +
  1833 + printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
  1834 + pci_set_power_state(pdev, PCI_D0);
  1835 + pci_enable_wake(pdev, PCI_D0, 0);
  1836 + pci_restore_state(pdev);
  1837 +
  1838 + retval = pci_enable_device(pdev);
  1839 + if (retval) {
  1840 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume");
  1841 + return retval;
  1842 + }
  1843 +
  1844 + pci_set_master(pdev);
  1845 + pci_try_set_mwi(pdev);
  1846 +
  1847 + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
  1848 + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
  1849 + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
  1850 + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
  1851 + TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
  1852 + retval = -ENODEV;
  1853 + goto out_disable_device;
  1854 + }
  1855 +
  1856 + /* Initialize the card */
  1857 + if (twl_reset_sequence(tw_dev, 0)) {
  1858 + retval = -ENODEV;
  1859 + goto out_disable_device;
  1860 + }
  1861 +
  1862 + /* Now setup the interrupt handler */
  1863 + retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev);
  1864 + if (retval) {
  1865 + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume");
  1866 + retval = -ENODEV;
  1867 + goto out_disable_device;
  1868 + }
  1869 +
  1870 + /* Now enable MSI if enabled */
  1871 + if (test_bit(TW_USING_MSI, &tw_dev->flags))
  1872 + pci_enable_msi(pdev);
  1873 +
  1874 + /* Re-enable interrupts on the card */
  1875 + TWL_UNMASK_INTERRUPTS(tw_dev);
  1876 +
  1877 + printk(KERN_WARNING "3w-sas: Resume complete.\n");
  1878 + return 0;
  1879 +
  1880 +out_disable_device:
  1881 + scsi_remove_host(host);
  1882 + pci_disable_device(pdev);
  1883 +
  1884 + return retval;
  1885 +} /* End twl_resume() */
  1886 +#endif
  1887 +
  1888 +/* PCI Devices supported by this driver */
  1889 +static struct pci_device_id twl_pci_tbl[] __devinitdata = {
  1890 + { PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) },
  1891 + { }
  1892 +};
  1893 +MODULE_DEVICE_TABLE(pci, twl_pci_tbl);
  1894 +
  1895 +/* pci_driver initializer */
  1896 +static struct pci_driver twl_driver = {
  1897 + .name = "3w-sas",
  1898 + .id_table = twl_pci_tbl,
  1899 + .probe = twl_probe,
  1900 + .remove = twl_remove,
  1901 +#ifdef CONFIG_PM
  1902 + .suspend = twl_suspend,
  1903 + .resume = twl_resume,
  1904 +#endif
  1905 + .shutdown = twl_shutdown
  1906 +};
  1907 +
  1908 +/* This function is called on driver initialization */
  1909 +static int __init twl_init(void)
  1910 +{
  1911 + printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
  1912 +
  1913 + return pci_register_driver(&twl_driver);
  1914 +} /* End twl_init() */
  1915 +
  1916 +/* This function is called on driver exit */
  1917 +static void __exit twl_exit(void)
  1918 +{
  1919 + pci_unregister_driver(&twl_driver);
  1920 +} /* End twl_exit() */
  1921 +
  1922 +module_init(twl_init);
  1923 +module_exit(twl_exit);
drivers/scsi/3w-sas.h
  1 +/*
  2 + 3w-sas.h -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux.
  3 +
  4 + Written By: Adam Radford <linuxraid@lsi.com>
  5 +
  6 + Copyright (C) 2009 LSI Corporation.
  7 +
  8 + This program is free software; you can redistribute it and/or modify
  9 + it under the terms of the GNU General Public License as published by
  10 + the Free Software Foundation; version 2 of the License.
  11 +
  12 + This program is distributed in the hope that it will be useful,
  13 + but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15 + GNU General Public License for more details.
  16 +
  17 + NO WARRANTY
  18 + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  19 + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  20 + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  21 + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  22 + solely responsible for determining the appropriateness of using and
  23 + distributing the Program and assumes all risks associated with its
  24 + exercise of rights under this Agreement, including but not limited to
  25 + the risks and costs of program errors, damage to or loss of data,
  26 + programs or equipment, and unavailability or interruption of operations.
  27 +
  28 + DISCLAIMER OF LIABILITY
  29 + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  30 + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  31 + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  32 + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  33 + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  34 + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  35 + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  36 +
  37 + You should have received a copy of the GNU General Public License
  38 + along with this program; if not, write to the Free Software
  39 + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  40 +
  41 + Bugs/Comments/Suggestions should be mailed to:
  42 + linuxraid@lsi.com
  43 +
  44 + For more information, goto:
  45 + http://www.lsi.com
  46 +*/
  47 +
  48 +#ifndef _3W_SAS_H
  49 +#define _3W_SAS_H
  50 +
  51 +/* AEN severity table */
  52 +static char *twl_aen_severity_table[] =
  53 +{
  54 + "None", "ERROR", "WARNING", "INFO", "DEBUG", NULL
  55 +};
  56 +
  57 +/* Liberator register offsets */
  58 +#define TWL_STATUS 0x0 /* Status */
  59 +#define TWL_HIBDB 0x20 /* Inbound doorbell */
  60 +#define TWL_HISTAT 0x30 /* Host interrupt status */
  61 +#define TWL_HIMASK 0x34 /* Host interrupt mask */
  62 +#define TWL_HOBDB 0x9C /* Outbound doorbell */
  63 +#define TWL_HOBDBC 0xA0 /* Outbound doorbell clear */
  64 +#define TWL_SCRPD3 0xBC /* Scratchpad */
  65 +#define TWL_HIBQPL 0xC0 /* Host inbound Q low */
  66 +#define TWL_HIBQPH 0xC4 /* Host inbound Q high */
  67 +#define TWL_HOBQPL 0xC8 /* Host outbound Q low */
  68 +#define TWL_HOBQPH 0xCC /* Host outbound Q high */
  69 +#define TWL_HISTATUS_VALID_INTERRUPT 0xC
  70 +#define TWL_HISTATUS_ATTENTION_INTERRUPT 0x4
  71 +#define TWL_HISTATUS_RESPONSE_INTERRUPT 0x8
  72 +#define TWL_STATUS_OVERRUN_SUBMIT 0x2000
  73 +#define TWL_ISSUE_SOFT_RESET 0x100
  74 +#define TWL_CONTROLLER_READY 0x2000
  75 +#define TWL_DOORBELL_CONTROLLER_ERROR 0x200000
  76 +#define TWL_DOORBELL_ATTENTION_INTERRUPT 0x40000
  77 +#define TWL_PULL_MODE 0x1
  78 +
  79 +/* Command packet opcodes used by the driver */
  80 +#define TW_OP_INIT_CONNECTION 0x1
  81 +#define TW_OP_GET_PARAM 0x12
  82 +#define TW_OP_SET_PARAM 0x13
  83 +#define TW_OP_EXECUTE_SCSI 0x10
  84 +
  85 +/* Asynchronous Event Notification (AEN) codes used by the driver */
  86 +#define TW_AEN_QUEUE_EMPTY 0x0000
  87 +#define TW_AEN_SOFT_RESET 0x0001
  88 +#define TW_AEN_SYNC_TIME_WITH_HOST 0x031
  89 +#define TW_AEN_SEVERITY_ERROR 0x1
  90 +#define TW_AEN_SEVERITY_DEBUG 0x4
  91 +#define TW_AEN_NOT_RETRIEVED 0x1
  92 +
  93 +/* Command state defines */
  94 +#define TW_S_INITIAL 0x1 /* Initial state */
  95 +#define TW_S_STARTED 0x2 /* Id in use */
  96 +#define TW_S_POSTED 0x4 /* Posted to the controller */
  97 +#define TW_S_COMPLETED 0x8 /* Completed by isr */
  98 +#define TW_S_FINISHED 0x10 /* I/O completely done */
  99 +
  100 +/* Compatibility defines */
  101 +#define TW_9750_ARCH_ID 10
  102 +#define TW_CURRENT_DRIVER_SRL 40
  103 +#define TW_CURRENT_DRIVER_BUILD 0
  104 +#define TW_CURRENT_DRIVER_BRANCH 0
  105 +
  106 +/* Phase defines */
  107 +#define TW_PHASE_INITIAL 0
  108 +#define TW_PHASE_SGLIST 2
  109 +
  110 +/* Misc defines */
  111 +#define TW_SECTOR_SIZE 512
  112 +#define TW_MAX_UNITS 32
  113 +#define TW_INIT_MESSAGE_CREDITS 0x100
  114 +#define TW_INIT_COMMAND_PACKET_SIZE 0x3
  115 +#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED 0x6
  116 +#define TW_EXTENDED_INIT_CONNECT 0x2
  117 +#define TW_BASE_FW_SRL 24
  118 +#define TW_BASE_FW_BRANCH 0
  119 +#define TW_BASE_FW_BUILD 1
  120 +#define TW_Q_LENGTH 256
  121 +#define TW_Q_START 0
  122 +#define TW_MAX_SLOT 32
  123 +#define TW_MAX_RESET_TRIES 2
  124 +#define TW_MAX_CMDS_PER_LUN 254
  125 +#define TW_MAX_AEN_DRAIN 255
  126 +#define TW_IN_RESET 2
  127 +#define TW_USING_MSI 3
  128 +#define TW_IN_ATTENTION_LOOP 4
  129 +#define TW_MAX_SECTORS 256
  130 +#define TW_MAX_CDB_LEN 16
  131 +#define TW_IOCTL_CHRDEV_TIMEOUT 60 /* 60 seconds */
  132 +#define TW_IOCTL_CHRDEV_FREE -1
  133 +#define TW_COMMAND_OFFSET 128 /* 128 bytes */
  134 +#define TW_VERSION_TABLE 0x0402
  135 +#define TW_TIMEKEEP_TABLE 0x040A
  136 +#define TW_INFORMATION_TABLE 0x0403
  137 +#define TW_PARAM_FWVER 3
  138 +#define TW_PARAM_FWVER_LENGTH 16
  139 +#define TW_PARAM_BIOSVER 4
  140 +#define TW_PARAM_BIOSVER_LENGTH 16
  141 +#define TW_PARAM_MODEL 8
  142 +#define TW_PARAM_MODEL_LENGTH 16
  143 +#define TW_PARAM_PHY_SUMMARY_TABLE 1
  144 +#define TW_PARAM_PHYCOUNT 2
  145 +#define TW_PARAM_PHYCOUNT_LENGTH 1
  146 +#define TW_IOCTL_FIRMWARE_PASS_THROUGH 0x108 // Used by smartmontools
  147 +#define TW_ALLOCATION_LENGTH 128
  148 +#define TW_SENSE_DATA_LENGTH 18
  149 +#define TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED 0x10a
  150 +#define TW_ERROR_INVALID_FIELD_IN_CDB 0x10d
  151 +#define TW_ERROR_UNIT_OFFLINE 0x128
  152 +#define TW_MESSAGE_SOURCE_CONTROLLER_ERROR 3
  153 +#define TW_MESSAGE_SOURCE_CONTROLLER_EVENT 4
  154 +#define TW_DRIVER 6
  155 +#ifndef PCI_DEVICE_ID_3WARE_9750
  156 +#define PCI_DEVICE_ID_3WARE_9750 0x1010
  157 +#endif
  158 +
  159 +/* Bitmask macros to eliminate bitfields */
  160 +
  161 +/* opcode: 5, reserved: 3 */
  162 +#define TW_OPRES_IN(x,y) ((x << 5) | (y & 0x1f))
  163 +#define TW_OP_OUT(x) (x & 0x1f)
  164 +
  165 +/* opcode: 5, sgloffset: 3 */
  166 +#define TW_OPSGL_IN(x,y) ((x << 5) | (y & 0x1f))
  167 +#define TW_SGL_OUT(x) ((x >> 5) & 0x7)
  168 +
  169 +/* severity: 3, reserved: 5 */
  170 +#define TW_SEV_OUT(x) (x & 0x7)
  171 +
  172 +/* not_mfa: 1, reserved: 7, status: 8, request_id: 16 */
  173 +#define TW_RESID_OUT(x) ((x >> 16) & 0xffff)
  174 +#define TW_NOTMFA_OUT(x) (x & 0x1)
  175 +
  176 +/* request_id: 12, lun: 4 */
  177 +#define TW_REQ_LUN_IN(lun, request_id) (((lun << 12) & 0xf000) | (request_id & 0xfff))
  178 +#define TW_LUN_OUT(lun) ((lun >> 12) & 0xf)
  179 +
  180 +/* Register access macros */
  181 +#define TWL_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_STATUS)
  182 +#define TWL_HOBQPL_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBQPL)
  183 +#define TWL_HOBQPH_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBQPH)
  184 +#define TWL_HOBDB_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBDB)
  185 +#define TWL_HOBDBC_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBDBC)
  186 +#define TWL_HIMASK_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIMASK)
  187 +#define TWL_HISTAT_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HISTAT)
  188 +#define TWL_HIBQPH_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIBQPH)
  189 +#define TWL_HIBQPL_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIBQPL)
  190 +#define TWL_HIBDB_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIBDB)
  191 +#define TWL_SCRPD3_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_SCRPD3)
  192 +#define TWL_MASK_INTERRUPTS(x) (writel(~0, TWL_HIMASK_REG_ADDR(tw_dev)))
  193 +#define TWL_UNMASK_INTERRUPTS(x) (writel(~TWL_HISTATUS_VALID_INTERRUPT, TWL_HIMASK_REG_ADDR(tw_dev)))
  194 +#define TWL_CLEAR_DB_INTERRUPT(x) (writel(~0, TWL_HOBDBC_REG_ADDR(tw_dev)))
  195 +#define TWL_SOFT_RESET(x) (writel(TWL_ISSUE_SOFT_RESET, TWL_HIBDB_REG_ADDR(tw_dev)))
  196 +
  197 +/* Macros */
  198 +#define TW_PRINTK(h,a,b,c) { \
  199 +if (h) \
  200 +printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \
  201 +else \
  202 +printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
  203 +}
  204 +#define TW_MAX_LUNS 16
  205 +#define TW_COMMAND_SIZE (sizeof(dma_addr_t) > 4 ? 6 : 4)
  206 +#define TW_LIBERATOR_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 46 : 92)
  207 +#define TW_LIBERATOR_MAX_SGL_LENGTH_OLD (sizeof(dma_addr_t) > 4 ? 47 : 94)
  208 +#define TW_PADDING_LENGTH_LIBERATOR 136
  209 +#define TW_PADDING_LENGTH_LIBERATOR_OLD 132
  210 +#define TW_CPU_TO_SGL(x) (sizeof(dma_addr_t) > 4 ? cpu_to_le64(x) : cpu_to_le32(x))
  211 +
  212 +#pragma pack(1)
  213 +
  214 +/* SGL entry */
  215 +typedef struct TAG_TW_SG_Entry_ISO {
  216 + dma_addr_t address;
  217 + dma_addr_t length;
  218 +} TW_SG_Entry_ISO;
  219 +
  220 +/* Old Command Packet with ISO SGL */
  221 +typedef struct TW_Command {
  222 + unsigned char opcode__sgloffset;
  223 + unsigned char size;
  224 + unsigned char request_id;
  225 + unsigned char unit__hostid;
  226 + /* Second DWORD */
  227 + unsigned char status;
  228 + unsigned char flags;
  229 + union {
  230 + unsigned short block_count;
  231 + unsigned short parameter_count;
  232 + } byte6_offset;
  233 + union {
  234 + struct {
  235 + u32 lba;
  236 + TW_SG_Entry_ISO sgl[TW_LIBERATOR_MAX_SGL_LENGTH_OLD];
  237 + unsigned char padding[TW_PADDING_LENGTH_LIBERATOR_OLD];
  238 + } io;
  239 + struct {
  240 + TW_SG_Entry_ISO sgl[TW_LIBERATOR_MAX_SGL_LENGTH_OLD];
  241 + u32 padding;
  242 + unsigned char padding2[TW_PADDING_LENGTH_LIBERATOR_OLD];
  243 + } param;
  244 + } byte8_offset;
  245 +} TW_Command;
  246 +
  247 +/* New Command Packet with ISO SGL */
  248 +typedef struct TAG_TW_Command_Apache {
  249 + unsigned char opcode__reserved;
  250 + unsigned char unit;
  251 + unsigned short request_id__lunl;
  252 + unsigned char status;
  253 + unsigned char sgl_offset;
  254 + unsigned short sgl_entries__lunh;
  255 + unsigned char cdb[16];
  256 + TW_SG_Entry_ISO sg_list[TW_LIBERATOR_MAX_SGL_LENGTH];
  257 + unsigned char padding[TW_PADDING_LENGTH_LIBERATOR];
  258 +} TW_Command_Apache;
  259 +
  260 +/* New command packet header */
  261 +typedef struct TAG_TW_Command_Apache_Header {
  262 + unsigned char sense_data[TW_SENSE_DATA_LENGTH];
  263 + struct {
  264 + char reserved[4];
  265 + unsigned short error;
  266 + unsigned char padding;
  267 + unsigned char severity__reserved;
  268 + } status_block;
  269 + unsigned char err_specific_desc[98];
  270 + struct {
  271 + unsigned char size_header;
  272 + unsigned short request_id;
  273 + unsigned char size_sense;
  274 + } header_desc;
  275 +} TW_Command_Apache_Header;
  276 +
  277 +/* This struct is a union of the 2 command packets */
  278 +typedef struct TAG_TW_Command_Full {
  279 + TW_Command_Apache_Header header;
  280 + union {
  281 + TW_Command oldcommand;
  282 + TW_Command_Apache newcommand;
  283 + } command;
  284 +} TW_Command_Full;
  285 +
  286 +/* Initconnection structure */
  287 +typedef struct TAG_TW_Initconnect {
  288 + unsigned char opcode__reserved;
  289 + unsigned char size;
  290 + unsigned char request_id;
  291 + unsigned char res2;
  292 + unsigned char status;
  293 + unsigned char flags;
  294 + unsigned short message_credits;
  295 + u32 features;
  296 + unsigned short fw_srl;
  297 + unsigned short fw_arch_id;
  298 + unsigned short fw_branch;
  299 + unsigned short fw_build;
  300 + u32 result;
  301 +} TW_Initconnect;
  302 +
  303 +/* Event info structure */
  304 +typedef struct TAG_TW_Event
  305 +{
  306 + unsigned int sequence_id;
  307 + unsigned int time_stamp_sec;
  308 + unsigned short aen_code;
  309 + unsigned char severity;
  310 + unsigned char retrieved;
  311 + unsigned char repeat_count;
  312 + unsigned char parameter_len;
  313 + unsigned char parameter_data[98];
  314 +} TW_Event;
  315 +
  316 +typedef struct TAG_TW_Ioctl_Driver_Command {
  317 + unsigned int control_code;
  318 + unsigned int status;
  319 + unsigned int unique_id;
  320 + unsigned int sequence_id;
  321 + unsigned int os_specific;
  322 + unsigned int buffer_length;
  323 +} TW_Ioctl_Driver_Command;
  324 +
  325 +typedef struct TAG_TW_Ioctl_Apache {
  326 + TW_Ioctl_Driver_Command driver_command;
  327 + char padding[488];
  328 + TW_Command_Full firmware_command;
  329 + char data_buffer[1];
  330 +} TW_Ioctl_Buf_Apache;
  331 +
  332 +/* GetParam descriptor */
  333 +typedef struct {
  334 + unsigned short table_id;
  335 + unsigned short parameter_id;
  336 + unsigned short parameter_size_bytes;
  337 + unsigned short actual_parameter_size_bytes;
  338 + unsigned char data[1];
  339 +} TW_Param_Apache;
  340 +
  341 +/* Compatibility information structure */
  342 +typedef struct TAG_TW_Compatibility_Info
  343 +{
  344 + char driver_version[32];
  345 + unsigned short working_srl;
  346 + unsigned short working_branch;
  347 + unsigned short working_build;
  348 + unsigned short driver_srl_high;
  349 + unsigned short driver_branch_high;
  350 + unsigned short driver_build_high;
  351 + unsigned short driver_srl_low;
  352 + unsigned short driver_branch_low;
  353 + unsigned short driver_build_low;
  354 + unsigned short fw_on_ctlr_srl;
  355 + unsigned short fw_on_ctlr_branch;
  356 + unsigned short fw_on_ctlr_build;
  357 +} TW_Compatibility_Info;
  358 +
  359 +#pragma pack()
  360 +
  361 +typedef struct TAG_TW_Device_Extension {
  362 + void __iomem *base_addr;
  363 + unsigned long *generic_buffer_virt[TW_Q_LENGTH];
  364 + dma_addr_t generic_buffer_phys[TW_Q_LENGTH];
  365 + TW_Command_Full *command_packet_virt[TW_Q_LENGTH];
  366 + dma_addr_t command_packet_phys[TW_Q_LENGTH];
  367 + TW_Command_Apache_Header *sense_buffer_virt[TW_Q_LENGTH];
  368 + dma_addr_t sense_buffer_phys[TW_Q_LENGTH];
  369 + struct pci_dev *tw_pci_dev;
  370 + struct scsi_cmnd *srb[TW_Q_LENGTH];
  371 + unsigned char free_queue[TW_Q_LENGTH];
  372 + unsigned char free_head;
  373 + unsigned char free_tail;
  374 + int state[TW_Q_LENGTH];
  375 + unsigned int posted_request_count;
  376 + unsigned int max_posted_request_count;
  377 + unsigned int max_sgl_entries;
  378 + unsigned int sgl_entries;
  379 + unsigned int num_resets;
  380 + unsigned int sector_count;
  381 + unsigned int max_sector_count;
  382 + unsigned int aen_count;
  383 + struct Scsi_Host *host;
  384 + long flags;
  385 + TW_Event *event_queue[TW_Q_LENGTH];
  386 + unsigned char error_index;
  387 + unsigned int error_sequence_id;
  388 + int chrdev_request_id;
  389 + wait_queue_head_t ioctl_wqueue;
  390 + struct mutex ioctl_lock;
  391 + TW_Compatibility_Info tw_compat_info;
  392 + char online;
  393 +} TW_Device_Extension;
  394 +
  395 +#endif /* _3W_SAS_H */
drivers/scsi/Kconfig
... ... @@ -399,6 +399,17 @@
399 399 Please read the comments at the top of
400 400 <file:drivers/scsi/3w-9xxx.c>.
401 401  
  402 +config SCSI_3W_SAS
  403 + tristate "3ware 97xx SAS/SATA-RAID support"
  404 + depends on PCI && SCSI
  405 + help
  406 + This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
  407 +
  408 + <http://www.lsi.com>
  409 +
  410 + Please read the comments at the top of
  411 + <file:drivers/scsi/3w-sas.c>.
  412 +
402 413 config SCSI_7000FASST
403 414 tristate "7000FASST SCSI support"
404 415 depends on ISA && SCSI && ISA_DMA_API
drivers/scsi/Makefile
... ... @@ -114,6 +114,7 @@
114 114 obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
115 115 obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
116 116 obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
  117 +obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
117 118 obj-$(CONFIG_SCSI_PPA) += ppa.o
118 119 obj-$(CONFIG_SCSI_IMM) += imm.o
119 120 obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o