18 Mar, 2021
3 commits
-
The IPIs will be handled in a new way which introduced by
commit "ANDROID: trusty-irq: specify IPIs in new way". This
commit will sync the dts change after switching to the new
approach.Signed-off-by: Ji Luo
Change-Id: I178682465f30b835269c8cb1ee34637df2a6bbd3 -
Revert this commit because it will break GKI compatibility, the
trusty IPIs will be handled in a new way.Change-Id: I348d4a10e038f9b7eb8606ed1b1dde04b40ab01f
-
This reverts commit d7f4afdd682ab498258a6c832f482d736e0d4224.
Change-Id: I1c0d7ef7a1cd874eae79709710ab0b5fd53fb866
05 Mar, 2021
2 commits
-
After reduce the panel RM67191's pixel clock from 132MHz to
121MHz by 'commit 4193a9c3254b ("MLK-3056-2 drm/panel: rm67191:
change clock rate to 121MHz for default mod")', the disp_apb
clock rate needs to be configured properly to avoid the issue
described in LF-33886 ticket with currrent disp_apb clock config
like below:sys1_pll_out 5 5 0 800000000 0 0 50000
sys1_pll_800m 5 5 0 800000000 0 0 50000
disp_apb 1 1 0 133333334 0 0 50000
disp_apb_root_clk 2 2 0 133333334 0 0 50000And configure disp_apb rate to 25MHz like below can solve this
issue:sys1_pll_out 5 5 0 800000000 0 0 50000
sys1_pll_800m 5 5 0 800000000 0 0 50000
disp_apb 1 1 0 25000000 0 0 50000
disp_apb_root_clk 2 2 0 25000000 0 0 50000Signed-off-by: Fancy Fang
Reviewed-by: Robby Cai -
Change-Id: I9dd6b8dd4ff1d25608a9264ecc1facb2df649818
04 Mar, 2021
1 commit
-
On 8DXL, the LCDIF IRQ number is different from 8QXP, so fix it in the
specific 8dxl dts file.Signed-off-by: Robert Chiras
Reviewed-by: Laurentiu Palcu
Acked-by: Jason Liu
23 Feb, 2021
2 commits
-
Allow i.mx8m power domain driver to be loaded as module.
Do not select IMX8M_PM_DOMAINS by default after enable ARCH_MXC.Signed-off-by: Jindong Yue
Change-Id: I19c9978762136d1a6314ffcb3545536ae2598faa -
When M4 boots from flexspi, linux should not use that, otherwise
M4 will hang.Reviewed-by: Richard Zhu
Signed-off-by: Peng Fan
(cherry picked from commit 1f49d90ebaf77492bcb2e9f8a8e5a8d4d7aee58a)
Acked-by: Jason Liu
19 Feb, 2021
2 commits
-
The patch fixed NetdNamespaceTest#CheckNoUserNamespaceSupport
case fail in netd_integration_test.The case test kernel configuration option CONFIG_USER_NS=n
Change-Id: I63f3d82fcaf57ee562e4b4cb0f4f004860b9c407
Signed-off-by: yang.tian -
Add CONFIG_CRYPTO_MD5 kerenl defconfig.
TEST: VTS module vts_kernel_net_tests pass.
Change-Id: Ib487c221dddac48b6b43fb04be89c0849ebd5058
Signed-off-by: yang.tian
05 Feb, 2021
1 commit
-
CONFIG_DEBUG_FS is not allowed in user build mode
from below file: kernel/configs/android-5.10/non_debuggable.configSigned-off-by: Jindong Yue
Change-Id: I6fd9e74808d4a96e33d5cca748b0f6dd2bab88e8
03 Feb, 2021
1 commit
-
Add the missing pmu node and also fix the issue with kvm that it
requires pmu node to be present.Signed-off-by: Li Yang
Acked-by: Diana Craciun
01 Feb, 2021
2 commits
-
add vpu_v4l2 device node for 8mm/8mq/8mp
Signed-off-by: Zhou Peng
Change-Id: If41af5aafa79764a3d208d6888f4b2a0eca7361b -
Change-Id: Ief0d6fac10385c5f7d99ab7a9ac3932a7a637913
30 Jan, 2021
1 commit
-
Clocks are always on when DSP PD is on. Use dummy clocks
for minimal code impact for now.This is similar with the approach on i.MX8QM.
Signed-off-by: Daniel Baluta
29 Jan, 2021
8 commits
-
Enable LPA in powersave mode.
This is achieved by adding imx8mp-evk-powersave-rpmsg.dtsChange-Id: I70213808f7a509e25c778c2b831f7fb95941b667
Signed-off-by: zhipeng.wang -
remove HDMI module on imx8mp.
it will save 10mw for vdd_socChange-Id: I3b6222d0dac4f77f52fb45213c5dc28498f6616f
-
Disable ldb, it will save 20mw on imx8mp board.
the power domain mediamix will on after lcd off, because ldb@32ec005c
is not support runtime pm. Linux bsp will send one formal patch to enable
lvds run time pm, before that I disable ldb.cat sys/kernel/debug/pm_genpd/pm_genpd_summary
mediamix on ispdwp, mipi_phy1,mipi_phy2
/devices/...../32c00000.bus/32c00000.bus:phy@32ec0128 suspended
/devices/...../32c00000.bus/32c00000.bus:ldb@32ec005c unsupported
/devices/...../32c00000.bus/32e80000.lcd-controller suspendedpower domain mediamix will been off after apply this patch when lcd off
cat sys/kernel/debug/pm_genpd/pm_genpd_summary
mediamix off-0 ispdwp, mipi_phy1,mipi_phy2
/devices/.../32c00000.bus/32c00000.bus:phy@32ec0128 suspended
/devices/.../32c00000.bus/32c00000.bus:ldb@32ec005c suspended
/devices/.../32c00000.bus/32e80000.lcd-controller suspended
/devices/.../32c00000.bus/32e90000.lcd-controller suspendedChange-Id: I9b2c3a7f544707e3380ece64d30b987d42ec94c1
Signed-off-by: zhipeng.wang -
Under normal circumstances, use BT,
the system will request high. In order to test the
MP3 to BT in the case of low audio bus, remove it.Change-Id: I00fd9986e559ce39a8d0af18540ee55e60357a98
Signed-off-by: zhipeng.wang -
disable fec on imx8mp board.
Change-Id: I70ebc6d47895059b4abef8fb04c1a56e3cfd6dd7
Signed-off-by: zhipeng.wang -
disable system regulator to high bus freq for emmc.
system will change to high bus freq when open lcd
through imx_lcdifv3_runtime_resume.Change-Id: Iaa65e56c5efdd7cb236a21f41d70834070065293
Signed-off-by: zhang sanshan -
enable runtime setting gic clk(500M → 100M)
Change-Id: I79e07ffcf645ee7f26ec1fc701d44f3e7502cb62
Signed-off-by: zhipeng.wang -
Under normal circumstances, the ddr frequencies of audio_bus_mode and
low_bus_mode are both 100mts. Now in order to meet Sony’s requirements,
both audio_bus_mode and low_bus_mode are changed to 400mts.Change-Id: I68f878a52069136f4b8ff84b06a55b8ea1eae99d
28 Jan, 2021
3 commits
-
add isi and ov5640 dts setting into imx8qm-mek-hdmi.dts.
imx8qm-mek-hdmi.dts is included by md dts.
camera is also is needed by hdmi dts.Change-Id: I51d31bc21a1d1b8af90a0cf0c5b51137773d3c12
Signed-off-by: zhang sanshan -
Build nxp mxmwifi driver out of kernel tree on L5.10
Revert "MA-18230-2 Enable nxp wifi 88w8997 with mxmdriver"
This reverts commit eb2ca694eb279fa32acf8368120b34b385ba469b.Change-Id: I73da9fc2396a4a16cf7a91de9b2ac2c9f641fe0d
Signed-off-by: yang.tian -
Since we only support Jailhouse on ARM64, so drop this to avoid
build warning on ARM32Reviewed-by: Dong Aisheng
Signed-off-by: Peng Fan
27 Jan, 2021
1 commit
-
DMA_VIRTUAL_CHANNELS depends on DMADEVICES and DMA_VIRTUAL_CHANNELS
is selected by GKI_HIDDEN_SND_SOC_CONFIGS.To fix unmet dependency in x86_64, select DMADEVICES under
GKI_HIDDEN_SND_SOC_CONFIGS.Also, drop CONFIG_DMADEVICES=y in arch/arm64/configs/gki_defconfig.
WARNING: unmet direct dependencies detected for DMA_VIRTUAL_CHANNELS
Depends on [n]: DMADEVICES [=n]
Selected by [y]:
- GKI_HIDDEN_SND_SOC_CONFIGS [=y]Bug: 174628645
Signed-off-by: Miles Chen
Change-Id: I1de491c10542f1b7c9c8754c65415b028d3bc922
26 Jan, 2021
1 commit
-
Fix i2c address for second and third ak4458 dac on Audio
Board 2.0Signed-off-by: Hongting Dong
Reviewed-by: Adrian Alonso
25 Jan, 2021
4 commits
-
This reverts commit d367e7d3351edc526133e4bd258dac2dd0b4ef4f.
As designed, the default dtb imx8mq-evk can only support one
display: DCSS + native HDMI, and dtb imx8mq-evk-dual-display
is dedicated for multiple dislay.And current multiple displays is implemented by two different
DRM devices with two DRI cards generated. But Weston UI cannot
make sure to choose DCSS for UI display device, so revert this
patch to solve this kind of problem.Signed-off-by: Fancy Fang
-
Change-Id: I56f21ca5d08858f763395359baedb6f1a3b9066c
-
Change-Id: I173bc0325c93daaf82bb894f77ba35fa827864de
-
Add phy tuning result for USB certification, mainly for pass
eye pattern test, details please check its dt binding doc:
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txtReviewed-by: Haibo Chen
Reviewed-by: Peter Chen
Signed-off-by: Li Jun
22 Jan, 2021
1 commit
-
With mailbox driver support i.MX8 SCU MU channel, we could
use it to avoid trigger interrupts for each TR/RR registers
in one MU, instead, only one RX interrupt for a recv and
one TX interrupt for a send.Signed-off-by: Nitin Garg
Reviewed-by: Dong Aisheng
21 Jan, 2021
1 commit
-
Add HDMI RX kernel defconfig for android.
Change-Id: Ie7ff7ede71d5d8b489ee33fec8202f0d0c6500ef
Signed-off-by: yang.tian
20 Jan, 2021
6 commits
-
This is the 5.10.9 stable release
* tag 'v5.10.9': (153 commits)
Linux 5.10.9
netfilter: nf_nat: Fix memleak in nf_nat_init
netfilter: conntrack: fix reading nf_conntrack_buckets
...Signed-off-by: Jason Liu
-
This is the 5.10.8 stable release
* tag 'v5.10.8': (104 commits)
Linux 5.10.8
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
drm/panfrost: Remove unused variables in panfrost_job_close()
...Signed-off-by: Jason Liu
-
This is the 5.10.7 stable release
* tag 'v5.10.7': (144 commits)
Linux 5.10.7
scsi: target: Fix XCOPY NAA identifier lookup
rtlwifi: rise completion at the last step of firmware callback
...Signed-off-by: Jason Liu
-
This is the 5.10.5 stable release
* tag 'v5.10.5': (63 commits)
Linux 5.10.5
device-dax: Fix range release
ext4: avoid s_mb_prefetch to be zero in individual scenarios
...Signed-off-by: Jason Liu
-
Change-Id: I5a8e84f5b691a352ad4ab138927f4ff98e07ab18
-
add the gpio-scu node and enable on-board phy for
enet0 by default.remove "enable-active-high" property from mii_select node to
use the enet module.Signed-off-by: Shenwei Wang