16 Dec, 2006
20 commits
-
This removes the extra definition of the .error_handler member
in the pata_rz1000 driver.Signed-off-by: Ira W. Snyder
Cc: Jeff Garzik
Cc: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
The return value of platform_device_register_simple() should be checked
by IS_ERR().Cc: Jeff Garzik
Acked-by: Alan Cox
Signed-off-by: Akinobu Mita
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
Do not mangle with HOST_CAP while resetting controller. The code is
there for a historical reason. The mangling breaks controller feature
detection and 0 PORTS_IMPL workaround code.This problem was spotted by Manoj Kasichainula.
Signed-off-by: Tejun Heo
Cc: Manoj Kasichainula
Signed-off-by: Jeff Garzik -
Calling sg_init_one() with NULL buf causes oops on certain
configurations. Don't initialize sg in ata_exec_internal() if
DMA_NONE and make the function complain if @buf is NULL when dma_dir
isn't DMA_NONE. While at it, fix comment.The problem is discovered and initial patch was submitted by Arnd
Bergmann.Signed-off-by: Tejun Heo
Cc: Arnd Bergmann
Signed-off-by: Jeff Garzik -
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA)
have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO,
and ATA DMA continue to work just fine.Acked-by: Anantha Subramanyam
Signed-off-by: Jeff Garzik -
We are inside spin_lock_irqsave(). quoth akpm's debug facility:
[ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 232.232000] ata1.00: configured for UDMA/33
[ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic()
[ 232.404000] [] kmap_atomic+0xa9/0x1ab
[ 232.404000] [] ata_scsi_rbuf_get+0x1c/0x30
[ 232.404000] [] ata_scsi_rbuf_fill+0x1a/0x87
[ 232.404000] [] ata_scsiop_mode_sense+0x0/0x309
[ 232.404000] [] end_bio_bh_io_sync+0x0/0x37
[ 232.404000] [] scsi_done+0x0/0x16
[ 232.404000] [] scsi_done+0x0/0x16
[ 232.404000] [] ata_scsi_simulate+0xb0/0x13f
[...]Signed-off-by: Jeff Garzik
-
piix_init_one() allocates host private data which should be freed by
piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop()
while merging, leaking 4 bytes on driver detach. Fix it.This was spotted using Kmemleak by Catalin Marinas.
Signed-off-by: Tejun Heo
Cc: Catalin Marinas
Signed-off-by: Jeff Garzik -
This updated patch adds the Intel ICH9 IDE mode SATA controller DID's.
Signed-off-by: Jason Gaston
Acked-by: Tejun Heo
Cc: Jeff Garzik
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
Nobody uses it, but it was still wrong. Using the macro argument name
'work' meant that when we used 'work' as a member name, that would also
get replaced by the macro argument.Signed-off-by: Linus Torvalds
-
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] cio: css_register_subchannel race.
[S390] Save prefix register for dump on panic
[S390] Fix reboot hang
[S390] Fix reboot hang on LPARs
[S390] sclp_cpi module license.
[S390] zcrypt: module unload fixes.
[S390] Hipersocket multicast queue: make sure outbound handler is called
[S390] hypfs fixes
[S390] update default configuration -
It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed. We can put it back when
it's stable and isn't likely to make warning or bug events worse.In the meantime, enable frame pointers for more readable stack traces.
Signed-off-by: Linus Torvalds
-
Asynchronous probe can release memory of a subchannel before
css_get_ssd_info is called. To fix this call css_get_ssd_info
before registering with driver core.Signed-off-by: Stefan Bader
Signed-off-by: Martin Schwidefsky -
The dump tools expect that the saved prefix register points to the
lowcore of the dump cpu. Since we set the prefix register to 0 during
reipl/dump, we have to save the original prefix register. Before we
start the dump program, we copy the original prefix register to the
designated location in the lowcore.Signed-off-by: Michael Holzheu
Signed-off-by: Martin Schwidefsky -
We use printks after shutting down all other cpus. This is not allowed
and can lead to deadlocks. Therefore the printks have to be removed.Signed-off-by: Michael Holzheu
Signed-off-by: Martin Schwidefsky -
Reboot hangs on LPARs without diag308 support. The reason for this is,
that before the reboot is done, the channel subsystem is shut down.
During the reset on each possible subchannel a "store subchannel" is
done. This operation can end in a program check interruption, if the
specified subchannel set is not implemented by the hardware. During
the reset, currently we do not have a program check handler, which
leads to the described kernel bug. We install now a new program check
handler for the reboot code to fix this problem.Signed-off-by: Michael Holzheu
Signed-off-by: Martin Schwidefsky -
sclp_cpi is GPL. Make the module not taint the kernel
Signed-off-by: Christian Borntraeger
Signed-off-by: Martin Schwidefsky -
Add code to reset all queues for a domain and add missing tasklet_kill
call to ap bus module exit code.Signed-off-by: Ralph Wuerthner
Signed-off-by: Martin Schwidefsky -
A HiperSocket multicast queue works asynchronously. When sending
buffers, the buffer state change from PRIMED to EMPTY may happen
delayed. Reschedule the checking for changes in the outbound queue,
if there are still PRIMED buffers.Signed-off-by: Ursula Braun
Signed-off-by: Martin Schwidefsky -
Correct typo to make hypfs work on systems that support only diag204
subcode 4 and fix error handling in hypfs_diag_init.Signed-off-by: Christian Borntraeger
Signed-off-by: Martin Schwidefsky -
Signed-off-by: Martin Schwidefsky
14 Dec, 2006
20 commits
-
At least on PPC, the "op ? op : dma" construct causes a compile failure
because the dma_* is a do{}while(0) macro.This turns all of them into proper if/else to avoid this problem.
Signed-off-by: Ben Collins
Signed-off-by: Linus Torvalds -
.. and so the stabilization phase starts.
Signed-off-by: Linus Torvalds
-
Remove the deferred hooks and all related code as scheduled in
feature-removal-schedule.Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
Make fib6_node 'subtree' depend on IPV6_SUBTREES.
Signed-off-by: Kim Nordlund
Signed-off-by: David S. Miller -
Signed-off-by: Ivan Skytte Jorgensen
Signed-off-by: Sridhar Samudrala
Signed-off-by: David S. Miller -
Signed-off-by: Sridhar Samudrala
Signed-off-by: David S. Miller -
Currently in SCTP, we maintain a local address list by rebuilding the whole
list from the device list whenever we get a address add/delete event.This patch fixes it by only adding/deleting the address for which we
receive the event.Also removed the sctp_local_addr_lock() which is no longer needed as we
now use list_for_each_safe() to traverse this list. This fixes the bugs
in sctp_copy_laddrs_xxx() routines where we do copy_to_user() while
holding this lock.Signed-off-by: Sridhar Samudrala
Signed-off-by: David S. Miller -
It should call tcp_free_md5sig_pool() not __tcp_free_md5sig_pool()
so that it does proper refcounting.Signed-off-by: David S. Miller
-
> Relevant standard (RFC 3493) notes:
>
> The IPV6_UNICAST_HOPS option may be used with getsockopt() to
> determine the hop limit value that the system will use for subsequent
> unicast packets sent via that socket.
>
> I don't reckon -1 could be the hop limit value.-1 means un-initialized.
> IMHO, the value from
> case 1 (if socket is connected to some destination), otherwise case 2
> (if bound to a scope interface) or ultimately the default hop limit
> ought to be returned instead, as it will be most often correct, while
> the current behavior is always wrong, unless setsockopt() has been used
> first. I don't if some people may think doing a route lookup in
> getsockopt might be overly expensive, but at least the two other cases
> should be ok, particularly the last one.The following patch seems to work for me, but this code has behaved this
way for a while, so don't know if it will break any existing apps.Signed-off-by: Brian Haley
Signed-off-by: David S. Miller -
In a recent patch we introduced invalid return codes which will result in the
opposite of what is intended (i.e. send more packets in face of peculiar
network conditions).This fixes it by returning ~0 which means not calculated as per
dccp_li_hist_calc_i_mean.Signed-off-by: Ian McDonald
Signed-off-by: Arnaldo Carvalho de Melo -
If we come to node we'd already marked as seen and it's not a part of path
(i.e. we don't have a loop right there), we already know that it isn't a
part of any loop, so we don't need to revisit it.That speeds the things up if some chain is refered to from several places
and kills O(exp(table size)) worst-case behaviour (without sleeping,
at that, so if you manage to self-LART that way, you are SOL for a long
time)...Signed-off-by: Al Viro
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
Matches and targets verification is duplicated in normal and compat processing
ways. This patch refactors code in order to remove this.Signed-off-by: Dmitry Mishin
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
CLUSTERIP, CONNMARK, CONNSECMARK, and connbytes need ip_conntrack or
layer 3 protocol module of nf_conntrack.Signed-off-by: Yasuyuki Kozakai
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
To do that, this makes nf_ct_l3proto_try_module_{get,put} compatible
functions. As a result we can remove '#ifdef' surrounds and direct call of
need_conntrack().Signed-off-by: Yasuyuki Kozakai
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
NF_NAT depends on NF_CONNTRACK_IPV4, not NF_CONNTRACK.
Signed-off-by: Yasuyuki Kozakai
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
Building with INET=n results in
WARNING: "ip_route_output_key" [net/netfilter/nf_conntrack_h323.ko] undefined!
The entire code in net/netfilter is only used for IPv4/IPv6 currently, so
let it depend on INET.Noticed by Toralf Förster .
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller -
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4017/1: [Jornada7xx] - Updating Jornada720.c
[ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support
[ARM] Provide a method to alter the control register
[ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks"
[ARM] Remove empty fixup function
[ARM] 4014/1: include drivers/hid/Kconfig
[ARM] 4013/1: clocksource driver for netx
[ARM] 4012/1: Clocksource for pxa
[ARM] Clean up ioremap code
[ARM] Unuse another Linux PTE bit
[ARM] Clean up KERNEL_RAM_ADDR
[ARM] Add sys_*at syscalls
[ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs
[ARM] Formalise the ARMv6 processor name string
[ARM] Handle HWCAP_VFP in VFP support code
[ARM] 4011/1: AT91SAM9260: Fix compilation with NAND driver
[ARM] 4010/1: AT91SAM9260-EK board: Prepare for MACB Ethernet support -
* 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Move sg_dma_{len,address} from pci.h to scatterlist.h -
Deprecate the old "legacy" PM API, and more importantly default it to "n".
Virtually nothing in-tree uses it any more.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
platform_device_add_data() makes a copy of the data that is given to it,
and thus the parameter can be const. This removes a warning when data
from get_property() on powerpc is handed to platform_device_add_data(),
as get_property() returns a const pointer.Signed-off-by: Scott Wood
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman
