04 Mar, 2016
1 commit
-
When playback mono wav with record in background, there will be some
nosie in the right dac channel. It seems that the ADC data has been
routed to the dac channel.The cs42888 have 8 dac channels, it's appropriate to mute the unused
dac channels, and the noise will disappear.Steps to reproduce this issue:
arecord -D hw:0,0 -f S16_LE -r 48000 -c 1 a.wav &
aplay -Dhw:0,0 audio48k16M.wavSigned-off-by: Zidan Wang
Signed-off-by: Mark Brown
(cherry picked from commit 1f1e60c9cdd573be271130e44a23efed48e0578d)
02 Mar, 2016
4 commits
-
Do sanity check before calling mmc_force_remove.
BCM WiFi driver will call wifi_card_detect(false) if probe fails
due to no card exists on board.This is needed for Android BSP since Android has builtin WiFi drver
and some boards may not have WiFi cards pluged.
Then the kernel dump likes follows may appear.
----------------------------------------------
dhd_module_init in
Power-up adapter 'DHD generic adapter'
wifi_platform_bus_enumerate device present 1
mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz
failed to power up DHD generic adapter, 3 retry left
wifi_platform_bus_enumerate device present 0
------------[ cut here ]------------
Kernel BUG at 8051247c [verbose debug info unavailable]
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in: bcmdhd(+) ov5642_camera ov5640_camera_mipi_int ov5640_camera_int mxc_v4l2_capture ipu_bg_overlay_sdc ipu_still v4l2_int_device mxc_dcic ipu_prp_enc ipu_csi_enc ipu_fg_overlay_sdc evbug
CPU: 3 PID: 1071 Comm: modprobe Not tainted 4.1.15-01591-g1393481 #1504
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: a99be880 ti: a8dd8000 task.ti: a8dd8000
PC is at mmc_sdio_remove+0x70/0x74
LR is at mmc_sdio_force_remove+0xc/0x34
pc : [] lr : [] psr: 60070013
sp : a8dd9d00 ip : 00000000 fp : 00000000
r10: 7f100c98 r9 : 00000000 r8 : 7f0fc410
r7 : a8dd9d48 r6 : a83b1800 r5 : 00000000 r4 : a83b1800
r3 : 00000000 r2 : 00000000 r1 : 809b50c8 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c53c7d Table: 38cdc04a DAC: 00000015
Process modprobe (pid: 1071, stack limit = 0xa8dd8210)
Stack: (0xa8dd9d00 to 0xa8dda000)
9d00: 00000000 a83b1800 00000000 00000000 a8dd9d48 8051248c 00000000 7f0ca6cc
9d20: a99be880 a90e6280 00000003 7f0ca920 fffffdfb a81af810 80bb570c 00000000
9d40: 00020002 00000000 a8dd9d48 a8dd9d48 00000000 7f100c98 7f100c98 a90e6280
9d60: fffffdfb 00000008 00000000 7f0fe490 56f19f1c 7f0cabe4 80bb6d74 a81af810
9d80: 7f0fe248 8037f864 8037f820 80bb6d74 a81af810 00000000 7f0fe248 8037e118
9da0: a81af810 7f0fe248 a81af844 80b1e8b0 00000000 8037e328 00000000 7f0fe248
9dc0: 8037e29c 8037c660 a8025c5c a8187a34 7f0fe248 a9547780 00000000 8037d8b4
9de0: 7f0f5028 7f0fe248 00000000 7f0fe248 00000000 a90e6280 80ba78f4 8037e92c
9e00: 00000000 7f100c98 00000000 7f0cb02c 00000000 80af7720 80af7720 a90e6280
9e20: 7f124000 00000000 00000001 80009730 00000000 8040003b abc7db80 800e1c68
9e40: 00000000 a935c340 8040003a abc83180 ab757000 80af257c 00000001 8040003a
9e60: 00000001 00000001 a8dd9e7c 80af2260 a8001f00 80af46c0 56f19f1c 800e32a0
9e80: 7f0fe448 a90e6108 a90e6240 7f0fe448 a90e6100 7f0fe490 56f19f1c 8078b2b0
9ea0: 7f0fe448 a90e6100 a8dd9f58 a90e6108 00000001 80092dd8 7f0fe454 00007fff
9ec0: 800902a8 a8928900 7f0fe490 00000000 7f0fe590 000015fa c1754bfc 7f0fe590
9ee0: c16d8000 000c823c 05de516a 00000000 0000000e 00000000 00000000 00000000
9f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9f20: 00000000 00000000 00000000 00000000 00000648 00000000 00000003 01111348
9f40: 0000017b 8000f644 a8dd8000 00000000 00000073 8009352c c16d8000 000c823c
9f60: c175456c c17543a5 c17957ec 0007ad30 0008f7c0 00000000 00000000 00000000
9f80: 0000002a 0000002b 0000001f 00000023 00000014 00000000 01111348 00000000
9fa0: 00000000 8000f4c0 01111348 00000000 00000003 01111348 00000000 00040000
9fc0: 01111348 00000000 00000000 0000017b 00000000 01111218 00000073 00000073
9fe0: 7ec5d950 7ec5d940 0001f0dc 76ecf610 600d0010 00000003 00000000 00000000
[] (mmc_sdio_remove) from [] (mmc_sdio_force_remove+0xc/0x34)
[] (mmc_sdio_force_remove) from [] (wifi_platform_bus_enumerate+0x54/0x90 [bcmdhd])
[] (wifi_platform_bus_enumerate [bcmdhd]) from [] (dhd_wifi_platform_load+0x17c/0x39c [bcmdhd])
[] (dhd_wifi_platform_load [bcmdhd]) from [] (wifi_plat_dev_drv_probe+0xa4/0x124 [bcmdhd])
[] (wifi_plat_dev_drv_probe [bcmdhd]) from [] (platform_drv_probe+0x44/0xa4)
[] (platform_drv_probe) from [] (driver_probe_device+0x174/0x2b4)
[] (driver_probe_device) from [] (__driver_attach+0x8c/0x90)
[] (__driver_attach) from [] (bus_for_each_dev+0x6c/0xa0)
[] (bus_for_each_dev) from [] (bus_add_driver+0x148/0x1f0)
[] (bus_add_driver) from [] (driver_register+0x78/0xf8)
[] (driver_register) from [] (dhd_wifi_platform_register_drv+0x1cc/0x20c [bcmdhd])
[] (dhd_wifi_platform_register_drv [bcmdhd]) from [] (do_one_initcall+0x8c/0x1d4)
[] (do_one_initcall) from [] (do_init_module+0x5c/0x1a8)
[] (do_init_module) from [] (load_module+0x177c/0x1d4c)
[] (load_module) from [] (SyS_finit_module+0x64/0x74)
[] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x3c)
Code: e3a03000 e58631f8 e5863228 e8bd80f8 (e7f001f2)
---[ end trace 6f28ec270544e09e ]---
Segmentation fault
root@imx6qdlsolo:~#Signed-off-by: Dong Aisheng
(cherry picked from commit 3c5798c62efeac08be34211eaac7c5467cf62894) -
In order to save power consumption, turn off pcie clks/regulators
if there is no pcie link at all.
Summit this patch, because of that MLK-12278
doesn't turn off the clks/regulators actually.Signed-off-by: Richard Zhu
(cherry picked from commit 841b5c2c6890deebda63ddc119d201b700302262) -
This reverts commit 829b6962f7e3cfc06f7c5c26269fd47ad48cf503.
Revert this change as it causes a sysfs path to change and therefore
introduces and ABI regression. More precisely Android's vold is not being
able to access /sys/module/mmcblk/parameters/perdev_minors any more, since
the path becomes changed to: "/sys/module/mmc_block/..."Fixes: 829b6962f7e3 ("mmc: block: don't use parameter prefix if built as
module")
Reported-by: John Stultz
Cc: Andy Shevchenko
Signed-off-by: Ulf Hansson(cherry picked from commit a5ebb87db84392edfd3142c3a6a78431d820a789)
-
There have two same extended enet dts file to enable fec2 port, so
remove the redundant enet dts file.The issue is caused by the commit 370426c2a918 that was cherry picked
after commit b74c6b9c7fdc.Signed-off-by: Fugang Duan
01 Mar, 2016
5 commits
-
MMC core pm_notify will re-detect card after system suspend/resume,
regardless of post-cd claim.
Since in current MMC implement, non-removeable card only detects once,
this will break post card detect which happens next.
e.g. when we suspend/resume system first, then load Broadcom wifi module,
we will get below dump:root@imx6qdlsolo:/mnt/nfs/vte_IMX6QP-Sabre-SD# modprobe bcmdhd firmware_path=/lib/firmware/bcm/ZP_BCM4339/fw_bcmdhd.bin nvram_path=/lib/firmware/bcm/ZP_BCM4339/bcmdhd.ZP.SDIO.cal
dhd_module_init in
Power-up adapter 'DHD generic adapter'
wifi_platform_bus_enumerate device present 1
failed to power up DHD generic adapter, 3 retry left
wifi_platform_bus_enumerate device present 0
-----------[ cut here ]-----------
Kernel BUG at 80513170 [verbose debug info unavailable]
Internal error: Oops - BUG: 0 1 PREEMPT SMP ARM
Modules linked in: bcmdhd ov5642_camera ov5640_camera_mipi_int ov5640_camera_int mxc_v4l2_capture mxc_dcic ipu_bg_overlay_sdc ipu_still v4l2_int_device ipu_prp_enc ipu_csi_enc ipu_fg_overlay_sdc
CPU: 1 PID: 1487 Comm: modprobe Not tainted 4.1.15-1.0.0+g54cf6a2 #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: a881e3c0 ti: a9152000 task.ti: a9152000
PC is at mmc_sdio_remove+0x7c/0x80
LR is at mmc_sdio_force_remove+0xc/0x34
pc : [] lr : [] psr: 60030013
sp : a9153d28 ip : 00000000 fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 7f0f76e0
r7 : a9153d58 r6 : 00000000 r5 : 00000000 r4 : a83f1800
r3 : 00000000 r2 : 00000000 r1 : 809c02f4 r0 : a83f1800
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c53c7d Table: 38d7804a DAC: 00000015
Process modprobe (pid: 1487, stack limit = 0xa9152210)
Stack: (0xa9153d28 to 0xa9154000)
3d20: 00000000 7f0c569c a9ffe440 00000003 00000000 7f0c58f4
3d40: a81942c0 8032e33c a8195960 7f0fbf68 00020002 00000000 a9153d58 a9153d58
3d60: fffffdfb 80bc0db4 a81af810 7f0f9518 fffffdfb 00000008 00000000 5624ce5c
3d80: 00000124 80381140 80bc0db4 a81af810 7f0f9518 00000000 00000008 8037f9dc
3da0: a81af810 7f0f9518 a81af844 80b288b0 00000000 8037fbec 00000000 7f0f9518
3dc0: 8037fb60 8037e068 a8025c5c a818fa34 7f0f9518 a20ff280 00000000 8037f16c
3de0: 7f0f0330 a9ffe440 00000000 7f0f9518 a9ffe440 00000000 80bb18f4 803801ec
3e00: 7f0fbf68 a9ffe440 00000000 7f0c5fdc 80b01720 80b01720 a9ffe440 7f11f000
3e20: 00000000 00000001 5624ce5c 80009730 abc7b120 800e316c 000000c8 a9209a00
3e40: 8040003f 00000001 00010000 800b0dfc 000000c8 8040003f abc7dc60 80afc2b0
3e60: abc75880 80afc260 a8001f00 80afe6c0 00000124 800e4944 7f0f9718 00000001
3e80: 7f0f9718 00000001 a9ffeb00 7f0f9718 a9db31c0 8078e47c 7f0f9718 a9db31c0
3ea0: a9153f58 00000001 a9db31c8 80094094 7f0f9724 00007fff 800910d4 00000000
3ec0: 00000000 7f0f9760 00000000 7f0f9860 c0fce8f4 7f0f9724 00000000 8079aa0c
3ee0: c0f07000 000c7944 00b6817a 00000000 0000000e 00000000 00000000 00000000
3f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3f20: 00000000 00000000 00000000 00000000 00000640 00000000 00000003 01608348
3f40: 0000017b 8000f604 a9152000 00000000 01608270 800944f8 c0f07000 000c7944
3f60: c0fce28c c0f83439 c0f99248 0007aff8 0008f968 00000000 00000000 00000000
3f80: 00000029 0000002a 00000020 00000024 00000015 00000000 01608348 00000073
3fa0: 00000000 8000f480 01608348 00000073 00000003 01608348 00000000 00000000
3fc0: 01608348 00000073 00000000 0000017b 01608218 00000000 00000073 01608270
3fe0: 7e9ab8c0 7e9ab8b0 0001f2c0 76eac340 600d0010 00000003 00000000 00000000
[] (mmc_sdio_remove) from [] (dhd_wifi_platform_load+0x180/0x39c [bcmdhd])
[] (dhd_wifi_platform_load [bcmdhd]) from [] (platform_drv_probe+0x44/0xac)
[] (platform_drv_probe) from [] (driver_probe_device+0x174/0x2b4)
[] (driver_probe_device) from [] (__driver_attach+0x8c/0x90)
[] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c)
[] (bus_for_each_dev) from [] (bus_add_driver+0x148/0x1f0)
[] (bus_add_driver) from [] (driver_register+0x78/0xf8)
[] (driver_register) from [] (dhd_wifi_platform_register_drv+0x1bc/0x208 [bcmdhd])
[] (dhd_wifi_platform_register_drv [bcmdhd]) from [] (do_one_initcall+0x8c/0x1d4)
[] (do_one_initcall) from [] (do_init_module+0x5c/0x1a8)
[] (do_init_module) from [] (load_module+0x1ba8/0x1e50)
[] (load_module) from [] (SyS_finit_module+0x80/0x90)
[] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x3c)Signed-off-by: Dong Aisheng
-
With igore pm notify feature, MMC core will not re-detect card
after system suspend/resume. This is needed for some special cards
like Broadcom WiFi which can't work propertly on card re-detect
after system resume.Signed-off-by: Dong Aisheng
-
The root cause of these failures is related with a hardware
ERRATA (onComp2 flop power-up value is 1 instead of 0).
Preview patch c086763024a8117beaa8ea27ee88eaeafd03ef3e in issue
track #1105 is not a fully fix, here implement a DummyDraw to
workaround the hardware ERRATA.Signed-off-by: Richard Liu
(cherry picked from commit cc78790048a81de6c218c09766277ef3be34ffd0) -
restore the pinmux when resume from LPSR mode in suspend.
Signed-off-by: Robby Cai
(cherry picked from commit 0462eb2cb8b64508260d9c6daa9f163d68ea6be0)Conflicts:
drivers/video/mxsfb.c -
The pwm1's pin belongs to lpsr iomux. So this should
be corrected.Signed-off-by: Fancy Fang
(cherry picked from commit 94f87fc66f354dea8537d360732612ac5d6d65e6)
29 Feb, 2016
1 commit
-
Add ADC support for imx7d-12x12-lpddr3-arm2 board.
Signed-off-by: Haibo Chen
26 Feb, 2016
3 commits
-
SIM1 IOMUX is changed into reset state in LPSR mode.As a result,
sim can't work again.This patch sets sim1 IOMUX to default state after existing from LPSR mode.
(cherry-picked from commit 8e237775cd413645bfd806e4c648954e1a773a2d)
Signed-off-by: Gao Pan
-
SPI IOMUX is changed into reset state in LPSR mode. As a result,
spi can't work again.This patch sets spi IOMUX to default state.
(cherry-picked from commit 2c8603c31831bb355f6be5b015377fb8fbd89844)
Signed-off-by: Gao Pan
-
Add spi1 IOMUX sleep state in imx7d-12x12-lpddr3-arm2.dts.
Signed-off-by: Gao Pan
25 Feb, 2016
1 commit
-
Add 100Mhz (HIGH_AUDIO_CLK) bus frequency support for imx6q lpddr2 targets
On HIGH_AUDIO_CLK busfreq request source dram mmdc clock root from
pll2_pfd2_div_2 to generate 100Mhz operation frequency.Signed-off-by: Adrian Alonso
Signed-off-by: Anson Huang
(cherry-picked from commit 5bc118112b36b72ed6b1e75a3760c371b486abec)
24 Feb, 2016
1 commit
-
Before entering LPSR mode, as GPC was set to STOP/DSM mode already,
the wfi loop after LPSR mode would cause system enter STOP/DSM mode
first, then SNVS will force PMIC_ON_REQ to low, as SNVS needs IPG
clock to be on before entering SNVS/LPSR mode, so we have to disable
STOP/DSM mode to make sure IPG clock is on before SNVS actually enters
LPSR mode.Signed-off-by: Anson Huang
23 Feb, 2016
1 commit
-
In the lpddr3-arm2-m4 dts, the I2C1 is disabled, so PMIC is disabled,
the cpufreq is not support. As thermal driver is depended on cpufreq
driver, if cpufreq is not support, the tempmon device can be disabled.Signed-off-by: Bai Ping
22 Feb, 2016
3 commits
-
Wait PU LDO ramp before GPU power on once system resume back on i.mx6qp,
otherwise, GPU resume may hang.Signed-off-by: Robin Gong
(cherry picked from commit 361af86190c160e0ea66e007c61b18a793149b74)
(cherry picked from commit 7ddd834bde557db1b62ea2ae683455cc75ba858e) -
Since 4.1, linux kernel has dropped CONFIG_PM_RUNTIME macro. And
CONFIG_PM is used instead. GPU driver should be synced with the change.Date Feb 22, 2016
Signed-off-by: Shawn Xiao
-
The 'csi_sel' clock is in ccm instead of anatop.
So correct the wrong register address used.Signed-off-by: Fancy Fang
(cherry picked from commit 2a1a58c63f4aeba3733f74efdaef3784186ef15c)
21 Feb, 2016
1 commit
-
Before changing the ARM_PODF, the pll1_bypass clock should be enabled and
bypassed to make sure the ARM_PODF can be changed.Signed-off-by: Bai Ping
(cherry picked from commit 78916c528cb424b20e87887c85246fceac81f3b4)
19 Feb, 2016
5 commits
-
When first initialized, cur_tx points to the 1st
entry in the queue, and dirty_tx points to the last.
At this point, fec_enet_get_free_txdesc_num will
return tx_ring_size -2. If tx_ring_size -2 entries
are now queued, then fec_enet_get_free_txdesc_num
should return 0, but it returns tx_ring_size instead.Signed-off-by: Troy Kisky
Signed-off-by: David S. Miller -
On an overrun, the other flags are not
valid, so don't check them.Also, don't pass bad frames up the stack.
Signed-off-by: Troy Kisky
Signed-off-by: David S. Miller -
Setting the FTRL register will stop the fec from
trying to use multiple receive buffers.Signed-off-by: Troy Kisky
Signed-off-by: David S. Miller -
PU can be dynamically turned off or on, so we need remove
"regulator-always-on" property.Signed-off-by: Robin Gong
(cherry picked from commit f3c0df15fbecce36cae531a4a919d544f9ea8e2a) -
In .mdio_bus_phy_may_suspend(), there check netdev is NULL to judge to set
phy to suspend status.netdev is NULL has three cases:
- phy is not found
- phy is found, match to general phy driver
- phy is found, match to specifical phy driverCase 1: phy is not found, cannot communicate by MDIO bus.
Case 2: phy is found:
if phy dev driver probe/bind err, netdev is not __open__ status,
mdio bus is unregistered.
if phy is detached, phy had entered suspended status.
Case 3: phy is found, phy is detached, phy had entered suspended status.So, in here, it shouldn't set phy to suspend by calling mdio bus.
In i.MX6UL evk/arm2 board, if down the ethx interface and do suspend/resume,
system will hang. Because after ethx down all clocks are gated off, for general
phy driver, unbind the phy device, for specifical phy driver, no unbind the
device, and the original driver call mdio bus to set phy to suspend during
system suspend, so system will hang since there have mdio register access.
The patch can fix it.Signed-off-by: Fugang Duan
(cherry picked and merged from commit: ccbbf6172860e310858169a4e551ebf072c2f1a5)Conflicts:
drivers/net/phy/mdio_bus.c
18 Feb, 2016
3 commits
-
Update the i.MX6DL cpu operating points to comply with the latest
published datasheet. Latest i.MX6DL datasheet of Rev.4, 10/2014
updates the 396MHz setpoint's min voltage from 1.075V to 1.125V, Add a
25mV margin to cover the board IR drop, here use 1.15V for 396MHz to
match datasheet.Signed-off-by: Bai Ping
(cherry picked from commit 13c0324e8a006478c1b2045be6e84587b9857ad8) -
Add cpudile driver support for i.MX6DL.
Signed-off-by: Bai Ping
(cherry picked from commit 72809d405ca73f85c0397fa277ba2481512fe521) -
On i.MX6UL, PGC_CPU_PUPSCR_SW's counter uses IPG/2048 as clock
source, as IPG is at 1.5MHz during low power idle, so the power
up time can be up to 1.3mS which is too long for idle.Since TO1.1, design team re-define the bit[5], if this bit is
set to 1, the clock will be IPG/32, ~22us, enable this function
for TO1.1, the latency value for low power idle needs to be
adjusted accordingly.Signed-off-by: Anson Huang
Signed-off-by: Robin Gong
(cherry picked from commit 1036fbdba0111d7fa21acb810e01907db8997a31)
17 Feb, 2016
6 commits
-
Change SLV_DLY_TARGET to IC recommended value 0x7(4/1 cycle)
according to spec.
The old value 0x1 is not robust and may fail in some critical
circumstance.Signed-off-by: Dong Aisheng
(cherry picked from commit 3c755f08de810824250c935d099f3f8c7def4946) -
When enable DDR, the clock factor definition is changed.
e.g. original 200Mhz will be changed to 100Mhz if set MIX_CTRL_DDREN bit.
So we need to update the clock setting for strobe dll to lock
the correct clock rate.Additionally we also need disable the clock before locking strobe dll.
Signed-off-by: Dong Aisheng
(cherry picked from commit 4d8095a6e860f773f5d2e4d5b62a6f4ba1a92431) -
The periph_pre, periph2_pre, periph_clk2_sel and periph2_clk2_sel
should be registered as 'imx_clk_mux_bus' type.Signed-off-by: Bai Ping
(cherry picked from commit c84612adf2ee69b019ef500fe387ad930a5ed151) -
The cause is EPDC works not stable if DISP mix is enabled.
Signed-off-by: Robby Cai
(cherry picked from commit db5b89bd35d259504da1c15d62f898f1291541e2)
(cherry picked from commit 35f41cd363c076a0f429106e2a043992125c36ac) -
Add power-domains for display domain for imx6sl.
Signed-off-by: Fancy Fang
(cherry picked from commit c7d94716a0fcf711a447c0490a81f69bee0cd8dd) -
Add power-domains for display domain for imx6sx.
Signed-off-by: Fancy Fang
(cherry picked from commit cd1d72f0a0f7effe91ca7f191aadc3efac5d1a1c)
16 Feb, 2016
5 commits
-
Fake one caps_1 register indicating hw auto retuning support since mx6qdl
does not have it and enable auto retuning in post_tuning process.Signed-off-by: Dong Aisheng
(cherry picked from commit b46b1ee480ce731165843f43481809b028203dd1) -
Enable HW auto retuning when set SDHCI_CTRL_EXEC_TUNING and clear it
when clear SDHCI_CTRL_TUNED_CLK.Signed-off-by: Dong Aisheng
(cherry picked from commit d07db4fdf967ad8ecebb751f2ea24a578dfb9395) -
If HW supports SDHCI_TUNING_MODE_3 which is auto retuning, we won't
retune during runtime suspend and resume, instead we use Re-tuning
Request signaled via SDHCI_INT_RETUNE interrupt to do retuning and
hw auto retuning during data transfer to guarantee the signal sample
window correction.This can avoid a mass of repeatly retuning during small file system
data access and improve the performance.Signed-off-by: Dong Aisheng
(cherry picked from commit 89c224b34d3a63797d956969c2fdf4ccb7ff25bf) -
We see CRCs with SLV_DLY_TARGET of 7 during driver runtime suspend/resume
if disable sw auto retuning. Back to SLV_DLY_TARGET of 1 which is used
in 3.14 kernel and don't have such issue.Signed-off-by: Dong Aisheng
(cherry picked from commit cfcd9c369186ddc8c9e25e7c7573f91a4516449d) -
When enable WIFi and connected with AP, the system is unable to suspend.
root@imx6qdlsolo:~# echo standby > /sys/power/state
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
dhdsdio_isr: Enter
dhdsdio_isr: Enter
dhdsdio_isr: disable SDIO interrupts
Calling dhdsdio_dpc() from dhdsdio_isr
dhdsdio_dpc: Enter
dhdsdio_bussleep: request WAKE (currently SLEEP)(Keypress still response here.... )
It's caused by Broadcom WiFi driver will keep handling SDIO irq even after
the driver is already suspended.
This weird behavior will block the MMC host suspend during its irq
synchronize operation in free_irq(), then the system suspend is blocked
too and hanged.Add SDHCI_QUIRK2_SDIO_IRQ_THREAD for BCM WiFi to use kernel thread
to process sdio interrupts which won't block system suspend and process
freeze operation.Signed-off-by: Dong Aisheng
(cherry picked from commit 66b534082968214707d54d96ba142bc528a6e1de)