15 Oct, 2020
1 commit
-
Switch to using the iomap readpage and writepage helpers for all I/O in
the ordered and writeback modes, and thus eliminate using buffer_heads
for I/O in these cases. The journaled data mode is left untouched.(Andreas Gruenbacher: In gfs2_unstuffer_page, switch from mark_buffer_dirty
to set_page_dirty instead of accidentally leaving the page / buffer clean.)Signed-off-by: Christoph Hellwig
Signed-off-by: Andreas Gruenbacher
05 Jun, 2019
1 commit
-
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license version 2extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner
Reviewed-by: Allison Randal
Reviewed-by: Kate Stewart
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman
08 May, 2019
1 commit
-
This patch fixes regressions in 588bff95c94efc05f9e1a0b19015c9408ed7c0ef.
Due to that patch, function clean_journal was setting the value of
sd_log_flush_head, but that's only valid if it is replaying the node's
own journal. If it's replaying another node's journal, that's completely
wrong and will lead to multiple problems. This patch tries to clean up
the mess by passing the value of the logical journal block number into
gfs2_write_log_header so the function can treat non-owned journals
generically. For the local journal, the journal extent map is used for
best performance. For other nodes from other journals, new function
gfs2_lblk_to_dblk is called to figure it out using gfs2_iomap_get.This patch also tries to establish more consistency when passing journal
block parameters by changing several unsigned int types to a consistent
u32.Fixes: 588bff95c94e ("GFS2: Reduce code redundancy writing log headers")
Signed-off-by: Bob Peterson
Signed-off-by: Andreas Gruenbacher
04 Jun, 2018
1 commit
-
Clean up gfs2_iomap_alloc and gfs2_iomap_get. Document how
gfs2_iomap_alloc works: it now needs to be called separately after
gfs2_iomap_get where necessary; this will be used later by iomap write.
Move gfs2_iomap_ops into bmap.c.Introduce a new gfs2_iomap_get_alloc helper and use it in
fallocate_chunk: gfs2_iomap_begin will become unsuitable for fallocate
with proper iomap write support.In gfs2_block_map and fallocate_chunk, zero-initialize struct iomap.
Signed-off-by: Andreas Gruenbacher
Signed-off-by: Bob Peterson
19 Jan, 2018
1 commit
-
Implement the top-level bits of punching a hole into a file.
Signed-off-by: Andreas Gruenbacher
Signed-off-by: Bob Peterson
31 Oct, 2017
1 commit
-
This patch implements iomap for block mapping, and switches the
block_map function to use it under the covers.The additional IOMAP_F_BOUNDARY iomap flag indicates when iomap has
reached a "metadata boundary" and fetching the next mapping is likely to
incur an additional I/O. This flag is used for setting the bh buffer
boundary flag.Signed-off-by: Bob Peterson
Signed-off-by: Andreas Gruenbacher
03 Mar, 2014
1 commit
-
This patch fixes a long standing issue in mapping the journal
extents. Most journals will consist of only a single extent,
and although the cache took account of that by merging extents,
it did not actually map large extents, but instead was doing a
block by block mapping. Since the journal was only being mapped
on mount, this was not normally noticeable.With the updated code, it is now possible to use the same extent
mapping system during journal recovery (which will be added in a
later patch). This will allow checking of the integrity of the
journal before any reply of the journal content is attempted. For
this reason the code is moving to bmap.c, since it will be used
more widely in due course.An exercise left for the reader is to compare the new function
gfs2_map_journal_extents() with gfs2_write_alloc_required()Additionally, should there be a failure, the error reporting is
also updated to show more detail about what went wrong.Signed-off-by: Steven Whitehouse
20 Sep, 2010
1 commit
-
This updates GFS2's truncate code to use the new truncate
sequence correctly. This is a stepping stone to being
able to remove ip->i_disksize in favour of using i_size
everywhere now that the two sizes are always identical.Signed-off-by: Steven Whitehouse
Cc: Nick Piggin
Cc: Christoph Hellwig
29 Jul, 2010
1 commit
-
Function gfs2_write_alloc_required always returned zero as its
return code. Therefore, it doesn't need to return a return code
at all. Given that, we can use the return value to return whether
or not the dinode needs block allocations rather than passing
that value in, which in turn simplifies a bunch of error checking.Signed-off-by: Bob Peterson
Signed-off-by: Steven Whitehouse
05 Jan, 2009
1 commit
-
This patch removes some unused code, and make the calculation
of the number of blocks required conditional in order to reduce
the number of times this (potentially expensive) calculation
is done.Signed-off-by: Steven Whitehouse
25 Jan, 2008
1 commit
-
This patch is just a cleanup. Function gfs2_get_block() just calls
function gfs2_block_map reversing the last two parameters. By
reversing the parameters, gfs2_block_map() may be called directly
and function gfs2_get_block may be eliminated altogether.
Since this function is done for every block operation,
this streamlines the code and makes it a little bit more efficient.Signed-off-by: Bob Peterson
Signed-off-by: Steven Whitehouse
20 Oct, 2006
1 commit
-
This fix means that bmap will map extents of the length requested
by the VFS rather than guessing at it, or just mapping one block
at a time. The other callers of gfs2_block_map are audited to ensure
they send the correct max extent lengths (i.e. set bh->b_size correctly).Signed-off-by: Steven Whitehouse
19 Sep, 2006
1 commit
-
This is a tidy up of the GFS2 bmap code. The main change is that the
bh is passed to gfs2_block_map allowing the flags to be set directly
rather than having to repeat that code several times in ops_address.c.At the same time, the extent mapping code from gfs2_extent_map has
been moved into gfs2_block_map. This allows all calls to gfs2_block_map
to map extents in the case that no allocation is taking place. As a
result reads and non-allocating writes should be faster. A quick test
with postmark appears to support this.There is a limit on the number of blocks mapped in a single bmap
call in that it will only ever map blocks which are pointed to
from a single pointer block. So in other words, it will never try
to do additional i/o in order to satisfy read-ahead. The maximum
number of blocks is thus somewhat less than 512 (the GFS2 4k block
size minus the header divided by sizeof(u64)). I've further limited
the mapping of "normal" blocks to 32 blocks (to avoid extra work)
since readpages() will currently read a maximum of 32 blocks ahead (128k).Some further work will probably be needed to set a suitable value
for DIO as well, but for now thats left at the maximum 512 (see
ops_address.c:gfs2_get_block_direct).There is probably a lot more that can be done to improve bmap for GFS2,
but this is a good first step.Signed-off-by: Steven Whitehouse
05 Sep, 2006
2 commits
-
As per Jan Engelhardt's comments, this should make all the headers
compile on their own by including and/or declaring structures
early.Cc: Jan Engelhardt
Signed-off-by: Steven Whitehouse -
This makes all fixed size types have consistent names.
Cc: Jan Engelhardt
Signed-off-by: Steven Whitehouse
01 Sep, 2006
1 commit
-
As per comments from Jan Engelhardt this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.Cc: Jan Engelhardt
Signed-off-by: Steven Whitehouse
26 Jul, 2006
1 commit
-
Tidy up gfs2_unstuffer_page by:
a) Moving it into bmap.c
b) Making it static
c) Calling it directly from gfs2_unstuff_dinode
d) Updating all callers of gfs2_unstuff_dinode due to one less
required argument.It doesn't change the behaviour at all.
Signed-off-by: Steven Whitehouse
19 May, 2006
1 commit
-
Signed-off-by: Steven Whitehouse
06 May, 2006
1 commit
-
This adds readpages support (and also corrects a small bug in
the readpage error path at the same time). Hopefully this will
improve performance by allowing GFS to submit larger lumps of
I/O at a time.In order to simplify the setting of BH_Boundary, it currently gets
set when we hit the end of a indirect pointer block. There is
always a boundary at this point with the current allocation code.
It doesn't get all the boundaries right though, so there is still
room for improvement in this.See comments in fs/gfs2/ops_address.c for further information about
readpages with GFS2.Signed-off-by: Steven Whitehouse
28 Apr, 2006
1 commit
-
This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 unused functions
- remove the following global function that was both unused and
unimplemented:
- super.c: gfs2_do_upgrade()Signed-off-by: Adrian Bunk
Signed-off-by: Steven Whitehouse
30 Jan, 2006
1 commit
-
Signed-off-by: Steven Whitehouse
24 Jan, 2006
1 commit
-
For some reason a function pointer was being passed through
the truncate code which only ever took one value. This removes
the function pointer and replaces it with a single call to
the function in question.Signed-off-by: Steven Whitehouse
18 Jan, 2006
1 commit
-
Signed-off-by: Steven Whitehouse
17 Jan, 2006
1 commit
-
This patch contains all the core files for GFS2.
Signed-off-by: David Teigland
Signed-off-by: Steven Whitehouse
