29 Dec, 2010
40 commits
-
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
Tested-by: jim smyth
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
Also, in ov534, don't check the parm type.
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
When an error is set for an isochronous packet, the length of the packet
may be null. In this case, the error was not detected and the image
was not discarded as it should be.Reported-by: Franck Bourdonnec
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
These are OmniVision's OV7660 and OV9630.
Don't register the webcam when they are found.Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
This patch adds the Vendor:Product number of the Lego Bionicle camera to
the existing gspca/sq905c.c and also a line for the camera in gspca.txt.
The camera works "out of the box" with these small changes. So this is
just in time for Christmas. Think of the children.Signed-off-by: Theodore Kilgore
Signed-off-by: Jean-François Moine
Signed-off-by: Mauro Carvalho Chehab -
Remove BKL ioctl and use unlocked_ioctl with core-assisted locking instead.
Signed-off-by: Pete Eberlein
Signed-off-by: Mauro Carvalho Chehab -
Remove usage of BKL by usign per-device mutex.
Signed-off-by: Marek Szyprowski
CC: Pawel Osciak
Signed-off-by: Mauro Carvalho Chehab -
This is a copy and paste error. It should be using sizeof(cap->driver)
instead of sizeof(cap->card).Signed-off-by: Dan Carpenter
Cc: Richard Rojförs
Signed-off-by: Mauro Carvalho Chehab -
Hi,
release_firmware() just does nothing if passed a NULL pointer. So there's
no reason to test before the call in
saa7164-fw.c::saa7164_downloadfirmware().Removing the pointless conditional also saves a few bytes.
before:
text data bss dec hex filename
7943 112 2144 10199 27d7 drivers/media/video/saa7164/saa7164-fw.o
after:
text data bss dec hex filename
7931 112 2136 10179 27c3 drivers/media/video/saa7164/saa7164-fw.oSigned-off-by: Jesper Juhl
Cc: Steven Toth
Signed-off-by: Mauro Carvalho Chehab -
Adds USB PIDs for the Elgato EyeTV Sat device.
This device is a clone of the Terratec S7.Signed-off-by: Sam Doshi
Signed-off-by: Mauro Carvalho Chehab -
Streaming using mmap didn't work in the VIU driver. We need to
start/stop DMA in streamon/streamoff and free the buffers on
release. Add appropriate driver extension now.Signed-off-by: Anatolij Gustschin
Signed-off-by: Mauro Carvalho Chehab -
zr->frame_num is a counter and && was intended here instead of &.
Signed-off-by: Dan Carpenter
Signed-off-by: Mauro Carvalho Chehab -
On Fri, 2010-12-03 at 09:32 -0200, Mauro Carvalho Chehab wrote:
> Em 27-11-2010 11:13, Malcolm Priestley escreveu:
> > Driver Version v1.73 - Frontend attach change.
> > To stop double rc registration in multi tuner environment or firmware change.
> >
> > Signed-off-by: Malcolm Priestley
> >
> >
> > +static int lme_name(struct dvb_usb_adapter *adap)
> > +{
> > + struct lme2510_state *st = adap->dev->priv;
> > + const char *desc = adap->dev->desc->name;
> > + char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395"};
> > + char *name = adap->fe->ops.info.name;
> > +
> > + strcpy(name, desc);
> > + strcat(name, fe_name[st->tuner_config]);
>
> Please use, instead, strlcpy/strlcat, to avoid writing outside the buffer size.
>Driver Version v1.74
Amended patch with change to strlcpy/strlcat.Signed-off-by: Malcolm Priestley
Signed-off-by: Mauro Carvalho Chehab -
Fix em28xx build by adding hardirq.h header file:
drivers/media/video/em28xx/em28xx-vbi.c:49: error: implicit declaration of function 'in_interrupt'
Reported-by: Zimny Lech
Signed-off-by: Randy Dunlap
Signed-off-by: Mauro Carvalho Chehab -
'n' may be bigger than MAX_INT*sizeof(int), if so checking of truncated
(int)(n/sizeof(int)) for LIRCBUF_SIZE overflow and then using nontruncated 'count'
doesn't make sense. Also n may be up to sizeof(int)-1 bytes bigger than expected,
so check value of (n % sizeof(int)) too.Signed-off-by: Vasiliy Kulikov
Acked-by: Jarod Wilson
Signed-off-by: Mauro Carvalho Chehab -
This module implements V4L2 controls for the Texas Instruments
WL1273 FM Radio and handles the communication with the chip.Signed-off-by: Matti J. Aaltonen
Signed-off-by: Mauro Carvalho Chehab -
This is the core of the WL1273 FM radio driver, it connects
the two child modules. The two child drivers are
drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.The radio-wl1273 driver implements the V4L2 interface and communicates
with the device. The ALSA codec offers digital audio, without it only
analog audio is available.Signed-off-by: Matti J. Aaltonen
Acked-by: Samuel Ortiz
Signed-off-by: Mauro Carvalho Chehab -
Add support for cameras with the HV7131D sensor, such as the 0c45:602a
Signed-off-by: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
Our old start of frame detection code wrongly assumes that the sof
marker always lives at the beginning of the frame. At least for the
0c45:602a camera this is not the case. This patch also improves
the framerate from 28 fps to 30 fps with the 0c45:6005 and 0c45:6007Signed-off-by: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
I've a 0c45:6007 camera and it works fine with the gspca_sonixb driver,
so make that handle it instead of the deprecated sn9c102 driver.Signed-off-by: Hans de Goede
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
At Pixelview SBTVD Hybrid, the bits sent by the IR are inverted. Due to that,
the existing keytables produce wrong codes.Signed-off-by: Mauro Carvalho Chehab
-
This fixes the following error in PowerPC builds:
drivers/media/video/timblogiw.c: In function 'timblogiw_probe':
drivers/media/video/timblogiw.c:749: error: timblogiw_ioctl_ops causes a section type conflictSigned-off-by: Stephen Rothwell
Signed-off-by: Mauro Carvalho Chehab -
Support for mt9m001 (mi1300) is broken:
- Table is incomplete;
- Only one resolution is currently supported by the driver;
- Resolution is incomplete;
- it complains about broken JPEG headers.Use the same init found on em28xx driver, and properly report the
output format as 8-bits GRAY.Acked-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Changeset 35680ba broke several devices:
- Sony Playstation Eye (1415:2000);
- Gigaware model 25-234 (0c45:628f);
- Logitech Messenger Plus (046d:08f6).Probably more devices were broken by this change.
What happens is that several devices don't need to save some bandwidth
for audio.Also, as pointed by Hans de Goede , the logic
that implements the bandwidth reservation for audio is broken, since
it will reduce the alt number twice, on devices with audio.So, let's just revert the broken logic, and think on a better solution
for usb 1.1 devices with audio that can't use the maximum packetsize.Acked-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Use macros for the supported scales, instead of using magic numbers
from 0 to 3.Code become cleaner by using macros for it.
Acked-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Instead of just assuming a ov9650 sensor based on USB ID,
double-check it, by reading the sensor ID.Acked-by: Jean-Francois Moine
Signed-off-by: Mauro Carvalho Chehab -
Add kycodes for DSR-0112 remote that comes together with
Haupauge MiniStick
http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg[mchehab@redhat.com: Fix KEY_PREVIOUS to match the definition for the other model]
Signed-off-by: Richard Zidlicky
Acked-by: Jarod Wilson
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Joe Perches
Signed-off-by: Mauro Carvalho Chehab -
I found that the problems people have reported with the USB-TV-stick
"Terratec Cinergy Hybrid T USB XS" (USB-ID: 0ccd:0042)
are coming from a wrong header file in the v4l-sources.Attached is a diff, which fixes the problem (tested successfully here).
Obviously the USB-ID has been associated with a wrong chip: EM2880
instead of EM2882, which would be correct.Reported-by: Philippe Bourdin
Signed-off-by: Mauro Carvalho Chehab -
kobject_set_name() may fail with -ENOMEM, check for it.
Signed-off-by: Vasiliy Kulikov
Acked-by: Jarod Wilson
Signed-off-by: Mauro Carvalho Chehab -
This patch adds a loopback driver to rc-core which I've found useful for
running scripted tests of different parts of rc-core without having to
fiddle with real hardware.Basically it emulates hardware with a learning and a non-learning
receiver and two transmitters (which correspond to the two
receivers). TX data that is sent is fed back as input on the
corresponding receiver, which allows for debugging of IR decoders,
keymaps, etc.Signed-off-by: David Härdeman
Acked-by: Jarod Wilson
Signed-off-by: Mauro Carvalho Chehab -
At ir_setkeycode, if INPUT_KEYMAP_BY_INDEX is used, the routine may return
an invalid value if not error.Signed-off-by: Mauro Carvalho Chehab
-
The RC5 old decoder used custom_irq to indicate the need of handling
the IRQ on a different way. Instead of doing it, let the core just call the
bttv input IRQ handler, and add the code there to call the legacy decoder.While here, remove the gpioq waitqueue, as this is not used anywhere, and
add a debug msg to help removing the legacy RC5 code.Signed-off-by: Mauro Carvalho Chehab
-
The lock isn't held here and doesn't need to be unlocked. The code has
been like this since the driver was merged.Signed-off-by: Dan Carpenter
Signed-off-by: Mauro Carvalho Chehab
