03 Sep, 2020

1 commit


14 Jun, 2020

1 commit

  • Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
    '---help---'"), the number of '---help---' has been gradually
    decreasing, but there are still more than 2400 instances.

    This commit finishes the conversion. While I touched the lines,
    I also fixed the indentation.

    There are a variety of indentation styles found.

    a) 4 spaces + '---help---'
    b) 7 spaces + '---help---'
    c) 8 spaces + '---help---'
    d) 1 space + 1 tab + '---help---'
    e) 1 tab + '---help---' (correct indentation)
    f) 1 tab + 1 space + '---help---'
    g) 1 tab + 2 spaces + '---help---'

    In order to convert all of them to 1 tab + 'help', I ran the
    following commend:

    $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

05 Jan, 2020

1 commit

  • Apply const prefix at every place where appropriate: the static
    register tables, the volume tables and the callback tables.

    Just for minor optimization and no functional changes.

    Link: https://lore.kernel.org/r/20200105144823.29547-3-tiwai@suse.de
    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

03 Jan, 2020

2 commits


11 Dec, 2019

2 commits


06 Nov, 2019

1 commit


29 Jul, 2019

1 commit

  • A lot of places in the driver use onyx_read_register() without
    checking the return value, and it's been working OK for ~10 years
    or so, so probably never fails ... Rather than trying to check the
    return value everywhere, which would be relatively intrusive, at
    least make sure we don't use an uninitialized value.

    Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
    Reported-by: Stephen Rothwell
    Signed-off-by: Johannes Berg
    Signed-off-by: Takashi Iwai

    Johannes Berg
     

19 Jun, 2019

1 commit

  • Based on 1 normalized pattern(s):

    gpl v2 can be found in copying

    extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

    has been chosen to replace the boilerplate/reference in 20 file(s).

    Signed-off-by: Thomas Gleixner
    Reviewed-by: Allison Randal
    Reviewed-by: Alexios Zavras
    Reviewed-by: Enrico Weigelt
    Cc: linux-spdx@vger.kernel.org
    Link: https://lkml.kernel.org/r/20190602204655.283615864@linutronix.de
    Signed-off-by: Greg Kroah-Hartman

    Thomas Gleixner
     

21 May, 2019

1 commit


20 Feb, 2019

1 commit


08 Feb, 2019

1 commit

  • ASoC: Updates for v5.1

    Lots and lots of new drivers so far, a highlight being the MediaTek
    BTCVSD which is a driver for a Bluetooth radio chip - the first such
    driver we've had upstream. Hopefully we will soon also see a baseband
    with an upstream driver!

    - Support for only powering up channels that are actively being used.
    - Quite a few improvements to simplify the generic card drivers,
    especially the merge of the SCU cards into the main generic drivers.
    - Lots of fixes for probing on Intel systems, trying to rationalize
    things to look more standard from a framework point of view.
    - New drivers for Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341,
    Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek
    BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum
    DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters.

    Takashi Iwai
     

16 Jan, 2019

1 commit


08 Jan, 2019

1 commit

  • We already need to zero out memory for dma_alloc_coherent(), as such
    using dma_zalloc_coherent() is superflous. Phase it out.

    This change was generated with the following Coccinelle SmPL patch:

    @ replace_dma_zalloc_coherent @
    expression dev, size, data, handle, flags;
    @@

    -dma_zalloc_coherent(dev, size, handle, flags)
    +dma_alloc_coherent(dev, size, handle, flags)

    Suggested-by: Christoph Hellwig
    Signed-off-by: Luis Chamberlain
    [hch: re-ran the script on the latest tree]
    Signed-off-by: Christoph Hellwig

    Luis Chamberlain
     

06 Dec, 2018

2 commits


19 Nov, 2018

1 commit

  • Remove directly accessing device_node.type pointer and use the accessors
    instead. This will eventually allow removing the type pointer.

    Replace the open coded iterating over child nodes with
    for_each_child_of_node() while we're here.

    Cc: Johannes Berg
    Cc: Jaroslav Kysela
    Cc: Takashi Iwai
    Cc: linuxppc-dev@lists.ozlabs.org
    Cc: alsa-devel@alsa-project.org
    Signed-off-by: Rob Herring
    Signed-off-by: Takashi Iwai

    Rob Herring
     

04 Sep, 2018

1 commit


30 Jun, 2018

1 commit

  • Both calls to of_find_node_by_name() and of_get_next_child() return a
    node pointer with refcount incremented thus it must be explicidly
    decremented here after the last usage. As we are assured to have a
    refcounted np either from the initial
    of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np)
    in the while loop if we reached the error code path below, an
    x of_node_put(np) is needed.

    Signed-off-by: Nicholas Mc Guire
    Fixes: commit f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
    Signed-off-by: Takashi Iwai

    Nicholas Mc Guire
     

02 Nov, 2017

1 commit

  • Many source files in the tree are missing licensing information, which
    makes it harder for compliance tools to determine the correct license.

    By default all files without license information are under the default
    license of the kernel, which is GPL version 2.

    Update the files which contain no license information with the 'GPL-2.0'
    SPDX license identifier. The SPDX identifier is a legally binding
    shorthand, which can be used instead of the full boiler plate text.

    This patch is based on work done by Thomas Gleixner and Kate Stewart and
    Philippe Ombredanne.

    How this work was done:

    Patches were generated and checked against linux-4.14-rc6 for a subset of
    the use cases:
    - file had no licensing information it it.
    - file was a */uapi/* one with no licensing information in it,
    - file was a */uapi/* one with existing licensing information,

    Further patches will be generated in subsequent months to fix up cases
    where non-standard license headers were used, and references to license
    had to be inferred by heuristics based on keywords.

    The analysis to determine which SPDX License Identifier to be applied to
    a file was done in a spreadsheet of side by side results from of the
    output of two independent scanners (ScanCode & Windriver) producing SPDX
    tag:value files created by Philippe Ombredanne. Philippe prepared the
    base worksheet, and did an initial spot review of a few 1000 files.

    The 4.13 kernel was the starting point of the analysis with 60,537 files
    assessed. Kate Stewart did a file by file comparison of the scanner
    results in the spreadsheet to determine which SPDX license identifier(s)
    to be applied to the file. She confirmed any determination that was not
    immediately clear with lawyers working with the Linux Foundation.

    Criteria used to select files for SPDX license identifier tagging was:
    - Files considered eligible had to be source code files.
    - Make and config files were included as candidates if they contained >5
    lines of source
    - File already had some variant of a license header in it (even if
    Reviewed-by: Philippe Ombredanne
    Reviewed-by: Thomas Gleixner
    Signed-off-by: Greg Kroah-Hartman

    Greg Kroah-Hartman
     

29 Aug, 2017

1 commit


19 Aug, 2017

1 commit


16 Aug, 2017

1 commit


30 May, 2017

1 commit

  • Declare snd_kcontrol_new structures as const as they are only passed an
    argument to the function snd_ctl_new1. This argument is of type const,
    so snd_kcontrol_new structures having this property can be made const.
    Done using Coccinelle:

    @r disable optional_qualifier@
    identifier x;
    position p;
    @@
    static struct snd_kcontrol_new x@p={...};

    @ok@
    identifier r.x;
    position p;
    @@
    snd_ctl_new1(&x@p,...)

    @bad@
    position p != {r.p,ok.p};
    identifier r.x;
    @@
    x@p

    @depends on !bad disable optional_qualifier@
    identifier r.x;
    @@
    +const
    struct snd_kcontrol_new x;

    Cross compiled these files:
    sound/aoa/codecs/tas.c - powerpc
    sound/mips/{hal2.c/sgio2audio.c} - mips
    sound/ppc/{awacs.c/beep.c/tumbler.c} - powerpc
    sound/soc/sh/siu_dai.c - sh
    Could not find an architecture to compile sound/sh/aica.c.

    Signed-off-by: Bhumika Goyal
    Acked-by: Mark Brown
    Signed-off-by: Takashi Iwai

    Bhumika Goyal
     

08 Oct, 2016

1 commit

  • Pull powerpc updates from Michael Ellerman:
    "Highlights:
    - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin)
    - Use gas sections for arranging exception vectors et. al.
    - Large set of TM cleanups and selftests (Cyril Bur)
    - Enable transactional memory (TM) lazily for userspace (Cyril Bur)
    - Support for XZ compression in the zImage wrapper (Oliver
    O'Halloran)
    - Add support for bpf constant blinding (Naveen N. Rao)
    - Beginnings of upstream support for PA Semi Nemo motherboards
    (Darren Stevens)

    Fixes:
    - Ensure .mem(init|exit).text are within _stext/_etext (Michael
    Ellerman)
    - xmon: Don't use ld on 32-bit (Michael Ellerman)
    - vdso64: Use double word compare on pointers (Anton Blanchard)
    - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui)
    - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy)
    - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K
    (Aneesh Kumar K.V)
    - Fix memory leak in queue_hotplug_event() error path (Andrew
    Donnellan)
    - Replay hypervisor maintenance interrupt first (Nicholas Piggin)

    Various performance optimisations (Anton Blanchard):
    - Align hot loops of memset() and backwards_memcpy()
    - During context switch, check before setting mm_cpumask
    - Remove static branch prediction in atomic{, 64}_add_unless
    - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little
    endian
    - Set default CPU type to POWER8 for little endian builds

    Cleanups & features:
    - Sparse fixes/cleanups (Daniel Axtens)
    - Preserve CFAR value on SLB miss caused by access to bogus address
    (Paul Mackerras)
    - Radix MMU fixups for POWER9 (Aneesh Kumar K.V)
    - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU)
    (Simon Guo)
    - Optimise syscall entry for virtual, relocatable case (Nicholas
    Piggin)
    - Optimise MSR handling in exception handling (Nicholas Piggin)
    - Support for kexec with Radix MMU (Benjamin Herrenschmidt)
    - powernv EEH fixes (Russell Currey)
    - Suprise PCI hotplug support for powernv (Gavin Shan)
    - Endian/sparse fixes for powernv PCI (Gavin Shan)
    - Defconfig updates (Anton Blanchard)
    - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh)
    - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat)
    - cxl: replace loop with for_each_child_of_node(), remove unneeded
    of_node_put() (Andrew Donnellan)
    - Fix HV facility unavailable to use correct handler (Nicholas
    Piggin)
    - Remove unnecessary syscall trampoline (Nicholas Piggin)
    - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael
    Ellerman)
    - Quieten EEH message when no adapters are found (Anton Blanchard)
    - powernv: Add PHB register dump debugfs handle (Russell Currey)
    - Use kprobe blacklist for exception handlers & asm functions
    (Nicholas Piggin)
    - Document the syscall ABI (Nicholas Piggin)
    - MAINTAINERS: Update cxl maintainers (Michael Neuling)
    - powerpc: Remove all usages of NO_IRQ (Michael Ellerman)

    Minor cleanups:
    - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur,
    Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng,
    Simon Guo"

    * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
    powerpc/bpf: Add support for bpf constant blinding
    powerpc/bpf: Implement support for tail calls
    powerpc/bpf: Introduce accessors for using the tmp local stack space
    powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n
    powerpc: tm: Enable transactional memory (TM) lazily for userspace
    powerpc/tm: Add TM Unavailable Exception
    powerpc: Remove do_load_up_transact_{fpu,altivec}
    powerpc: tm: Rename transct_(*) to ck(\1)_state
    powerpc: tm: Always use fp_state and vr_state to store live registers
    selftests/powerpc: Add checks for transactional VSXs in signal contexts
    selftests/powerpc: Add checks for transactional VMXs in signal contexts
    selftests/powerpc: Add checks for transactional FPUs in signal contexts
    selftests/powerpc: Add checks for transactional GPRs in signal contexts
    selftests/powerpc: Check that signals always get delivered
    selftests/powerpc: Add TM tcheck helpers in C
    selftests/powerpc: Allow tests to extend their kill timeout
    selftests/powerpc: Introduce GPR asm helper header file
    selftests/powerpc: Move VMX stack frame macros to header file
    selftests/powerpc: Rework FPU stack placement macros and move to header file
    selftests/powerpc: Check for VSX preservation across userspace preemption
    ...

    Linus Torvalds
     

20 Sep, 2016

1 commit

  • NO_IRQ has been == 0 on powerpc for just over ten years (since commit
    0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change
    platforms to use it")). It's also 0 on most other arches.

    Although it's fairly harmless, every now and then it causes confusion
    when a driver is built on powerpc and another arch which doesn't define
    NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
    some of which are to work around that problem.

    So we'd like to remove it. This is fairly trivial in the arch code, we
    just convert:

    if (irq == NO_IRQ) to if (!irq)
    if (irq != NO_IRQ) to if (irq)
    irq = NO_IRQ; to irq = 0;
    return NO_IRQ; to return 0;

    And a few other odd cases as well.

    At least for now we keep the #define NO_IRQ, because there is driver
    code that uses NO_IRQ and the fixes to remove those will go via other
    trees.

    Note we also change some occurrences in PPC sound drivers, drivers/ps3,
    and drivers/macintosh.

    Signed-off-by: Michael Ellerman

    Michael Ellerman
     

08 Sep, 2016

1 commit


25 Aug, 2016

1 commit


05 Aug, 2015

1 commit

  • Update the aoa-soundbus framework to use dev_pm_ops rather than the
    deprecated legacy suspend and resume callbacks.

    Since there isn't anything special to do at the bus level the bus driver
    does not have to implement any callbacks. The device driver core will
    automatically pick up and execute the device's PM ops.

    As there is only a single aoa-soundbus driver implementing suspend and
    resume, update both the core and driver at the same time to avoid
    unnecessary code churn.

    Signed-off-by: Lars-Peter Clausen
    Signed-off-by: Takashi Iwai

    Lars-Peter Clausen
     

10 Jul, 2015

1 commit


13 Jun, 2015

1 commit


19 Mar, 2015

1 commit


04 Feb, 2015

1 commit


02 Feb, 2015

1 commit

  • Like previous patches, at this time we embed the struct device into
    PCM object. However, this needs a bit more caution: struct snd_pcm
    doesn't own one device but two, for both playback and capture! Thus
    not struct snd_pcm but struct snd_pcm_str object contains the device.

    Along with this change, pcm->dev field is dropped for avoiding
    confusion. It was meant to point to a non-standard parent. But,
    since now we can touch each struct device directly, we can manipulate
    the parent field easily there, too.

    Reviewed-by: Jaroslav Kysela
    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

28 Jan, 2015

1 commit


04 Jan, 2015

2 commits


03 Dec, 2014

1 commit


21 Oct, 2014

1 commit