Eric Lee / smarc-fsl-linux-kernel

15 Aug, 2020

1 commit

19 Jun, 2019

1 commit

  • d2912cb15   treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 ... Browse Code »

    Based on 2 normalized pattern(s):

    this program is free software you can redistribute it and or modify
    it under the terms of the gnu general public license version 2 as
    published by the free software foundation

    this program is free software you can redistribute it and or modify
    it under the terms of the gnu general public license version 2 as
    published by the free software foundation #

    extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

    has been chosen to replace the boilerplate/reference in 4122 file(s).

    Signed-off-by: Thomas Gleixner
    Reviewed-by: Enrico Weigelt
    Reviewed-by: Kate Stewart
    Reviewed-by: Allison Randal
    Cc: linux-spdx@vger.kernel.org
    Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
    Signed-off-by: Greg Kroah-Hartman

    Thomas Gleixner
     

04 Jan, 2019

1 commit

  • 96d4f267e   Remove 'type' argument from access_ok() function ... Browse Code »

    Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
    of the user address range verification function since we got rid of the
    old racy i386-only code to walk page tables by hand.

    It existed because the original 80386 would not honor the write protect
    bit when in kernel mode, so you had to do COW by hand before doing any
    user access. But we haven't supported that in a long time, and these
    days the 'type' argument is a purely historical artifact.

    A discussion about extending 'user_access_begin()' to do the range
    checking resulted this patch, because there is no way we're going to
    move the old VERIFY_xyz interface to that model. And it's best done at
    the end of the merge window when I've done most of my merges, so let's
    just get this done once and for all.

    This patch was mostly done with a sed-script, with manual fix-ups for
    the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

    There were a couple of notable cases:

    - csky still had the old "verify_area()" name as an alias.

    - the iter_iov code had magical hardcoded knowledge of the actual
    values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
    really used it)

    - microblaze used the type argument for a debug printout

    but other than those oddities this should be a total no-op patch.

    I tried to fix up all architectures, did fairly extensive grepping for
    access_ok() uses, and the changes are trivial, but I may have missed
    something. Any missed conversion should be trivially fixable, though.

    Signed-off-by: Linus Torvalds

    Linus Torvalds
     

02 Nov, 2017

1 commit

  • b24413180   License cleanup: add SPDX GPL-2.0 license identifier to files with no license ... Browse Code »

    Many source files in the tree are missing licensing information, which
    makes it harder for compliance tools to determine the correct license.

    By default all files without license information are under the default
    license of the kernel, which is GPL version 2.

    Update the files which contain no license information with the 'GPL-2.0'
    SPDX license identifier. The SPDX identifier is a legally binding
    shorthand, which can be used instead of the full boiler plate text.

    This patch is based on work done by Thomas Gleixner and Kate Stewart and
    Philippe Ombredanne.

    How this work was done:

    Patches were generated and checked against linux-4.14-rc6 for a subset of
    the use cases:
    - file had no licensing information it it.
    - file was a */uapi/* one with no licensing information in it,
    - file was a */uapi/* one with existing licensing information,

    Further patches will be generated in subsequent months to fix up cases
    where non-standard license headers were used, and references to license
    had to be inferred by heuristics based on keywords.

    The analysis to determine which SPDX License Identifier to be applied to
    a file was done in a spreadsheet of side by side results from of the
    output of two independent scanners (ScanCode & Windriver) producing SPDX
    tag:value files created by Philippe Ombredanne. Philippe prepared the
    base worksheet, and did an initial spot review of a few 1000 files.

    The 4.13 kernel was the starting point of the analysis with 60,537 files
    assessed. Kate Stewart did a file by file comparison of the scanner
    results in the spreadsheet to determine which SPDX license identifier(s)
    to be applied to the file. She confirmed any determination that was not
    immediately clear with lawyers working with the Linux Foundation.

    Criteria used to select files for SPDX license identifier tagging was:
    - Files considered eligible had to be source code files.
    - Make and config files were included as candidates if they contained >5
    lines of source
    - File already had some variant of a license header in it (even if
    Reviewed-by: Philippe Ombredanne
    Reviewed-by: Thomas Gleixner
    Signed-off-by: Greg Kroah-Hartman

    Greg Kroah-Hartman
     

25 Dec, 2016

1 commit

23 Dec, 2011

1 commit

  • 55205c916   oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue ... Browse Code »
    1

    This change fixes a linking problem, which happens if oprofile
    is selected to be compiled as built-in:

    `oprofile_arch_exit' referenced in section `.init.text' of
    arch/arm/oprofile/built-in.o: defined in discarded section
    `.exit.text' of arch/arm/oprofile/built-in.o

    The problem is appeared after commit 87121ca504, which
    introduced oprofile_arch_exit() calls from __init function. Note
    that the aforementioned commit has been backported to stable
    branches, and the problem is known to be reproduced at least
    with 3.0.13 and 3.1.5 kernels.

    Signed-off-by: Vladimir Zapolskiy
    Signed-off-by: Robert Richter
    Cc: Will Deacon
    Cc: oprofile-list
    Cc:
    Link: http://lkml.kernel.org/r/20111222151540.GB16765@erda.amd.com
    Signed-off-by: Ingo Molnar

    Vladimir Zapolskiy
     

23 May, 2011

1 commit

27 Oct, 2010

3 commits

11 Oct, 2010

1 commit

  • 86c8c0479   sh: oprofile: Use perf-events oprofile backend ... Browse Code »

    Now that we've got a generic perf-events based oprofile backend we might
    as well make use of it seeing as SH doesn't do anything special with its
    oprofile backend. Also introduce a new CONFIG_HW_PERF_EVENTS symbol so
    that we can fallback to using the timer interrupt for oprofile if the
    CPU doesn't support perf events.

    Also, to avoid a section mismatch warning we need to annotate
    oprofile_arch_exit() with an __exit marker.

    Signed-off-by: Matt Fleming
    Acked-by: Paul Mundt
    Signed-off-by: Robert Richter

    Matt Fleming
     

05 Nov, 2009

2 commits

  • e9c4148fd   sh: oprofile: Fix up count size mismatch for common impl. ... Browse Code »

    This reduces the 'count' size in the common support structure to 32-bits
    so that it matches up with what oprofile is expecting. The SH7750 code
    was using a nasty oprofilefs hack to expose the 48-bit counter, although
    no other implementations were. Now that the offending driver has been
    killed off, it's possible to restore some semblance of sanity.

    Signed-off-by: Paul Mundt

    Paul Mundt
     
  • 093aed193   sh: oprofile: Kill off bitrotted SH7750 driver. ... Browse Code »

    This kills off the old SH7750 oprofile driver, preferring perf instead.
    As this driver has a number of bugs that no one seems to have noticed,
    it's safe to kill this off now rather than providing an extended
    transition period.

    The old oprofile framework is still kept in place for now, primarily to
    give out-of-tree drivers a chance to transition off. But this too will be
    killed off in short order.

    Signed-off-by: Paul Mundt

    Paul Mundt
     

14 Aug, 2009

1 commit

13 Aug, 2009

2 commits

  • 0eff9f66d   sh: Use the new stack unwinder API ... Browse Code »

    Instead of implementing our own stack unwinder via dump_trace() we
    should use the new stack unwinder API because it is more modular. This
    change allows us to decouple the interface for generating stacktraces
    from the implementation of a stack unwinder.

    Signed-off-by: Matt Fleming
    Signed-off-by: Paul Mundt

    Matt Fleming
     
  • 4e14dfc72   sh: Use the generalized stacktrace ops ... Browse Code »

    Copy the stacktrace ops code from x86 and provide a central function for
    use by functions that need to dump a callstack.

    Signed-off-by: Matt Fleming
    Signed-off-by: Paul Mundt

    Matt Fleming
     

16 Apr, 2009

1 commit

03 Mar, 2009

1 commit

  • 55ba99eb2   sh: Add support for SH7786 CPU subtype. ... Browse Code »

    This adds preliminary support for the SH7786 CPU subtype.

    While this is a dual-core CPU, only UP is supported for now. L2 cache
    support is likewise not yet implemented.

    More information on this particular CPU subtype is available at:

    http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/

    Signed-off-by: Kuninori Morimoto
    Signed-off-by: Paul Mundt

    Kuninori Morimoto
     

22 Dec, 2008

5 commits

27 Oct, 2008

1 commit

07 Nov, 2007

1 commit

30 Oct, 2007

1 commit

20 Oct, 2007

1 commit

  • 09cadedbd   Combine instrumentation menus in kernel/Kconfig.instrumentation ... Browse Code »

    Quoting Randy:

    "It seems sad that this patch sources Kconfig.marker, a 7-line file,
    20-something times. Yes, you (we) don't want to put those 7 lines into
    20-something different files, so sourcing is the right thing.

    However, what you did for avr32 seems more on the right track to me: make
    _one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES,
    and MARKERS and then use (source) that in all of the arches."

    Signed-off-by: Mathieu Desnoyers
    Acked-by: Randy Dunlap
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Mathieu Desnoyers
     

13 Feb, 2007

2 commits

09 Dec, 2006

1 commit

27 Sep, 2006

1 commit

27 Jun, 2006

1 commit

  • 0c6856f70   [PATCH] oprofile: Fix unnecessary cleverness ... Browse Code »

    nmi_create_files() in arch/i386/oprofile/nmi_int.c depends on
    model->num_counters (number of performance counters) being less than 10.
    While this is currently the case, it's too clever by half.

    Other archs aren't quite as clever: they assume 100. I suggest to
    normalize them all to 1000.

    Cc: Philippe Elie
    Cc: John Levon
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Markus Armbruster
     

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds