23 Aug, 2016
1 commit
-
With recent topology changes in alsa-lib, driver data for
modules can now be passed in topology conf file using tuples.This patch defines vendor specific tokens to describe private
data with tuples.The allowed token types are UUID, string, bool, byte, short and
word. These tokens will be referenced by the vendor tuples in
the conf file.In the topology conf file, multiple data blocks can be defined
for a widget which can be either tuple vendor array or blob. So,
each data block will be preceded by a descriptor to identify
size and type of block. These descriptors will be token
value pairs.Tokens for module_id and loadable flag are not defined as these
are read from the DSP FW manifest.Signed-off-by: Shreyas NC
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown
18 Aug, 2016
1 commit
-
trivial fix to spelling mistake in dev_err message and reformat code
to avoid being over 80 chars wide per lineSigned-off-by: Colin Ian King
Signed-off-by: Mark Brown
17 Aug, 2016
2 commits
-
Baytrail-CR platform needing SSP0-AIF1 routing
Also fix SSP0 while we are at it.Suggested-by: Andrei Lavreniyuk
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
spurious __initconst copy/pasted from other drivers
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown
15 Aug, 2016
17 commits
-
use dev_info to provide better support for autodetection
and DMI-based quirks, no functional changesSigned-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Add DMI-based quirk, routing from SSP0 to AIF1 is not very
usualSuggested-by: Antonio Ospite
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
I2S MCLK has been routed to LSE connector on the MinnowBoard
starting with HW version 3. Older versions of the board do
not have MCLK wired.Add dmi quirk to disable MCLK for MinnowBoard MAX (v2).
Signed-off-by: Irina Tirdea
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined.
By default always enable the 19.2 MHz PLL.Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Irina Tirdea
Signed-off-by: Mark Brown -
Some platforms have the analog mic connected to IN3,
add route accordinglySigned-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Auto routing based on Baytrail/Baytrail-CR detection
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Allow for all possible combinations of SSP0,SSP2, AIF1, AIF2
combination (only one at a time)Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Add quirk to model routing on Baytrail-CR devices
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Existing code used SSP2, make selection of SSP id
dependent on port name. This is required when the
machine driver uses non-default settingsSigned-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
The Atom DPCM driver only allowed for the SSP2 interface, add
definitions for modem/SSP0.These definitions might be used to route audio to a codec
connected to SSP0 (instead of a modem in traditional usages),
but there is a restriction to 2ch I2S. SSP2 is capable of
handling up to 4 slot TDM.Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
BYT-CR needs special handling to deal with BIOS issues.
For some reason the IPC interrupt index is also modified from
the Baytrail-T reference.Use PUNIT BIOS config bits to infer platform details.
Assume regular Baytrail configs if status is incorrect or
CONFIG_IOSF_MBI is not enabled.SSP0 routing issues are solved without dedicated firmware
in following patchesTested on Asus T100TA and T100TAF.
Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Some Baytrail-CR devices rely on analog mics connected with
differential pairs and not the single-ended default
Add quirk and enable it for T00TAFSigned-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Some Baytrail devices only have a mono speaker, add quirk and enable
it for T100TAF.Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
Add quirk based on DMI string matching
Also fix matching to use DMI_EXACT_MATCH otherwise T100TA and T100TAF
will be using same quirkSigned-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown -
…onie/sound into asoc-intel
-
Adding missing definitions and flags to select internal
clock source as system clock, needed for jack detection.Signed-off-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown
11 Aug, 2016
3 commits
-
Now that we have balanced loading of the topology file and split of init
and fw_init and fill module data during asoc probe.So remove it from runtime, but keep error check in case things fall apart.
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
Once topology and firmware are loaded, we can parse the manifest. Use driver
pipe and widget list to get list of all modules and populate the data.Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
snd_skl_get_module_info() takes skl_dfw_module as an argument. The users
then updates the topology data, so instead pass skl_module_cfg and let
snd_skl_get_module_info() fill that up.Signed-off-by: Dharageswari R
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown
09 Aug, 2016
6 commits
-
…git/tiwai/sound into asoc-intel
-
The HDA controller from SKL onwards support additional timestamp
reporting of the link time. The link time is read from HW
registers and converted to audio values.Signed-off-by: Guneshwor Singh
Signed-off-by: Hardik T Shah
Signed-off-by: Takashi Iwai -
Skylake onwards HDA controller supports new capabilities like
Global Time Stamping (GTS) capability. So add support to parse
these new capabilities.Signed-off-by: Guneshwor Singh
Signed-off-by: Hardik T Shah
Signed-off-by: Vinod Koul
Signed-off-by: Takashi Iwai -
Remove the unused one as we have moved it up to hdac core.
Signed-off-by: Vinod Koul
Signed-off-by: Takashi Iwai -
Now that we have the bus parse capabilities moved to core, we need to
convert users.The SKL driver and HDA extended lib needs to converted in single patch,
otherwise we regress on the functionality.Signed-off-by: Vinod Koul
Signed-off-by: Takashi Iwai -
HDA capability introduced recently are move to hdac core so that it can
be used by legacy driver as well. Also move the capability pointers up
to hdac_bus object.Signed-off-by: Vinod Koul
Signed-off-by: Takashi Iwai
08 Aug, 2016
10 commits
-
A module can be scheduled in deferent processing domains in DSP. Topology
specifies the module domain.Signed-off-by: Senthilnathan Veppur
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
While changing code notice bad comment style, so fix it up.
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
The library load is added as one of the ops in skl_dsp_fw_ops().
The manifest load gives the files to be loaded which are loaded during
the fw_init()Signed-off-by: Ramesh Babu
Signed-off-by: Kranthi G
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
sound/soc/intel/skylake/skl-topology.c:480:24-30: ERROR: application of sizeof to pointer
sizeof when applied to a pointer typed expression gives the size of
the pointerGenerated by: scripts/coccinelle/misc/noderef.cocci
Signed-off-by: Fengguang Wu
Acked-by: Vinod Koul
Signed-off-by: Mark Brown -
DSP fw can have additional firmwares as libs. These libs can be
loaded using message IPC_GLB_LOAD_LIBRARY.Signed-off-by: Ramesh Babu
Signed-off-by: Kranthi G
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
The firmware manifest contains UUIDs which needs to be passed only once.
So use the newly introduced is_first_boot flag to distinguish and parse
these only once on bxt platform as well.Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
The firmware manifest contains UUIDs which needs to be passed only once.
So use the newly introduced is_first_boot flag to distinguish and parse
these only once.Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
For additional library parsing, we need to pass firmware to be
loaded and not use the pointer in context. Also, Library module
IDs are combination of library index and module ID in manifest.So add the additional arguments of firmware and library offset to
snd_skl_parse_uuids().Signed-off-by: Senthilnathan Veppur
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
Topology manifest gives information about the libraries to be
loaded. Implement the topology manifest load callback to get
this.Signed-off-by: Kranthi G
Signed-off-by: Senthilnathan Veppur
Signed-off-by: Ramesh Babu
Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown -
The DSP instance creation also loads the firmware on DSPs. For library load
the firmware names come from topology so can't be loaded at object creation.So split the firmware load and object creation. FW load is now called after
topology init in platform probe.Signed-off-by: Vinod Koul
Signed-off-by: Mark Brown
