09 Jan, 2012
1 commit
-
Config name for spi controller driver has been modified in previous commit,
so update default config accordingly.Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu
26 Oct, 2011
1 commit
-
Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
23 Jul, 2011
1 commit
-
These flashes are always on the board, so might as well enable them by
default rather than a module.Signed-off-by: Mike Frysinger
16 Jun, 2011
1 commit
-
RTC_CLASS is changed to bool, so 'm' is invalid.
Signed-off-by: Wanlong Gao
Acked-by: Mike Frysinger
Acked-by: Wolfram Sang
Acked-by: Hans-Christian Egtvedt
Acked-by: Benjamin Herrenschmidt
Cc: Guan Xuetao
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 May, 2011
2 commits
-
These boards don't have AD1980 modules, and that device is deprecated,
so don't bother building it up by default anymore.Signed-off-by: Mike Frysinger
-
Build the sound pieces that the board actually has into the kernel, and
punt older devices that we discourage.Signed-off-by: Mike Frysinger
26 Mar, 2011
1 commit
-
The default value for misc devices was changed from Y to N which
causes problems for mini defconfigs that were relying on this
defaulting to Y. So update all of the defconfigs accordingly.Reported-by: Uwe Kleine-König
Signed-off-by: Mike Frysinger
18 Mar, 2011
1 commit
-
We use these insns when testing, so enable them by default for all
of our development boards.Signed-off-by: Mike Frysinger
21 Jan, 2011
1 commit
-
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.Reviewed-by: Ingo Molnar
Acked-by: David Woodhouse
Signed-off-by: David Rientjes
Cc: Greg KH
Cc: "David S. Miller"
Cc: Jens Axboe
Cc: Arnd Bergmann
Cc: Robin Holt
Cc:
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
10 Jan, 2011
2 commits
-
Signed-off-by: Andreas Schallenberg
Signed-off-by: Mike Frysinger -
Since the SMP code paths tend to compile fail a lot, start a SMP defconfig
so our nightly build tools will automatically test it.Signed-off-by: Mike Frysinger
25 Oct, 2010
1 commit
-
- enable pm for ADI boards
- drop security option as no one uses it
- enable uninitialized mmap for everyone
- disable wireless by default as no one uses it
- disable cfq io sched as noop is fineSigned-off-by: Mike Frysinger
23 Oct, 2010
1 commit
-
Signed-off-by: Ashish Gupta
Signed-off-by: Mike Frysinger
22 Oct, 2010
1 commit
-
Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
15 Aug, 2010
1 commit
-
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.Signed-off-by: Sam Ravnborg
07 Aug, 2010
1 commit
-
Signed-off-by: Mike Frysinger
09 Mar, 2010
3 commits
-
Signed-off-by: Harald Krapfenbauer
Signed-off-by: Mike Frysinger -
Signed-off-by: Sonic Zhang
Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger -
Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
15 Dec, 2009
2 commits
-
Signed-off-by: Valentin Yakovenkov
Signed-off-by: Mike Frysinger -
Signed-off-by: Michael Hennerich
Signed-off-by: Cliff Cai
Signed-off-by: Yi Li
Signed-off-by: Harald Krapfenbauer
Signed-off-by: Graf Yang
Signed-off-by: Mike Frysinger
17 Sep, 2009
1 commit
-
The default async timings are a little too fast for the parallel flash
that is attached by default to the async banks. So slow things down a bit
so accessing the hardware is stable.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
23 Jun, 2009
1 commit
-
Signed-off-by: Mike Frysinger
12 Jun, 2009
1 commit
-
Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
28 Mar, 2009
1 commit
-
Signed-off-by: Sonic Zhang
Signed-off-by: Bryan Wu
06 Mar, 2009
1 commit
-
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
05 Mar, 2009
1 commit
-
Signed-off-by: Graf Yang
Signed-off-by: Bryan Wu
04 Mar, 2009
1 commit
-
Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu
02 Mar, 2009
1 commit
-
Signed-off-by: Sonic Zhang
Signed-off-by: Bryan Wu
04 Feb, 2009
3 commits
-
Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu -
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
Signed-off-by: Sonic Zhang
Signed-off-by: Bryan Wu
27 Jan, 2009
1 commit
-
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.Signed-off-by: Jean Delvare
Acked-by: Wolfram Sang
Cc: David Brownell
07 Jan, 2009
5 commits
-
Signed-off-by: Mike Frysinger
Signed-off-by: Sonic Zhang
Signed-off-by: Bryan Wu -
[Mike Frysinger :
- handle bf531/bf532/bf534/bf536 variants in ipipe.h
- cleanup IPIPE logic for bfin_set_irq_handler()
- cleanup ipipe asm code a bit and add missing ENDPROC()
- simplify IPIPE code in trap_c
- unify some of the IPIPE code and fix style
- simplify DO_IRQ_L1 handling with ipipe code
- revert IRQ_SW_INT# addition from ipipe merge
- remove duplicate get_{c,s}clk() prototypes
]Signed-off-by: Yi Li
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
All slaves I'm aware of should support at least 100kHz
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
Turn to use the mmc_spi driver in mainline kernel.
Signed-off-by: Yi Li
Signed-off-by: Bryan Wu
18 Nov, 2008
2 commits
-
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
- do not bother generating deprecated /sys files by default now since
mdev does not need it
- Don't built-in char sport driver and build it as a module in defconfig
- disable CONFIG_DEVKMEM by default
- enable spi flash driver on boards that have one
- switch config to the NAND platfrom driver rather than the bfin async one
- do not make BFIN_DMA_5XX optional since a large portion of our code relies
on dma functions existingSigned-off-by: Mike Frysinger
Signed-off-by: Bryan Wu