09 Jan, 2012
1 commit
-
Macro name for spi controller driver has been modified, so update default
board file accordingly.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
14 Nov, 2011
2 commits
-
Commit 8dc7a9c84 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declarationThis patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: Lars-Peter Clausen
Acked-by: Mike Frysinger
Signed-off-by: Bob Liu -
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bob Liu
01 Nov, 2011
1 commit
-
These particular files were just assuming that module.h was
somehow in the include paths. Give them the more minimalist
header file explicitly.Signed-off-by: Paul Gortmaker
23 Jul, 2011
4 commits
-
The pcm driver name has been changed, but the device name has not.
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant. So punt
those parts.Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
29 May, 2011
2 commits
-
The bf52x/bf54x have the incorrect addresses for USB_EP_NI7_RXINTERVAL
and USB_EP_NI7_TXCOUNT, so adjust those.Further, the bf54x header puts the USB defines in the wrong place, so
shuffle them back to the right grouping.Signed-off-by: Mike Frysinger
-
Now that the serial code has been unified in bfin_serial.h, and the
Blackfin UART driver pushed its resources to the boards files, we
don't need these headers anymore.Signed-off-by: Mike Frysinger
25 May, 2011
5 commits
-
Now that the Blackfin machine drivers have been updated to the
multicomponent support, update the resources to match. The pin
settings are now a board issue and removed from the driver.Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
-
These files had a lot of whitespace damage, mostly due to copying and
pasting original files that had damage.The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so
punt them all.Signed-off-by: Mike Frysinger
-
Start a new common IRQ header and move all of the CEC pieces there. This
lets the individual part headers worry just about its SIC defines.Signed-off-by: Mike Frysinger
18 Mar, 2011
1 commit
-
No code uses these, and the short define names are polluting the global
namespace where they collide with things like common irq files. So just
punt the damned things. If in the future we need HDMA support, we can
make a standalone header for these things.Signed-off-by: Mike Frysinger
10 Jan, 2011
13 commits
-
Signed-off-by: Mike Frysinger
-
The SPORT/UART driver doesn't use the secondary channel pins, so don't
try and request them thus keeping other drivers from using them.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
platfrom -> platform
This changes a struct name. The related code is conditionally
compiled and won't work because the include file linux/gpio-decoder.h
is missing, so removing this code would be an even better solution.If the missing include file is added, it must fix the spelling, too.
Signed-off-by: Stefan Weil
Signed-off-by: Mike Frysinger -
Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
These were only included because of the irq handling of the PLL funcs,
and those PLL funcs have been moved out into their own header now.Signed-off-by: Mike Frysinger
-
The defBF512.h header exists only to include defBF51x_base.h, and it is
the only place where defBF51x_base.h is included. So move the contents
of the defBF51x_base.h header into the defBF512.h header.Same situation for the other def/cdef pairs.
Signed-off-by: Mike Frysinger
-
The main asm/blackfin.h header will pull in mach/blackfin.h to get
all the fun Blackfin defines. So having any of the sub-mach headers
trying to include asm/blackfin.h makes no sense -- punt it.The mach/blackfin.h header takes care of including the part-specific
def headers which in turn will include any other needed def file.
Similarly, it takes care of pulling in the part-specific cdef header.
So move this logic out of the blackfin.h when necessary.Further, make sure the cdef headers do not waste time including the
def headers again.Since all parts need the common def/cdef headers, move this logic
out of the part-specific headers and into the mach/blackfin.h file.Finally, we need to split the BF539 def header since the BF538 does
not have MXVR and we don't want to expose those MMRs.So now all parts should have the same behavior:
mach/blackfin.h
asm/def_LPBlackfin.h
part-specific def.h
if ! asm
asm/cdef_LPBlackfin.h
part-specific cdef.h
And the sub def/cdef headers only tail into what they need.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
-
The array of pointers is never written, so constify it.
Signed-off-by: Mike Frysinger
-
Use the same naming convention for DMA traffic MMRs (most were legacy
anyways) so we can avoid useless ifdef trees.Same goes for MDMA names -- this actually allows us to undo a bunch of
ifdef redirects that existed for this purpose alone.Signed-off-by: Mike Frysinger
-
Each Blackfin port has been duplicating UART structures and defines when
there really is no need for it. So start a new bfin_serial.h header to
unify all these pieces and give ourselves a fresh start.Signed-off-by: Mike Frysinger
-
In order to not touch the driver file for different xtal usage,
push the clkin value to board file and calculate the register
value instead of hardcoding it.Signed-off-by: Bob Liu
Signed-off-by: Mike Frysinger
10 Dec, 2010
2 commits
-
Just adding its own platform_driver, not really
using it yet.Later patches will come to split power management
code from musb_core and move it completely to HW
glue layer.Signed-off-by: Felipe Balbi
-
change all ocurrences of musb_hdrc to musb-hdrc.
We will call glue layer drivers musb-,
so in order to keep things somewhat standard, let's
change the underscore into a dash.Signed-off-by: Felipe Balbi
01 Dec, 2010
1 commit
-
Soon resource data will get automatically
populated from a set of autogenerated data
from TI's hardware database for the OMAP
platform.Such database, might not have resources at
the expected order by the current drivers.While we could hack in some exceptions to
that tool to generate resources in a specific
order, it seems less fragile to use the
resource name instead. That way, no matter
what order the resources are generated, the
driver still work.Modified the OMAP, Blackfin and Davinci
architecture files to add the name of the IRQs
in the resource structures and musb driver to
use the platform_get_irq_byname() api to get
the device and dma irq numbers instead of using
the index.Cc: Tony Lindgren
Acked-by: Kevin Hilman
Acked-by: Mike Frysinger
Signed-off-by: Hema HK
Signed-off-by: Felipe Balbi
25 Oct, 2010
2 commits
-
Move all the pin settings out of the Kconfig and into the platform
resources (MII vs RMII). This clean up also lets us push out the
phy settings so that board porters may control the layout.Signed-off-by: Sonic Zhang
Acked-by: David S. Miller
Signed-off-by: Mike Frysinger -
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
Update broken web addresses in arch directory.
Update broken web addresses in the kernel.
Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
Revert "Fix typo: configuation => configuration" partially
ida: document IDA_BITMAP_LONGS calculation
ext2: fix a typo on comment in ext2/inode.c
drivers/scsi: Remove unnecessary casts of private_data
drivers/s390: Remove unnecessary casts of private_data
net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
drivers/infiniband: Remove unnecessary casts of private_data
drivers/gpu/drm: Remove unnecessary casts of private_data
kernel/pm_qos_params.c: Remove unnecessary casts of private_data
fs/ecryptfs: Remove unnecessary casts of private_data
fs/seq_file.c: Remove unnecessary casts of private_data
arm: uengine.c: remove C99 comments
arm: scoop.c: remove C99 comments
Fix typo configue => configure in comments
Fix typo: configuation => configuration
Fix typo interrest[ing|ed] => interest[ing|ed]
Fix various typos of valid in comments
...Fix up trivial conflicts in:
drivers/char/ipmi/ipmi_si_intf.c
drivers/usb/gadget/rndis.c
net/irda/irnet/irnet_ppp.c
23 Oct, 2010
2 commits
-
The RX/TX address is always the same regardless of the size of the access.
That means there is no dedicated "16bit" or "32bit" MMR. Trying to use
these currently leads to compile errors. So change everything to use the
right MMR define.Signed-off-by: Bob Liu
Signed-off-by: Mike Frysinger -
Signed-off-by: Ashish Gupta
Signed-off-by: Mike Frysinger
22 Oct, 2010
4 commits
-
Since these boards can boot out of NAND, make sure we give u-boot its
own partition by default to avoid clobbering it.Signed-off-by: Mike Frysinger
-
Signed-off-by: steven miao
Signed-off-by: Mike Frysinger -
Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger -
Make sure we use the right Kconfig names and platform strings.
Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger
