Eric Lee / smarc-fsl-linux-kernel

11 Dec, 2011

1 commit

09 Nov, 2011

1 commit

31 Jan, 2011

1 commit

  • e53f276be   m68k: Switch do_timer() to xtime_update() ... Browse Code »

    xtime_update() properly takes the xtime_lock

    Signed-off-by: Torben Hohn
    Cc: Sam Creasey
    Cc: Peter Zijlstra
    Cc: johnstul@us.ibm.com
    Cc: Roman Zippel
    Cc: hch@infradead.org
    Cc: yong.zhang0@gmail.com
    Cc: Geert Uytterhoeven
    Cc: Greg Ungerer
    LKML-Reference:
    Signed-off-by: Thomas Gleixner

    Torben Hohn
     

15 Oct, 2010

1 commit

  • 6038f373a   llseek: automatically add .llseek fop ... Browse Code »

    All file_operations should get a .llseek operation so we can make
    nonseekable_open the default for future file operations without a
    .llseek pointer.

    The three cases that we can automatically detect are no_llseek, seq_lseek
    and default_llseek. For cases where we can we can automatically prove that
    the file offset is always ignored, we use noop_llseek, which maintains
    the current behavior of not returning an error from a seek.

    New drivers should normally not use noop_llseek but instead use no_llseek
    and call nonseekable_open at open time. Existing drivers can be converted
    to do the same when the maintainer knows for certain that no user code
    relies on calling seek on the device file.

    The generated code is often incorrectly indented and right now contains
    comments that clarify for each added line why a specific variant was
    chosen. In the version that gets submitted upstream, the comments will
    be gone and I will manually fix the indentation, because there does not
    seem to be a way to do that using coccinelle.

    Some amount of new code is currently sitting in linux-next that should get
    the same modifications, which I will do at the end of the merge window.

    Many thanks to Julia Lawall for helping me learn to write a semantic
    patch that does all this.

    ===== begin semantic patch =====
    // This adds an llseek= method to all file operations,
    // as a preparation for making no_llseek the default.
    //
    // The rules are
    // - use no_llseek explicitly if we do nonseekable_open
    // - use seq_lseek for sequential files
    // - use default_llseek if we know we access f_pos
    // - use noop_llseek if we know we don't access f_pos,
    // but we still want to allow users to call lseek
    //
    @ open1 exists @
    identifier nested_open;
    @@
    nested_open(...)
    {

    }

    @ open exists@
    identifier open_f;
    identifier i, f;
    identifier open1.nested_open;
    @@
    int open_f(struct inode *i, struct file *f)
    {

    }

    @ read disable optional_qualifier exists @
    identifier read_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    expression E;
    identifier func;
    @@
    ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
    {

    }

    @ read_no_fpos disable optional_qualifier exists @
    identifier read_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    @@
    ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
    {
    ... when != off
    }

    @ write @
    identifier write_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    expression E;
    identifier func;
    @@
    ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
    {

    }

    @ write_no_fpos @
    identifier write_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    @@
    ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
    {
    ... when != off
    }

    @ fops0 @
    identifier fops;
    @@
    struct file_operations fops = {
    ...
    };

    @ has_llseek depends on fops0 @
    identifier fops0.fops;
    identifier llseek_f;
    @@
    struct file_operations fops = {
    ...
    .llseek = llseek_f,
    ...
    };

    @ has_read depends on fops0 @
    identifier fops0.fops;
    identifier read_f;
    @@
    struct file_operations fops = {
    ...
    .read = read_f,
    ...
    };

    @ has_write depends on fops0 @
    identifier fops0.fops;
    identifier write_f;
    @@
    struct file_operations fops = {
    ...
    .write = write_f,
    ...
    };

    @ has_open depends on fops0 @
    identifier fops0.fops;
    identifier open_f;
    @@
    struct file_operations fops = {
    ...
    .open = open_f,
    ...
    };

    // use no_llseek if we call nonseekable_open
    ////////////////////////////////////////////
    @ nonseekable1 depends on !has_llseek && has_open @
    identifier fops0.fops;
    identifier nso ~= "nonseekable_open";
    @@
    struct file_operations fops = {
    ... .open = nso, ...
    +.llseek = no_llseek, /* nonseekable */
    };

    @ nonseekable2 depends on !has_llseek @
    identifier fops0.fops;
    identifier open.open_f;
    @@
    struct file_operations fops = {
    ... .open = open_f, ...
    +.llseek = no_llseek, /* open uses nonseekable */
    };

    // use seq_lseek for sequential files
    /////////////////////////////////////
    @ seq depends on !has_llseek @
    identifier fops0.fops;
    identifier sr ~= "seq_read";
    @@
    struct file_operations fops = {
    ... .read = sr, ...
    +.llseek = seq_lseek, /* we have seq_read */
    };

    // use default_llseek if there is a readdir
    ///////////////////////////////////////////
    @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier readdir_e;
    @@
    // any other fop is used that changes pos
    struct file_operations fops = {
    ... .readdir = readdir_e, ...
    +.llseek = default_llseek, /* readdir is present */
    };

    // use default_llseek if at least one of read/write touches f_pos
    /////////////////////////////////////////////////////////////////
    @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read.read_f;
    @@
    // read fops use offset
    struct file_operations fops = {
    ... .read = read_f, ...
    +.llseek = default_llseek, /* read accesses f_pos */
    };

    @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier write.write_f;
    @@
    // write fops use offset
    struct file_operations fops = {
    ... .write = write_f, ...
    + .llseek = default_llseek, /* write accesses f_pos */
    };

    // Use noop_llseek if neither read nor write accesses f_pos
    ///////////////////////////////////////////////////////////

    @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read_no_fpos.read_f;
    identifier write_no_fpos.write_f;
    @@
    // write fops use offset
    struct file_operations fops = {
    ...
    .write = write_f,
    .read = read_f,
    ...
    +.llseek = noop_llseek, /* read and write both use no f_pos */
    };

    @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier write_no_fpos.write_f;
    @@
    struct file_operations fops = {
    ... .write = write_f, ...
    +.llseek = noop_llseek, /* write uses no f_pos */
    };

    @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read_no_fpos.read_f;
    @@
    struct file_operations fops = {
    ... .read = read_f, ...
    +.llseek = noop_llseek, /* read uses no f_pos */
    };

    @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    @@
    struct file_operations fops = {
    ...
    +.llseek = noop_llseek, /* no read or write fn */
    };
    ===== End semantic patch =====

    Signed-off-by: Arnd Bergmann
    Cc: Julia Lawall
    Cc: Christoph Hellwig

    Arnd Bergmann
     

18 May, 2010

1 commit

  • b1f3bb494   m68k: Remove BKL from rtc implementations ... Browse Code »

    m68k does not support SMP. The access to the rtc is already serialized
    with local_irq_save/restore which is sufficient on UP.

    The open() protection in arch/m68k/mvme16x/rtc.c is not pretty but
    sufficient on UP and safe w/o the BKL.

    open() in arch/m68k/bvme6000/rtc.c can do with the same atomic logic
    as arch/m68k/mvme16x/rtc.c

    Signed-off-by: Thomas Gleixner
    Signed-off-by: Geert Uytterhoeven

    Thomas Gleixner
     

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

13 Jan, 2009

1 commit

23 Oct, 2008

1 commit

15 Oct, 2008

1 commit

  • 5b1d5f953   m68k: use bcd2bin/bin2bcd ... Browse Code »

    This patch changes m68k to use the new bcd2bin/bin2bcd functions instead
    of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

    It also remove local bcd2bin/bin2bcd implementations
    in favor of the global ones.

    Signed-off-by: Adrian Bunk
    Signed-off-by: Geert Uytterhoeven
    Signed-off-by: Linus Torvalds

    Adrian Bunk
     

03 Jul, 2008

1 commit

06 Feb, 2008

1 commit

20 Jul, 2007

1 commit

09 May, 2007

1 commit

13 Feb, 2007

1 commit

  • 5dfe4c964   [PATCH] mark struct file_operations const 2 ... Browse Code »

    Many struct file_operations in the kernel can be "const". Marking them const
    moves these to the .rodata section, which avoids false sharing with potential
    dirty data. In addition it'll catch accidental writes at compile time to
    these shared resources.

    [akpm@osdl.org: sparc64 fix]
    Signed-off-by: Arjan van de Ven
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Arjan van de Ven
     

09 Oct, 2006

1 commit

  • 40220c1a1   IRQ: Use the new typedef for interrupt handler function pointers ... Browse Code »

    Use the new typedef for interrupt handler function pointers rather than
    actually spelling out the full thing each time. This was scripted with the
    following small shell script:

    #!/bin/sh
    egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* |
    while read i
    do
    echo $i
    perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
    done

    Signed-Off-By: David Howells

    David Howells
     

08 Oct, 2006

1 commit

  • 2850bc273   [PATCH] m68k pt_regs fixes ... Browse Code »

    m68k_handle_int() split in two functions: __m68k_handle_int() takes
    pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs
    *.

    Places where we used to call m68k_handle_int() recursively with the same
    pt_regs have simply lost the second argument, the rest is switched to
    __m68k_handle_int().

    The rest of patch is just dropping pt_regs * where needed.

    Signed-off-by: Al Viro
    Signed-off-by: Linus Torvalds

    Al Viro
     

26 Jun, 2006

2 commits

29 Mar, 2006

1 commit

13 Jan, 2006

1 commit

12 Jan, 2006

1 commit

08 Sep, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds