Eric Lee / smarc-fsl-linux-kernel

01 Apr, 2011

1 commit

  • 96b8e1a0e   bnx2x: Update firmware to 6.2.9 ... Browse Code »

    To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
    Class of Service environments. In some scenarios, traffic could stop
    on certain rings and eventually all traffic would stop.

    Signed-off-by: Dmitry Kravkov
    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Dmitry Kravkov
     

15 Mar, 2011

1 commit

  • dc187cb38   bnx2: Update firmware and version ... Browse Code »

    Update 5709 mips firmware to 6.2.1a to fix iSCSI performance
    regression. There was an unnecessary context read in the fast path
    affecting performance.

    Update bnx2 to 2.1.6.

    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Michael Chan
     

01 Jan, 2011

1 commit

  • 0268102d5   bnx2: Update firmware and version ... Browse Code »

    Update MIPS firmware to 6.2.1, with improved small packet performance
    in RSS mode, and iSCSI CID allocation bug fix on 5708.

    Update driver version to 2.0.21.

    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Michael Chan
     

12 Oct, 2010

1 commit

  • 22fa159d3   bnx2: Update firmware to 6.0.x. ... Browse Code »

    - Improved flow control and simplified interface
    - Use hardware RSS indirection table instead of the slower firmware-
    based table
    - Lower latency interrupt on 5709

    Signed-off-by: Michael Chan
    Reviewed-by: Benjamin Li
    Signed-off-by: David S. Miller

    Michael Chan
     

07 Oct, 2010

1 commit

09 Jul, 2010

1 commit

  • ecd4b48a1   IB/qib: Use request_firmware() to load SD7220 firmware ... Browse Code »

    Extract the microcode for the QLogic QLE7220 series IB HCA and use the
    kernel microcode request facility to load the microcode. This
    supports Debian Linux's requirements to separate microcode which
    doesn't have open source code available from the device driver.

    Signed-off-by: Ben Hutchings
    Signed-off-by: Roland Dreier

    Ben Hutchings
     

18 Feb, 2010

1 commit

07 Jan, 2010

1 commit

06 Nov, 2009

1 commit

30 Oct, 2009

1 commit

15 Oct, 2009

1 commit

  • b015e3d11   bnx2x: Allowing 0 as initial fairness value ... Browse Code »

    Value of zero was used to disable the fairness mechanism. Though the code
    (driver and FW) allowed changing the value at run time, it did not allow to do
    that if the mechanism was disabled to begin with.
    Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
    code to read the value from the chip at the right sequence.
    Without this fix, if the initial value was set to zero, traffic could not run on
    the interface.

    Signed-off-by: Eilon Greenstein
    Signed-off-by: David S. Miller

    Eilon Greenstein
     

05 Oct, 2009

1 commit

21 Sep, 2009

1 commit

  • 44040f107   Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 ... Browse Code »

    * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
    drm/vgaarb: add VGA arbitration support to the drm and kms.
    drm/radeon: some r420s have a CP race with the DMA engine.
    drm/radeon/r600/kms: rv670 is not DCE3
    drm/radeon/kms: r420 idle after programming GA_ENHANCE
    drm/radeon/kms: more fixes to rv770 suspend/resume path.
    drm/radeon/kms: more alignment for rv770.c with r600.c
    drm/radeon/kms: rv770 blit init called too late.
    drm/radeon/kms: move around new init path code to avoid posting at init
    drm/radeon/r600: fix some issues with suspend/resume.
    drm/radeon/kms: disable VGA rendering engine before taking over VRAM
    drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
    drm/radeon/kms: add initial connector properties
    drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
    drm/radeon/kms: don't fail if we fail to init GPU acceleration
    drm/r600/kms: fixup number of loops per blit calculation.
    drm/radeon/kms: reprogram format in set base.
    drm/radeon: avivo chips have no separate int bit for display
    drm/radeon/r600: don't do interrupts
    drm: fix _DRM_GEM addmap error message
    drm: update crtc x/y when only fb changes
    ...

    Fixed up trivial conflicts in firmware/Makefile due to network driver
    (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
    other.

    Linus Torvalds
     

15 Sep, 2009

1 commit

31 Aug, 2009

1 commit

  • 70967ab9c   radeon: Use request_firmware() ... Browse Code »

    Loosely based on a patch by
    Jaswinder Singh Rajput .

    KMS support by Dave Airlie .

    For Radeon 100- to 500-series, firmware blobs look like:
    struct {
    __be32 datah;
    __be32 datal;
    } cp_ucode[256];

    For Radeon 600-series, there are two separate firmware blobs:
    __be32 me_ucode[PM4_UCODE_SIZE * 3];
    __be32 pfp_ucode[PFP_UCODE_SIZE];

    For Radeon 700-series, likewise:
    __be32 me_ucode[R700_PM4_UCODE_SIZE];
    __be32 pfp_ucode[R700_PFP_UCODE_SIZE];

    Signed-off-by: Ben Hutchings
    Signed-off-by: Dave Airlie

    Ben Hutchings
     

27 Aug, 2009

2 commits

09 Jul, 2009

1 commit

04 Jun, 2009

1 commit

02 May, 2009

1 commit

27 Apr, 2009

1 commit

  • 94a78b79c   bnx2x: Separated FW from the source. ... Browse Code »

    >From now on FW will be downloaded from the binary file using request_firmware.

    There will be different files for every supported chip. Currently 57710 (e1) and
    57711 (e1h).

    File names have the following format: bnx2x--.fw.
    ihex versions of current FW files are submitted in the next patch.

    Each binary file has a header in the following format:

    struct bnx2x_fw_file_section {
    __be32 len;
    __be32 offset;
    }

    struct bnx2x_fw_file_hdr {
    struct bnx2x_fw_file_section init_ops;
    struct bnx2x_fw_file_section init_ops_offsets;
    struct bnx2x_fw_file_section init_data;
    struct bnx2x_fw_file_section tsem_int_table_data;
    struct bnx2x_fw_file_section tsem_pram_data;
    struct bnx2x_fw_file_section usem_int_table_data;
    struct bnx2x_fw_file_section usem_pram_data;
    struct bnx2x_fw_file_section csem_int_table_data;
    struct bnx2x_fw_file_section csem_pram_data;
    struct bnx2x_fw_file_section xsem_int_table_data;
    struct bnx2x_fw_file_section xsem_pram_data;
    struct bnx2x_fw_file_section fw_version;
    }

    Each bnx2x_fw_file_section contains the length and the offset of the appropriate
    section in the binary file. Values are stored in the big endian format.

    Data types of arrays:

    init_data __be32
    init_ops_offsets __be16
    XXsem_pram_data u8
    XXsem_int_table_data u8
    init_ops struct raw_op {
    u8 op;
    __be24 offset;
    __be32 data;
    }
    fw_version u8

    >From now boundaries of a specific initialization stage are stored in
    init_ops_offsets array instead of being defined by separate macroes. The index
    in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:

    #define BLOCK_OPS_IDX(block, stage, end) \
    (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))

    Security:

    In addition to sanity check of array boundaries bnx2x will check a FW version.
    Additional checks might be added in the future.

    Signed-off-by: Vladislav Zolotarov
    Signed-off-by: Eilon Greenstein
    Signed-off-by: David S. Miller

    Vladislav Zolotarov
     

21 Apr, 2009

1 commit

11 Apr, 2009

1 commit

  • 1e17d774d   Merge git://git.infradead.org/~dwmw2/firmware-2.6 ... Browse Code »

    * git://git.infradead.org/~dwmw2/firmware-2.6:
    qla1280: Fix off-by-some error in firmware loading.
    Add README.AddingFirmware file. Basically telling people not to.
    firmware: Remove newly-added slicoss and sxg firmware images
    firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
    ALSA: wavefront - Always use request_firmware()
    Remove fdump tool for av7110 firmware
    firmware: convert av7110 driver to request_firmware()
    Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
    Revert "fix modules_install via NFS"

    Add-add conflicts in firmware/WHENCE fixed manually

    Linus Torvalds
     

07 Apr, 2009

6 commits

  • cec20f36d   firmware: Remove newly-added slicoss and sxg firmware images ... Browse Code »

    These are available elsewhere (for example in the linux-firmware.git
    repository); they have no business being added to the kernel source
    tree.

    We are only putting stuff in the firmware/ directory of the kernel
    source when it's extracted from long-standing drivers which used to
    include it directly.

    We didn't intend to open the floodgates to including megabytes of new
    firmware which was previously being distributed separately.

    Signed-off-by: David Woodhouse

    David Woodhouse
     
  • 398920329   Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 ... Browse Code »

    * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
    b44: Use kernel DMA addresses for the kernel DMA API
    forcedeth: Fix resume from hibernation regression.
    xfrm: fix fragmentation on inter family tunnels
    ibm_newemac: Fix dangerous struct assumption
    gigaset: documentation update
    gigaset: in file ops, check for device disconnect before anything else
    bas_gigaset: use tasklet_hi_schedule for timing critical tasklets
    net/802/fddi.c: add MODULE_LICENSE
    smsc911x: remove unused #include
    axnet_cs: fix phy_id detection for bogus Asix chip.
    bnx2: Use request_firmware()
    b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()
    socket: use percpu_add() while updating sockets_in_use
    virtio_net: Set the mac config only when VIRITO_NET_F_MAC
    myri_sbus: use request_firmware
    e1000: fix loss of multicast packets
    vxge: should include tcp.h

    Conflict in firmware/WHENCE (SCSI vs net firmware)

    Linus Torvalds
     
  • 14fa86f7c   firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw ... Browse Code »

    Looks like we forgot to update WHENCE when we converted this driver.

    Signed-off-by: David Woodhouse

    David Woodhouse
     
  • 7c7cae17e   ALSA: wavefront - Always use request_firmware() ... Browse Code »

    Always use request_firmware() for loading yss225_registers image.

    Signed-off-by: Takashi Iwai
    Signed-off-by: David Woodhouse

    Takashi Iwai
     
  • 9137f05f7   firmware: convert av7110 driver to request_firmware() ... Browse Code »

    Signed-off-by: Jaswinder Singh
    Signed-off-by: David Woodhouse

    Jaswinder Singh
     
  • 22eb5aa6c   Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 ... Browse Code »

    * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (74 commits)
    [SCSI] sg: fix q->queue_lock on scsi_error_handler path
    [SCSI] replace __inline with inline
    [SCSI] a2091: make 2 functions static
    [SCSI] a3000: make 2 functions static
    [SCSI] ses: #if 0 the unused ses_match_host()
    [SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memset
    [SCSI] sg: fix iovec bugs introduced by the block layer conversion
    [SCSI] qlogicpti: use request_firmware
    [SCSI] advansys: use request_firmware
    [SCSI] qla1280: use request_firmware
    [SCSI] libiscsi: fix iscsi pool error path
    [SCSI] cxgb3i: call ddp release function directly
    [SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i module
    [SCSI] cxgb3i: close all tcp connections upon chip reset
    [SCSI] cxgb3i: re-read ddp settings information after chip reset
    [SCSI] cxgb3i: re-initialize ddp settings after chip reset
    [SCSI] cxgb3i: subscribe to error notification from cxgb3 driver
    [SCSI] aacraid driver update
    [SCSI] mptsas: remove unneeded check
    [SCSI] config: Make need for SCSI_CDROM clearer
    ...

    Linus Torvalds
     

05 Apr, 2009

2 commits

  • 57579f762   bnx2: Use request_firmware() ... Browse Code »

    Based on original patch by Ben Hutchings and
    Bastian Blank , with the following main changes:

    Separated the mips firmware and rv2p firmware into different files
    to make it easier to update them separately.

    Added some code to fixup the rv2p code with run-time information
    such as PAGE_SIZE.

    Update version to 2.0.0.

    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Michael Chan
     
  • cd36e9efa   myri_sbus: use request_firmware ... Browse Code »

    Firmware blob looks like this...

    __be16 lanai4_data_size
    unsigned char lanai4_code[]

    Signed-off-by: Jaswinder Singh Rajput
    Signed-off-by: David S. Miller

    Jaswinder Singh Rajput
     

04 Apr, 2009

3 commits

03 Apr, 2009

3 commits

30 Mar, 2009

3 commits