Eric Lee / smarc-fsl-linux-kernel

19 Dec, 2011

1 commit

  • a67ff6a54   ALSA: module_param: make bool parameters really bool ... Browse Code »

    module_param(bool) used to counter-intuitively take an int. In
    fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
    trick.

    It's time to remove the int/unsigned int option. For this version
    it'll simply give a warning, but it'll break next kernel version.

    Signed-off-by: Rusty Russell
    Signed-off-by: Takashi Iwai

    Rusty Russell
     

01 Nov, 2011

1 commit

14 Sep, 2011

1 commit

  • dba8b4699   ALSA: mpu401: clean up interrupt specification ... Browse Code »

    The semantics of snd_mpu401_uart_new()'s interrupt parameters are
    somewhat counterintuitive: To prevent the function from allocating its
    own interrupt, either the irq number must be invalid, or the irq_flags
    parameter must be zero. At the same time, the irq parameter being
    invalid specifies that the mpu401 code has to work without an interrupt
    allocated by the caller. This implies that, if there is an interrupt
    and it is allocated by the caller, the irq parameter must be set to
    a valid-looking number which then isn't actually used.

    With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
    which forces us to handle the parameters differently.

    This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
    device interrupt is handled by the caller, and makes the allocation of
    the interrupt to depend only on the irq parameter. As suggested by
    Takashi, the irq_flags parameter was dropped because, when used, it had
    the constant value IRQF_DISABLED.

    Signed-off-by: Clemens Ladisch
    Signed-off-by: Takashi Iwai

    Clemens Ladisch
     

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

10 Dec, 2009

1 commit

  • 4ef58d4e2   Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
    tree-wide: fix misspelling of "definition" in comments
    reiserfs: fix misspelling of "journaled"
    doc: Fix a typo in slub.txt.
    inotify: remove superfluous return code check
    hdlc: spelling fix in find_pvc() comment
    doc: fix regulator docs cut-and-pasteism
    mtd: Fix comment in Kconfig
    doc: Fix IRQ chip docs
    tree-wide: fix assorted typos all over the place
    drivers/ata/libata-sff.c: comment spelling fixes
    fix typos/grammos in Documentation/edac.txt
    sysctl: add missing comments
    fs/debugfs/inode.c: fix comment typos
    sgivwfb: Make use of ARRAY_SIZE.
    sky2: fix sky2_link_down copy/paste comment error
    tree-wide: fix typos "couter" -> "counter"
    tree-wide: fix typos "offest" -> "offset"
    fix kerneldoc for set_irq_msi()
    spidev: fix double "of of" in comment
    comment typo fix: sybsystem -> subsystem
    ...

    Linus Torvalds
     

04 Dec, 2009

1 commit

  • af901ca18   tree-wide: fix assorted typos all over the place ... Browse Code »

    That is "success", "unknown", "through", "performance", "[re|un]mapping"
    , "access", "default", "reasonable", "[con]currently", "temperature"
    , "channel", "[un]used", "application", "example","hierarchy", "therefore"
    , "[over|under]flow", "contiguous", "threshold", "enough" and others.

    Signed-off-by: André Goddard Rosa
    Signed-off-by: Jiri Kosina

    André Goddard Rosa
     

19 Nov, 2009

1 commit

18 Nov, 2009

1 commit

  • b753e03e5   ALSA: cs4236: update control names ... Browse Code »

    Update control names to be more closer to their meaning.
    Change the "Mono" name to the "Beep" as this line is usually
    used to forward the PC beeper signal to sound card's output.
    Update names for both cs423x and wss.

    Clean up cs4235 controls according to the cs4235 doc. Rename
    some of the cs4235 controls to be consistent with the cs4236's
    ones.

    Also, delete one misnamed cs4231 register define.

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Takashi Iwai

    Krzysztof Helt
     

06 Nov, 2009

1 commit

  • d114cd84a   ALSA: cs4236: detect chip in one pass ... Browse Code »

    The cs4236 was two step detection with call to the snd_wss_free()
    between two steps. The snd_wss_free() did not free a sound device
    created in the snd_wss_create(). This caused an OOPS during module
    removal as the same sound device was released twice. The same OOPS
    happened if the cs4236 module loading failed.

    Fix this by adapting the snd_cs4236_create() to correctly work with
    chips less capable then cs4236. The snd_cs4236_create() behaves the
    same as the snd_wss_create() if the chip is less capable than the cs4236.

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Takashi Iwai

    Krzysztof Helt
     

17 Feb, 2009

3 commits

05 Feb, 2009

1 commit

12 Jan, 2009

2 commits

03 Nov, 2008

1 commit

13 Aug, 2008

1 commit

06 Aug, 2008

4 commits

27 Jul, 2008

1 commit

13 Jun, 2008

1 commit

01 Feb, 2008

3 commits

  • 39516103e   [ALSA] cs4231: remove one busy wait ... Browse Code »

    This busy_wait is not needed after latest changes
    to the cs4231-lib

    Signed-off-by: Krzysztof Helt
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Krzysztof Helt
     
  • 9004acc70   [ALSA] Remove sound/driver.h ... Browse Code »

    This header file exists only for some hacks to adapt alsa-driver
    tree. It's useless for building in the kernel. Let's move a few
    lines in it to sound/core.h and remove it.
    With this patch, sound/driver.h isn't removed but has just a single
    compile warning to include it. This should be really killed in
    future.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     
  • 109c53f84   [ALSA] sound/isa: kill pnp_resource_change ... Browse Code »

    This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
    2.4 these were useful in providing an easy path to setting the resources,
    but in 2.6 they retain function as a layering violation only.
    This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
    only remaining user of pnp_init_resource_table(), pnp_resource_change() and
    pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
    the tree outide of drivers/pnp itself meaning it makes for more cleanup
    potential inside the PnP layer.
    Thomas Renninger acked their removal from that side, you did from the ALSA
    side (CC list just copied from that thread).
    Against current alsa-kernel HG. Many more potential cleanups in there, but
    this _only_ removes the pnp_resource_change code. Compile tested against
    current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
    offsets).
    Cc: Thomas Renninger

    Signed-off-by: Rene Herman
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Rene Herman
     

16 Oct, 2007

8 commits

16 May, 2007

1 commit

11 May, 2007

4 commits

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells