10 Nov, 2010
1 commit
-
Reported-by: Dan Rosenberg
Cc: stable@kernel.org
Signed-off-by: Jens Axboe
04 Nov, 2009
1 commit
-
Quiet sparse noise about symbol's not being declared.
Symbol blk_default_cmd_filter is only used locally and should be static.
The function blk_scsi_ioctl_init() is a fs_initcall and should also be
static.Signed-off-by: H Hartley Sweeten
Cc: James Bottomley
Signed-off-by: Jens Axboe
11 Jul, 2009
1 commit
-
Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.This fixes a regression introduced by commit
018e0446890661504783f92388ecce7138c1566dSigned-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe
01 Jul, 2009
1 commit
-
The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.Signed-off-by: Jens Axboe
23 May, 2009
1 commit
-
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.Signed-off-by: Martin K. Petersen
Signed-off-by: Jens Axboe
11 May, 2009
1 commit
-
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion. This duality creates some
headaches.First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing. It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count. This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred. The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all. This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.This patch adds rq->resid_len which is used only for residual count.
While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.Boaz : spotted missing conversion in osd
Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape[ Impact: cleanup residual count handling, report 0 resid by default ]
Signed-off-by: Tejun Heo
Cc: James Bottomley
Cc: Bartlomiej Zolnierkiewicz
Cc: Borislav Petkov
Cc: Sergei Shtylyov
Cc: Mike Miller
Cc: Eric Moore
Cc: Alan Stern
Cc: FUJITA Tomonori
Cc: Doug Gilbert
Cc: Mike Miller
Cc: Eric Moore
Cc: Darrick J. Wong
Cc: Pete Zaitcev
Cc: Boaz Harrosh
Signed-off-by: Jens Axboe
28 Apr, 2009
2 commits
-
blk_get_request() always returns properly zeroed requests. Don't set
fields to zero/NULL unnecessarily.[ Impact: cleanup ]
Signed-off-by: Tejun Heo
Signed-off-by: Jens Axboe -
Now that all block request data transfer is done via bio, rq->data
isn't used. Kill it.While at it, make the roles of rq->special and buffer clear.
[ Impact: drop now unncessary field from struct request ]
Signed-off-by: Tejun Heo
Cc: Boaz Harrosh
22 Apr, 2009
1 commit
-
Impact: fix SG_IO behavior such that it matches the documentation
SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins. However, the current implementation returns -EINVAL
for such cases. Trim iovc if it's longer than ->dxfer_len.This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it. sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.Signed-off-by: Tejun Heo
Signed-off-by: Jens Axboe
15 Apr, 2009
1 commit
-
blk_rq_unmap_user() returns -EFAULT if a program passes an invalid
address to kernel. SG_IO path needs to pass the returned value to user
space instead of ignoring it.Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe
26 Mar, 2009
1 commit
-
Put a WARN_ON in __blk_put_request if it is about to
leak bio(s). This is a serious bug that can happen in error
handling code paths.For this to work I have fixed a couple of places in block/ where
request->bio != NULL ownership was not honored. And a small cleanup
at sg_io() while at it.Signed-off-by: Boaz Harrosh
Signed-off-by: Jens Axboe
29 Dec, 2008
1 commit
-
Convert the timeout ioctl scalling to use the clock_t functions
which are much more accurate with some USER_HZ vs HZ combinations.Signed-off-by: Milton Miller
Signed-off-by: Jens Axboe
06 Dec, 2008
1 commit
-
There's no point in having too short SG_IO timeouts, since if the
command does end up timing out, we'll end up through the reset sequence
that is several seconds long in order to abort the command that timed
out.As a result, shorter timeouts than a few seconds simply do not make
sense, as the recovery would be longer than the timeout itself.Add a BLK_MIN_SG_TIMEOUT to match the existign BLK_DEFAULT_SG_TIMEOUT.
Suggested-by: Alan Cox
Acked-by: Tejun Heo
Acked-by: Jens Axboe
Cc: Jeff Garzik
Signed-off-by: Linus Torvalds
21 Oct, 2008
4 commits
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
09 Oct, 2008
3 commits
-
This patch introduces struct rq_map_data to enable bio_copy_use_iov()
use reserved pages.Currently, bio_copy_user_iov allocates bounce pages but
drivers/scsi/sg.c wants to allocate pages by itself and use
them. struct rq_map_data can be used to pass allocated pages to
bio_copy_user_iov.The current users of bio_copy_user_iov simply passes NULL (they don't
want to use pre-allocated pages).Signed-off-by: FUJITA Tomonori
Cc: Jens Axboe
Cc: Douglas Gilbert
Cc: Mike Christie
Cc: James Bottomley
Signed-off-by: Jens Axboe -
Currently, blk_rq_map_user and blk_rq_map_user_iov always do
GFP_KERNEL allocation.This adds gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov
so sg can use it (sg always does GFP_ATOMIC allocation).Signed-off-by: FUJITA Tomonori
Signed-off-by: Douglas Gilbert
Cc: Mike Christie
Cc: James Bottomley
Signed-off-by: Jens Axboe -
I have another request for the block filter SG_IO command whitelist,
specifically the MMC streaming command set SET READ AHEAD command.
The command applies only to MMC CDROM/DVDROM drives with the streaming
optional feature set. The command is useful to cdparanoia in that it
allows explicit cache control side effects that are, on many drives,
cdparanoia's most efficient way to flush/disable the media cache on
cdrom drives. I am aware of no reason why it should not be accessible
from usespace.Also note that the command is already fully accessible through the
SCSI-native version of the SG_IO ioctl as well as the traditional SG
interface. The command is only being refused on block devices. That
means that on a typical stock distro, the command is available through
/dev/sg* but not /dev/scd* although both are typically available and
accessible. Filtering the command is not providing any protection,
only a confusing inconsistency.Signed-off-by: Jens Axboe
27 Aug, 2008
2 commits
-
Technically, the cmd_filter would be applied to other protocols though
it's unlikely to happen. Putting SCSI stuff to request_queue is kinda
layer violation. So let's rename it.Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe -
cmd_filter works only for the block layer SG_IO with SCSI block
devices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI
character devices (such as st). We hit a kernel crash with them.The problem is that cmd_filter code accesses to gendisk (having struct
blk_scsi_cmd_filter) via inode->i_bdev->bd_disk. It works for only
SCSI block device files. With character device files, inode->i_bdev
leads you to struct cdev. inode->i_bdev->bd_disk->blk_scsi_cmd_filter
isn't safe.SCSI ULDs don't expose gendisk; they keep it private. bsg needs to be
independent on any protocols. We shouldn't change ULDs to expose their
gendisk.This patch moves struct blk_scsi_cmd_filter from gendisk to
request_queue, a common object, which eveyone can access to.The user interface doesn't change; users can change the filters via
/sys/block/. gendisk has a pointer to request_queue so the cmd_filter
code accesses to struct blk_scsi_cmd_filter.Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe
30 Jul, 2008
1 commit
-
It seems cdrwtool in the udftools has been unusable on "modern" kernels
for some time. A Google search reveals many people with the same issue
but no solution (cdrwtool fails to format the disk). After spending some
time tracking down the issue, it comes down to the following:The udftools still use the older CDROM_SEND_PACKET interface to send
things like FORMAT_UNIT through to the drive. They should really be
updated, but that's another story. Since most distros are using libata
now, the cd or dvd burner appears as a SCSI device, and we wind up in
block/scsi_ioctl.c. Here, the code tries to take the "struct
cdrom_generic_command" and translate it and stuff it into a "struct
sg_io_hdr" structure so it can pass it to the modern sg_io() routine
instead. Unfortunately, there is one error, or rather an omission in the
translation. The timeout that is passed in in the "struct
cdrom_generic_command" is in HZ=100 units, and this is modified and
correctly converted to jiffies by use of clock_t_to_jiffies(). However,
a little further down, this cgc.timeout value in jiffies is simply
copied into the sg_io_hdr timeout, which should be in milliseconds.
Since most modern x86 kernels seems to be getting build with HZ=250, the
timeout that is passed to sg_io and eventually converted to the
timeout_per_command member of the scsi_cmnd structure is now four times
too small. Since cdrwtool tries to set the timeout to one hour for the
FORMAT_UNIT command, and it takes about 20 minutes to format a 4x CDRW,
the SCSI error-handler kicks in after the FORMAT_UNIT completes because
it took longer than the incorrectly-calculated timeout.[jejb: fix up whitespace]
Signed-off-by: Tim Wright
Cc: Stable Tree
Signed-off-by: James Bottomley
03 Jul, 2008
1 commit
-
This patch exports the per-gendisk command filter to user space through
sysfs, so it can be changed by the system administrator.
All users of the old cmd filter have been converted to use the new one.Original patch from Peter Jones.
Signed-off-by: Adel Gadllah
Signed-off-by: Peter Jones
Signed-off-by: Jens Axboe
03 May, 2008
2 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
[SCSI] aic94xx: fix section mismatch
[SCSI] u14-34f: Fix 32bit only problem
[SCSI] dpt_i2o: sysfs code
[SCSI] dpt_i2o: 64 bit support
[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent
[SCSI] dpt_i2o: use standard __init / __exit code
[SCSI] megaraid_sas: fix suspend/resume sections
[SCSI] aacraid: Add Power Management support
[SCSI] aacraid: Fix jbod operations scan issues
[SCSI] aacraid: Fix warning about macro side-effects
[SCSI] add support for variable length extended commands
[SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
[SCSI] bsg: add large command support
[SCSI] aacraid: Fix down_interruptible() to check the return value correctly
[SCSI] megaraid_sas; Update the Version and Changelog
[SCSI] ibmvscsi: Handle non SCSI error status
[SCSI] bug fix for free list handling
[SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions
[SCSI] megaraid_mbox: fix Dell CERC firmware problem -
Add support for variable-length, extended, and vendor specific
CDBs to scsi-ml. It is now possible for initiators and ULD's
to issue these types of commands. LLDs need not change much.
All they need is to raise the .max_cmd_len to the longest command
they support (see iscsi patch).- clean-up some code paths that did not expect commands to be
larger than 16, and change cmd_len members' type to short as
char is not enough.Signed-off-by: Boaz Harrosh
Signed-off-by: Benny Halevy
Signed-off-by: James Bottomley
29 Apr, 2008
1 commit
-
blk_get_request initializes rq->cmd (rq_init does) so the users don't
need to do that.The purpose of this patch is to remove sizeof(rq->cmd) and &rq->cmd,
as a preparation for large command support, which changes rq->cmd from
the static array to a pointer. sizeof(rq->cmd) will not make sense and
&rq->cmd won't work.Signed-off-by: FUJITA Tomonori
Cc: James Bottomley
Cc: Alasdair G Kergon
Cc: Jens Axboe
Signed-off-by: Jens Axboe
04 Mar, 2008
1 commit
-
The meaning of rq->data_len was changed to the length of an allocated
buffer from the true data length. It breaks SG_IO friends and
bsg. This patch restores the meaning of rq->data_len to the true data
length and adds rq->extra_len to store an extended length (due to
drain buffer and padding).This patch also removes the code to update bio in blk_rq_map_user
introduced by the commit 40b01b9bbdf51ae543a04744283bf2d56c4a6afa.
The commit adjusts bio according to memory alignment
(queue_dma_alignment). However, memory alignment is NOT padding
alignment. This adjustment also breaks SG_IO friends and bsg. Padding
alignment needs to be fixed in a proper way (by a separate patch).Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe
19 Feb, 2008
1 commit
-
With padding and draining moved into it, block layer now may extend
requests as directed by queue parameters, so now a request has two
sizes - the original request size and the extended size which matches
the size of area pointed to by bios and later by sgs. The latter size
is what lower layers are primarily interested in when allocating,
filling up DMA tables and setting up the controller.Both padding and draining extend the data area to accomodate
controller characteristics. As any controller which speaks SCSI can
handle underflows, feeding larger data area is safe.So, this patch makes the primary data length field, request->data_len,
indicate the size of full data area and add a separate length field,
request->raw_data_len, for the unmodified request size. The latter is
used to report to higher layer (userland) and where the original
request size should be fed to the controller or device.Signed-off-by: Tejun Heo
Cc: James Bottomley
Signed-off-by: Jens Axboe
18 Dec, 2007
1 commit
-
Use msecs_to_jiffies() and jiffies_to_msecs() in scsi_ioctl().
Sometimes callers use very large values for e.g. vendor specific media
clear command and calculation can overflow.Signed-off-by: Tejun Heo
Signed-off-by: Jens Axboe
24 Jul, 2007
1 commit
-
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.Signed-off-by: Jens Axboe
23 Jul, 2007
1 commit
-
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
[SCSI] libsas: make ATA functions selectable by a config option
[SCSI] bsg: unexport sg v3 helper functions
[SCSI] bsg: fix bsg_unregister_queue
[SCSI] bsg: make class backlinks
[SCSI] 3w-9xxx: add support for 9690SA
[SCSI] bsg: fix bsg_register_queue error path
[SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
[SCSI] libsas: fix scr_read/write users and update the libata documentation
[SCSI] mpt fusion: update Kconfig help
[SCSI] scsi_transport_sas: add destructor for bsg
[SCSI] iscsi_tcp: buggered kmalloc()
[SCSI] qla2xxx: Update version number to 8.02.00-k2.
[SCSI] qla2xxx: Add ISP25XX support.
[SCSI] qla2xxx: Use pci_try_set_mwi().
[SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
[SCSI] qla2xxx: Re-factor isp_operations to static structures.
[SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
[SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
[SCSI] qla2xxx: Generalize iIDMA support.
[SCSI] qla2xxx: Generalize FW-Interface-2 support.
...
22 Jul, 2007
1 commit
-
blk_fill_sghdr_rq, blk_unmap_sghdr_rq, and blk_complete_sghdr_rq were
exported for bsg, however bsg was changed to support only sg v4.Signed-off-by: FUJITA Tomonori
Signed-off-by: James Bottomley
20 Jul, 2007
1 commit
-
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).
Here is a short excerpt of the semantic patch performing
this transformation:@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@x =
- kmalloc
+ kzalloc
(E1,E2)
... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);@@
expression E1,E2,E3;
@@- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau
Cc: Richard Henderson
Cc: Ivan Kokshaysky
Acked-by: Russell King
Cc: Bryan Wu
Acked-by: Jiri Slaby
Cc: Dave Airlie
Acked-by: Roland Dreier
Cc: Jiri Kosina
Acked-by: Dmitry Torokhov
Cc: Benjamin Herrenschmidt
Acked-by: Mauro Carvalho Chehab
Acked-by: Pierre Ossman
Cc: Jeff Garzik
Cc: "David S. Miller"
Acked-by: Greg KH
Cc: James Bottomley
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
16 Jul, 2007
4 commits
-
bsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl
commands. scsi_cmd_ioctl() gets a request queue from a gendisk
arguement. This prevents bsg being bound to SCSI devices that don't
have a gendisk (like OSD). This adds a request_queue argument to
scsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn't use a gendisk so
it's safe for any SCSI devices to use scsi_cmd_ioctl().Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe -
blk_fill_sghdr_rq doesn't work for SG v4 so verify_command needed to
be exported.Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe -
This converts block/scsi_ioctl.c use blk_rq_unmap_user new
API. blk_unmap_sghdr_rq is too simple and it might be better to remove
it.Signed-off-by: FUJITA Tomonori
Signed-off-by: Jens Axboe -
Signed-off-by: Jens Axboe
18 Apr, 2007
1 commit
-
This patch (as857) modifies the SG_GET_RESERVED_SIZE and
SG_SET_RESERVED_SIZE ioctls in the sg driver, capping the values at
the device's request_queue's max_sectors value. This will permit
cdrecord to obtain a legal value for the maximum transfer length,
fixing Bugzilla #7026.The patch also caps the initial reserved_size value. There's no
reason to have a reserved buffer larger than max_sectors, since it
would be impossible to use the extra space.The corresponding ioctls in the block layer are modified similarly,
and the initial value for the reserved_size is set as large as
possible. This will effectively make it default to max_sectors.
Note that the actual value is meaningless anyway, since block devices
don't have a reserved buffer.Finally, the BLKSECTGET ioctl is added to sg, so that there will be a
uniform way for users to determine the actual max_sectors value for
any raw SCSI transport.Signed-off-by: Alan Stern
Acked-by: Jens Axboe
Acked-by: Douglas Gilbert
Signed-off-by: James Bottomley
30 Jan, 2007
1 commit
-
Commit 85e04e371b5a321b5df2bc3f8e0099a64fb087d7 cleaned up the timeout
conversion, but did it exactly the wrong way. We get msecs from user
space, and should convert them into jiffies. Not the other way around.Here is a fix with the overflow check sg.c has added in. This fixes DVD
burnign with Nero.Signed-off-by: Mike Christie
[ "you'll be wanting a comma there" - Andrew ]
Cc: Andrew Morton
Signed-off-by: Linus Torvalds
