07 Jun, 2009
1 commit
-
From the perspective of most users of recent systems, disabling Host
Protected Area (HPA) can break vendor RAID formats, GPT partitions and
risks corrupting firmware or overwriting vendor system recovery tools.Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
disabling HPA and using full disk capacity) was introduced at the time
when the main use of HPA was to make the drive look small enough for the
BIOS to allow the system to boot with large capacity drives.Thus to allow the maximum compatibility with the existing setups (using
HPA and partitioned with HPA disabled) we automically disable HPA if
any partitions overlapping HPA are detected. Additionally HPA can also
be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
to disable HPA on /dev/hda).v2:
Fix ->resume HPA support.While at it:
- remove stale "idebus=" entry from Documentation/kernel-parameters.txtCc: Robert Hancock
Cc: Frans Pop
Cc: "Andries E. Brouwer"
Cc: Al Viro
Acked-by: Sergei Shtylyov
[patch description was based on input from Alan Cox and Frans Pop]
Emphatically-Acked-by: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz
07 Jan, 2009
1 commit
-
Reported-by: Bruno Prémont
Signed-off-by: Bartlomiej Zolnierkiewicz
27 Apr, 2008
11 commits
-
* Add "doubler" parameter to enable support for IDE doublers.
* Obsolete "ide=doubler" kernel parameter.
Cc: Geert Uytterhoeven
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Add "cdrom=" and "chs=" parameters.
* Obsolete "hdx=cdrom" and "hdx=cyls,heads,sects" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Add "nodma|noflush|noprobe|nowerr=" parameters.
* Obsolete "hdx=noprobe|none|nowerr|nodma|noflush" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Remove obsoleted "hdx=autotune" kernel parameter
(we always auto-tune PIO if possible nowadays).* Remove no longer needed ide_drive_t.autotune flag.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
We have "vlb|pci_clock=" parameters now.
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Signed-off-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Signed-off-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Remove obsoleted "idex=" kernel parameters.
* Make probe_* and cmd640_vlb variables static.
Cc: Andrew Morton
Signed-off-by: Bartlomiej Zolnierkiewicz -
Remove obsoleted "idex=reset" kernel parameter
(it has been obsoleted since 1 Nov 2004).Then remove corresponding code from ide_probe_port()
and no longer used ->reset field from ide_hwif_t.Signed-off-by: Bartlomiej Zolnierkiewicz
-
Remove obsoleted "idex=serialize" kernel parameter
(it has been obsoleted since 1 Nov 2004).Signed-off-by: Bartlomiej Zolnierkiewicz
-
Add "ignore_cable" parameter:
* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
(i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")* "ignore_cable=[interface_number]" module parameter (for ide_core module)
if IDE is compiled as modulev2:
* Add ide_port_apply_params() helper
- use it in ide_device_add_all() and ide_scan_port().* Make it possible to later disable ignoring cable detection by passing
"[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
(however sysfs interface is not enabled yet since it needs some other
IDE changes to make it work reliable).Signed-off-by: Bartlomiej Zolnierkiewicz
18 Apr, 2008
5 commits
-
CONFIG_BLK_DEV_4DRIVES deserves its own host driver:
* Add drivers/ide/legacy/ide-4drives.c and move "4drives" support there.
* Add ide-4drives.o in the link order after all other legacy host
drivers enabled by "ide0=" options (they all are mutually exclusive).* Make ide-4drives host driver probe itself for IDE devices instead of
indirectly depending on ide_generic host driver.* Add "probe" module parameter to ide-4drives and update documentation.
v2:
* s/paramater/parameter/ in ide.txt. (Noticed by Randy Dunlap)v3:
* s/ide_4drives.probe/ide-4drives.probe/ in help entry.
(Noticed by Sergei Shtylyov)Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
and update Documentation/ide/ide.txt.* Remove no longer needed ide_forced chipset type.
v2:
* is_chipset_set[] -> is_chipset_set in ide.c.* Documentation/ide/ide.txt fix.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Remove CONFIG_BLK_DEV_HD hack from init_hwif_default()
("hda=noprobe hdb=noprobe" kernel parameters should be used
instead if somebody wishes to use the old "hd" driver).* Make CONFIG_BLK_DEV_HD_ONLY config option available also when
IDE subsystem is used and update help entry.* Remove no longer needed CONFIG_BLK_DEV_HD_IDE config option.
v2:
* Update documentation to suggest "hda=noprobe hdb=noprobe"
instead of obsoleted "ide0=noprobe".* Update Documentation/ide/ide.txt.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Add 'struct class ide_port_class' ('ide_port' class) and a 'struct
device *portdev' ('ide_port' class device) in ide_hwif_t.* Register 'ide_port' class in ide_init() and unregister it in
cleanup_module().* Create ->portdev in ide_register_port () and unregister it in
ide_unregister().* Add "delete_devices" class device attribute for unregistering IDE devices
on a port and "scan" one for probing+registering IDE devices on a port.* Add ide_sysfs_register_port() helper for registering "delete_devices"
and "scan" attributes with ->portdev. Call it in ide_device_add_all().* Document IDE warm-plug support in Documentation/ide/warm-plug-howto.txt.
v2:
* Convert patch from using 'struct class_device' to use 'struct device'.
(thanks to Kay Sievers for doing it)Signed-off-by: Bartlomiej Zolnierkiewicz
-
This option is obsolete and can be removed safely.
It allows us to remove the pci_get_device_reverse() function from the
PCI core.Signed-off-by: Greg Kroah-Hartman
Signed-off-by: Bartlomiej Zolnierkiewicz
22 Mar, 2008
3 commits
-
Mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted
(they are layering violation and should be dealt with in the same
way as done by libata - device-mapper should be used instead).Signed-off-by: Bartlomiej Zolnierkiewicz
-
Mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted
(nowadays device-driver binding can be changed at runtime through sysfs
and it can also be dealt with using per device driver parameters).Signed-off-by: Bartlomiej Zolnierkiewicz
-
* "hdx=cyls,heads,sects,wpcom,irq" should be "hdx=cyls,heads,sects".
* "hdx=" is for "x" from 'a' to 'u', "idex=" is for "x" from '0' to '9'.
* "idex=noautotune" is long gone.
* Obsoleted "ide0=" parameters were already removed from the documentation.
Signed-off-by: Bartlomiej Zolnierkiewicz
08 Mar, 2008
2 commits
-
Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.Signed-off-by: Randy Dunlap
Signed-off-by: Bartlomiej Zolnierkiewicz -
Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.Signed-off-by: Randy Dunlap
Signed-off-by: Bartlomiej Zolnierkiewicz
03 Feb, 2008
1 commit
-
Also, cleanup whitespace and update comments.
Bart:
- remove reference to drivers/block/ide.c
- move driver documentation to Documentation/ide/ide-tape.txtSigned-off-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz
02 Feb, 2008
2 commits
-
Move ide-floppy historical changelog to
Documentation/ide/ChangeLog.ide-floppy.1996-2002Signed-off-by: Borislav Petkov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Signed-off-by: Bartlomiej Zolnierkiewicz