10 Jul, 2013
2 commits
-
Signed-off-by: Davidlohr Bueso
Cc: Andi Kleen
Cc: Rik van Riel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Simple helpers around the (kern_ipc_perm *)->lock spinlock.
Signed-off-by: Davidlohr Bueso
Cc: Andi Kleen
Cc: Rik van Riel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
01 May, 2013
5 commits
-
Introduce finer grained locking for semtimedop, to handle the common case
of a program wanting to manipulate one semaphore from an array with
multiple semaphores.If the call is a semop manipulating just one semaphore in an array with
multiple semaphores, only take the lock for that semaphore itself.If the call needs to manipulate multiple semaphores, or another caller is
in a transaction that manipulates multiple semaphores, the sem_array lock
is taken, as well as all the locks for the individual semaphores.On a 24 CPU system, performance numbers with the semop-multi
test with N threads and N semaphores, look like this:vanilla Davidlohr's Davidlohr's + Davidlohr's +
threads patches rwlock patches v3 patches
10 610652 726325 1783589 2142206
20 341570 365699 1520453 1977878
30 288102 307037 1498167 2037995
40 290714 305955 1612665 2256484
50 288620 312890 1733453 2650292
60 289987 306043 1649360 2388008
70 291298 306347 1723167 2717486
80 290948 305662 1729545 2763582
90 290996 306680 1736021 2757524
100 292243 306700 1773700 3059159[davidlohr.bueso@hp.com: do not call sem_lock when bogus sma]
[davidlohr.bueso@hp.com: make refcounter atomic]
Signed-off-by: Rik van Riel
Suggested-by: Linus Torvalds
Acked-by: Davidlohr Bueso
Cc: Chegu Vinod
Cc: Jason Low
Reviewed-by: Michel Lespinasse
Cc: Peter Hurley
Cc: Stanislav Kinsbursky
Tested-by: Emmanuel Benisty
Tested-by: Sedat Dilek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Instead of holding the ipc lock for permissions and security checks, among
others, only acquire it when necessary.Some numbers....
1) With Rik's semop-multi.c microbenchmark we can see the following
results:Baseline (3.9-rc1):
cpus 4, threads: 256, semaphores: 128, test duration: 30 secs
total operations: 151452270, ops/sec 5048409+ 59.40% a.out [kernel.kallsyms] [k] _raw_spin_lock
+ 6.14% a.out [kernel.kallsyms] [k] sys_semtimedop
+ 3.84% a.out [kernel.kallsyms] [k] avc_has_perm_flags
+ 3.64% a.out [kernel.kallsyms] [k] __audit_syscall_exit
+ 2.06% a.out [kernel.kallsyms] [k] copy_user_enhanced_fast_string
+ 1.86% a.out [kernel.kallsyms] [k] ipc_lockWith this patchset:
cpus 4, threads: 256, semaphores: 128, test duration: 30 secs
total operations: 273156400, ops/sec 9105213+ 18.54% a.out [kernel.kallsyms] [k] _raw_spin_lock
+ 11.72% a.out [kernel.kallsyms] [k] sys_semtimedop
+ 7.70% a.out [kernel.kallsyms] [k] ipc_has_perm.isra.21
+ 6.58% a.out [kernel.kallsyms] [k] avc_has_perm_flags
+ 6.54% a.out [kernel.kallsyms] [k] __audit_syscall_exit
+ 4.71% a.out [kernel.kallsyms] [k] ipc_obtain_object_check2) While on an Oracle swingbench DSS (data mining) workload the
improvements are not as exciting as with Rik's benchmark, we can see
some positive numbers. For an 8 socket machine the following are the
percentages of %sys time incurred in the ipc lock:Baseline (3.9-rc1):
100 swingbench users: 8,74%
400 swingbench users: 21,86%
800 swingbench users: 84,35%With this patchset:
100 swingbench users: 8,11%
400 swingbench users: 19,93%
800 swingbench users: 77,69%[riel@redhat.com: fix two locking bugs]
[sasha.levin@oracle.com: prevent releasing RCU read lock twice in semctl_main]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso
Signed-off-by: Rik van Riel
Reviewed-by: Chegu Vinod
Acked-by: Michel Lespinasse
Cc: Rik van Riel
Cc: Jason Low
Cc: Emmanuel Benisty
Cc: Peter Hurley
Cc: Stanislav Kinsbursky
Tested-by: Sedat Dilek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Various forms of ipc use ipcctl_pre_down() to retrieve an ipc object and
check permissions, mostly for IPC_RMID and IPC_SET commands.Introduce ipcctl_pre_down_nolock(), a lockless version of this function.
The locking version is retained, yet modified to call the nolock version
without affecting its semantics, thus transparent to all ipc callers.Signed-off-by: Davidlohr Bueso
Signed-off-by: Rik van Riel
Suggested-by: Linus Torvalds
Cc: Chegu Vinod
Cc: Emmanuel Benisty
Cc: Jason Low
Cc: Michel Lespinasse
Cc: Peter Hurley
Cc: Stanislav Kinsbursky
Tested-by: Sedat Dilek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Through ipc_lock() and therefore ipc_lock_check() we currently return the
locked ipc object. This is not necessary for all situations and can,
therefore, cause unnecessary ipc lock contention.Introduce analogous ipc_obtain_object() and ipc_obtain_object_check()
functions that only lookup and return the ipc object.Both these functions must be called within the RCU read critical section.
[akpm@linux-foundation.org: propagate the ipc_obtain_object() errno from ipc_lock()]
Signed-off-by: Davidlohr Bueso
Signed-off-by: Rik van Riel
Reviewed-by: Chegu Vinod
Acked-by: Michel Lespinasse
Cc: Emmanuel Benisty
Cc: Jason Low
Cc: Peter Hurley
Cc: Stanislav Kinsbursky
Tested-by: Sedat Dilek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This series makes the sysv semaphore code more scalable, by reducing the
time the semaphore lock is held, and making the locking more scalable for
semaphore arrays with multiple semaphores.The first four patches were written by Davidlohr Buesso, and reduce the
hold time of the semaphore lock.The last three patches change the sysv semaphore code locking to be more
fine grained, providing a performance boost when multiple semaphores in a
semaphore array are being manipulated simultaneously.On a 24 CPU system, performance numbers with the semop-multi
test with N threads and N semaphores, look like this:vanilla Davidlohr's Davidlohr's + Davidlohr's +
threads patches rwlock patches v3 patches
10 610652 726325 1783589 2142206
20 341570 365699 1520453 1977878
30 288102 307037 1498167 2037995
40 290714 305955 1612665 2256484
50 288620 312890 1733453 2650292
60 289987 306043 1649360 2388008
70 291298 306347 1723167 2717486
80 290948 305662 1729545 2763582
90 290996 306680 1736021 2757524
100 292243 306700 1773700 3059159This patch:
There is no reason to be holding the ipc lock while reading ipcp->seq,
hence remove misleading comment.Also simplify the return value for the function.
Signed-off-by: Davidlohr Bueso
Signed-off-by: Rik van Riel
Cc: Chegu Vinod
Cc: Emmanuel Benisty
Cc: Jason Low
Cc: Michel Lespinasse
Cc: Peter Hurley
Cc: Stanislav Kinsbursky
Tested-by: Sedat Dilek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
05 Jan, 2013
2 commits
-
This patch is required for checkpoint/restore in userspace.
c/r requires some way to get all pending IPC messages without deleting
them from the queue (checkpoint can fail and in this case tasks will be
resumed, so queue have to be valid).To achive this, new operation flag MSG_COPY for sys_msgrcv() system call
was introduced. If this flag was specified, then mtype is interpreted as
number of the message to copy.If MSG_COPY is set, then kernel will allocate dummy message with passed
size, and then use new copy_msg() helper function to copy desired message
(instead of unlinking it from the queue).Notes:
1) Return -ENOSYS if MSG_COPY is specified, but
CONFIG_CHECKPOINT_RESTORE is not set.Signed-off-by: Stanislav Kinsbursky
Cc: Serge Hallyn
Cc: "Eric W. Biederman"
Cc: Pavel Emelyanov
Cc: Al Viro
Cc: KOSAKI Motohiro
Cc: Michael Kerrisk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add 3 new variables and sysctls to tune them (by one "next_id" variable
for messages, semaphores and shared memory respectively). This variable
can be used to set desired id for next allocated IPC object. By default
it's equal to -1 and old behaviour is preserved. If this variable is
non-negative, then desired idr will be extracted from it and used as a
start value to search for free IDR slot.Notes:
1) this patch doesn't guarantee that the new object will have desired
id. So it's up to user space how to handle new object with wrong id.2) After a sucessful id allocation attempt, "next_id" will be set back
to -1 (if it was non-negative).[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stanislav Kinsbursky
Cc: Serge Hallyn
Cc: "Eric W. Biederman"
Cc: Pavel Emelyanov
Cc: Al Viro
Cc: KOSAKI Motohiro
Cc: Michael Kerrisk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
07 Sep, 2012
1 commit
-
- Store the ipc owner and creator with a kuid
- Store the ipc group and the crators group with a kgid.
- Add error handling to ipc_update_perms, allowing it to
fail if the uids and gids can not be converted to kuids
or kgids.
- Modify the proc files to display the ipc creator and
owner in the user namespace of the opener of the proc file.Signed-off-by: Eric W. Biederman
31 Jul, 2012
1 commit
-
Rather than #define the options manually in the architecture code, add
Kconfig options for them and select them there instead. This also allows
us to select the compat IPC version parsing automatically for platforms
using the old compat IPC interface.Reported-by: Andrew Morton
Signed-off-by: Will Deacon
Cc: Arnd Bergmann
Cc: Chris Metcalf
Cc: Catalin Marinas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Mar, 2011
1 commit
-
CAP_IPC_OWNER and CAP_IPC_LOCK can be checked against current_user_ns(),
because the resource comes from current's own ipc namespace.setuid/setgid are to uids in own namespace, so again checks can be against
current_user_ns().Changelog:
Jan 11: Use task_ns_capable() in place of sched_capable().
Jan 11: Use nsown_capable() as suggested by Bastian Blank.
Jan 11: Clarify (hopefully) some logic in futex and sched.c
Feb 15: use ns_capable for ipc, not nsown_capable
Feb 23: let copy_ipcs handle setting ipc_ns->user_ns
Feb 23: pass ns down rather than taking it from current[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge E. Hallyn
Acked-by: "Eric W. Biederman"
Acked-by: Daniel Lezcano
Acked-by: David Howells
Cc: James Morris
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
22 Jun, 2009
1 commit
-
31a985f "ipc: use __ARCH_WANT_IPC_PARSE_VERSION in ipc/util.h" would
choose the implementation of ipc_parse_version() based on a symbol
defined in .But it failed to also include this header and thus broke
IPC_64-passing 32-bit userspace because the flag wasn't masked out
properly anymore and the command not understood.Include to give the architecture a chance to ask for
the no-no-op ipc_parse_version().Signed-off-by: Johannes Weiner
Acked-by: Arnd Bergmann
Signed-off-by: Linus Torvalds
19 Jun, 2009
2 commits
-
Function is really private to ipc/ and avoid struct kern_ipc_perm
forward declaration.Signed-off-by: Alexey Dobriyan
Reviewed-by: WANG Cong
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The definition of ipc_parse_version depends on
__ARCH_WANT_IPC_PARSE_VERSION, but the header file declares it
conditionally based on the architecture.Use the macro consistently to make it easier to add new architectures.
Signed-off-by: Arnd Bergmann
Acked-by: Serge Hallyn
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
07 Apr, 2009
2 commits
-
Implement multiple mounts of the mqueue file system, and link it to usage
of CLONE_NEWIPC.Each ipc ns has a corresponding mqueuefs superblock. When a user does
clone(CLONE_NEWIPC) or unshare(CLONE_NEWIPC), the unshare will cause an
internal mount of a new mqueuefs sb linked to the new ipc ns.When a user does 'mount -t mqueue mqueue /dev/mqueue', he mounts the
mqueuefs superblock.Posix message queues can be worked with both through the mq_* system calls
(see mq_overview(7)), and through the VFS through the mqueue mount. Any
usage of mq_open() and friends will work with the acting task's ipc
namespace. Any actions through the VFS will work with the mqueuefs in
which the file was created. So if a user doesn't remount mqueuefs after
unshare(CLONE_NEWIPC), mq_open("/ab") will not be reflected in "ls
/dev/mqueue".If task a mounts mqueue for ipc_ns:1, then clones task b with a new ipcns,
ipcns:2, and then task a is the last task in ipc_ns:1 to exit, then (1)
ipc_ns:1 will be freed, (2) it's superblock will live on until task b
umounts the corresponding mqueuefs, and vfs actions will continue to
succeed, but (3) sb->s_fs_info will be NULL for the sb corresponding to
the deceased ipc_ns:1.To make this happen, we must protect the ipc reference count when
a) a task exits and drops its ipcns->count, since it might be dropping
it to 0 and freeing the ipcnsb) a task accesses the ipcns through its mqueuefs interface, since it
bumps the ipcns refcount and might race with the last task in the ipcns
exiting.So the kref is changed to an atomic_t so we can use
atomic_dec_and_lock(&ns->count,mq_lock), and every access to the ipcns
through ns = mqueuefs_sb->s_fs_info is protected by the same lock.Signed-off-by: Cedric Le Goater
Signed-off-by: Serge E. Hallyn
Cc: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Move mqueue vfsmount plus a few tunables into the ipc_namespace struct.
The CONFIG_IPC_NS boolean and the ipc_namespace struct will serve both the
posix message queue namespaces and the SYSV ipc namespaces.The sysctl code will be fixed separately in patch 3. After just this
patch, making a change to posix mqueue tunables always changes the values
in the initial ipc namespace.Signed-off-by: Cedric Le Goater
Signed-off-by: Serge E. Hallyn
Cc: Alexey Dobriyan
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
26 Jul, 2008
1 commit
-
Remove the ipc_lock_down() routines: they used to call idr_find() locklessly
(given that the ipc ids lock was already held), so they are not needed
anymore.Signed-off-by: Nadia Derbey
Acked-by: "Paul E. McKenney"
Cc: Manfred Spraul
Cc: Jim Houston
Cc: Pierre Peiffer
Acked-by: Rik van Riel
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
29 Apr, 2008
4 commits
-
Add definitions of USHORT_MAX and others into kernel. ipc uses it and slub
implementation might also use it.[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Zhang Yanmin
Reviewed-by: Christoph Lameter
Cc: Nadia Derbey
Cc: "Pierre Peiffer"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
semctl_down(), msgctl_down() and shmctl_down() are used to handle the same set
of commands for each kind of IPC. They all start to do the same job (they
retrieve the ipc and do some permission checks) before handling the commands
on their own.This patch proposes to consolidate this by moving these same pieces of code
into one common function called ipcctl_pre_down().It simplifies a little these xxxctl_down() functions and increases a little
the maintainability.Signed-off-by: Pierre Peiffer
Acked-by: Serge Hallyn
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The IPC_SET command performs the same permission setting for all IPCs. This
patch introduces a common ipc_update_perm() function to update these
permissions and makes use of it for all IPCs.Signed-off-by: Pierre Peiffer
Acked-by: Serge Hallyn
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Introduce the registration of a callback routine that recomputes msg_ctlmni
upon memory add / remove.A single notifier block is registered in the hotplug memory chain for all the
ipc namespaces.Since the ipc namespaces are not linked together, they have their own
notification chain: one notifier_block is defined per ipc namespace.Each time an ipc namespace is created (removed) it registers (unregisters) its
notifier block in (from) the ipcns chain. The callback routine registered in
the memory chain invokes the ipcns notifier chain with the IPCNS_LOWMEM event.
Each callback routine registered in the ipcns namespace, in turn, recomputes
msgmni for the owning namespace.Signed-off-by: Nadia Derbey
Cc: Yasunori Goto
Cc: Matt Helsley
Cc: Mingming Cao
Cc: Pierre Peiffer
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 Feb, 2008
3 commits
-
Each ipc_namespace contains a table of 3 pointers to struct ipc_ids (3 for
msg, sem and shm, structure used to store all ipcs) These 'struct ipc_ids'
are dynamically allocated for each icp_namespace as the ipc_namespace
itself (for the init namespace, they are initialized with pointers to
static variables instead)It is so for historical reason: in fact, before the use of idr to store the
ipcs, the ipcs were stored in tables of variable length, depending of the
maximum number of ipc allowed. Now, these 'struct ipc_ids' have a fixed
size. As they are allocated in any cases for each new ipc_namespace, there
is no gain of memory in having them allocated separately of the struct
ipc_namespace.This patch proposes to make this table static in the struct ipc_namespace.
Thus, we can allocate all in once and get rid of all the code needed to
allocate and free these ipc_ids separately.Signed-off-by: Pierre Peiffer
Acked-by: Cedric Le Goater
Cc: Pavel Emelyanov
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
ipc_lock_check_down(), ipc_lock_check() and ipcget() seem too large to be
inline. Besides, they give no optimization being inline as they perform
calls inside in any case.Moving them into ipc/util.c saves 500 bytes of vmlinux and shortens IPC
internal API.$ ./scripts/bloat-o-meter vmlinux-orig vmlinux
add/remove: 3/2 grow/shrink: 0/10 up/down: 490/-989 (-499)
function old new delta
ipcget - 392 +392
ipc_lock_check_down - 49 +49
ipc_lock_check - 49 +49
sys_semget 119 105 -14
sys_shmget 108 86 -22
sys_msgget 100 78 -22
do_msgsnd 665 631 -34
do_msgrcv 680 644 -36
do_shmat 771 733 -38
sys_msgctl 1302 1229 -73
ipcget_new 80 - -80
sys_semtimedop 1534 1452 -82
sys_semctl 2034 1922 -112
sys_shmctl 1919 1765 -154
ipcget_public 322 - -322The ipcget() growth is the result of gcc inlining of currently static
ipcget_new/_public.Signed-off-by: Pavel Emelyanov
Cc: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Currently the IPC namespace management code is spread over the ipc/*.c files.
I moved this code into ipc/namespace.c file which is compiled out when needed.The linux/ipc_namespace.h file is used to store the prototypes of the
functions in namespace.c and the stubs for NAMESPACES=n case. This is done
so, because the stub for copy_ipc_namespace requires the knowledge of the
CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in
included into many many .c files via the sys.h->sem.h sequence so adding the
sched.h into it will make all these .c depend on sched.h which is not that
good. On the other hand the knowledge about the namespaces stuff is required
in 4 .c files only.Besides, this patch compiles out some auxiliary functions from ipc/sem.c,
msg.c and shm.c files. It turned out that moving these functions into
namespaces.c is not that easy because they use many other calls and macros
from the original file. Moving them would make this patch complicated. On
the other hand all these functions can be consolidated, so I will send a
separate patch doing this a bit later.Signed-off-by: Pavel Emelyanov
Acked-by: Serge Hallyn
Cc: Cedric Le Goater
Cc: "Eric W. Biederman"
Cc: Herbert Poetzl
Cc: Kirill Korotaev
Cc: Sukadev Bhattiprolu
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
20 Oct, 2007
10 commits
-
Remvoe the unneeded parameters from ipc_checkid() and ipc_buildid()
interfaces.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a patch that fixes the way idr_find() used to be called in ipc_lock():
in all the paths that don't imply an update of the ipcs idr, it was called
without the idr tree being locked.The changes are:
. in ipc_ids, the mutex has been changed into a reader/writer semaphore.
. ipc_lock() now takes the mutex as a reader during the idr_find().
. a new routine ipc_lock_down() has been defined: it doesn't take the
mutex, assuming that it is being held by the caller. This is the routine
that is now called in all the update paths.Signed-off-by: Nadia Derbey
Acked-by: Jarek Poplawski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch fixes the wrong / obsolete comments in the ipc code. Also adds
a missing lock around ipc_get_maxid() in shm_get_stat().Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a trivial patch that changes the ipc_buildid() routine into a static
inline.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a trivial patch that changes all the (id % SEQ_MULTIPLIER) into a call
to the ipcid_to_idx(id) macro.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch converts casts of struct kern_ipc_perm to
. struct msg_queue
. struct sem_array
. struct shmid_kernel
into the equivalent container_of() macro. It improves code maintenance
because the code need not change if kern_ipc_perm is no longer at the
beginning of the containing struct.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch introduces a new ipc_lock_check() routine interface:
. each time ipc_checkid() is called, this is done after calling ipc_lock().
ipc_checkid() is now called from inside ipc_lock_check().[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix RCU locking]
Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This is a trivial patch that removes the ipc_get() routine: it is replaced
by a call to idr_find().Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch introduces a change into the sys_msgget(), sys_semget() and
sys_shmget() routines: they now share a common code, which is better for
maintainability.Signed-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch introduces ipcs storage into IDRs. The main changes are:
. This ipc_ids structure is changed: the entries array is changed into a
root idr structure.
. The grow_ary() routine is removed: it is not needed anymore when adding
an ipc structure, since we are now using the IDR facility.
. The ipc_rmid() routine interface is changed:
. there is no need for this routine to return the pointer passed in as
argument: it is now declared as a void
. since the id is now part of the kern_ipc_perm structure, no need to
have it as an argument to the routineSigned-off-by: Nadia Derbey
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Jul, 2007
1 commit
-
CONFIG_UTS_NS and CONFIG_IPC_NS have very little value as they only
deactivate the unshare of the uts and ipc namespaces and do not improve
performance.Signed-off-by: Cedric Le Goater
Acked-by: "Serge E. Hallyn"
Cc: Eric W. Biederman
Cc: Herbert Poetzl
Cc: Pavel Emelianov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
04 Nov, 2006
1 commit
-
Fix two issuses related to ipc_ids->entries freeing.
1. When freeing ipc namespace we need to free entries allocated
with ipc_init_ids().2. When removing old entries in grow_ary() ipc_rcu_putref()
may be called on entries set to &ids->nullentry earlier in
ipc_init_ids().
This is almost impossible without namespaces, but with
them this situation becomes possible.Found during OpenVZ testing after obvious leaks in beancounters.
Signed-off-by: Pavel Emelianov
Cc: Kirill Korotaev
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
02 Oct, 2006
1 commit
-
This patch adds basic IPC namespace functionality to
IPC utils:
- init_ipc_ns
- copy/clone/unshare/free IPC ns
- /proc preparationsSigned-off-by: Pavel Emelianov
Signed-off-by: Kirill Korotaev
Cc: "Eric W. Biederman"
Cc: Cedric Le Goater
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 Mar, 2006
1 commit
-
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.Signed-off-by: Ingo Molnar
Cc: Manfred Spraul
Signed-off-by: Lee Schermerhorn
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
15 Jan, 2006
1 commit
-
I tried to send the forcedeth maintainer an email, but it came back with:
"The mail address manfreds@colorfullife.com is not read anymore.
Please resent your mail to manfred@ instead of manfreds@."This patch fixes this.
Signed-off-by: Adrian Bunk
