15 May, 2007
4 commits
-
... and make it depend on the response flag instead of the command type.
Signed-off-by: Nicolas Pitre
Signed-off-by: Pierre Ossman -
The MMC block devices now have an assigned major. Make sure
we actually use it.Signed-off-by: Pierre Ossman
-
When the device hits certain memory boundaries, it signals an
interrupt and expects to be serviced. We don't need the feature
but we need to make sure the device doesn't stall.Signed-off-by: Pierre Ossman
-
This patch has changed command types check from data flags.
MMC_STOP_TRANSMISSION is never passed to au1xmmc_send_command().
SEND_STOP() is used for MMC_STOP_TRANSMISSION.Signed-off-by: Yoichi Yuasa
Signed-off-by: Pierre Ossman
10 May, 2007
2 commits
-
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.Signed-off-by: Martin Schwidefsky
-
Cc: Pierre Ossman
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
09 May, 2007
3 commits
-
As mmc_detect_change() can be called from irq context, using
claim (which can sleep) is inherently unsafe. Use the host
spinlock instead, which also is faster.Signed-off-by: Pierre Ossman
-
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.Signed-off-by: Jan Engelhardt
Signed-off-by: Pierre Ossman -
Socket power must be fully controlled by adapter driver. This also prevents
unnecessary power-off of the socket when media driver is unloaded, yet
media remains in the socket.Signed-off-by: Alex Dubov
Signed-off-by: Pierre Ossman
07 May, 2007
1 commit
-
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
[ARM] Add comments marking in-use ptrace numbers
[ARM] Move syscall saving out of the way of utrace
[ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
[ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
[ARM] mm 10: allow memory type to be specified with ioremap
[ARM] mm 9: add additional device memory types
[ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
[ARM] iop: add missing parens in macro
[ARM] mm 7: remove duplicated __ioremap() prototypes
ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
ARM: OMAP: MPUIO wake updates
ARM: OMAP: speed up gpio irq handling
ARM: OMAP: plat-omap changes for 2430 SDP
ARM: OMAP: gpio object shrinkage, cleanup
ARM: OMAP: /sys/kernel/debug/omap_gpio
ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
ARM: OMAP: Enable 24xx GPIO autoidling
[ARM] 4318/2: DSM-G600 Board Support
[ARM] 4227/1: minor head.S fixups
[ARM] 4328/1: Move i.MX UART regs to driver
...
01 May, 2007
30 commits
-
Move divisor calculation into a separate function and re-arrange the
init order to make MMC_POWER_ON work.Signed-off-by: Tony Lindgren
Signed-off-by: Pierre Ossman -
As discussed earlier on LKML:
http://lkml.org/lkml/2006/5/4/44
Signed-off-by: Tony Lindgren
Signed-off-by: Pierre Ossman -
This patch add a missing '\n' at the end of the 'cover is open' string
in mmc_omap_switch_handler().Signed-off-by: Arnaud Patard
Signed-off-by: Tony Lindgren
Signed-off-by: Pierre Ossman -
This patch makes the needlessly global tifm_sd_set_dma_data() static.
Signed-off-by: Adrian Bunk
Signed-off-by: Pierre Ossman -
Remove card states that no longer make any sense.
Signed-off-by: Pierre Ossman
-
Since many have the system root on MMC/SD we must allow some foot
shooting when it comes to resume.We cannot detect if a card is removed and reinserted during suspend,
so the safe approach would be to assume it was, avoiding potential
filesystem corruption. This will of course not work if you cannot
release the card before suspend.This commit adds a compile time option that makes the MMC layer
assume the card wasn't touched if it is redetected upon resume.Signed-off-by: Pierre Ossman
-
Separate the reading and decoding of the EXT_CSD register with the
actions taken on it.Signed-off-by: Pierre Ossman
-
Break apart the SD switch function into one that reads the capabilities
and one that acts on them.Signed-off-by: Pierre Ossman
-
Fix handling of low voltage MMC cards.
The latest MMC and SD specs both agree that support for
low-voltage operations is indicated by bit 7 in the OCR.
The MMC spec states that the low voltage range is
1.65-1.95V while the SD spec leaves the actual voltage
range undefined - meaning that there is still no such
thing as a low voltage SD card.However, an old Sandisk spec implied that bits 7.0
represented voltages below 2.0V in 1V or 0.5V increments,
and the code was accordingly written with that expectation.This confusion meant that host drivers attempting to support
the typical low voltage (1.8V) would set the wrong bits in
the host OCR mask (usually bits 5 and/or 6) resulting in the
the low voltage mode never being used.This change corrects the low voltage range and adds sanity
checks on the reserved bits (0-6) and for SD cards that
claim to support low-voltage operations.Signed-off-by: Philip Langdale
Signed-off-by: Pierre Ossman -
Consolidate the list of available voltages.
Up until now, a separate set of defines has been
used for host->vdd than that used for the OCR
voltage mask values. Having two sets of defines
allows them to get out of sync and the current
sets are already inconsistent with one claiming
to describe ranges and the other specific voltages.Only the SDHCI driver uses the host->vdd defines and
it is easily fixed to use the OCR defines.Signed-off-by: Philip Langdale
Signed-off-by: Pierre Ossman -
Delegate protocol handling to "bus handlers". This allows the core to
just handle the task of arbitrating the bus. Initialisation and
pampering of cards is now done by the different bus handlers.This design also allows MMC and SD (and later SDIO) to be more cleanly
separated, allowing easier maintenance.Signed-off-by: Pierre Ossman
-
Move the check for supported data opcodes to the beginning of the
request function to avoid wedging the card.Signed-off-by: Pierre Ossman
-
Move protocol operations and definitions into their own files
in an effort to separate protocol handling and bus
arbitration more clearly.Signed-off-by: Pierre Ossman
-
Create a "core" subdirectory to house the central bus handling
functions.Signed-off-by: Pierre Ossman
-
The classic MMC bus was defined as multi card bus
system, which is reflected in the design in the MMC
layer.When SD showed up, the bus topology was abandoned
and a star topology (one card per host) was mandated.
MMC version 4 has followed this, officially deprecating
the bus topology.As we do not have any known users of the bus
topology we can remove support for it. This will
simplify the code and rectify some incorrect
assumptions in the newer additions.Signed-off-by: Pierre Ossman
-
Suspending MMC/SD cards (versus removing and readding them) is an
inherently unsafe operation and has even been broken for some time.Signed-off-by: Pierre Ossman
-
Make sure we don't deadlock when removing a suspended block
queue, something that might happen if the card is removed during
suspend.Signed-off-by: Pierre Ossman
-
Make sure we kill of any pending detection runs when the host
is removed instead of when it is freed. Also add some debugging
to make sure the driver doesn't queue up more detection after it
has removed the host.Signed-off-by: Pierre Ossman
-
Clean up the drivers/mmc directory by moving card and host drivers
into subdirectories.Signed-off-by: Pierre Ossman
-
The mmc block queue functions are tailored for the mmc_block
driver, so move those functions into that module.Signed-off-by: Pierre Ossman
-
The "present" state indicates that the card is a registered device, so
it is more clear to put it together with the actual registration.Signed-off-by: Pierre Ossman
-
All host drivers were #include:ing mmc/protocol.h just to
get access to the OCR bit defines. Move these to host.h instead.Signed-off-by: Pierre Ossman
-
Split out the type of card into its own field as it hardly
qualifies as a state.Signed-off-by: Pierre Ossman
-
Support for MMC 4.2 sector based cards. This tweaks the init a
bit and reads a new field out of the EXT_CSD.Signed-off-by: Pierre Ossman
-
Fix copy-n-paste error.
Signed-off-by: Pierre Ossman
-
Cosmetic changes to the code.
Signed-off-by: Alex Dubov
Signed-off-by: Pierre Ossman -
It was found that delays associated with issue and completion of the commands
severely limit performance of the new, fast SD cards. To alleviate this issue
scatter-gather emulation in software is implemented for both dma and pio
transfer modes. Non-block aligned and high memory sg entries are accounted
for.Signed-off-by: Alex Dubov
Signed-off-by: Pierre Ossman -
Resume should not explicitly check for media type. Instead, it may relay
on success of socket initialization.
Small changes are introduced to tifm_sd_initialize to make it more robust.Signed-off-by: Alex Dubov
Signed-off-by: Pierre Ossman -
State machine used to to track mmc command state was found to be fragile
and unreliable, making many cards unusable. The safer solution is to perform
all needed checks at every card event.Signed-off-by: Alex Dubov
Signed-off-by: Pierre Ossman -
To allow for switching of trasfer mode (dma/pio) on a per-request basis,
pio and dma request issue and completion function are now merged.Signed-off-by: Alex Dubov
Signed-off-by: Pierre Ossman
