09 Jan, 2012
3 commits
-
Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu -
Change default clock rate of GPIO based I2C operation for BF533
and BF561 to bring up the I2C interface LCD displaySigned-off-by: Aaron Wu
Signed-off-by: Bob Liu -
Macro name for spi controller driver has been modified, so update default
board file accordingly.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
14 Nov, 2011
1 commit
-
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bob Liu
26 Oct, 2011
1 commit
-
This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang
Acked-by: Bob Liu
Signed-off-by: Mike Frysinger
23 Jul, 2011
2 commits
-
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant. So punt
those parts.Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
28 May, 2011
1 commit
-
* git://git.infradead.org/mtd-2.6: (97 commits)
mtd: kill CONFIG_MTD_PARTITIONS
mtd: remove add_mtd_partitions, add_mtd_device and friends
mtd: convert remaining users to mtd_device_register()
mtd: samsung onenand: convert to mtd_device_register()
mtd: omap2 onenand: convert to mtd_device_register()
mtd: txx9ndfmc: convert to mtd_device_register()
mtd: tmio_nand: convert to mtd_device_register()
mtd: socrates_nand: convert to mtd_device_register()
mtd: sharpsl: convert to mtd_device_register()
mtd: s3c2410 nand: convert to mtd_device_register()
mtd: ppchameleonevb: convert to mtd_device_register()
mtd: orion_nand: convert to mtd_device_register()
mtd: omap2: convert to mtd_device_register()
mtd: nomadik_nand: convert to mtd_device_register()
mtd: ndfc: convert to mtd_device_register()
mtd: mxc_nand: convert to mtd_device_register()
mtd: mpc5121_nfc: convert to mtd_device_register()
mtd: jz4740_nand: convert to mtd_device_register()
mtd: h1910: convert to mtd_device_register()
mtd: fsmc_nand: convert to mtd_device_register()
...Fixed up trivial conflicts in
- drivers/mtd/maps/integrator-flash.c: removed in ARM tree
- drivers/mtd/maps/physmap.c: addition of afs partition probe type
clashing with removal of CONFIG_MTD_PARTITIONS
25 May, 2011
2 commits
-
Both the BF548-EZKIT and the BF561-EZKIT use top boot flashes, so now
that Das U-Boot uses the last small sector for its environment, update
their nor layout in the kernel accordingly.Signed-off-by: Mike Frysinger
-
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.Cc: Mike Frysinger
Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
18 Mar, 2011
1 commit
-
Signed-off-by: Thomas Gleixner
Signed-off-by: Mike Frysinger
10 Jan, 2011
1 commit
-
Signed-off-by: Mike Frysinger
22 Oct, 2010
5 commits
-
Rather than use raw numbers for the GPIO pins, use proper GPIO defines.
Signed-off-by: Mike Frysinger
-
This board has an AD1836 codec, so make sure we have the right resources
declared for it.Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger -
With the recent kernel update the isp1362-hcd driver evaluates the
IORESOURCE_IRQ resource flags and requests the irq with the given
polarity/edge settings. However the ISP1362 config requires low
level/edge interrupts. Most of the Blackfin boards use some random
flag or no flag at all. Make all boards use a know good flag
IORESOURCE_IRQ_LOWEDGE.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger -
The NAND platform driver expects the registers to have a "mem"
resource type rather than "io".Signed-off-by: Valentin Yakovenkov
Signed-off-by: Mike Frysinger -
Make sure we use the right Kconfig names and platform strings.
Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger
12 Aug, 2010
1 commit
-
These two platforms didn't properly fill nr_chips in gen_nand
registration and therefore depended on gen_nand bug fixed by by commit
81cbb0b17796d81cbd92defe113cf2a7c7a21fbb ("mtd: gen_nand: fix support for
multiple chips")Signed-off-by: Marek Vasut
Signed-off-by: David Woodhouse
23 May, 2010
1 commit
-
The timeout value is in jiffies, so it should be using HZ, not a plain
number. As '10000' is ambiguous, 1HZ is used as conservative default.Signed-off-by: Wolfram Sang
Cc: Valentin Yakovenkov
Signed-off-by: Mike Frysinger
09 Mar, 2010
4 commits
-
The ASoC codec driver was generalized and renamed, so update the board
resources accordingly.Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger -
Signed-off-by: Valentin Yakovenkov
Signed-off-by: Mike Frysinger -
This lets people easily select the UART/SPORT consoles for early printk
while leveraging the pins declared in the boards file.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file. This lets people easily select the specific pins/ports for
the normal UART as well as GPIOs for CTS/RTS.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
15 Dec, 2009
3 commits
-
The ax88180 driver was never merged, so drop the corresponding resources.
Signed-off-by: Mike Frysinger
-
Signed-off-by: Valentin Yakovenkov
Signed-off-by: Mike Frysinger -
The driver changed from "isp1760-hcd" to "isp1760", so update resources
to match.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
08 Oct, 2009
1 commit
-
The simple-gpio has been replaced by the gpio sysfs interface, so drop the
unused simple-gpio resources from all Blackfin boards.Signed-off-by: Mike Frysinger
07 Oct, 2009
1 commit
-
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.It also removes:
- verbose GPL text(refer to the top level ./COPYING file)
- file names (you are looking at the file)
- bug url (it's in the ./MAINTAINERS file)
- "or later" on GPL-2, when we did not have that rightIt also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).Signed-off-by: Robin Getz
Signed-off-by: Mike Frysinger
17 Sep, 2009
4 commits
-
Signed-off-by: Harald Krapfenbauer
Signed-off-by: Mike Frysinger -
The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger -
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.Signed-off-by: Mike Frysinger
-
Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
23 Jun, 2009
1 commit
-
The port1 disable stuff was dropped from the USB ISP1760, so update the
Blackfin boards accordingly.Signed-off-by: Mike Frysinger
13 Jun, 2009
1 commit
-
The Blackfin SPI driver can be driven by an IRQ now, so declare it in
the board resources.Signed-off-by: Yi Li
Signed-off-by: Mike Frysinger
12 Jun, 2009
1 commit
-
Try to keep the naming conventions consistent, so:
SPI_ADC_BF533 -> BFIN_SPI_ADC
TWI_LCD -> BFIN_TWI_LCDSigned-off-by: Mike Frysinger
06 Mar, 2009
1 commit
-
Signed-off-by: Mike Frysinger
Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu
02 Mar, 2009
1 commit
-
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
07 Jan, 2009
2 commits
-
Signed-off-by: Graf Yang
Signed-off-by: Bryan Wu -
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
18 Nov, 2008
1 commit
-
Cc: Graf Yang
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu