27 Aug, 2011
1 commit
-
The nfsservctl system call is now gone, so we should remove all
linkage for it.Signed-off-by: NeilBrown
Signed-off-by: J. Bruce Fields
Signed-off-by: Linus Torvalds
26 Jul, 2011
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
fs: Merge split strings
treewide: fix potentially dangerous trailing ';' in #defined values/expressions
uwb: Fix misspelling of neighbourhood in comment
net, netfilter: Remove redundant goto in ebt_ulog_packet
trivial: don't touch files that are removed in the staging tree
lib/vsprintf: replace link to Draft by final RFC number
doc: Kconfig: `to be' -> `be'
doc: Kconfig: Typo: square -> squared
doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
drivers/net: static should be at beginning of declaration
drivers/media: static should be at beginning of declaration
drivers/i2c: static should be at beginning of declaration
XTENSA: static should be at beginning of declaration
SH: static should be at beginning of declaration
MIPS: static should be at beginning of declaration
ARM: static should be at beginning of declaration
rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Update my e-mail address
PCIe ASPM: forcedly -> forcibly
gma500: push through device driver tree
...Fix up trivial conflicts:
- arch/arm/mach-ep93xx/dma-m2p.c (deleted)
- drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
- drivers/net/r8169.c (just context changes)
24 Jul, 2011
1 commit
-
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.Signed-off-by: Jonas Bonn
Acked-by: Mike Frysinger
Acked-by: Geert Uytterhoeven
Tested-by: Michal Simek
Signed-off-by: Rusty Russell
21 Jul, 2011
1 commit
-
All these are instances of
#define NAME value;
or
#define NAME(params_opt) value;These of course fail to build when used in contexts like
if(foo $OP NAME)
while(bar $OP NAME)
and may silently generate the wrong code in contexts such as
foo = NAME + 1; /* foo = value; + 1; */
bar = NAME - 1; /* bar = value; - 1; */
baz = NAME & quux; /* baz = value; & quux; */Reported on comp.lang.c,
Message-ID:
Initial analysis of the dangers provided by Keith Thompson in that thread.There are many more instances of more complicated macros having unnecessary
trailing semicolons, but this pile seems to be all of the cases of simple
values suffering from the problem. (Thus things that are likely to be found
in one of the contexts above, more complicated ones aren't.)Signed-off-by: Phil Carmody
Signed-off-by: Jiri Kosina
29 May, 2011
1 commit
-
32bit and 64bit on x86 are tested and working. The rest I have looked
at closely and I can't find any problems.setns is an easy system call to wire up. It just takes two ints so I
don't expect any weird architecture porting problems.While doing this I have noticed that we have some architectures that are
very slow to get new system calls. cris seems to be the slowest where
the last system calls wired up were preadv and pwritev. avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h. frv is
behind with perf_event_open being the last syscall wired up. On h8300
the last system call wired up was epoll_wait. On m32r the last system
call wired up was fallocate. mn10300 has recvmmsg as the last system
call wired up. The rest seem to at least have syncfs wired up which was
new in the 2.6.39.v2: Most of the architecture support added by Daniel Lezcano
v3: ported to v2.6.36-rc4 by: Eric W. Biederman
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall conflicts.
v7: ported to Linus's latest post 2.6.39 tree.> arch/blackfin/include/asm/unistd.h | 3 ++-
> arch/blackfin/mach-common/entry.S | 1 +
Acked-by: Mike FrysingerOh - ia64 wiring looks good.
Acked-by: Tony LuckSigned-off-by: Eric W. Biederman
Signed-off-by: Linus Torvalds
25 Mar, 2011
2 commits
-
Signed-off-by: Thomas Gleixner
-
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner
31 Jan, 2011
1 commit
-
xtime_update() takes the xtime_lock itself.
Signed-off-by: Torben Hohn
Cc: Yoshinori Sato
Cc: Peter Zijlstra
Cc: johnstul@us.ibm.com
Cc: hch@infradead.org
Cc: yong.zhang0@gmail.com
LKML-Reference:
Signed-off-by: Thomas Gleixner
21 Jan, 2011
3 commits
-
Switch to the generic irq Kconfig. h8300 has all irq chips converted
to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED
switch as well. Fixup the resulting fallout in show_interrupts().Signed-off-by: Thomas Gleixner
Cc: Yoshinori Sato
Cc: Paul Mundt -
__do_IRQ is deprecated so h8300 needs to be converted to proper flow
handling. The irq chip is simple and does not required any
mask/ack/eoi functions, so we can use handle_simple_irq.Signed-off-by: Thomas Gleixner
Cc: Yoshinori Sato
Cc: Paul Mundt -
No functional change, just straight forward conversion.
Signed-off-by: Thomas Gleixner
Cc: Yoshinori Sato
Cc: Paul Mundt
18 Nov, 2010
1 commit
-
The big kernel lock has been removed from all these files at some point,
leaving only the #include.Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann
Signed-off-by: Linus Torvalds
28 Oct, 2010
2 commits
-
Use new 'regno', 'datap' variables in order to remove duplicated
expressions and unnecessary castings. Alse remove checking @addr
less than 0 because addr is now unsigned.Signed-off-by: Namhyung Kim
Cc: Yoshinori Sato
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.Signed-off-by: Namhyung Kim
Cc:
Acked-by: Roland McGrath
Acked-by: David Howells
Acked-by: Geert Uytterhoeven
Acked-by: David S. Miller
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
06 Oct, 2010
1 commit
-
With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling. That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.Future fixups:
- move the module list handling code into kernel/module.c where it
belongs.
- get rid of 'module_bug_list' and just use the regular list of modules
(called 'modules' - imagine that) that we already create and maintain
for other reasons.Reported-and-tested-by: Thomas Gleixner
Cc: Rusty Russell
Cc: Adrian Bunk
Cc: Andrew Morton
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds
08 Sep, 2010
2 commits
-
Fix missing consts in h8300's kernel_execve():
arch/h8300/kernel/sys_h8300.c: In function 'kernel_execve':
arch/h8300/kernel/sys_h8300.c:59: warning: initialization from incompatible pointer type
arch/h8300/kernel/sys_h8300.c:60: warning: initialization from incompatible pointer typeSigned-off-by: David Howells
Signed-off-by: Linus Torvalds -
Fix h8300's die() to take care of a number of problems:
CC arch/h8300/kernel/traps.o
In file included from arch/h8300/include/asm/bitops.h:10,
from include/linux/bitops.h:22,
from include/linux/kernel.h:17,
from include/linux/sched.h:54,
from arch/h8300/kernel/traps.c:18:
arch/h8300/include/asm/system.h:136: warning: 'struct pt_regs' declared inside parameter list
arch/h8300/include/asm/system.h:136: warning: its scope is only this definition or declaration, which is probably not what you want
arch/h8300/kernel/traps.c:100: error: conflicting types for 'die'
arch/h8300/include/asm/system.h:136: error: previous declaration of 'die' was here
make[2]: *** [arch/h8300/kernel/traps.o] Error 1Signed-off-by: David Howells
Signed-off-by: Linus Torvalds
18 Aug, 2010
1 commit
-
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type
This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to. This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel(). A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.Further kernel_execve() and sys_execve() need to be changed to match.
This has been test built on x86_64, frv, arm and mips.
Signed-off-by: David Howells
Tested-by: Ralf Baechle
Acked-by: Russell King
Signed-off-by: Linus Torvalds
14 Aug, 2010
1 commit
-
Mark arguments to certain system calls as being const where they should be but
aren't. The list includes:(*) The filename arguments of various stat syscalls, execve(), various utimes
syscalls and some mount syscalls.(*) The filename arguments of some syscall helpers relating to the above.
(*) The buffer argument of various write syscalls.
Signed-off-by: David Howells
Acked-by: David S. Miller
Signed-off-by: Linus Torvalds
17 Jun, 2010
1 commit
-
Signed-off-by: Uwe Kleine-König
Signed-off-by: Jiri Kosina
20 May, 2010
1 commit
-
…ernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
avr32: Fix typo in read_persistent_clock()
sparc: Convert sparc to use read/update_persistent_clock
cris: Convert cris to use read/update_persistent_clock
m68k: Convert m68k to use read/update_persistent_clock
m32r: Convert m32r to use read/update_peristent_clock
blackfin: Convert blackfin to use read/update_persistent_clock
ia64: Convert ia64 to use read/update_persistent_clock
avr32: Convert avr32 to use read/update_persistent_clock
h8300: Convert h8300 to use read/update_persistent_clock
frv: Convert frv to use read/update_persistent_clock
mn10300: Convert mn10300 to use read/update_persistent_clock
alpha: Convert alpha to use read/update_persistent_clock
xtensa: Fix unnecessary setting of xtime
time: Clean up direct xtime usage in xen
30 Mar, 2010
1 commit
-
…it slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
13 Mar, 2010
6 commits
-
This patch converts the h8300 architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.I have not built or tested this patch, so help from arch maintainers
would be appreciated.Signed-off-by: John Stultz
Cc: Yoshinori Sato
Cc: Andrew Morton
LKML-Reference:
Signed-off-by: Thomas Gleixner -
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP. This implies defining
arch_has_single_step in and implementing the
user_enable_single_step and user_disable_single_step functions, which also
causes the breakpoint information to be cleared on fork, which could be
considered a bug fix.Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL which
it previously wasn't which is consistent with all architectures using the
modern ptrace code.Signed-off-by: Christoph Hellwig
Cc: Oleg Nesterov
Cc: Roland McGrath
Cc: Yoshinori Sato
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Use ptrace_request() in the three remaining architectures that didn't use it
(m68knommu, h8300, microblaze). This means:- ptrace_request now handles PTRACE_{PEEK,POKE}{TEXT,DATA} and PTRACE_DETATCH
calls that were previously called directly, or in case of h8300 even open
coded.
- adds new support for PTRACE_SETOPTIONS/PTRACE_GETEVENTMSG/
PTRACE_GETSIGINFO/PTRACE_SETSIGINFOSigned-off-by: Christoph Hellwig
Cc: Geert Uytterhoeven
Cc: Yoshinori Sato
Cc: Oleg Nesterov
Cc: Michal Simek
Acked-by: Greg Ungerer
Acked-by: Roland McGrath
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add a generic implementation of the ipc demultiplexer syscall. Except for
s390 and sparc64 all implementations of the sys_ipc are nearly identical.There are slight differences in the types of the parameters, where mips
and powerpc as the only 64-bit architectures with sys_ipc use unsigned
long for the "third" argument as it gets casted to a pointer later, while
it traditionally is an "int" like most other paramters. frv goes even
further and uses unsigned long for all parameters execept for "ptr" which
is a pointer type everywhere. The change from int to unsigned long for
"third" and back to "int" for the others on frv should be fine due to the
in-register calling conventions for syscalls (we already had a similar
issue with the generic sys_ptrace), but I'd prefer to have the arch
maintainers looks over this in details.Except for that h8300, m68k and m68knommu lack an impplementation of the
semtimedop sub call which this patch adds, and various architectures have
gets used - at least on i386 it seems superflous as the compat code on
x86-64 and ia64 doesn't even bother to implement it.[akpm@linux-foundation.org: add sys_ipc to sys_ni.c]
Signed-off-by: Christoph Hellwig
Cc: Ralf Baechle
Cc: Benjamin Herrenschmidt
Cc: Paul Mundt
Cc: Jeff Dike
Cc: Hirokazu Takata
Cc: Thomas Gleixner
Cc: Ingo Molnar
Reviewed-by: H. Peter Anvin
Cc: Al Viro
Cc: Arnd Bergmann
Cc: Heiko Carstens
Cc: Martin Schwidefsky
Cc: "Luck, Tony"
Cc: James Morris
Cc: Andreas Schwab
Acked-by: Jesper Nilsson
Acked-by: Russell King
Acked-by: David Howells
Acked-by: Kyle McMartin
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add a generic implementation of the old mmap() syscall, which expects its
argument in a memory block and switch all architectures over to use it.Signed-off-by: Christoph Hellwig
Cc: Ralf Baechle
Cc: Benjamin Herrenschmidt
Cc: Paul Mundt
Cc: Jeff Dike
Cc: Hirokazu Takata
Cc: Thomas Gleixner
Cc: Ingo Molnar
Reviewed-by: H. Peter Anvin
Cc: Al Viro
Cc: Arnd Bergmann
Cc: Heiko Carstens
Cc: Martin Schwidefsky
Cc: "Luck, Tony"
Cc: James Morris
Cc: Andreas Schwab
Acked-by: Jesper Nilsson
Acked-by: Russell King
Acked-by: Greg Ungerer
Acked-by: David Howells
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add a generic implementation of the old select() syscall, which expects
its argument in a memory block and switch all architectures over to use
it.Signed-off-by: Christoph Hellwig
Cc: Ralf Baechle
Cc: Benjamin Herrenschmidt
Cc: Paul Mundt
Cc: Jeff Dike
Cc: Hirokazu Takata
Cc: Thomas Gleixner
Cc: Ingo Molnar
Reviewed-by: H. Peter Anvin
Cc: Al Viro
Cc: Arnd Bergmann
Cc: Heiko Carstens
Cc: Martin Schwidefsky
Cc: "Luck, Tony"
Cc: James Morris
Acked-by: Andreas Schwab
Acked-by: Russell King
Acked-by: Greg Ungerer
Acked-by: David Howells
Cc: Andreas Schwab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Dec, 2009
1 commit
-
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
modpost: fix segfault with short symbol names
module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y
Kbuild: clear marker out of modpost
module: make MODULE_SYMBOL_PREFIX into a CONFIG option
ARM: unexport symbols used to implement floating point emulation
ARM: use unified discard definition in linker script
x86: don't export inline function
sparc64: don't export static inline pci_ functions
15 Dec, 2009
2 commits
-
The next commit will require the use of MODULE_SYMBOL_PREFIX in
.tmp_exports-asm.S. Currently it is mixed in with C structure
definitions in "asm/module.h". Move the definition of this arch option
into Kconfig, so it can be easily accessed by any code.This also lets modpost.c use the same definition. Previously modpost
relied on a hardcoded list of architectures in mk_elfconfig.c.A build test for blackfin, one of the two MODULE_SYMBOL_PREFIX archs,
showed the generated code was unchanged. vmlinux was identical save
for build ids, and an apparently randomized suffix on a single "__key"
symbol in the kallsyms data).Signed-off-by: Alan Jenkins
Acked-by: Mike Frysinger (blackfin)
CC: Sam Ravnborg
Signed-off-by: Rusty Russell -
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.Signed-off-by: Thomas Gleixner
Acked-by: Peter Zijlstra
Acked-by: Ingo Molnar
11 Dec, 2009
1 commit
-
New helper - sys_mmap_pgoff(); switch syscalls to using it.
Acked-by: David S. Miller
Signed-off-by: Al Viro
14 Oct, 2009
1 commit
-
This looks like a copy-and-paste job for code that no-longer needs the
BKL Just remove it.Signed-off-by: John Kacur
Reviewed-by: Frederic Weisbecker
Cc: Yoshinori Sato
LKML-Reference:
Signed-off-by: Thomas Gleixner
25 Sep, 2009
1 commit
-
Signed-off-by: Tim Abbott
Cc: Yoshinori Sato
Acked-by: Sam Ravnborg
Signed-off-by: Linus Torvalds
24 Sep, 2009
2 commits
-
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need itNOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.Signed-off-by: Alexey Dobriyan
Signed-off-by: Linus Torvalds -
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
Use macros for .data.page_aligned section.
Use macros for .bss.page_aligned section.
Use new __init_task_data macro in arch init_task.c files.
kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
kbuild: add static to prototypes
kbuild: fail build if recordmcount.pl fails
kbuild: set -fconserve-stack option for gcc 4.5
kbuild: echo the record_mcount command
gconfig: disable "typeahead find" search in treeviews
kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
checkincludes.pl: add option to remove duplicates in place
markup_oops: use modinfo to avoid confusion with underscored module names
checkincludes.pl: provide usage helper
checkincludes.pl: close file as soon as we're done with it
ctags: usability fix
kernel hacking: move STRIP_ASM_SYMS from General
gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
kbuild: Check if linker supports the -X option
kbuild: introduce ld-option
...Fix trivial conflict in scripts/basic/fixdep.c
22 Sep, 2009
2 commits
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
trivial: fix typo in aic7xxx comment
trivial: fix comment typo in drivers/ata/pata_hpt37x.c
trivial: typo in kernel-parameters.txt
trivial: fix typo in tracing documentation
trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
trivial: remove unnecessary semicolons
trivial: Fix duplicated word "options" in comment
trivial: kbuild: remove extraneous blank line after declaration of usage()
trivial: improve help text for mm debug config options
trivial: doc: hpfall: accept disk device to unload as argument
trivial: doc: hpfall: reduce risk that hpfall can do harm
trivial: SubmittingPatches: Fix reference to renumbered step
trivial: fix typos "man[ae]g?ment" -> "management"
trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
trivial: fix missing printk space in amd_k7_smp_check
trivial: fix typo s/ketymap/keymap/ in comment
trivial: fix typo "to to" in multiple files
trivial: fix typos in comments s/DGBU/DBGU/
... -
Signed-off-by: Christoph Hellwig
Cc: Yoshinori Sato
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
21 Sep, 2009
2 commits
-
Ignore drivers/staging/ since it is very likely that new drivers
introduce it again.Signed-off-by: Markus Heidelberg
Signed-off-by: Jiri Kosina -
Signed-off-by: Joe Perches
Signed-off-by: Tim Abbott
Acked-by: Paul Mundt
Signed-off-by: Sam Ravnborg
