Eric Lee / smarc-fsl-linux-kernel

14 Nov, 2011

1 commit

  • 63f722e62   MIPS: Sibyte: drop select of SIBYTE_CFE ... Browse Code »

    SIBYTE_CFE got killed in commit 05f94eebd5 ("MIPS: Sibyte: Remove
    standalone kernel support"). This means that since v2.6.31 there is no
    Kconfig symbol SIBYTE_CFE. The select statement for that symbol is a
    nop. Drop it.

    Signed-off-by: Paul Bolle
    Signed-off-by: Jiri Kosina

    Paul Bolle
     

21 Jul, 2011

1 commit

  • 1544129da   MIPS: SB1250: Restore dropped irq_mask function ... Browse Code »

    Commit d6d5d5c4a (MIPS: Sibyte: Convert to new irq_chip functions)
    removed the mask function which breaks irq_shutdown(). Restore it.

    Reported-by: Matt Turner
    Signed-off-by: Thomas Gleixner
    Cc: linux-mips@linux-mips.org
    Patchwork: https://patchwork.linux-mips.org/patch/2460/
    Tested-by: Matt Turner
    Signed-off-by: Ralf Baechle

    Thomas Gleixner
     

14 Apr, 2011

1 commit

  • 184748cc5   sched: Provide scheduler_ipi() callback in response to smp_send_reschedule() ... Browse Code »

    For future rework of try_to_wake_up() we'd like to push part of that
    function onto the CPU the task is actually going to run on.

    In order to do so we need a generic callback from the existing scheduler IPI.

    This patch introduces such a generic callback: scheduler_ipi() and
    implements it as a NOP.

    BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!

    Acked-by: Russell King
    Acked-by: Martin Schwidefsky
    Acked-by: Chris Metcalf
    Acked-by: Jesper Nilsson
    Acked-by: Benjamin Herrenschmidt
    Signed-off-by: Ralf Baechle
    Reviewed-by: Frank Rowand
    Cc: Mike Galbraith
    Cc: Nick Piggin
    Cc: Linus Torvalds
    Cc: Andrew Morton
    Signed-off-by: Ingo Molnar
    Signed-off-by: Peter Zijlstra
    Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl

    Peter Zijlstra
     

29 Mar, 2011

1 commit

26 Mar, 2011

1 commit

19 Jan, 2011

1 commit

17 Dec, 2010

1 commit

25 Oct, 2010

1 commit

  • 229aebb87   Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
    Update broken web addresses in arch directory.
    Update broken web addresses in the kernel.
    Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
    Revert "Fix typo: configuation => configuration" partially
    ida: document IDA_BITMAP_LONGS calculation
    ext2: fix a typo on comment in ext2/inode.c
    drivers/scsi: Remove unnecessary casts of private_data
    drivers/s390: Remove unnecessary casts of private_data
    net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
    drivers/infiniband: Remove unnecessary casts of private_data
    drivers/gpu/drm: Remove unnecessary casts of private_data
    kernel/pm_qos_params.c: Remove unnecessary casts of private_data
    fs/ecryptfs: Remove unnecessary casts of private_data
    fs/seq_file.c: Remove unnecessary casts of private_data
    arm: uengine.c: remove C99 comments
    arm: scoop.c: remove C99 comments
    Fix typo configue => configure in comments
    Fix typo: configuation => configuration
    Fix typo interrest[ing|ed] => interest[ing|ed]
    Fix various typos of valid in comments
    ...

    Fix up trivial conflicts in:
    drivers/char/ipmi/ipmi_si_intf.c
    drivers/usb/gadget/rndis.c
    net/irda/irnet/irnet_ppp.c

    Linus Torvalds
     

15 Oct, 2010

1 commit

  • 6038f373a   llseek: automatically add .llseek fop ... Browse Code »

    All file_operations should get a .llseek operation so we can make
    nonseekable_open the default for future file operations without a
    .llseek pointer.

    The three cases that we can automatically detect are no_llseek, seq_lseek
    and default_llseek. For cases where we can we can automatically prove that
    the file offset is always ignored, we use noop_llseek, which maintains
    the current behavior of not returning an error from a seek.

    New drivers should normally not use noop_llseek but instead use no_llseek
    and call nonseekable_open at open time. Existing drivers can be converted
    to do the same when the maintainer knows for certain that no user code
    relies on calling seek on the device file.

    The generated code is often incorrectly indented and right now contains
    comments that clarify for each added line why a specific variant was
    chosen. In the version that gets submitted upstream, the comments will
    be gone and I will manually fix the indentation, because there does not
    seem to be a way to do that using coccinelle.

    Some amount of new code is currently sitting in linux-next that should get
    the same modifications, which I will do at the end of the merge window.

    Many thanks to Julia Lawall for helping me learn to write a semantic
    patch that does all this.

    ===== begin semantic patch =====
    // This adds an llseek= method to all file operations,
    // as a preparation for making no_llseek the default.
    //
    // The rules are
    // - use no_llseek explicitly if we do nonseekable_open
    // - use seq_lseek for sequential files
    // - use default_llseek if we know we access f_pos
    // - use noop_llseek if we know we don't access f_pos,
    // but we still want to allow users to call lseek
    //
    @ open1 exists @
    identifier nested_open;
    @@
    nested_open(...)
    {

    }

    @ open exists@
    identifier open_f;
    identifier i, f;
    identifier open1.nested_open;
    @@
    int open_f(struct inode *i, struct file *f)
    {

    }

    @ read disable optional_qualifier exists @
    identifier read_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    expression E;
    identifier func;
    @@
    ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
    {

    }

    @ read_no_fpos disable optional_qualifier exists @
    identifier read_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    @@
    ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
    {
    ... when != off
    }

    @ write @
    identifier write_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    expression E;
    identifier func;
    @@
    ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
    {

    }

    @ write_no_fpos @
    identifier write_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    @@
    ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
    {
    ... when != off
    }

    @ fops0 @
    identifier fops;
    @@
    struct file_operations fops = {
    ...
    };

    @ has_llseek depends on fops0 @
    identifier fops0.fops;
    identifier llseek_f;
    @@
    struct file_operations fops = {
    ...
    .llseek = llseek_f,
    ...
    };

    @ has_read depends on fops0 @
    identifier fops0.fops;
    identifier read_f;
    @@
    struct file_operations fops = {
    ...
    .read = read_f,
    ...
    };

    @ has_write depends on fops0 @
    identifier fops0.fops;
    identifier write_f;
    @@
    struct file_operations fops = {
    ...
    .write = write_f,
    ...
    };

    @ has_open depends on fops0 @
    identifier fops0.fops;
    identifier open_f;
    @@
    struct file_operations fops = {
    ...
    .open = open_f,
    ...
    };

    // use no_llseek if we call nonseekable_open
    ////////////////////////////////////////////
    @ nonseekable1 depends on !has_llseek && has_open @
    identifier fops0.fops;
    identifier nso ~= "nonseekable_open";
    @@
    struct file_operations fops = {
    ... .open = nso, ...
    +.llseek = no_llseek, /* nonseekable */
    };

    @ nonseekable2 depends on !has_llseek @
    identifier fops0.fops;
    identifier open.open_f;
    @@
    struct file_operations fops = {
    ... .open = open_f, ...
    +.llseek = no_llseek, /* open uses nonseekable */
    };

    // use seq_lseek for sequential files
    /////////////////////////////////////
    @ seq depends on !has_llseek @
    identifier fops0.fops;
    identifier sr ~= "seq_read";
    @@
    struct file_operations fops = {
    ... .read = sr, ...
    +.llseek = seq_lseek, /* we have seq_read */
    };

    // use default_llseek if there is a readdir
    ///////////////////////////////////////////
    @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier readdir_e;
    @@
    // any other fop is used that changes pos
    struct file_operations fops = {
    ... .readdir = readdir_e, ...
    +.llseek = default_llseek, /* readdir is present */
    };

    // use default_llseek if at least one of read/write touches f_pos
    /////////////////////////////////////////////////////////////////
    @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read.read_f;
    @@
    // read fops use offset
    struct file_operations fops = {
    ... .read = read_f, ...
    +.llseek = default_llseek, /* read accesses f_pos */
    };

    @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier write.write_f;
    @@
    // write fops use offset
    struct file_operations fops = {
    ... .write = write_f, ...
    + .llseek = default_llseek, /* write accesses f_pos */
    };

    // Use noop_llseek if neither read nor write accesses f_pos
    ///////////////////////////////////////////////////////////

    @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read_no_fpos.read_f;
    identifier write_no_fpos.write_f;
    @@
    // write fops use offset
    struct file_operations fops = {
    ...
    .write = write_f,
    .read = read_f,
    ...
    +.llseek = noop_llseek, /* read and write both use no f_pos */
    };

    @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier write_no_fpos.write_f;
    @@
    struct file_operations fops = {
    ... .write = write_f, ...
    +.llseek = noop_llseek, /* write uses no f_pos */
    };

    @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read_no_fpos.read_f;
    @@
    struct file_operations fops = {
    ... .read = read_f, ...
    +.llseek = noop_llseek, /* read uses no f_pos */
    };

    @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    @@
    struct file_operations fops = {
    ...
    +.llseek = noop_llseek, /* no read or write fn */
    };
    ===== End semantic patch =====

    Signed-off-by: Arnd Bergmann
    Cc: Julia Lawall
    Cc: Christoph Hellwig

    Arnd Bergmann
     

23 Sep, 2010

1 commit

05 Aug, 2010

1 commit

21 May, 2010

2 commits

  • f8965467f   Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 ... Browse Code »

    * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
    qlcnic: adding co maintainer
    ixgbe: add support for active DA cables
    ixgbe: dcb, do not tag tc_prio_control frames
    ixgbe: fix ixgbe_tx_is_paused logic
    ixgbe: always enable vlan strip/insert when DCB is enabled
    ixgbe: remove some redundant code in setting FCoE FIP filter
    ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
    ixgbe: fix header len when unsplit packet overflows to data buffer
    ipv6: Never schedule DAD timer on dead address
    ipv6: Use POSTDAD state
    ipv6: Use state_lock to protect ifa state
    ipv6: Replace inet6_ifaddr->dead with state
    cxgb4: notify upper drivers if the device is already up when they load
    cxgb4: keep interrupts available when the ports are brought down
    cxgb4: fix initial addition of MAC address
    cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
    cnic: Convert cnic_local_flags to atomic ops.
    can: Fix SJA1000 command register writes on SMP systems
    bridge: fix build for CONFIG_SYSFS disabled
    ARCNET: Limit com20020 PCI ID matches for SOHARD cards
    ...

    Fix up various conflicts with pcmcia tree drivers/net/
    {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
    wireless/orinoco/spectrum_cs.c} and feature removal
    (Documentation/feature-removal-schedule.txt).

    Also fix a non-content conflict due to pm_qos_requirement getting
    renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

    Linus Torvalds
     
  • f39d01be4   Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
    vlynq: make whole Kconfig-menu dependant on architecture
    add descriptive comment for TIF_MEMDIE task flag declaration.
    EEPROM: max6875: Header file cleanup
    EEPROM: 93cx6: Header file cleanup
    EEPROM: Header file cleanup
    agp: use NULL instead of 0 when pointer is needed
    rtc-v3020: make bitfield unsigned
    PCI: make bitfield unsigned
    jbd2: use NULL instead of 0 when pointer is needed
    cciss: fix shadows sparse warning
    doc: inode uses a mutex instead of a semaphore.
    uml: i386: Avoid redefinition of NR_syscalls
    fix "seperate" typos in comments
    cocbalt_lcdfb: correct sections
    doc: Change urls for sparse
    Powerpc: wii: Fix typo in comment
    i2o: cleanup some exit paths
    Documentation/: it's -> its where appropriate
    UML: Fix compiler warning due to missing task_struct declaration
    UML: add kernel.h include to signal.c
    ...

    Linus Torvalds
     

12 May, 2010

1 commit

01 May, 2010

1 commit

  • b20947aaa   MIPS: Fixup screen_info struct initializations ... Browse Code »

    |arch/mips/sibyte/swarm/setup.c:153:
    | warning: large integer implicitly truncated to unsigned type

    The field was changed in d9b26352 aka ("x86, setup: Store the boot
    cursor state"). This patch changes the values back they way they were
    before this extra field got introduced.

    While here, the other two boards are also converted to C99 initializer.

    Signed-off-by: Sebastian Andrzej Siewior
    Cc: linux-mips@linux-mips.org
    Patchwork: http://patchwork.linux-mips.org/patch/1137/
    Signed-off-by: Ralf Baechle

    Sebastian Andrzej Siewior
     

28 Apr, 2010

1 commit

23 Apr, 2010

1 commit

13 Apr, 2010

1 commit

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

29 Mar, 2010

1 commit

27 Feb, 2010

4 commits

17 Dec, 2009

1 commit

01 Oct, 2009

3 commits

24 Sep, 2009

1 commit

  • 48a048fed   cpumask: arch_send_call_function_ipi_mask: mips ... Browse Code »

    We're weaning the core code off handing cpumask's around on-stack.
    This introduces arch_send_call_function_ipi_mask(), and by defining
    it, the old arch_send_call_function_ipi is defined by the core code.

    We also take the chance to wean the implementations off the
    obsolescent for_each_cpu_mask(): making send_ipi_mask take the pointer
    seemed the most natural way to ensure all implementations used
    for_each_cpu.

    Signed-off-by: Rusty Russell

    Rusty Russell
     

15 Aug, 2009

1 commit

  • d4f587c67   timekeeping: Increase granularity of read_persistent_clock() ... Browse Code »

    The persistent clock of some architectures (e.g. s390) have a
    better granularity than seconds. To reduce the delta between the
    host clock and the guest clock in a virtualized system change the
    read_persistent_clock function to return a struct timespec.

    Signed-off-by: Martin Schwidefsky
    Cc: Ingo Molnar
    Acked-by: John Stultz
    Cc: Daniel Walker
    LKML-Reference:
    Signed-off-by: Thomas Gleixner

    Martin Schwidefsky
     

04 Aug, 2009

1 commit

  • 49316cbf0   MIPS: Eleminate filenames from comments ... Browse Code »

    They tend to get not updated when files are moved around or copied and
    lack any obvious use. While at it zap some only too obvious comments and
    as per Shinya's suggestion, add a copyright header to extable.c.

    Signed-off-by: Ralf Baechle
    Acked-by: Shinya Kuribayashi
    Acked-by: Thadeu Lima de Souza Cascardo

    Ralf Baechle
     

25 Jun, 2009

2 commits

17 Jun, 2009

3 commits

11 Jun, 2009

1 commit

  • f0d5e12bd   Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip ... Browse Code »

    * 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
    x86, apic: Fix dummy apic read operation together with broken MP handling
    x86, apic: Restore irqs on fail paths
    x86: Print real IOAPIC version for x86-64
    x86: enable_update_mptable should be a macro
    sparseirq: Allow early irq_desc allocation
    x86, io-apic: Don't mark pin_programmed early
    x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
    x86, irq: update_mptable needs pci_routeirq
    x86: don't call read_apic_id if !cpu_has_apic
    x86, apic: introduce io_apic_irq_attr
    x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
    x86: read apic ID in the !acpi_lapic case
    x86: apic: Fixmap apic address even if apic disabled
    x86: display extended apic registers with print_local_APIC and cpu_debug code
    x86: read apic ID in the !acpi_lapic case
    x86: clean up and fix setup_clear/force_cpu_cap handling
    x86: apic: Check rev 3 fadt correctly for physical_apic bit
    x86/pci: update pirq_enable_irq() to setup io apic routing
    x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
    x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
    ...

    Linus Torvalds
     

08 Jun, 2009

1 commit

02 Jun, 2009

1 commit

14 May, 2009

1 commit