Eric Lee / smarc-fsl-linux-kernel

01 Jul, 2011

1 commit

  • a8b0ca17b   perf: Remove the nmi parameter from the swevent and overflow interface ... Browse Code »
    1

    The nmi parameter indicated if we could do wakeups from the current
    context, if not, we would set some state and self-IPI and let the
    resulting interrupt do the wakeup.

    For the various event classes:

    - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
    - tracepoint: nmi=0; since tracepoint could be from NMI context.
    - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

    As one can see, there is very little nmi=1 usage, and the down-side of
    not using it is that on some platforms some software events can have a
    jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

    The up-side however is that we can remove the nmi parameter and save a
    bunch of conditionals in fast paths.

    Signed-off-by: Peter Zijlstra
    Cc: Michael Cree
    Cc: Will Deacon
    Cc: Deng-Cheng Zhu
    Cc: Anton Blanchard
    Cc: Eric B Munson
    Cc: Heiko Carstens
    Cc: Paul Mundt
    Cc: David S. Miller
    Cc: Frederic Weisbecker
    Cc: Jason Wessel
    Cc: Don Zickus
    Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
    Signed-off-by: Ingo Molnar

    Peter Zijlstra
     

02 Jul, 2010

1 commit

  • 59615ecdb   sh: Provide a global TLB flush for U/I-TLB clear. ... Browse Code »

    This provides a sledgehammer approach for clearing the TLBs, only to be
    used in cases where we know we will never want to use the mappings again
    and have no interest in preserving state. This also destroys wired
    entries.

    The primary use for this is when we are either entering or exiting the
    kernel completely, in the latter case as a precursor for CPU reset by
    MMU.

    Signed-off-by: Paul Mundt

    Paul Mundt
     

26 Apr, 2010

2 commits

16 Jan, 2010

1 commit

  • 24ef7fc4d   sh: Acquire some more page flags for SH-5. ... Browse Code »

    We need some more page flags to hook up _PAGE_WIRED (and eventually
    other things). So use the unused PTE bits above the PPN field as no
    implementations use these for anything currently.

    Now that we have _PAGE_WIRED let's provide the SH-5 functions for wiring
    up TLB entries.

    Signed-off-by: Matt Fleming

    Matt Fleming
     

21 Sep, 2009

1 commit

  • cdd6c482c   perf: Do the big rename: Performance Counters -> Performance Events ... Browse Code »

    Bye-bye Performance Counters, welcome Performance Events!

    In the past few months the perfcounters subsystem has grown out its
    initial role of counting hardware events, and has become (and is
    becoming) a much broader generic event enumeration, reporting, logging,
    monitoring, analysis facility.

    Naming its core object 'perf_counter' and naming the subsystem
    'perfcounters' has become more and more of a misnomer. With pending
    code like hw-breakpoints support the 'counter' name is less and
    less appropriate.

    All in one, we've decided to rename the subsystem to 'performance
    events' and to propagate this rename through all fields, variables
    and API names. (in an ABI compatible fashion)

    The word 'event' is also a bit shorter than 'counter' - which makes
    it slightly more convenient to write/handle as well.

    Thanks goes to Stephane Eranian who first observed this misnomer and
    suggested a rename.

    User-space tooling and ABI compatibility is not affected - this patch
    should be function-invariant. (Also, defconfigs were not touched to
    keep the size down.)

    This patch has been generated via the following script:

    FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

    sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

    for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
    done

    FILES=$(find . -name perf_event.*)

    sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

    ... to keep it as correct as possible. This script can also be
    used by anyone who has pending perfcounters patches - it converts
    a Linux kernel tree over to the new naming. We tried to time this
    change to the point in time where the amount of pending patches
    is the smallest: the end of the merge window.

    Namespace clashes were fixed up in a preparatory patch - and some
    stylistic fallout will be fixed up in a subsequent patch.

    ( NOTE: 'counters' are still the proper terminology when we deal
    with hardware registers - and these sed scripts are a bit
    over-eager in renaming them. I've undone some of that, but
    in case there's something left where 'counter' would be
    better than 'event' we can undo that on an individual basis
    instead of touching an otherwise nicely automated patch. )

    Suggested-by: Stephane Eranian
    Acked-by: Peter Zijlstra
    Acked-by: Paul Mackerras
    Reviewed-by: Arjan van de Ven
    Cc: Mike Galbraith
    Cc: Arnaldo Carvalho de Melo
    Cc: Frederic Weisbecker
    Cc: Steven Rostedt
    Cc: Benjamin Herrenschmidt
    Cc: David Howells
    Cc: Kyle McMartin
    Cc: Martin Schwidefsky
    Cc: "David S. Miller"
    Cc: Thomas Gleixner
    Cc: "H. Peter Anvin"
    Cc:
    LKML-Reference:
    Signed-off-by: Ingo Molnar

    Ingo Molnar
     

15 Aug, 2009

1 commit

04 Aug, 2009

1 commit

28 Jul, 2009

1 commit

  • 9cef74926   sh: update_mmu_cache() consolidation. ... Browse Code »

    This splits out a separate __update_cache()/__update_tlb() for
    update_mmu_cache() to wrap in to. This lets us share the common
    __update_cache() bits while keeping special __update_tlb() handling
    broken out.

    Signed-off-by: Paul Mundt

    Paul Mundt
     

25 Jun, 2009

1 commit

22 Jun, 2009

1 commit

  • d06063cc2   Move FAULT_FLAG_xyz into handle_mm_fault() callers ... Browse Code »

    This allows the callers to now pass down the full set of FAULT_FLAG_xyz
    flags to handle_mm_fault(). All callers have been (mechanically)
    converted to the new calling convention, there's almost certainly room
    for architectures to clean up their code and then add FAULT_FLAG_RETRY
    when that support is added.

    Signed-off-by: Linus Torvalds

    Linus Torvalds
     

06 Mar, 2008

1 commit

28 Jan, 2008

1 commit