12 Jan, 2012
1 commit
-
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
PCI: Increase resource array mask bit size in pcim_iomap_regions()
PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
x86/PCI: amd: factor out MMCONFIG discovery
PCI: Enable ATS at the device state restore
PCI: msi: fix imbalanced refcount of msi irq sysfs objects
PCI: kconfig: English typo in pci/pcie/Kconfig
PCI/PM/Runtime: make PCI traces quieter
PCI: remove pci_create_bus()
xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
sparc/PCI: convert to pci_create_root_bus()
sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
powerpc/PCI: convert to pci_create_root_bus()
powerpc/PCI: split PHB part out of pcibios_map_io_space()
...Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.
11 Jan, 2012
1 commit
-
lib: use generic pci_iomap on all architectures
Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
alpha: drop pci_iomap/pci_iounmap from pci-noop.c
mn10300: switch to GENERIC_PCI_IOMAP
mn10300: add missing __iomap markers
frv: switch to GENERIC_PCI_IOMAP
tile: switch to GENERIC_PCI_IOMAP
tile: don't panic on iomap
sparc: switch to GENERIC_PCI_IOMAP
sh: switch to GENERIC_PCI_IOMAP
powerpc: switch to GENERIC_PCI_IOMAP
parisc: switch to GENERIC_PCI_IOMAP
mips: switch to GENERIC_PCI_IOMAP
microblaze: switch to GENERIC_PCI_IOMAP
arm: switch to GENERIC_PCI_IOMAP
alpha: switch to GENERIC_PCI_IOMAP
lib: add GENERIC_PCI_IOMAP
lib: move GENERIC_IOMAP to lib/KconfigFix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
10 Jan, 2012
5 commits
-
This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang
-
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.Cc: Oleg Nesterov
Cc: Guan Xuetao
Signed-off-by: Matt Fleming
Cc: Arnd Bergmann
Acked-by: Guan Xuetao -
Bugfix for following error messages:
lib/iomap.c: In function 'pci_iomap':
lib/iomap.c:274: error: implicit declaration of function 'ioremap_nocache'
lib/iomap.c:274: warning: return makes pointer from integer without a castAlso see commit
it will hide the ioremap_nocache function for systems with an MMUSigned-off-by: Guan Xuetao
Cc: Arnd Bergmann
Cc: Jonas Bonn -
For the commit has changed
xlate_dev_mem_ptr definition in asm-generic/io.h for the systems with
an MMU, so delete it from unicore32 specified io.h.Signed-off-by: Guan Xuetao
Cc: Arnd Bergmann
Cc: Jonas Bonn -
All other ports use "Kernel code" to identify the Kernel text segment
in /proc/iomem. Change the unicore32 resources to do the same.Signed-off-by: Kees Cook
Acked-by: Arnd Bergmann
09 Jan, 2012
1 commit
-
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
PM / Hibernate: Implement compat_ioctl for /dev/snapshot
PM / Freezer: fix return value of freezable_schedule_timeout_killable()
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
...Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
08 Jan, 2012
1 commit
-
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
arm: fix up some samsung merge sysdev conversion problems
firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
Drivers:hv: Fix a bug in vmbus_driver_unregister()
driver core: remove __must_check from device_create_file
debugfs: add missing #ifdef HAS_IOMEM
arm: time.h: remove device.h #include
driver-core: remove sysdev.h usage.
clockevents: remove sysdev.h
arm: convert sysdev_class to a regular subsystem
arm: leds: convert sysdev_class to a regular subsystem
kobject: remove kset_find_obj_hinted()
m86k: gpio - convert sysdev_class to a regular subsystem
mips: txx9_sram - convert sysdev_class to a regular subsystem
mips: 7segled - convert sysdev_class to a regular subsystem
sh: dma - convert sysdev_class to a regular subsystem
sh: intc - convert sysdev_class to a regular subsystem
power: suspend - convert sysdev_class to a regular subsystem
power: qe_ic - convert sysdev_class to a regular subsystem
power: cmm - convert sysdev_class to a regular subsystem
s390: time - convert sysdev_class to a regular subsystem
...Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
- arch/arm/mach-exynos/cpu.c
- arch/arm/mach-exynos/irq-eint.c
- arch/arm/mach-s3c64xx/common.c
- arch/arm/mach-s3c64xx/cpu.c
- arch/arm/mach-s5p64x0/cpu.c
- arch/arm/mach-s5pv210/common.c
- arch/arm/plat-samsung/include/plat/cpu.h
- arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
07 Jan, 2012
3 commits
-
This patch converts UniCore's architecture-specific
'pcibios_set_master()' routine to a non-inlined function. This will
allow follow on patches to create a generic 'pcibios_set_master()'
function using the '__weak' attribute which can be used by all
architectures as a default which, if necessary, can then be over-
ridden by architecture-specific code.Converting 'pci_bios_set_master()' to a non-inlined function will
allow UniCore's 'pcibios_set_master()' implementation to remain
architecture-specific after the generic version is introduced and
thus, not change current behavior.No functional change.
Signed-off-by: Myron Stowe
Signed-off-by: Jesse Barnes -
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.The microcode_core.c patch was provided by Stephen Rothwell
who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.Signed-off-by: Greg Kroah-Hartman
-
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
cpu: Export cpu_up()
rcu: Apply ACCESS_ONCE() to rcu_boost() return value
Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
docs: Additional LWN links to RCU API
rcu: Augment rcu_batch_end tracing for idle and callback state
rcu: Add rcutorture tests for srcu_read_lock_raw()
rcu: Make rcutorture test for hotpluggability before offlining CPUs
driver-core/cpu: Expose hotpluggability to the rest of the kernel
rcu: Remove redundant rcu_cpu_stall_suppress declaration
rcu: Adaptive dyntick-idle preparation
rcu: Keep invoking callbacks if CPU otherwise idle
rcu: Irq nesting is always 0 on rcu_enter_idle_common
rcu: Don't check irq nesting from rcu idle entry/exit
rcu: Permit dyntick-idle with callbacks pending
rcu: Document same-context read-side constraints
rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
rcu: Remove dynticks false positives and RCU failures
rcu: Reduce latency of rcu_prepare_for_idle()
rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
rcu: Avoid needlessly IPIing CPUs at GP end
...
22 Dec, 2011
1 commit
-
The sysdev.h file should not be needed by any in-kernel code, so remove
the .h file from these random files that seem to still want to include
it.The sysdev code will be going away soon, so this include needs to be
removed no matter what.Cc: Jiandong Zheng
Cc: Scott Branden
Cc: Russell King
Cc: Kukjin Kim
Cc: David Brown
Cc: Daniel Walker
Cc: Bryan Huntsman
Cc: Ben Dooks
Cc: Wan ZongShun
Cc: Haavard Skinnemoen
Cc: Hans-Christian Egtvedt
Cc: Guan Xuetao
Cc: "Venkatesh Pallipadi
Cc: Thomas Gleixner
Cc: Ingo Molnar
Cc: "H. Peter Anvin"
Cc: Grant Likely
Cc: Richard Purdie
Cc: Matthew Garrett
Signed-off-by: Kay Sievers
12 Dec, 2011
3 commits
-
Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.Signed-off-by: Frederic Weisbecker
Cc: Ingo Molnar
Cc: Thomas Gleixner
Cc: Peter Zijlstra
Reviewed-by: Josh Triplett
Signed-off-by: Paul E. McKenney -
It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.Signed-off-by: Frederic Weisbecker
Cc: Mike Frysinger
Cc: Guan Xuetao
Cc: David Miller
Cc: Chris Metcalf
Cc: Hans-Christian Egtvedt
Cc: Ralf Baechle
Cc: Paul E. McKenney
Cc: Ingo Molnar
Cc: Peter Zijlstra
Cc: Thomas Gleixner
Cc: H. Peter Anvin
Cc: Russell King
Cc: Paul Mackerras
Cc: Heiko Carstens
Cc: Paul Mundt
Signed-off-by: Paul E. McKenney -
The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.Split this function into:
- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.Signed-off-by: Frederic Weisbecker
Cc: Mike Frysinger
Cc: Guan Xuetao
Cc: David Miller
Cc: Chris Metcalf
Cc: Hans-Christian Egtvedt
Cc: Ralf Baechle
Cc: Paul E. McKenney
Cc: Ingo Molnar
Cc: Peter Zijlstra
Cc: Thomas Gleixner
Cc: H. Peter Anvin
Cc: Russell King
Cc: Paul Mackerras
Cc: Heiko Carstens
Cc: Paul Mundt
Signed-off-by: Paul E. McKenney
Reviewed-by: Josh Triplett
09 Dec, 2011
3 commits
-
The only function of memblock_analyze() is now allowing resize of
memblock region arrays. Rename it to memblock_allow_resize() and
update its users.* The following users remain the same other than renaming.
arm/mm/init.c::arm_memblock_init()
microblaze/kernel/prom.c::early_init_devtree()
powerpc/kernel/prom.c::early_init_devtree()
openrisc/kernel/prom.c::early_init_devtree()
sh/mm/init.c::paging_init()
sparc/mm/init_64.c::paging_init()
unicore32/mm/init.c::uc32_memblock_init()* In the following users, analyze was used to update total size which
is no longer necessary.powerpc/kernel/machine_kexec.c::reserve_crashkernel()
powerpc/kernel/prom.c::early_init_devtree()
powerpc/mm/init_32.c::MMU_init()
powerpc/mm/tlb_nohash.c::__early_init_mmu()
powerpc/platforms/ps3/mm.c::ps3_mm_add_memory()
powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups()
sh/kernel/machine_kexec.c::reserve_crashkernel()* x86/kernel/e820.c::memblock_x86_fill() was directly setting
memblock_can_resize before populating memblock and calling analyze
afterwards. Call memblock_allow_resize() before start populating.memblock_can_resize is now static inside memblock.c.
Signed-off-by: Tejun Heo
Cc: Benjamin Herrenschmidt
Cc: Yinghai Lu
Cc: Russell King
Cc: Michal Simek
Cc: Paul Mundt
Cc: "David S. Miller"
Cc: Guan Xuetao
Cc: "H. Peter Anvin" -
memblock_init() initializes arrays for regions and memblock itself;
however, all these can be done with struct initializers and
memblock_init() can be removed. This patch kills memblock_init() and
initializes memblock with struct initializer.The only difference is that the first dummy entries don't have .nid
set to MAX_NUMNODES initially. This doesn't cause any behavior
difference.Signed-off-by: Tejun Heo
Cc: Benjamin Herrenschmidt
Cc: Yinghai Lu
Cc: Russell King
Cc: Michal Simek
Cc: Paul Mundt
Cc: "David S. Miller"
Cc: Guan Xuetao
Cc: "H. Peter Anvin" -
24aa07882b (memblock, x86: Replace memblock_x86_reserve/free_range()
with generic ones) removed arch/x86/include/asm/memblock.h and dropped
its inclusion from include/linux/memblock.h which breaks other
architectures which depended on the generic memblock.h pulling in the
arch specific one.However, the proper fix isn't adding back the asm inclusion. memblock
doesn't have any arch dependent part and doesn't need arch specific
header file and asm/memblock.h files are either practically empty or
contain mostly unrelated arch specific stuff.* In microblaze, sh, powerpc, sparc and openrisc, asm/memblock.h is
either empty or just contains unused MEMBLOCK_DBG() macro. Remove
them.* In arm and unicore32, asm/memblock.h contains arch specific stuff.
Include it directly from its users. It might be a good idea to
rename the header file to avoid confusion.Signed-off-by: Tejun Heo
Reported-by: "H. Peter Anvin"
Cc: Yinghai Lu
Cc: Russell King
Cc: Michal Simek
Cc: Benjamin Herrenschmidt
Cc: Paul Mundt
Cc: "David S. Miller"
Cc: Guan Xuetao
25 Nov, 2011
1 commit
-
define GENERIC_IOMAP in a central location
instead of all architectures. This will be helpful
for the follow-up patch which makes it select
other configs. Code is also a bit shorter this way.Signed-off-by: Michael S. Tsirkin
22 Nov, 2011
1 commit
-
Signed-off-by: Tejun Heo
Cc: Arnd Bergmann
Cc: linux-arch@vger.kernel.org
16 Nov, 2011
2 commits
-
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.Signed-off-by: Mathias Krause
Cc: Guan Xuetao
Signed-off-by: Andrew Morton
Acked-by: Guan Xuetao -
Signed-off-by: Paul Bolle
Acked-by: Guan Xuetao
15 Nov, 2011
3 commits
-
Signed-off-by: Paul Bolle
Acked-by: Guan Xuetao -
Usage of these flags has been deprecated for nearly 4 years by:
commit f77bf01425b11947eeb3b5b54685212c302741b8
Author: Sam Ravnborg
Date: Mon Oct 15 22:25:06 2007 +0200kbuild: introduce ccflags-y, asflags-y and ldflags-y
Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command
line use. By default, gmake(1) do not override command line setting, so this is
likely to result in build failure or unexpected behavior.Replace their usage by Kbuild's `{as,cc,ld}flags-y'.
Cc: Sam Ravnborg
Cc: Guan Xuetao
Signed-off-by: Arnaud Lacombe
Acked-by: Guan Xuetao -
Remove the __uc32_ prefix in find bitops functions.
Move find_* macros behind asm-generic/bitops.h inclusion.
see commit
bitops: add #ifndef for each of find bitops
also see commit
arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}Signed-off-by: Guan Xuetao
Cc: Akinobu Mita
Acked-by: Akinobu Mita
Cc: Arnd Bergmann
01 Nov, 2011
1 commit
-
Include export.h to fix below warning:
CC arch/unicore32/mm/init.o
arch/unicore32/mm/init.c:227: warning: data definition has no type or storage class
arch/unicore32/mm/init.c:227: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/unicore32/mm/init.c:227: warning: parameter names (without types) in function declarationSigned-off-by: Axel Lin
Signed-off-by: Paul Gortmaker
28 Sep, 2011
1 commit
-
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.Fix these broken references, sometimes by dropping the irrelevant text
they were part of.Signed-off-by: Paul Bolle
Signed-off-by: Jiri Kosina
30 Jul, 2011
1 commit
-
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: remove printks about disabled bridge windows
PCI: fold pci_calc_resource_flags() into decode_bar()
PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR
PCI: correct pcie_set_readrq write size
PCI: pciehp: change wait time for valid configuration access
x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems
PCI: ARI is a PCIe v2 feature
x86/PCI: quirks: Use pci_dev->revision
PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.
PCI hotplug: cpqphp: use pci_dev->vendor
PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device}
x86/PCI: config space accessor functions should not ignore the segment argument
PCI: Assign values to 'pci_obff_signal_type' enumeration constants
x86/PCI: reduce severity of host bridge window conflict warnings
PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI
PCI: PCIe AER: add aer_recover_queue
x86/PCI: select direct access mode for mmconfig option
PCI hotplug: Rename is_ejectable which also exists in dock.c
24 Jul, 2011
1 commit
-
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.Signed-off-by: Jonas Bonn
Acked-by: Mike Frysinger
Acked-by: Geert Uytterhoeven
Tested-by: Michal Simek
Signed-off-by: Rusty Russell
22 Jul, 2011
1 commit
-
Aside of the usual motivation for constification, this function has a
history of being abused a hook for interrupt and other fixups so I turned
this function const ages ago in the MIPS code but it should be done
treewide.Due to function pointer passing in varous places a few other functions
had to be constified as well.Signed-off-by: Ralf Baechle
To: Anton Vorontsov
To: Chris Metcalf
To: Colin Cross
Acked-by: "David S. Miller"
To: Eric Miao
To: Erik Gilling
Acked-by: Guan Xuetao
To: "H. Peter Anvin"
To: Imre Kaloz
To: Ingo Molnar
To: Ivan Kokshaysky
To: Jesse Barnes
To: Krzysztof Halasa
To: Lennert Buytenhek
To: Matt Turner
To: Nicolas Pitre
To: Olof Johansson
Acked-by: Paul Mundt
To: Richard Henderson
To: Russell King
To: Thomas Gleixner
Cc: Andrew Morton
Cc: linux-alpha@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Jesse Barnes
09 Jun, 2011
5 commits
-
The patch adds one-line asm-generic files in arch/unicore32/include/asm/Kbuild
Also, remove the old implementation in arch/unicore32/Makefile
see commit from Sam Ravnborg
kbuild: asm-generic supportSigned-off-by: Guan Xuetao
Acked-by: Arnd Bergmann -
The patch changes PERCPU to PERCPU_SECTION
see commit from Tejun Heo
percpu: Always align percpu output section to PAGE_SIZESigned-off-by: Guan Xuetao
Acked-by: Tejun Heo -
Rename debug_defconfig to unicore32_defconfig, which is a minimal config for
PKUnity-v3 (130nm) SoC board.
Also, add KBUILD_DEFCONFIG to use 'make defconfig'.Signed-off-by: Guan Xuetao
Acked-by: Arnd Bergmann -
U-boot will load the kernel image to 48M physical memory address.
The patch changes it to the correct address, though it's PIC codes.Signed-off-by: Guan Xuetao
Acked-by: Arnd Bergmann -
The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/
to drivers/rtc/, with renaming it to rtc-puv3.c.
Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly.Signed-off-by: Guan Xuetao
Acked-by: Arnd Bergmann
28 May, 2011
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM: Fix PM QOS's user mode interface to work with ASCII input
PM / Hibernate: Update kerneldoc comments in hibernate.c
PM / Hibernate: Remove arch_prepare_suspend()
PM / Hibernate: Update some comments in core hibernate code
25 May, 2011
3 commits
-
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it
to lib/Kconfig.debug so each arch doesn't have to define it. This
obviously makes the option generic, but that's fine because the config is
already used in generic code.It's not obvious to me that sysrq-P actually does anything caution by
keeping the most inclusive wording.Signed-off-by: Stephen Boyd
Cc: Chris Metcalf
Acked-by: David S. Miller
Acked-by: Richard Weinberger
Acked-by: Mike Frysinger
Cc: Russell King
Cc: Hirokazu Takata
Acked-by: Ralf Baechle
Cc: Paul Mackerras
Acked-by: Benjamin Herrenschmidt
Cc: Chen Liqin
Cc: Lennox Wu
Cc: Ingo Molnar
Cc: Thomas Gleixner
Cc: "H. Peter Anvin"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fold all the mmu_gather rework patches into one for submission
Signed-off-by: Peter Zijlstra
Reported-by: Hugh Dickins
Cc: Benjamin Herrenschmidt
Cc: David Miller
Cc: Martin Schwidefsky
Cc: Russell King
Cc: Paul Mundt
Cc: Jeff Dike
Cc: Richard Weinberger
Cc: Tony Luck
Cc: KAMEZAWA Hiroyuki
Cc: Mel Gorman
Cc: KOSAKI Motohiro
Cc: Nick Piggin
Cc: Namhyung Kim
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Architectures that implement their own show_mem() function did not pass
the filter argument to show_free_areas() to appropriately avoid emitting
the state of nodes that are disallowed in the current context. This patch
now passes the filter argument to show_free_areas() so those nodes are now
avoided.This patch also removes the show_free_areas() wrapper around
__show_free_areas() and converts existing callers to pass an empty filter.ia64 emits additional information for each node, so skip_free_areas_zone()
must be made global to filter disallowed nodes and it is converted to use
a nid argument rather than a zone for this use case.Signed-off-by: David Rientjes
Cc: Russell King
Cc: Tony Luck
Cc: Fenghua Yu
Cc: Kyle McMartin
Cc: Helge Deller
Cc: James Bottomley
Cc: "David S. Miller"
Cc: Guan Xuetao
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds