09 Jan, 2012
1 commit
-
TWL family of PMICs, used in master mode, have a power off
functionality. The resulting power off sequence shuts down all the SoC
supplies, LDOs, etc. The sequence is described in the datasheets
chapter "Power-Off Sequence".
Note, that board must be wired correctly for the power off to work as
expected.Signed-off-by: Igor Grinberg
Signed-off-by: Samuel Ortiz
04 Nov, 2011
1 commit
-
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits)
mfd: Fix missing abx500 header file updates
mfd: Add missing include to intel_msic
x86, mrst: add platform support for MSIC MFD driver
mfd: Expose TurnOnStatus in ab8500 sysfs
mfd: Remove support for early drop ab8500 chip
mfd: Add support for ab8500 v3.3
mfd: Add ab8500 interrupt disable hook
mfd: Convert db8500-prcmu panic() into pr_crit()
mfd: Refactor db8500-prcmu request_clock() function
mfd: Rename db8500-prcmu init function
mfd: Fix db5500-prcmu defines
mfd: db8500-prcmu voltage domain consumers additions
mfd: db8500-prcmu reset code retrieval
mfd: db8500-prcmu tweak for modem wakeup
mfd: Add db8500-pcmu watchdog accessor functions for watchdog
mfd: hwacc power state db8500-prcmu accessor
mfd: Add db8500-prcmu accessors for PLL and SGA clock
mfd: Move to the new db500 PRCMU API
mfd: Create a common interface for dbx500 PRCMU drivers
mfd: Initialize DB8500 PRCMU regs
...Fix up trivial conflicts in
arch/arm/mach-imx/mach-mx31moboard.c
arch/arm/mach-omap2/board-omap3beagle.c
arch/arm/mach-u300/include/mach/irqs.h
drivers/mfd/wm831x-spi.c
24 Oct, 2011
1 commit
-
Without turning the MADC clock on, no MADC conversions occur.
$ cat /sys/class/hwmon/hwmon0/device/in8_input
[ 53.428436] twl4030_madc twl4030_madc: conversion timeout!
cat: read error: Resource temporarily unavailableSigned-off-by: Kyle Manna
Signed-off-by: Samuel Ortiz
12 Oct, 2011
1 commit
-
Abort driver initialization if X plate resistance was not specified in
platform data as it will cause pressure to be always calculated as 0,
and making userspace ignore touch coordinates.Signed-off-by: Philip Rakity
Signed-off-by: Dmitry Torokhov
18 Jul, 2011
1 commit
-
…/linux/kernel/git/arm/linux-arm-soc into next/devel-2
05 Jul, 2011
3 commits
-
Enable ramp down/up step to be configured based on
platform.Signed-off-by: Axel Castaneda Gonzalez
Signed-off-by: Misael Lopez Cruz
Signed-off-by: Peter Ujfalusi
Acked-by: Mark Brown -
Add twl6040_vibra as a child of MFD device twl6040_codec. This
implementation covers the PCM-to-PWM mode of TWL6040 vibrator
module.Signed-off-by: Misael Lopez Cruz
Signed-off-by: Peter Ujfalusi
CC: Tejun Heo
Acked-by: Dmitry Torokhov -
TWL6040 IC provides analog high-end audio codec functions for
handset applications. It contains several audio analog inputs
and outputs as well as vibrator support. It's connected to the
host processor via PDM interface for audio data communication.
The audio modules are controlled by internal registers that
can be accessed by I2C and PDM interface.TWL6040 MFD will be registered as a child of TWL-CORE, and will
have two children of its own: twl6040-codec and twl6040-vibra.This driver is based on TWL4030 and WM8350 MFD drivers.
Signed-off-by: Misael Lopez Cruz
Signed-off-by: Peter Ujfalusi
Acked-by: Samuel Ortiz
04 Jul, 2011
1 commit
-
Allign the platform data names for twl4030 audio submodule:
twl4030_audio_data: for the core MFD driver
twl4030_codec_data: for ASoC codec driver
twl4030_vibra_data: for the input/ForceFeedback driverTo avoid breakage, change all depending drivers, files
to use the new types.Signed-off-by: Peter Ujfalusi
Acked-by: Samuel Ortiz
16 Jun, 2011
1 commit
-
Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
Cc: Richard Purdie
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 May, 2011
4 commits
-
The charger fault IRQs from the twl will in future patches be handled
by a seperate IRQ handler in the charger driver than the general charger
IRQ. Give them different IRQ numbers now to allow the charger driver to
be merged in the future.Signed-off-by: Graeme Gregory
Signed-off-by: Samuel Ortiz -
Phoenix Lite is based on the twl6030 family of PMICs. It has mostly the
same feature set of twl6030 but with small changes. The codec block has
also been removed. It also has a new charger block and new features in
its ADC block. VUSB handling also differs.Signed-off-by: Graeme Gregory
Reviewed-by: Mark Brown
Signed-off-by: Samuel Ortiz -
Added API to get the TWL5030 Si version from the IDCODE register.
It is used for enabling the workaround for TWL erratum 27.Signed-off-by: Lesly A M
Cc: Nishanth Menon
Cc: David Derrick
Signed-off-by: Samuel Ortiz -
Modifying the macro name Main_Ref to all caps(MAIN_REF).
Suggested by Nishanth Menon
Signed-off-by: Lesly A M
Cc: Nishanth Menon
Cc: David Derrick
Signed-off-by: Samuel Ortiz
25 May, 2011
1 commit
-
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits)
mach-ux500: set proper I2C platform data from MOP500s
i2c-nomadik: break out single messsage transmission
i2c-nomadik: reset the hw after status check
i2c-nomadik: remove the unnecessary delay
i2c-nomadik: change the TX and RX threshold
i2c-nomadik: add code to retry on timeout failure
i2c-nomadik: use pm_runtime API
i2c-nomadik: print abort cause only on abort tag
i2c-nomadik: correct adapter timeout initialization
i2c-nomadik: remove the redundant error message
i2c-nomadik: corrrect returned error numbers
i2c-nomadik: fix speed enumerator
i2c-nomadik: make i2c timeout specific per i2c bus
i2c-nomadik: add regulator support
i2c: i2c-sh_mobile bus speed platform data V2
i2c: i2c-sh_mobile clock string removal
i2c-eg20t: Support new device ML7223 IOH
i2c: tegra: Add de-bounce cycles.
i2c: tegra: fix repeated start handling
i2c: tegra: recover from spurious interrupt storm
...
18 May, 2011
4 commits
-
These new platform-specific values can be used to set the fuzz parameter
passed to the input_set_abs_params() function for the ABS_X, ABS_Y and
ABS_PRESSURE axes.Signed-off-by: Thierry Reding
Signed-off-by: Dmitry Torokhov -
This new parameter allows the polling frequency to be configured while
keeping the default of once every millisecond.Signed-off-by: Thierry Reding
Signed-off-by: Dmitry Torokhov -
Depending on the quality of the touch panel, the time for the X-, X+, Y-
and Y+ inputs to settle may vary. The poll_delay parameter can be used
to override the default of 1 millisecond.Cc: Dmitry Torokhov
Cc: Kwangwoo Lee
Signed-off-by: Thierry Reding
Signed-off-by: Dmitry Torokhov -
Finger touch events or very quick stylus events on low-quality panels
can cause the tsc2007 to read bogus values. Looking at oscilloscope
snapshots, this seems to be caused by the touch event disappearing
during the measurements. These bogus values result in misclicks, where
the X and Y values deviate from the real position.Most of these misclicks can be filtered out by setting a low enough
threshold for the maximum resistance (which is loosely the inverse of
the pressure) allowed to consider a set of values valid. Since this
behaviour is largely dependent on the type and quality of the panel,
this commit introduces the max_rt parameter. The default value is kept
at MAX_12BIT.Signed-off-by: Thierry Reding
Signed-off-by: Dmitry Torokhov
12 May, 2011
1 commit
-
This patch adds basic support for Freescale MPR121 capacitive touch
sensor. It's an i2c controller with up to 12 capacitance sensing inputs.Product information (data sheet, application notes) can be found here:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121Signed-off-by: Zhang Jiejing
Signed-off-by: Dmitry Torokhov
11 May, 2011
1 commit
-
Add support to the i2c-sh_mobile driver for setting
the I2C bus speed using platform data.Signed-off-by: Magnus Damm
Signed-off-by: Ben Dooks
23 Mar, 2011
3 commits
-
Introducing a driver for MADC on TWL4030 powerIC. MADC stands for monitoring
ADC. This driver monitors the real time conversion of analog signals like
battery temperature, battery cuurent etc.Signed-off-by: Keerthy
Signed-off-by: Samuel Ortiz -
In OMAP4 Blaze and Panda, 32KHz clock to WLAN is supplied from Phoenix
TWL6030. The 32KHz clock state (ON/OFF) is configured in
CLK32KG_CFG_[GRP, TRANS, STATE] register. This follows the same register
programming model as other regulators in TWL6030. So add CLK32KG as pseudo
regulator.Signed-off-by: Balaji T K
Acked-by: Mark Brown
Signed-off-by: Samuel Ortiz -
* 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux:
i2c-pxa2xx: Don't clear isr bits too early
i2c-pxa2xx: Fix register offsets
i2c-pxa2xx: pass of_node from platform driver to adapter and publish
i2c-pxa2xx: check timeout correctly
i2c-pxa2xx: add support for shared IRQ handler
i2c-pxa2xx: Add PCI support for PXA I2C controller
ARM: pxa2xx: reorganize I2C files
i2c-pxa2xx: use dynamic register layout
i2c-mxs: set controller to pio queue mode after reset
i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH
i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
22 Mar, 2011
2 commits
-
Configuration for ads1015 gain and datarate is possible via
devicetree or platform data.This is a followup patch to previous ads1015 patches on Jean Delvares
tree.Signed-off-by: Dirk Eibach
Signed-off-by: Jean Delvare -
Signed-off-by: Dirk Eibach
Signed-off-by: Jean Delvare
21 Mar, 2011
1 commit
-
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
pxa910_defconfigSigned-off-by: Sebastian Andrzej Siewior
Signed-off-by: Dirk Brandewie
Signed-off-by: Ben Dooks
20 Mar, 2011
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
Input: tsc2005 - remove 'disable' sysfs attribute
Input: tsc2005 - add open/close
Input: tsc2005 - handle read errors from SPI layer
Input: tsc2005 - do not rearm timer in hardirq handler
Input: tsc2005 - don't use work for 'pen up' handling
Input: tsc2005 - do not use 0 in place of NULL
Input: tsc2005 - use true/false for boolean variables
Input: tsc2005 - hide selftest attribute if we can't reset
Input: tsc2005 - rework driver initialization code
Input: tsc2005 - set up bus type in input device
Input: tsc2005 - set up parent device
Input: tsc2005 - clear driver data after unbinding
Input: tsc2005 - add module description
Input: tsc2005 - remove driver banner message
Input: tsc2005 - remove incorrect module alias
Input: tsc2005 - convert to using dev_pm_ops
Input: tsc2005 - use spi_get/set_drvdata()
Input: introduce tsc2005 driver
Input: xen-kbdfront - move to drivers/input/misc
Input: xen-kbdfront - add grant reference for shared page
...
18 Mar, 2011
2 commits
-
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
omap: zoom: host should not pull up wl1271's irq line
arm: plat-omap: iommu: fix request_mem_region() error path
OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
omap4: mux: Remove duplicate mux modes
omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
omap4: board-omap4panda: Initialise the serial pads
omap3: board-3430sdp: Initialise the serial pads
omap4: board-4430sdp: Initialise the serial pads
omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
omap2+: mux: Remove the use of IDLE flag
omap2+: Add separate list for dynamic pads to mux
perf: add OMAP support for the new power events
OMAP4: Add IVA OPP enteries.
OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
OMAP3+: OPP: Replace voltage values with Macros
OMAP3: wdtimer: Fix CORE idle transition
Watchdog: omap_wdt: add fine grain runtime-pm
...Fix up various conflicts in
- arch/arm/mach-omap2/board-omap3evm.c
- arch/arm/mach-omap2/clock3xxx_data.c
- arch/arm/mach-omap2/usb-musb.c
- arch/arm/plat-omap/include/plat/usb.h
- drivers/usb/musb/musb_core.h -
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits)
hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributes
hwmon/f71882fg: Add support for f71808e
hwmon/f71882fg: Add support for f71869f and f71869e
hwmon/f71882fg: Add support for f71889ed
hwmon/f71882fg: Break out test for auto pwm's controlled by digital readings
hwmon/f71882fg: Separate temp beep sysfs attr from the other temp sysfs attr
hwmon/f71882fg: Remove bogus temp2_type for certain models
hwmon/f71882fg: Make number of temps configurable
hwmon/f71882fg: Make creation of in sysfs attributes more generic
hwmon/f71882fg: Only allow negative auto point temps if fan_neg_temp is enabled
hwmon/f71882fg: Fix temp1 sensor type reporting
hwmon: (w83627ehf) Display correct temperature sensor labels for systems with NCT6775F
hwmon: (w83627ehf) Add fan debounce support for NCT6775F and NCT6776F
hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F
hwmon: (w83627ehf) Store rpm instead of raw fan speed data
hwmon: (w83627ehf) Use 16 bit fan count registers if supported
hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F
hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup
hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers
hwmon: (w83627ehf) Remove references to datasheets which no longer exist
...
15 Mar, 2011
2 commits
-
This driver adds support for hardware monitoring features of various PMBus
devices.Signed-off-by: Guenter Roeck
Acked-by: Jonathan Cameron -
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller
Signed-off-by: Roland Stigge
Signed-off-by: Guenter Roeck
03 Mar, 2011
1 commit
-
audio_mclk can be queried from mfd driver. Therefore, it is not
needed in twl4030_codec_audio_data or in twl4030_codec_vibra_data
anymore.Signed-off-by: Ilkka Koskinen
Acked-by: Peter Ujfalusi
Acked-by: Mark Brown
Acked-by: Samuel Ortiz
Signed-off-by: Tony Lindgren
24 Feb, 2011
1 commit
-
This adds support for system-level suspend/resume to the driver.
Signed-off-by: Heungjun Kim
Signed-off-by: Kyungmin Park
Signed-off-by: Dmitry Torokhov
21 Feb, 2011
4 commits
-
Different board have different requirements/setups so let's be more
flexible.Signed-off-by: Iiro Valkonen
Signed-off-by: Dmitry Torokhov -
As there is no common configuration settings that would work in every
situation, remove the fixed config data from driver code and add
config data to platform data.Signed-off-by: Iiro Valkonen
Signed-off-by: Dmitry Torokhov -
Change prefixes from qt602240 to mxt to reflect that the driver supports
whole line of mXT touchscreens.Signed-off-by: Iiro Valkonen
Signed-off-by: Dmitry Torokhov -
Since the driver will be supporting whole range of Atmels mXT touchscreen
controllers we better rename it to atmel_mxt_ts.Acked-by: Iiro Valkonen
Signed-off-by: Dmitry Torokhov
18 Feb, 2011
1 commit
-
Declare the .phy_suspend function pointer to twl4030_usb_data structure.
OMAP internal phy suspend function will be hooked though this function
pointer to use in the transceiver driver.Signed-off-by: Hema HK
Cc: Tony Lindgren
Cc: Paul Walmsley
Signed-off-by: Felipe Balbi
10 Jan, 2011
1 commit
-
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat
Signed-off-by: Roland Stigge
Signed-off-by: Guenter Roeck