25 Mar, 2006
26 commits
-
- implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio
- use the new command in bttv, pvrusb2 and em28xx.
- remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!)
- remove the obsolete VIDIOC_S_AUDIO from msp3400.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Moved msp3400.h to msp3400-driver.h.
Created media/msp3400.h with the new routing defines and lots of comments.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Lots of cleanups:
- remove duplicate actions
- add D/K3 Dual FM-Stereo and D/K NICAM FM (HDEV3) support
- put prescales in the proper place
- add missing D/K NICAM
- msp34xxg_reset now only resets instead of also starting the autodetect
(moved that to msp34xxg_thread)
- fix support for SAP.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
msp_modus is 'G' model specific. Moved it to kthreads and also added proper
handling for the Japanese and South Korean TV standards.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
For the new routing implementation it is easier if all the 'normal'
scart inputs (IN1-IN4) are consecutive.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Cleanup audio input handling in bttv and tvaudio:
- inputs were specified that were never used
- mute was handled as a special input which led to confusing code
- confusing naming made it difficult to see if the setting was for
i2c or gpio.
The old audiochip.h input names moved to tvaudio.h. Currently this
is used both by tvaudio and msp3400 until the msp3400 implements the
new msp3400-specific inputs.
Detect in bttv the tvaudio and msp3400 i2c clients and use these
client pointers to set the inputs directly instead of broadcasting the
command.
Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be
replaced again later by the new ROUTING commands.
Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is
a user level command and not to be used internally. It wasn't called at
all anyway.Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
Only the Medion boxes return 0x08 after an i2c read/write.
The bluebird devices do not return anything at all.
This patch conditionalizes the test for the 0x08 return code
to produce a warning message when using the Medion box, only.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
- corrects the wording in some of the debug messages.
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
Removed the FIXME comment from bluebird_patch_dvico_firmware_download:
/* FIXME: are we allowed to change the fw-data ? */
Yes, we are allowed. DViCO's Windows driver also does the same thing.
A single firmware image is used to support all of the bluebird boxes.
The firmware sets all devices to PID: d700. Instead of using that, the
driver replaces the d700 with the cold PID+1 before the download.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
This patch removes the (harmless) -ETIMEDOUT during device init
for the DViCO FusionHDTV Bluebird boxes, by conditionalizing the
gpio write inside cxusb_i2c_xfer to happen only for Medion boxes.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
On ppc64, u64 is `unsigned long'
drivers/media/video/v4l2-common.c: In function `v4l_printk_ioctl_arg':
drivers/media/video/v4l2-common.c:486: warning: cast from pointer to integer of different size
drivers/media/video/v4l2-common.c:580: warning: long long int format, v4l2_std_id arg (arg 8)
drivers/media/video/v4l2-common.c:625: warning: long long int format, v4l2_std_id arg (arg 8)
drivers/media/video/v4l2-common.c:693: warning: long long int format, v4l2_std_id arg (arg 4)
drivers/media/video/v4l2-common.c:910: warning: long long unsigned int format, long unsigned int a$Signed-off-by: Andrew Morton
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Alan Cox
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Hans Verkuil
Signed-off-by: Mauro Carvalho Chehab -
There was no MODULE_DEVICE_TABLE for the b2c2-flexcop-usb module. This makes it
impossible for hotplug to load the module automatically, when such a device is
connected.Signed-off-by: Patrick Boettcher
Signed-off-by: Mauro Carvalho Chehab -
I2C_foo were used for some i2c addresses. Bad, since those constants could
mean other i2c chip things.Signed-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
- Missing a Makefile for bt8xx
- rds.h were at wrong directory, since it is a global header for an internal
interface
- tda7432 and tda9875 were dependent from bttv.h
- bttv.h were holding i2c addressesSigned-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Manu Abraham
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Manu Abraham
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Mauro Carvalho Chehab
-
The Virtual Video Device Driver (aka vivi) is a device that
can be used to:
1) test core v4l functionalities;
2) be a prototype for newer development.
Vivi were developed using the best practices for v4l driver.
When loaded, it provides a video device that generates a
standard color bar, with a timestamp placed at top left corner.Signed-off-by: Mauro Carvalho Chehab
-
Video_buf were concerned to allow PCI devices to be used as
video capture devices. This patch extends video_buf features
by virtualizing pci-dependent functions and allowing other
type of devices to use it.
It is still DMA centric, although it may be used also by
devices that emulates scatter/gather behavior or a DMA deviceSigned-off-by: Mauro Carvalho Chehab
-
net: ne2k.c won't compile if pci_clone_list is const
f71e130966ba429dbd24be08ddbcdf263df9a5ad which (amongst other things)
made pci_clone_list in ne2k-pci.c const causes the following compile error.
This patch reverses that portion of that changesetdrivers/net/ne2k-pci.c:123: error: pci_clone_list causes a section type
conflict~/ gcc --version
gcc (GCC) 4.0.3 (Debian 4.0.3-1)
~/ dpkg gcc-4.0 | grep Version
Version: 4.0.3-1Signed-Off-By: Horms
-
This patch adds support for the Ethernet controller integrated in the
Atmel AT91RM9200 SoC processor.Changes since the previous submission (01/02/2006) are:
- Make use of the clk.h clock infrastructure.
- The multicast hash function is not crc32. [Patch by Pedro Perez]Signed-off-by: Andrew Victor
Signed-off-by: Jeff Garzik -
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[PATCH] libata: Remove dependence on host_set->dev for SAS
[PATCH] libata: ata_scsi_ioctl cleanup
[PATCH] libata: ata_scsi_queuecmd cleanup
[libata] export ata_dev_pair; trim trailing whitespace
[PATCH] libata: add ata_dev_pair helper
[PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.
[PATCH] libata: make ata_set_mode() responsible for failure handling
[PATCH] libata: use ata_dev_disable() in ata_bus_probe()
[PATCH] libata: implement ata_dev_disable()
[PATCH] libata: check if port is disabled after internal command
[PATCH] libata: make per-dev transfer mode limits per-dev
[PATCH] libata: add per-dev pio/mwdma/udma_mask
[PATCH] libata: implement ata_unpack_xfermask()
[libata] Move some bmdma-specific code to libata-bmdma.c
[libata sata_uli] kill scr_addr abuse
[libata sata_nv] eliminate duplicate codepaths with iomap
[libata sata_nv] cleanups: convert #defines to enums; remove in-file history
[libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
24 Mar, 2006
14 commits
-
uevent_seqnum and uevent_helper are only defined if CONFIG_HOTPLUG=y,
CONFIG_NET=n.(I stole this back from Greg's tree - it makes allnoconfig work).
Cc: Greg KH
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Copies user-space string with strndup_user() and moves the type string
duplication code to a function (thus fixing a wrong check on the length of the
type.)Signed-off-by: Davi Arnaut
Cc: David Howells
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Change hand-coded userspace string copying to strndup_user.
Signed-off-by: Davi Arnaut
Cc: David Howells
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch series creates a strndup_user() function to easy copying C strings
from userspace. Also we avoid common pitfalls like userspace modifying the
final \0 after the strlen_user().Signed-off-by: Davi Arnaut
Cc: David Howells
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Make the softlockup detector purely timer-interrupt driven, removing
softirq-context (timer) dependencies. This means that if the softlockup
watchdog triggers, it has truly observed a longer than 10 seconds
scheduling delay of a SCHED_FIFO prio 99 task.(the patch also turns off the softlockup detector during the initial bootup
phase and does small style fixes)Signed-off-by: Ingo Molnar
Signed-off-by: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
If the change of personality does not lead to change of exec domain,
__set_personality() returned without releasing the module reference
acquired by lookup_exec_domain().Signed-off-by: Sergey Vlasov
Cc: Christoph Hellwig
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails
to report the correct number of blocks used to store the group descriptor
backups in a given group. It happens because meta_bg follows a different
logic from the original ext3 backup placement in groups multiples of 3, 5
and 7.Signed-off-by: Glauber de Oliveira Costa
Cc: Andreas Dilger
Cc: "Stephen C. Tweedie"
Cc: Alex Tomas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when
it should. I don't think we can fix this without a 2.7.x..Cc: Martin Schwidefsky
Cc: Ulrich Weigand
Cc: Cliff Wickman
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero
seconds. But the spec says it should, and that's what 2.4.x does.Fixing this for real would involve some complexity (such as adding a new
it-has-been-set flag to the task_struct, and testing that everwhere, instead
of overloading the value of it_prof_expires).Given that a 2.4 kernel won't actually send the signal until one second has
expired anyway, let's just handle this case by treating the caller's
zero-seconds as one second.Cc: Martin Schwidefsky
Cc: Ulrich Weigand
Cc: Cliff Wickman
Acked-by: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Whitespace cleanups
- Make that expression comprehensible.
There's a potential logic change here: we do the "is it_prof_expires equal to
zero" test after converting it to seconds, rather than doing the comparison
between raw cputime_t's.But given that it's in units of seconds anyway, that shouldn't change
anything.Cc: Martin Schwidefsky
Cc: Ulrich Weigand
Cc: Cliff Wickman
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Drivers have no business looking at the task list and thus using this lock.
The only possibly modular users left are:arch/ia64/kernel/mca.c
drivers/edac/edac_mc.c
fs/binfmt_elf.cwhich I'll send out fixes for soon.
Signed-off-by: Christoph Hellwig
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Remove more unused headers
- Remove various typedefs
- Correct type of PaddrP (physical addresses should be ulong)
- Kill use of bcopy
- More printk cleanups
- Kill true/false
- Clean up direct access to pci BARsSigned-off-by: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Remove more unused headers
- Remove various typedefs
- Correct type of PaddrP (physical addresses should be ulong)
- Kill use of bcopy
- More printk cleanups
- Kill true/false
- Clean up direct access to pci BARsSigned-off-by: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Final polish. There is no more save_flags/cli type locking left. We also no
longer use the pcicopy function and file so they can go.Signed-off-by: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
